7SP300 DIRECTIONAL CONTROL VALVE - Federal Fluid Power, Inc.

PRESSURE DROPCARTRIDGE ONLYFLOW-US GPM0 10 20 30 405050725BASIC CODE:1CEL1405.00 A/F17.00 A/F4058038.00 A/FPRESSURE-BAR302010PILOT OPENFREE FLOW435290145PRESSURE-PSI97.5072.4046.00 A/FM38x2.0PILOT (3)VALVE (2)0SINGLE VALVEBASIC CODE:40 80 120 160FLOW LITRES/MIN1CEL145Body ONLY part numbersBSP, aluminium SAE, aluminium3/4” B201051” B20107 1” B1194620003/4” 1” PORTSBSP, steel3/4” B201061” B20108SAE, steel1” B11947DUAL VALVECYL (1)1” PORTSBASIC CODE: 1CEEL145 (INTERNALLY CROSS PILOTED)Body ONLY part numbersBSP, aluminium SAE, aluminium1” C202851” C30105BSP, steel1” C20287Tightening torque of “F” adjusterlocknut - 20 to 25 NmSAE, steel1” C30106 6C1C2101.6198.60 MAX12.670.0 CRS21322.0101.6198.6 MAX46.0V1C1V2C246.0V182.6V231.863.577.590.031.863.545.0107.02 MOUNTING HOLESØ11.0 THROUGH127.0 CRS152.02 MOUNTING HOLESØ11.0 THROUGHThis valve has been designed to eliminate instability from flexible boom applications or where the load inducedpressure varies greatly. To get the best results, the settings should be adjusted for each application and thenfactory set for production quantities. Please contact Integrated Hydraulics for more information.Where measurements are critical request certified drawingsORDERING CODE EXAMPLEBasic Code1CEL140 = Cartridge Only1CEL145 = Cartridge and Body1CEEL145 = Cartridges and BodyAdjustment MeansF = Screw Adjustment1CEL*** F 6W 30 S 220 60Port Sizes - Bodied Valves Only6W = 3/4” BSP Valve & Cyl Port. 1/4” BSP Pilot Port8W = 1” BSP Valve & Cyl Port. 1/4” BSP Pilot Port16T = 1” SAE Valve & Cyl Port. 1/4” SAE Pilot PortWe reserve the right to change specifications without noticeCounterbalance setting bar(10 bar increments).High pressure setting bar(10 bar increments).SealsS= Nitrile (For use with mostindustrial hydraulic oils)SV = Viton (For high temperature andmost special fluid applications)Pressure Range, bar @ 4.8 l/min20 = 170-320. Std 220 (160/60)30 = 230-380. Std 280 (220/60)40 = 310-380. Std 350 (290/60)6-226.D