SKF 6229EN aktuell

www.lmotion.ru skf@lmotion.ru Тел. (495)-921-34-60Oil lubricationOil quantities for initial lubricationand re-lubricationApply the entire quantity of oilwith a single lubrication impulse!Carriages initially greased at the factorycan also be re-lubricated withoil.If environmental influences suchas dirt, use of coolants, vibration,shock loads etc. are encountered, werecommend that the re-lubricationintervals be shortened accordingly.In the case of carriages whichhave not been initially greased at thefactory, carry out the initial lubricationin accordance with Table 3.Central oil lubricationOil quantities and lubricationimpulses for central oil lubricationNote:Recommended waiting timebetween the impulses:10 seconds.If environmental influences such asdirt, use of coolants, vibration, shockloads etc. are encountered, we recommendthat the re-lubricationintervals be shortened accordingly.Refer to Table 4.Table 3In the case of carriages which havenot been initially greased at the factory,carry out the initial lubricationin accordance with Table 3.SizeOil lubricationInitial lubrication by customerRe-lubricationPart quantity (cm 3 ) Part quantity (cm 3 )15 0,4 (x 2) 0,420 0,7 (x 2) 0,725 1,0 (x 2) 1,030 1,1 (x 2) 1,135 1,2 (x 2) 1,245 2,2 (x 2) 2,2Table 4SizeOil lubricationRe-lubrication intervals under normal operating conditions, v ≤ 1 m/sTravel (km)under load ≤ 0,15 C ≤ 0,3 C15 2 500 60020 2 500 60025 5 000 1 20030 5 000 1 20035 5 000 1 200For example size 45:4 impulses with in each case 0,6cm 3 in 30 seconds.Refer to Table 5.Table 5SizeCentral oil lubricationOil quantitiesImpulse (cm 3 )15 0,6 120 0,6 125 0,6 230 0,6 235 0,6 245 0,6 4Impulses per lubrication cycleNumber of impulses64