TM 9-2920-243-34
TM 9-2920-243-34
TM 9-2920-243-34
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>TM</strong> 9-<strong>2920</strong>-<strong>243</strong>-<strong>34</strong>clearance. It should be 0.187-inch. If not, refer to shaft clockwise to decrease clearance, andfig. 3-4, use the adjusting tool and turn adjusting counterclockwise to increase clearance.Figure 3-43. Measuring drive clutch pinion clearance.Section IV. TESTS AND ADJUS<strong>TM</strong>ENTS3-26. General condition exists, repair the starter withoutWhenever a starter is tested, it should be checkedfurther testing.for any unusual noises or vibration that might 3-27. No-Load Testindicate an unserviceable condition. If either a. Connect starter into test arrangement asshown in figure 3-44.3-19