Reference manual with Door and I/O module - Videx, Inc.

CyberLocksTable Fields:This page allows new CyberLocks to be added to the system as well as edited. The locks arelisted in rows. Each row contains information about the lock including:Name - The name of the CyberLock.Serial - The serial number of the CyberLock.Change Icon - If the lock is not programmed with access codes a red 'C' icon ( )appears in thecolumn. If the system has information for the lock but the lock has not yet been updated, ayellow 'C' icon ( ) appears. Clicking on the change icon for the lock brings up a change iconreport that compares the current settings for the lock with the new settings.Reset Status - If a lock has been reset, a green check mark will be in the Reset column. If alock has been marked to be reset, but not yet reset, there will be both a yellow change icon anda green check mark.Multi-key Mode / Open Delay - A lock may be set to require more than one CyberKey before itopens or to wait a certain amount of time before opening after an authorized key makescontact.Tagged With - The tags the CyberLock is associated with. Click on a link to open the tag'sProperties page.Note: Once a lock is updated or reset, the Programmer Key or Grand Master that communicatedthe change to the lock must be downloaded to CyberAudit-Web to clear the yellow change icon.Operations -Page Navigation is controlled by the arrows bracketing thelink. Clicking the linkwill open more options including browsing to the first and last pages, selecting a page to jumpto, or the number of locks per page.New - Click to add a new lock.- This icon appears if there is more than one CyberLock in the list. It enablesresetting and tagging all selected locks at once using bulk editing.