Napa 4 in1 Crib Assembly Instruction - Hayneedle

Napa 4 in1 CribAssembly InstructionImportant Information:Read all instructions BEFORE assembling crib.KEEP INSTRUTIONS FOR FUTURE USE.Page 1Made in JW, Vietnam

205# Napa 4 in 1 crib assembly instructions ( JW )SORELLENoted : You will need a cross-point screwdriver. (not included)Right side ( D )Left side ( C )Phillips Screw ( e )Wing Nut ( i )Lock Washer ( g )Phillips Screw ( e )Stabilizer bars ( E )Phillips Screw ( e )page 5Made in JW, Vietnam

205 #Napa 4 in 1 crib assembly instructions ( JW )SORELLE( b )Headboard ( A )( g )( h )( b )( h )( g )( b )( h )( g )Allen Head Bolts ( b )Lock Washer ( h )Flat Washer ( g )Flat( g )( c )( h )( g )Allen Head Bolts ( c)Lock Washer ( h )Flat Washer ( g )page 6Made in JW, Vietnam

205# Napa 4 in 1 crib assembly instructions ( JW )TODDLER BED and FULL SIZE BED ASSEMBLY ( Option Purchase )SORELLENote: The Toddler rail (#136) and Adult rail (#215) are sold separately to convertthe crib to a Toddler bed and a full size bed for your choose.Contact the store where you purchased the crib orvisit www.sorellefurniture.com to locate a dealer near you.Disassembling Crib for StorageTo disassemble crib for storage, follow assembly steps in reverse.Store all parts and hardware together in a safe place. Store the instruction manual in the suppliedenvelope attached to mattress support base for future reference for reassembly.Cleaning and StorageTo clean, use only mild household soap and warm water. DO NOT use bleach or detergent. DONOT use abrasive cleaners which can scratch the finish. Use clean soft cloths to wash, rinse anddry. With proper care, the quality finish will last a long time. Wood surfaces may be treated witha light application of a good grade of non-toxic furniture polish. Read contents on back of polishto make sure polish will not harm unit.Store all parts from Crib, which are not used for Full Size Headboard, in original carton(s) (ifavailable) to prevent damage and allow reuse.page 7Made in JW, Vietnam