(PE) Pipe Performance in Potable Water Distribution Systems

More documents

Recommendations

Info

╣JANAKNOWLEDGE ● VALUES ● SUCCESSFigure 7: Utility Satisfaction Ratings for PE Service Lines – Pre-1980 Date of First Installation23%53%24%Satisfied (4 and 5)Somewhat Satisfied (3)Unsatisfied (1 and 2)Clearly the satisfaction with the oldest generation small diameter PE service lines is nowhere nearwhat it is for current generation materials. Is this simply due to the age of the materials or is there afundamental difference in material performance? To answer this question, performance modelswere developed for older generation PE service lines. These were coupled with the reported time inservice where utilities saw a significant increase in leak frequency for utilities where all thisinformation was available. The results are shown in Figure 8. Similar projections for the sameutilities for current generation PE materials are provided in the section that follows.Of the eight utilities examined, five of the eight are as aggressive as or more aggressive than LasVegas Valley Water District, identified as one of the more aggressive areas in the US due to itsdesert-like conditions and the resultant high ground temperatures. Very good agreement is seenbetween the projected performance and actual field performance (the average time in service to asignificant increase in leak frequency for the eight utilities was 26 years, with a model projection of27 years), indicating that the model is capable of providing realistic projections of actual fieldperformance. It is also observed that the performance of the earliest generation PE service lines inthese aggressive applications is below the desired minimum of 50 to 100 years. As is seen in thenext section, it is also well below the performance projected for current generation materials.Polyethylene (PE) Pipe Performance in Potable Water Distribution Systems – Past, Present and Future Page 9 of 19Jana Laboratories Inc. 280B Industrial Pkwy S. Aurora, Ontario L4G 3T9 Ph: 905-726-8550 Fax: 905-726-8609 www.janalab.com
╣JANAKNOWLEDGE ● VALUES ● SUCCESSFigure 8: Comparison of Observed and Modeled Performance for Pre-1980 PE Pipe Materials75Actual Field Performance (years)502500 25 50 75Projected Field Performance (years)The Last 30 yearsThe results with a date of first installation of PE pipe through the last 30 years (post-1980) aresummarized in Figure 9. Seventy-nine percent of utilities reported being satisfied or very satisfied(ratings of 4 or 5) with their PE service lines, 14% reported being somewhat satisfied (rating of 3)and 7% reported being unsatisfied.Figure 9: Utility Satisfaction Ratings for PE Service Lines with Date of First Installation 1980 to Present7%14%79%Satisfied (4 and 5)Somewhat Satisfied (3)Unsatisfied (1 and 2)Polyethylene (PE) Pipe Performance in Potable Water Distribution Systems – Past, Present and Future Page 10 of 19Jana Laboratories Inc. 280B Industrial Pkwy S. Aurora, Ontario L4G 3T9 Ph: 905-726-8550 Fax: 905-726-8609 www.janalab.com
Page 1 and 2: ╣JANAKNOWLEDGE ● VALUES ● SUC
Page 5 and 6: Figure 2: Projecting Long-Term Agin
Page 9: ╣JANAUtility Rating of PE Perform
Page 15 and 16: Characterization of Exhumed Current
Page 19 and 20: ╣JANAReferencesKNOWLEDGE ● VALU

(PE) Pipe Performance in Potable Water Distribution Systems

Create successful ePaper yourself

Delete template?

Save as template?