TM 9-2920-243-34

TM 9-2920-243-34APPENDIX BREPAIR PARTS AND SPECIAL TOOLS LISTSection I. INTRODUCTIONB-1. ScopeThis appendix lists repair parts required for theperformance of direct support and general supportmaintenance of the Electrical Engine StarterAssembly.B-2. GeneralThis Repair Parts and Special Tools List is dividedinto the following sections:a. Section II. Repair Parts List. A list of repairparts authorized for use in the performance ofmaintenance. The list also includes parts whichmust be removed for replacement of the authorizedparts. Parts lists are composed of functionalgroups in ascending numerical sequence, with theparts in each group listed in figure and itemnumber sequence. Bulk materials are listed in NSNsequence.b. Section III. Special Tools List. A list ofspecial tools, TMDE, and support equipmentauthorized for the performance of maintenance atthe organizational level.c. Section IV. National/NATO Stock Numberand Part Number Index. A list, in ascendingnumerical sequence, of all National/NATO stocknumbers appearing in the listings, followed by alist, in alphameric sequence, of all part numbersappearing in the listings. National/NATO stocknumber and part numbers are cross-referenced toeach illustration figure and item number appearance.This index is followed by a cross--reference list of reference designations to figureand item numbers when applicable.B-3. Explanation of ColumnsThe following provides an explanation of columnsfound in the tabular listings:a. Illustration. This column is divided asfollows:(1) Figure number. Indicates the figurenumber of the illustration in which the item isshown.(2) Item number. The number used to identifyeach item called out in the illustration.b. Source, Maintenance, and RecoverabilityCodes (SMR).(1) Source code. Source codes are assigned tosupport items to indicate the manner of acquiringsupport items for maintenance, repair, or overhaulof end items. Source codes are entered in the firstand second positions of the Uniform SMR Codeformat as follows:CodePAPBPCPDPEPFPGKDKFKBMOMFMHMDAOAFAHADDefinitionItem procured and stocked for anticipated orknown usage.Item procured and stocked for insurance purposebecause essentiality dictates that a minimumquantity be available in the supply systems.Item procured and stocked and which otherwisewould be coded PA except that it isdeteriorative in nature.Support item, excluding support equipment,procured for initial issue or outfitting andstocked only for subsequent or additional initialissues or outfittings. Not subject to automaticreplenishment.Support equipment procured and stocked forinitial issue or outfitting to specifiedmaintenance repair activities.Support equipment which will not be stocked butwhich will be centrally procured on demand.Item procured and stocked to provide forsustained support for the life of the equipment.It is applied to an item peculiar to theequipment which, because of probablediscontinuance or shutdown of productionfacilities, would prove uneconomical toreproduce at a later time.An item of a depot overhaul/repair kit and notpurchased separately. Depot kit defined as a kitthat provides items required at the time ofoverhaul or repair.An item of a maintenance kit and not purchasedseparately. Maintenance kit defined as a kit thatprovides an item that can be replaced atorganizational or intermediate levels ofmaintenance.Item included in both a depot overhaul/repair kitand a maintenance kit.Item to be manufactured or fabricated atorganizational level.Item to be manufactured or fabricated at thedirect support maintenance level.Item to be manufactured or fabricated at thegeneral support maintenance level.Item to be manufactured or fabricated at thedepot maintenance level.Item to be assembled at organizational level.Item to be assembled at direct supportmaintenance level,Item to be assembled at general supportmaintenance level.Item to be assembled at depot maintenance level.B-1