CHROME - Zodiac

CHROME
FRONT END 124
OUTER FAIRING 131
INNER FAIRING 132
TANK & DASH 136
FRAME 143
ENGINE 148
REAR END 160
LICENSE PLATES 171

E
A
8635
FRONT END
D
B
ALSO AVAILABLE
1. L.E.D. HALO TRIM RING
PG 50
2. DRIVING LIGHTS
PG 52
3. LIGHTED BAT LASHES
PG 130
W W W . Z O D I A C . N L
C

A. UPPER FORK
SLIDER COVERS
You’d be amazed at the amount of time, materials & labor
required to simply replace the stock stainless fork slider covers
with chrome ones. Our Upper Fork Slider Covers provide the
same shimmering chrome finish, but install in only minutes over
the stock covers - no need to disassemble the front end!
Fits: ’96-’12 Electra Glides, Street Glides, & Trikes
K8635 Chrome - Upper Fork
Slider Covers (set)
K7211 Gloss Black - Upper Fork
Slider Covers (set)
K7218 Gloss Black - Slotted Upper
Fork Slider Covers (pr)
K7219 Chrome - Slotted Upper Fork
Slider Covers (pr)
E
K7789
B. FRONT
FENDER SIDE TRIM
It just keeps getting better! These sleek, chrome
strips are a great addition to your front fender.
Installation is quick & easy getting you back on the
road in no time.
Fits: ’06-’12 Street Glides, ’98-’09 Road Glides,
’10-12 Road Glide Customs, ’11-'12 Road Glide
Ultra, ’10-’11 Street Glide Trikes, ’04-’07 Road King
Customs, ’04-’05 FLHTCSE, ’06-’12 FLHTCUSE,
’00-’01 & ’09 FLTRSE, ’02-’03 & ’08 FLHRSE,
’10-’12 FLHXSE, ’11 FLTRUSE, '12 FLTRXSE, '12 FLD
K7786 Front Fender Side Trim (pr)
C. FRONT
FENDER ACCENTS
The clean, unadorned fenders on many Touring
Models look sharp but could use a little flash.
Our classy fender tips are the perfect chrome
complement to these clean fenders.
Fits: ’06-’12 Street Glides, ’98-’09 Road Glides,
’10-'12 Road Glide Customs, ’11-'12 Road
Glide Ultra, ’10-’11 Street Glide Trikes, ’04-’07
Road King Customs, ’04-’05 FLHTCSE, ’06-’12
FLHTCUSE, ’00-’01 & ’09 FLTRSE, ’02-’03 &
’08 FLHRSE, ’10-’12 FLHXSE, ’11 FLTRUSE, '12
FLTRXSE, & '12 FLD (Leading edge only)
K8642 Leading Edge (ea)
K8643 Trailing Edge (ea)
$ 29.99
D
K7212 A K7218 K7219
A Rendering Shown
D. LOWER LEG
DEFLECTOR SHIELDS
Keep those legs looking good! These irresistible chrome accents not
only look good but also protect your factory lower fork legs from the
notorious “sand blasting” caused by road debris. Installation is effortless
- no tools required. All include Fender Boss Covers except P/N K7765.
TOURING
K7768 Chrome - Fits: ’00-’12 Electra Glides, Road
Glides, Street Glides, Road Kings, & Trikes (pr)
K7209 Gloss Black - Fits: ’00-’12 Electra Glides, Road
Glides, Street Glides, Road Kings, & Trikes (pr)
K7213 Chrome - Fits: '84-'99 Electra Glides, Road
Glides, Street Glides, Road Kings, & Trikes (pr)
SOFTAIL
C B
E. CALIPER COVERS FOR BREMBO CALIPERS
Chrome your calipers without spending a ton of money. Bolt-on in
minutes regardless if the bike has ABS or not. The slotted design
keeps the air flowing so brake performance is unaffected.
Fits: Front Calipers on ’08-’12 Electra Glides, Road Glides, Street
Glides, Road Kings & Trikes; ’06-11 V-Rods (except ’06-’07 VRSCR
Street Rod & ’09-’11 VRSCF V-Rod Muscle)
K7789 Caliper Covers for Brembo Calipers (pr)
K7211
K7765 Fits: ’86-’12 FLST Models (except FLSTSB, FLSTS,
FLSTSC); ’91-’10 FXST, FXSTB, FXSTC; ‘93-’05
FXDWG, & ’06-’12 Dynas (except ’07-’08 FXDSE,
’08-’12 FXDF, ’09-’10 FXDFSE, 12 FLD) (pr)
K7212 Fits: ’86-’12 FLST Models (except FLSTSB, FLSTS,
FLSTSC), ’91-’10 FXST, FXSTB, FXSTC (pr)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 125
D
Rendering
Shown
E
A
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

Fits: ’84-’06 Softails (except Deuce &
Springer), ’80-’99 Electra Glides, Road
Glides, Tour Glides & Road Kings, ’91-’03
Dynas with 39mm forks, ’93-’05 FXDWG,
’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86
FXWG (pr)
Fits: ’00-’07 Electra Glides, Road Glides,
Street Glides & Road Kings, ’04-’07 Dyna
(except ’04-’05 FXDWG & ’07 FXDSE) (pr)
Fits: ’07-’12 Softails (except Deuce, Springer
& Rocker), ’08-’12 Electra Glides, Road
Glides, Street Glides & Road Kings,
’08-’12 Dynas (except ’08 FXDSE), ’08-’12
Sportsters, ’02-’11 V-Rod (except VRSCR &
VRSCF) (pr)
K8630
H I A G
K8625
K8633
A B C D E F G H I
Peaked Roman
GROOVED
Chrome
FORK SKINS
GROOVED
Black/Aluminum
A chromed front end at a fraction of the cost! Our Fork Skins will
chrome out 39mm front ends & provide the improved handling
associated with a fork brace. Quick & easy to install.
K8625 Fits: ’88-’99 Sportster, Dyna & FXR with Single
Disc 39mm Front Ends
K7202 Fits: ’08-’12 Sportster Models (except '09-'12
XL883N, '08 XL1200R, '08-'12 XL1200N, '10-'12
XL1200X, '10-'12 XR1200/X (pr)
LOWER LEG COVERS FOR SOFTAIL
Spun Blade
Pointed
We make chroming your front end quick, easy, & affordable.
Stylized stamped steel covers simply bolt securely into place right
over stock lower legs! The version for ’00-’07 Models also includes
a matching caliper cover.
K8632 Fits: ’86-’99 FLST Models (except Springer) (pr)
K8633 Fits: ’00-’07 FLST Models (except Springer) (pr)
K8634 Fits: ’08-’12 FLST Models (except Springer) (pr)
LOWER LEG ACCENTS FOR TOURING MODELS
U.S. Patent 7,637,520
An easy, low cost way to put a flawless chrome finish your lower legs
(from the fender mounting bosses down) & the brake calipers. Chromed
stamped steel.
K8630 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides &
Road Kings (set)
K8631 Fits: ’08-’12 Electra Glides, Road Glides, Street Glides, &
Road Kings without ABS (set
Note: This set does not include caliper covers.
Spun Blade
Zombie Twisted Stiletto
W W W . Z O D I A C . N L
Nut
Covers
K1224 K1225 K1226 K1227 K1232 K1235 K1217 K1205 K1201
K1224 K1225 K1226 K1227 K1233 K1236 K1218 K1212 K1213
K1224 K1225 K1226 K1227 K1234 K1237 K1219 N/A K1214

F
B
E
K1232
ACTUALLY
SPIN AT
25 MPH!
Rendering
Shown
C
K1226
AXLE CAPS
Clean up your bike's front end with any of
these great looking custom axle caps. Choose
the cap's that best fit your style including the
"Spun Blade" line featuring a unique chrome
spinner that moves as you ride & the Roman
or Peaked series designed to fit an array of
applications. No matter what you choose, any
Küryakyn Axle Cap is sure to add an element
of unparalleled styling to your ride.
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 127
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

798
FRONT FENDER SKIRT ACCENT
DECO FRONT FENDER
REFLECTOR GRILLS
Give your reflectors some much
needed style. Stock reflectors function
with their original intent.
K7792 Fits: ’94-’12 FLHTC,
’94-’12 FLHTCU,
’10 FLHTK, ’94-’96
FLTCU (pr)
FRONT & REAR LENS GRILLS
WITH EMBLEMS
Sometimes less is more. Our lens covers maximize the light’s impact with fine illuminated
slots & two theme emblems. The eyes of the Zombie & the backlighting of the Flame
design shine ominous red for a compelling effect that’s impossible to ignore.
K7795 Front Fender Tip Lens Grill (ea)
Fits: ’80-’12 Electra Glides, Tour Glides, Road Kings, Trikes & '86-’12
FLST Models with Front Fender Tip Lights
K7793 Rear Fender Tip Grill (ea)
Fits: '80- '08 Electra Glides, Tour Glides, Road Kings, & '86-'12 FLST
Models with Rear Fender Tip Lights
K7798 Rear Fender Tip Lens Grill (ea)
Fits: ’09-’12 Electra Glides with Rear Fender Tip Lights
Go from down & dull to classy & chrome! It chromes the lower portion of your front fender without
having to disassemble or even fumble with any tools. Made from chrome-plated stamped steel.
Fits: ’80-’12 Electra Glides, Tour Glides, & Road Kings with original equipment front fender skirt &
’86-’08 FLSTC Heritage Classic, ’86-’90, ’06 FLST Heritage; & ’93-’96 FLSTN Heritage Nostalgia or
Special with original equipment front fender skirt
K7794 Front Fender Skirt Accent (ea)
9012
FENDER TIPS
These fender tips add a nostalgic touch to any bike in seconds! Models are available
to fit most OEM H-D fenders. Simple installation requires no drilling & can be done
without any tools. A great way to cover dinged fender tips.
K9012 Fits: Narrow H-D Front Fenders on FXST, XL, FXDWG, Dyna, & FXR
Models (Leading Edge) (ea)
K9013 Fits: All ’90-’12 Fat Boy Front Fenders (Leading Edge) (ea)
K9014 Fits: All ’90-’12 Fat Boy Front Fenders (Trailing Edge) (ea)
K9015 Fits: ’90-’06 Fat Boy Rear Fenders (except ’06 FLSTFSE) (ea)
K7787 Fits: ’07-’12 Fat Boy, '10-'12 Fat Boy Lo & ’06 FLSTFSE Rear Fenders (ea)
128
K7795
K7793
K9013
K7787
FENDER EXTENSION
FOR NARROW FRONT FENDERS
FENDER TIP LENS GRILLS
This unique design embeds custom
emblems in a bold chrome grill. Each set
includes both front & rear lens grills.
Fits: ’80-’08 Electra Glides, Tour Glides,
Road Kings & ’86-’12 FLST Models with
front & rear fender tip lights
K8606 Zombie (pr)
INTERCHANGEABLE
EMBLEMS!
Enjoy a dryer ride in the rain, a cleaner engine, & a
subtle hint of sparkle. A molded-in contour hugs the
stock H-D narrow fender tightly for a look so clean
you’d swear it was part of the original fender!
Fits: Narrow H-D front fenders on FXST, XL,
FXDWG, Dyna & FXR Models
K9016 Front Fender Extension (ea)
W W W . Z O D I A C . N L

8135
K8134
K1291
FULL COVERAGE CALIPER COVERS
K1291 Front Caliper Cover (ea)
Fits: All ’84-’99 Models, ’00-’07 FLSTS/
FLSTSC/FXSTS, & ‘08-’11 FLSTSB
CHROME HUB FILLER-
SPEEDO DRIVE COVER
Fits: ’87 to ’96 Softails (except Fatboy) & ’93-’96
Wide Glides
K8134 Chrome Speedo Drive Cover Fits
all Models to ’95 (except 39mm
front ends) (ea)
K8135 Speedo Drive Cover for 39mm
Narrow Glide Front Ends (ea)
BRAKE BLEEDER SCREW &
BANJO BOLT COVERS
K2013 Bleeder Screw Cover (pr)
Fit: All ’84-’12 stock H-D calipers
(except ’08-’12 Touring)
K2014 Banjo Bolt Cover (ea)
Fits: ’84-’12 H-D master cylinder
& calipers (except ’08-’12 Touring
master cylinder & caliper, ’08-’12
Softail & Dyna calipers & ’04-’12
XL master cylinder & caliper)
ZOMBIE MEDALLIONS
K1491 Large Zombie (Requires
2” of flat surface for
mounting) (pr)
Note: Replacements for
Küryakyn Saddlebag Latch
Accents (P/N K1595).
K1492 Small Zombie (Requires
1” of flat surface for
mounting) (pr)
Note: Replacements for
Küryakyn P/N’s K1047, K1058,
K1060, K7520, K7521, &
K8606
Note: See additional Medallions on pg 133.
K2013
K2014
B K7333
FENDER ORNAMENTS
A. FRONT FENDER SPEAR Patent Pending
Measures 1-1/4" Wide x 8" Long. Peel-&-stick application.
CHROME
REFLECTOR COVERS
Fits: Front Downtubes: All
’92-’08 H-D Touring Models
(Electra Glides, Road Kings,
etc.), all ’91-’99 Softail Models,
& all ’91-’99 Sportster Models
- Other motorcycles with
reflectors that are 3-5/16” by
1-1/4” or smaller with 1/4” of
clearance around the reflector
K9001 Chrome Reflector
Covers (pr)
K7332 Fits: Late Model Touring Models & Softails - Universal
Front Fenders with approximately 15-1/4” radius (ea)
B. DECO EAGLE FENDER ORNAMENT
Light weight ABS design. Peel-&-stick application.
K7333 Fits: Late Model Touring Models & Softails - Universal
Front Fenders with approximately 15-1/4” radius (ea)
C. ORNAMENTS
Majestically sculpted with lighted eyes!
K9022 Wild Boar (ea)
K9026 Eagle (ea)
C C
K9026 K9022
FORK BRACE
FOR WIDE GLIDE®
By reducing fork flex, one can enjoy more
aggressive, controlled cornering, smoother ride,
& straighter, more predictable hard stopping.
K8620 Fits: 41mm Wide
Glide Front Ends
found on ’80-’86
FXWG, ’93-’05
FXDWG, & ’85-’10
FXST Models (except
Springer, Deuce,
Rocker/C) (ea)
A
K7332
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 129
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

K1198
K1199
K1379
D
C
A. BAT BROW
Fits: ’96-’12 Electra Glides,
Street Glides, & Trikes
K7796 Bat Brow (ea)
Patent Pending
D. RUN-TURN
EDGE ACCENTS
FOR BATWING FAIRING Patent Pending
K3724
A nice subtle touch of chrome & additional lighting to create a unique
look. Perfectly contoured to follow the lines of the outer edge on the
inner fairing, the addition of auxiliary run & turn lighting make this a
must have. Installation requires no drilling or modification to the fairing.
K3724 Fits: ’96-’12 Electra Glides, Street Glides, & Trikes (pr)
B. BAT LASHES
Fits: ’96-’12 Electra Glides, Street Glides, & Trikes
K8695 Chrome - Bat Lashes (pr)
K7269 Black Chrome - Lighted Bat Lashes (pr) Patent Pending
K7753 Chrome - Lighted Bat Lashes (pr) Patent Pending
C. WINDSHIELD TRIMS
Fits: ’96-’12 Electra Glides, Street Glides, Trikes, Küryakyn AirMaster Fairing
K1379 Deluxe Windshield Trim (ea)
K1189 Replacement
Emblem for Zombie
K1199 Eagle Windshield Trim (ea)
Windshield Trim (ea)
K1198 Zombie Windshield Trim (ea)
K1342 Replacement Caps for Deluxe
Windshield Trim (ea)
A
B
K1369 Windshield
Mounting Spikes
- 1/4-20 x 5/8”
(set/3)
W W W . Z O D I A C . N L

K7796
K7269
ALSO AVAILABLE
1. L.E.D. HALO TRIM RING
PG 50
2. L.E.D. HIGH
INTENSITY HEADLAMPS
PG 50
3. DRIVING LIGHTS
PG 52
B
OUTER
FAIRING
BRING YOUR BATWING
FAIRING TO LIFE!
The keys to good looks are keeping it simple &
highlighting the contours. Choose any or all of
our simple to install, brilliant chrome accents to
give your fairing a bold new style!
4. UPPER FORK
SLIDER COVERS
PG 125
5. WINDSHIELDS
PG 198-199
A
C K1379
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 131
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

INNER FAIRING
E
K3782
A
DELUXE GAUGE BEZELS
Our Bezels blend beautiful chrome rings with
tasteful, colored accents. The rubber-like accent is
captured by the press-on chrome ring. Each pair
of bezels includes black, red, & blue accents.
K3781 Large Deluxe Gauge Bezels
with Colored Accents (pr)
Fits: ’00-’12 Electra Glide, Road
Glide, Street Glide, & Trikes
speedometers & tachometers
K3782 Small Deluxe Gauge Bezels
with Colored Accents (pr)
Fits: ’86-’12 Electra Glide, Road
Glide, Street Glide, & Trikes
voltmeter, oil pressure, air
temp, & fuel gauges
D
C
K7210
K3785
pg 134
INNER COVER PLATES
K881 & K882
pg 27
K3767
Our stylized accents cleverly cover the mounting
holes left by stock mirrors. High strength peel-&-stick
adhesive makes installation a snap.
Fits: ’06-’12 Street Glides & ’10-’11 Street Glide Trikes
K3767 Chrome (pr)
K7210 Gloss Black (pr)
W W W . Z O D I A C . N L

K6321
pg 71
Rendering Shown
INNER FAIRING
The problem with beautiful scenery on any ride is that once you pass
it, it’s gone. Well here’s one great view that’ll be with you every time
you’re in the saddle!
Fits: ’96-’12 Electra Glides, Street Glides, & Trikes
A. SPEEDO & TACH BROW
Undemanding & understated. Its thin profile allows for a perfect
highlighted contour without being too much.
K7746 Speedo & Tach Brow (ea)
B. INNER FAIRING ACCENT
K3766 Inner Fairing
Accent (ea)
D. STEREO ACCENT
K3765 Stereo Accent (ea)
E. SPEAKER GRILLS
K3787 Zombie (pr)
K3788 Flame (pr)
K3789 Widow (pr)
K3790 Chauvinist (pr)
K3793 Deco (pr)
K3794
K3787
K3788
K3787
C. SWITCH PANEL ACCENT
U.S. Patent D629,337
K3783 Switch Panel
Accent (ea)
K3794 Patriot (pr)
K3751 Helicopter
Gunship (pr)
K3753 Firefighter (pr)
Single Medallions sold on page 218. P/N's K3713
& K3714 are sold as single Medallions Only.
INNER
FAIRING COVERS FOR FLHT
Is your inner fairing dull or sun-faded in this area? Here's an instant fix
to make this area even better than new! Peel-&-Stick!
Fits: ’96-’12 Electra Glides & ’09-’12 FLHTCUTG Tri Glide
Ultra Classics
K7267 Inner Fairing Covers (pr)
K3714
K3751
K3753
B
K3713
K3793
K3790
Rendering Shown
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 133
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

FAIRING CHROME
FOR ROAD GLIDE
134
K8649
K1371
K7768
WINDSHIELD TRIM FOR ROAD GLIDE
Three-piece set provides a smooth, flowing bridge from the fairing to the windshiel
Fits: ’98-’12 Road Glides
K1370 Windshield Trim for Road Glide (ea)
K1371 Deluxe Windshield Trim for Road Glide (ea)
Interchangeable Zombie or Maltese Cross Emblems Included
FAIRING TRIM FOR ROAD GLIDE
Making the most out of the sleek lines of this bike, our curvaceous chrome
molding installs easily with high-strength peel-&-stick adhesive, & the integrated
L.E.D. supplemental run/turn lights simply plug into existing wiring.
K8649 Fits: All ’98-’12 Road Glides (pr)
K8649
K7789
K1370

C
A. NACELLE ACCENTS
FOR ROAD GLIDE
D. GAUGE BEZELS FOR 2” GAUGES
Here's a spice that appeals to the more gourmet. Three selections
available to please the more discerning custom palate.
Fits: ’86-’12 volt meter, oil pressure, air temp or fuel gauge on
Electra Glides, Tour Glides, Road Glides, Street Glides, & Trikes
K3784 Chauvinist (pr)
K3785 Twin Ring (pr)
K3768 Illiana (pr)
A
This kit totally transforms the appearance of the Road Glide
speedometer, tach, & fork nacelle. The main cover envelops
the gauges & indicator lights with an elegantly sculpted
shroud while the four individual accent pieces decorate the
edges of the nacelle.
Fits: ’98-’12 Road Glides
K3780 Nacelle Accents for Road Glide (set)
K3750 Switch Panel/Fork Accents Only (4 pcs)
B. GLOVE BOX ACCENTS FOR ROAD GLIDE
At first glance you’ll notice the difference; glove box doors that
stand out instead of disappearing into the flat background. Also
makes opening the doors a snap - even with gloves on!
K3769 Fits: ’98-’12 Road Glides (pr)
C. SPEAKER GRILLS FOR ROAD GLIDE
Plain black mesh speaker covers were pretty boring until
now! Installs in seconds. Easily substitute our Chauvinist,
Illiana, or Twin Ring 2” Gauge Bezels (below) for the three
spoke insert.
K3791 Fits: ’98-’12 Road Glides (pr)
D
A
B
C
D
D
D
K3791
K3784
B
K3769
K3780
K3785
K3768
135
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

TANK & DASH
ring
wn
DECO L.E.D. FUEL &
BATTERY R GAUGE
BATTERY GAUGE U.S. Patent 7,652,563
The ultimate combination of form & function. The
sparkling L.E.D.’s let you easily judge your fuel &
battery levels out of the corner of your eye. A perfect
match to our stunning new Deco Gas Cap.
K7281 Fits: Replaces stock fuel gauge
on ’94-’12 Road Kings, ’00-’12
Softails, & ’91-’12 Dynas (ea)
(except console mounted gauges)
Rendering
Shown
DECO GAS CAP
Add instant pizzazz to your gas tank. The sleek & stylish
design looks great with almost any paint scheme. Complete the
transformation with our Deco Fuel & Battery Gauge (above).
K7280 Fits: ’82-’12 H-D Screw-type Tanks
– R.H. Thread – Vented (ea)
FUEL LINE FITTING COVER
Cover up the plumbing on your fuel injected bike with this
two-piece streamlined beauty.
Fits: ’01-’12 Fuel Injected Softails, ’02-’12 Fuel Injected Electra
Glides, Road Glides, Street Glides, Road Kings, & Trikes,
’04-’12 Fuel Injected Dynas, & ’07-’12 Fuel Injected Sportsters
K1521 Fuel Line Fitting Cover (ea)
K1535 Replacement O-rings (pr)
K8669
K8671 K8667
REPLACEMENT GAS CAPS
Vented or non-vented, these chrome-plated
gas caps are a fraction of the cost of stainless
steel caps.
Fits: All H-D screw type tanks from ’96-’12
K8667 Peaked Low Profile Gas Cap (R.H.
Thread) - Vented (ea)
K8668 Peaked Low Profile Gas Cap (L.H.
Thread) - Non-Vented (ea)
K8669 Stock Style Gas Cap (R.H. Thread) -
Vented (ea)
K8670 Stock Style Gas Cap (L.H. Thread) -
Non-Vented (ea)
K8671 Domed Low Profile Gas Cap (R.H.
Thread) - Vented (ea)
K8672 Domed Low Profile Gas Cap (L.H.
Thread) - Non-Vented (ea)
FLUSH MOUNT GAS CAPS U.S. Patent D400,838
Features an ultra slim keyed profile with a built in trim to protect the painted surface &
prevent tampering. Replaces your stock gas cap.
Fits: All H-D screw type tanks from ’82-’12
K8309 Flush Mount Gas Cap (R.H. Thread) - Vented (ea)
K8310 Flush Mount Gas Cap (L.H. Thread) - Non-Vented (ea)
K8311 Replacement Key for 8309 & 8310 (ea)
K1467
PUSH BUTTON
FUEL DOOR LATCH
Fumbling with your keys in the dark while
trying to get your gas door open is not
anyone’s idea of fun. Add our Push Button Fuel
Door Latch & make getting to the gas cap easy! It’s a
direct replacement for the stock key-lock fuel door latch.
Fits: All ’92-’12 Electra Glides, Road Glides, Street Glides,
Tour Glides, & Trikes
K1467 Push Button Fuel Door Latch (ea)
THE MARQUIS
CHOKE KNOB
U.S. Patent 5,836,214
Our choke knob cover installs neatly
over the stock black plastic unit. Not
only does it look 100% better, it’s
easier to find & get a hold of!
K2009 Fits: All ’88-’06 XL
Models & ’90-’06
Big Twin with stock
carburetors (ea)
W W W . Z O D I A C . N L

L.E.D. BATTERY GAUGE
Keep your charging system in check with an array of red,
amber & green L.E.D.'s to let you know if your bike is operating
within 12.5v to14.5v as normal, drops below 10v or exceeds
15v. Simple two-wire connection & a compact size (about 2”
x 3/4” x 3/16”) make installation a breeze. A daylight sensor
automatically adjusts the brightness of the L.E.D.’s.
K4219 L.E.D. Battery Gauge, Chrome (ea)
K4218 L.E.D. Battery Gauge, Black (ea)
K1513
FORK LOCK COVER
FOR ROAD KING
Protection & beauty to keep debris from
getting into your Road King’s fork lock
mechanism at an affordable price.
K1513 Fits: All ’94-’12 Road
King Models (ea)
Note: Might need to modify key slightly to operate
lock mechanism.
DASH
PANEL INSERTS
Simple custom covers that makes
a huge difference.
K1520 Fits: ’94-’07 Road Kings (except
’04-’07 FLHRS & ’07 FLHRSE) (ea)
K1522 Fits: ’00-’08 FLSTC, ’06 FLST, ’05-’12
FLSTN, ’00-’12 FLSTF, ’10-’12 FLSTFB,
’05-’07 FLSTSC, ’00-’03 FLSTS,
’07-’10 FXSTC, ’00-’08 FXST, ’00-’09
FXSTB, ’00-’06 FXSTS, ’93-’03
FXDWG) (ea)
INFORMER L.E.D. FUEL &
BATTERY GAUGE U.S. Patent 7,652,563
A perfect match to our Flush Mount Gas Cap, The Informer’s sleek,
low profile design incorporates both an L.E.D. fuel gauge & an L.E.D.
battery gauge. The fuel gauge has a string of color coded L.E.D.’s
to indicate fuel level & our patent pending design allows the rider to
select the fuel level at which the red “empty” L.E.D. illuminates.
Fits: Replaces stock fuel gauge on ’94-’07 Road Kings, ’00-’07
Softails, & ’91-’08 Dynas (except console mounted gauges)
K8375 Informer L.E.D. Fuel & Battery Gauge (ea)
K4015
SPEEDOMETER VISORS
K112 Fits: ’68-’12 H-D Models with Large FL-Style
Tank-Mounted Speedo (FLH, FXWG, Softails, Dyna Wide
Glide, ’94-’07 Road Kings) (ea)
K4015 Fits: Speedometers & tachometers with a 3-3/4” O.D. &
7/16” exposed side wall. Fits perfectly on Road Glides,
’04-’10 Sportster Customs, & many other bikes (ea)
K1522
K1520
K112
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 137
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

®
MEDALLION
BOTH BAGGER & 5” CONSOLE GAUGES OFFER THESE GREAT FEATURES:
USA
®
PREMIUM
BAGGER GAUGES®
�����������������������������������������������������������������
�������������������������������������������������������������
������������������������������
������������������������������������������������������������� �
Telltales Hidden in the Graphics
PREMIUM BAGGER GAUGES PREMIUM 5” CONSOLE GAUGES
Fits: ‘96-’03 * Fuel Injected
Electra Glide & Road Glide &
‘96-’06* Carbureted Electra
Glides, Road Glides, Street
Glides
USA
Fits: ’04-’12 Fuel Injected
Electra Glides, Road Glides
(except ‘12 FLTRXSE**), Street
Glides (except ’11-’12
FLHXSE**), & Trikes
PREMIUM
PRE
5” CONSO CONSOLE GAUGE
Fits: ‘96-’06 Carbureted Softails, ‘01-’03
Fuel Injected Softails, ‘96-’06 Carbureted
Road Kings, ‘96-’03 Fuel injected Road
Kings, ‘96-’06 Carbureted Dynas with 5”
Fuel tank mounted Speedometer
Fits: 04-’10 Fuel Injected
Softails, ’04-’12 Fuel Injected
Road Kings & ’04-’11 Fuel
Injected Dynas with 5” Fuel
Tank Mounted Speedometer
STYLE
USA K4676 K4280 K4699 K4292
Red Tradition K4677 K4275 K4698 K4298
Sundown K4678 K4276 K4697 K4297
Skull K4687 K4285 K4696 K4291
Racing White K4683 K4283 K4695 K4290
Racing Black K4684 K4279 K4694 K4296
P.O.W. K4681 K4282 K4693 K4289
Just Black K4686 K4286 K4692 K4295
Flames K4680 K4277 K4691 K4294
Classic Blue K4685 K4284 K4690 K4288
Classic Red K4679 K4281 K4689 K4287
Blue Tradition K4682 K4278 K4688 K4293
*: '96-'98 models require cable pulse generator - Not available from Küryakyn. ** : Will work on these models, however, 2 gauges will not be used.
138
GAUGES
SKULL
����������������������������������������������������������
1-6, Low Fuel, Battery, Cruise, One-time Programmable
Odometer, Two Trip Odometers, & Programmable Service
Reminder Odometer
�������������������������������������
RED
TRADITION
W W W . Z O D I A C . N L
Requires Medallion Riser Pod
for installation - Included

JUST BLACK
ADDITIONAL FEATURES FOR PREMIUM BAGGER GAUGES:
������������������������������������������������������������������������������������� �
Fuel, Volt, & all necessary Wire Harnesses & Brackets. (Oil Temp Gauge Replaces
Factory Air Temp Gauge & Includes Sensor & Wire Harness)
�����������������������������������������������������������������������������
P.O.W. FLAMES
SUNDOWN RED TRADITION BLUE TRADITION
CLASSIC RED CLASSIC BLUE RACING WHITE RACING BLACK
JUST BLACK
SKULL
MEDALLION MOTORCYCLE GAUGES ARE DESIGNED & BUILT IN SPRING LAKE, MICHIGAN BY
MEDALLION INSTRUMENTATION SYSTEMS, OEM SUPPLIER OF FEATURE RICH & DISTINCTLY STYLED
INSTRUMENTATION SOLUTIONS FOR MILITARY, MARINE, COMMERCIAL, & RECREATIONAL MARKETS.
KÜRYAKYN IS EXCITED TO BE OFFERING THESE BEAUTIFUL & HIGH-QUALITY GAUGE KITS FOR
MOST '96-PRESENT HARLEY-DAVIDSONS.
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 139
USA
®
BIKE BI B KE MAPS
AUDIO AU A D
LIGHTING
LI L G H
ACCESSO
AC A C
MOUNTS MO M U
HANDLEBA
HA H N
CONTROLS
CO C N
FOOT FO O
CONTROLS
CO N
CHROME CH CHR
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

REFERENCE GUIDE
ENGINE & FRAME CHROME FOR ELECTRA GLIDE, ROAD GLIDE, STREET GLIDE, ROAD KING
Head Bolt Covers
Kool Kaps
Mid-Frame Covers
Lower Front Frame Cover
Oil Cooler Cover
Regulator Cover
Neck Covers
Starter Mount Cover
Starter Cover
Tappet Block Accent
Transmission Shrouds
Oil FiIler Spout
Rear Cylinder Base Cover
Cylinder Base Cover
Inner Primary Cover
PG 154 155 152 151 151 149 153 153 143 146 147 145 162 159 158-59
'05 K8294 K8143 K8274 K8264 K8201 K8389 K7846 2
N/A K7866 K1547 N/A K7772 K8239 K2450 K7254/57
'06 K8294 K8143 K8274 K8264 K8201 K8389 K7846 2
N/A K7866 K1547 N/A K7772 K8239 K2450 K7254/57
'07 K8397 K8392 K8394 1
N/A
K7877 or
K7876
K8389 K7847 2
N/A K7866 K1547 N/A K7772 K8239 K2450 K7254/57
'08 K8397 K8392 K8394 1
N/A
K7877 or
K7876
K8389 K7847 2
N/A K7834 K1547 N/A K7772 K7842 K2450 K7254/57
'09 K7780 K8392 K8694 N/A K8654 K8389 K7847 2 K7779 K7832 K1547 N/A K7772 K8609 K2450 K7254/57
'10 K7780 K8392 K8694 N/A K8654 K8389 K7847 2 K7779 K7832 K1547 N/A K7772 K8609 K2450 K7254/57
'11 K7780 K8392 K8694 N/A K8654 K8389 K7847 2 K7779 K7832 K1547 K7784 K7772 K8609 K2450 K7254/57
'12 K7780 K8392 K8694 N/A K8654 K8389 K7847 2 YEAR
K7779 K7832 N/A K7784 K7772 K8609 K2450 K7254/57
1. Requires Küryakyn Transmission Shroud (P/N K7877 or K7876) for installation 2. For Screamin' Eagles please use part numbers K8638 or K8639

ENGINE & FRAME CHROME FOR SOFTAIL
Kool Kaps
Boomerang Frame Covers
Kickstand Mount Cover
Regulator Cover
Downtube Covers
Neck Covers
Oil Line Cover
Tappet Block Accent
Transmission Shrouds
Oil Line Nacelle
Rear Cylinder Base Cover
Cylinder Base Cover
Inner Primary Cover
PG 154 155 153 150 150 149 150 144 144 147 145 161 159
'00 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 N/A N/A K7851 K2450
'01 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'02 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'03 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'04 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'05 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'06 K8291 K8143 N/A K8204 K8205 1
K8389 K7203 3
K8163 3
K7853 K7839 N/A K7851 K2450
'07 K8398 3
K8393 K8656 2
K8395 K7878 K8389 K7203 3
K7833 3
K7863 K7839 K7754 4
K7851 K2450
'08 K8398 3
K8393 K8656 2
K8395 K7878 K8389 K7203 3
K7833 3
K7863 K7839 K7754 4
K7773 K2450
'09 K8398 3
K8393 K8656 2
K8395 K7878 K8389 K7203 3
K7833 3
K7863 K7839 K7754 4
K7773 K2450
'10 K8398 3
K8393 K8656 2
K8395 K7878 K8389 K7203 3
K7833 3
K7863 K7839 K7754 4
K7773 K2450
'11 K8398 3
K8393 K8656 2
K8395 K7878 K8389 K7203 3
K7833 3
K7863 K7839 K7754 4
K7773 K2450
'12 K8398 K8393 K8656 K8395 K7878 K8389 K7203 K7833 3
K7863 K7839 K7754 4
YEAR
K7773 K2450
1. Does not fit models with hydraulic clutch 2. Except Rocker/C or FLSTSC with stock head pipes 3. Except Rocker/C 4. FLST Models Only
141
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

ENGINE & FRAME CHROME FOR DYNA
Kool Kaps
Rocker Box Bolt Covers
Neck Covers
Starter Connector Plug
Cover
Scorpion Head Bolt
Covers
Tappet Block Accent
Transmission Shrouds
Cylinder Base Cover
Inner Primary Cover
PG 154 155 150 149 158 158 144 159 159
'00 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'01 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'02 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'03 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'04 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'05 N/A K81431 K8208 K8389 K8323 K1315 N/A K8693 K2450
'06
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 K1315 K7836 K8693 K2450
'07
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 N/A K7836 K8693 K2450
'08
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 N/A K7836 K8693 K2450
'09
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 N/A K7836 K8693 K2450
'10
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 N/A K7836 K8693 K2450
'11
K83774 /
K83991 K8392
K78372 /
K78383 K8389 K8323 N/A K7836 K8693 K2450
'12
K83774 /
K83991 K8392
K78372 /
K78383 YEAR
K8389 K8323 N/A K7836 K8693 K2450
1. Dyna with forward controls 2. Dyna with stock exhaust support bracket 3. Dyna with aftermarket exhaust 4. Dyna with Mid-Controls
Head Bolt Covers
Tappet Block Covers
Cylinder Base Cover
Clutch Cable
Ferrule Accent
Tappet Block Accent
Starter Cover
Inner Primary Cover
ENGINE & FRAME CHROME FOR SPORTSTER
YEAR
PG 155 153 149 158 155 149 150-159
'99 N/A N/A N/A 2024 8141 8124 8315
'00 N/A N/A N/A 2024 8141 8124 8315
'01 N/A N/A N/A 2024 8141 8124 8315
'02 N/A N/A N/A 2024 8141 8124 8315
'03 N/A N/A N/A 2024 8141 8124 8315
'04 7781 7783 N/A 2024 N/A N/A 8106
'05 7781 7783 N/A 2024 N/A N/A 8106
'06 7781 7783 7782 2024 N/A N/A 8106
'07 7781 7783 7782 N/A N/A N/A 8106
'08 7781 7783 7782 N/A N/A N/A 8106
'09 7781 7783 7782 N/A N/A N/A 8106
'10 7781 7747 7782 N/A N/A N/A 8106
'11 7781 7747 7782 N/A N/A N/A 8106
'12 7781 7747 7782 N/A N/A N/A 8106
W W W . Z O D I A C . N L

FRAME
K7865
K8146
K7832
K7866
DELUXE NECK COVERS
Just the right touch of edge & functionality. Hide those welds & wires in
one quick & easy step.
K7834 Fits: ’08 Electra Glides, Road Glides, Street
Glides & Road Kings (set)
U.S. Patent D635,061
K7832 Fits: ’09-’12 Electra Glides, Road Glides, Street
Glides & Road Kings (set)
U.S. Patent D635,061
K7866 Fits: ’95-’07 Electra Glides, Road Glides, Street
Glides, Tour Glides & Road Kings (set)
U.S Patent 7,762,586 & D591,207
K8146 Fits: ’95-’05 Electra Glides, Road Glides, Tour
Glides & Road Kings (set)
NECK COVERS ONLY - GLOSS BLACK
K7865 Fits: ’95-’07 Electra Glides, Road Glides, Street
Glides, Tour Glides & Road Kings (pr)
U.S Patent 7,762,586 & D591,207
K7834
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 143
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

NECK COVERS FOR DYNA
FRONT UPPER
STABILIZER LINK COVER
Simply add this Front Upper Stabilizer
Cover & you’ll enjoy a flashy new look
to complement the improved function!
Simple installation requires no tools.
K8697 Fits: ’08-’12 Electra
Glides, Road Glides,
Street Glides, Road
Kings, & Trikes (ea)
NECK COVERS
FOR HERITAGE, FAT BOY, DELUXE, & DEUCE
Masking the roughly finished forged frame
neck on a Twin Cam Softail is now as easy
as two screws & a few minutes of your time.
K7831
We’ve designed smooth & cleanly contoured
stamped steel neck covers to work on Softail
Models equipped with fork tins (Heritage, Fat
Boy, etc.) & Deuces. These beautifully chromed covers mask the
wiring, giving your bike’s neck a finished appearance.
K7854 Fits: ’00-’07 Deuce (set)
K7831 Fits: ’86-’99 FLSTC, FLSTF, FLSTN (set)
K8163 Fits: ’00-’06 FLST, FLSTC, FLSTF, FLSTN (set)
K7833 Fits: ’07-’12 FLSTC, FLSTF, FLSTFB, FLSTN (set)
Note: These covers do not fit FLSTS, FLSTSC, or FLSTSB Models.
DOWN TUBE COVERS FOR SOFTAIL
By popular request! Hundreds of you asked us to develop these for the Softail
when you saw the ones we made for the baggers. Snap-on installation makes
this an easy way to chrome the front frame down tubes.
K7843 Fits: ’92-’99 Softail Models (set)
K7853 Fits: ’00-’06 Softail Models (set)
K7863 Fits: ’07-’12 Softail Models (except Rocker/C) (set)
We developed this stylized chrome cover to put a visually pleasing face on this beefy section of
the Dyna frame. Welds, square edges, joints & wires are neatly hidden from view.
K7836 Fits: ’06-’12 Dyna Models (except ’06-’08, ’10-’12 FXDWG, & '12 FLD) (set)
144
K8163
K7853
FUEL TANK
CROSS-OVER LINE COVER
Goes on in minutes, is easy to keep clean,
easy to work with, & nothing else available
will look this sweet!
Fits: ’95-’07 Electra Glides, Road Glides,
Street Glides, Tour Glides & Road Kings
K8673 Fuel Tank
Cross-Over
Line Cover (ea)
K8673
DOWNTUBE
CROSSBRACE COVER FOR TOURING
Everyone loves the look of a fully chromed front
end. Add shine to yours with these chrome-plated,
stamped steel downtube crossbrace covers. Covers
both the front & back sides of the downtube’s
crossbrace above the regulator.
Fits: ’99-’12 Electra Glides, Road Glides, Street
Glides, Road Kings & Trikes
K7774 Downtube Crossbrace Cover (ea)
W W W . Z O D I A C . N L

K7754
K1099
K7897
K7772
BRIDGE THE GAP
HEAT SHIELD U.S. Patent D523,787
Take the blues away with this perfectly designed
heat shield. Quickly & easily installed, this piece
integrates seamlessly & bridges the ugly gap
left between the stock heat shields.
Fits: ’93-’08 Electra Glides, Road Glides, Tour
Glides, Street Glides & Road Kings with stock
head pipes & heat shields
K9196 Bridge the Gap Heat Shield (ea)
LOWER FRONT FRAME COVERS
Engineered to shroud the lower portion of your bike frame, these distinctive chrome-plated
covers hide the kickstand assembly, front engine stabilizer & the footboard mount. Instantly
simplifies a usually unsightly area of the bike.
K7897 Fits: ’91-’08 Touring Models without fairing lowers or oil coolers (ea)
K7772 Fits: ’91-’12 Touring Models with or without Fairing Lowers &/or Oil Coolers (ea)
K7754 Fits: ’07-’12 FLSTC Heritage Softail Classic, ’07-’12 FLSTF Fat Boy, ’10-’12 FLSTFB
Fat Boy Lo, ’07-’12 FLSTN Softail Deluxe, ’08-’11 FLSTSB Softail Cross Bones, ’07
FLSTSC Springer Classic, ’10-’12 FLSTSE CVO Softail Convertible (ea)
Patent Pending
KICKSTAND COVERS
Utilizing the stock kick stand, these easy to install covers feature a rustic antique
pewter finish. For even more style add the Serpent Shift Linkage (P/N 1079).
Fits: ’91-’06 Electra Glides, Road Glides,
Street Glides, Tour Glides, & Road Kings
K1098 Silhouette (ea)
K1099 Raptor (ea)
INSTALLS IN MINUTES - RIGHT
OVER YOUR STOCK STAND!
K1098
AFTER BEFORE
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 145
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

8655
B
K8653
C K8655
K8651
K1547
E K2017
B. REAR MASTER CYLINDER COVER
The super clean one-piece design covers everything – even the small related
components. Simple, quick installation uses only two fasteners.
K8653 Fits: All '08 Touring Models & '09-'12 Touring Models WITHOUT Fairing
Lowers (except Trikes) (ea)
K7769 Fits: All ’09-’12 Touring Models WITH Fairing Lowers (except Trikes) (ea)
K9128 Fits: ’99-’07 Electra Glides, Road Glides, Street Glides, Road Kings,
’09-’12 Trikes, & ’00-’12 Softails (ea)
C. OIL PRESSURE SENDER COVER FOR TWIN CAM
The difference is in the details! The simple addition of this finely sculpted chrome
accessory adds life to the dull cast finish surrounding it.
K8655 Fits: ’07-’12 Electra Glides, Road Glides, Street Glides & Road Kings,
’00-’12 Softails & ’06-’12 Dynas (ea)
Note: Not compatible with oil coolers.
K8651 Fits: ’99-’06 Road Kings (except
’03 FLHRSE & ’00-’06 FLHT Standards (ea)
A
K8653
A. REGULATOR COVER
FOR TOURING MODELS
A complete cover for your stock voltage regulator.
Two-piece design uses a stamped steel base & a
chrome composite top. Open & well-vented design
keeps your regulator running cool. Two functional
& decoratively shaped chrome fasteners add the
finishing touch.
Go ahead & light ’er up! The open & vented design
looks awesome when lit from the inside! We’ve left
plenty of room inside to hide a Super Lizard Light or
an L.E.D. Accent Light.
Fits: Following Models without oil coolers - All ’97-’11
Electra Glides, ’98-’11 Road Glides, ’06-’11 Street
Glides, & ’97-’11 Road Kings
K1547 Regulator Cover (ea)
K9128 K9127
D. REAR MASTER
CYLINDER COVER FOR XL
U.S. Patent D409,119
K9127 Fits: ’84–’03 XL
Models (ea)
E. CLUTCH CABLE
ADJUSTER COVER
K2017
K2017 Fits: All ’87-’12 H-D Models
with stock cables & most
steel braided cables 0.355” in
diameter or less (ea)
K2023 Replacement Spring Clips (pr)
W W W . Z O D I A C . N L

K7778
ENGINE GUARD
MOUNT TAB COVER
Every detail counts, so cover up those rust prone
engine guard welds with some shiny chrome.
Lightweight chrome-plated ABS, these install in just
minutes. Combine with the Küryakyn lower frame
covers for an unbeatable look.
Fits: Stock Engine Guards on all ’97-’12 Electra Glides,
Road Glides, Street Glides, Road Kings, & Trikes
Note: Not Compatible with Küryakyn Ergo Guards or Rear Master
Cylinder Cover (P/N 8653).
K7778 Engine Guard Mount Tab Covers (pr)
FRONT MOTOR
MOUNT COVER
FOR DYNA
U.S. Patent D416,227
Here’s a beautiful cover for
an ugly motor mount. Easy
2-bolt installation means
you’ll be stylin’ in no time.
Fits: ’91-’05 Dyna Models
K1545 Motor Mount
Cover (ea)
K1545
K7839
K7784
OIL COOLER COVER
FOR ’11-'12 TOURING MODELS
Patent Pending
K7778
Made from light weight ABS, this installs just like the
factory cover & offers more chrome treatment to
help hide those unsightly oil lines.
Fits: Stock oil cooler on '11-'12 Electra Glides, Road
Glides, Street Glides, Road Kings, & Trikes
K7784 Oil Cooler Cover (ea)
REGULATOR COVER
FOR SOFTAIL
A stock voltage regulator normally
fades into the background, but with
this sharp Voltage Regulator Cover
it will be right in the spotlight! Deep
fins & beautiful chrome, it really
stands out! Besides looking great,
the smooth finish is much easier to
keep clean & liberal venting lets it
keep its cool. Installation? Simple –
two bolts & you’re stylin’!
K7839 Fits: All ’01-’12
Softail Models (ea)
K7784
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 147
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

ENGINE
A B
C
A
C. BREATHER BOLT COVERS
FOR TWIN CAM
C
A. THROTTLE
SERVO MOTOR COVER
Great looking remedy to cover that ugly throttle
servo motor when using a Screamin’ Eagle
Stage One, Heavy Breather or any Küryakyn
Air Cleaner.
Fits: ’08-’12 Electra Glides, Road Glides, Street
Glides, Road Kings, & Trikes
K8657 For use with Screamin’
Eagle Stage One or Heavy
Breather Air Cleaner (ea)
K8659 For use with all Küryakyn
Air Cleaners (ea)
B. THROTTLE BODY SUPPORT BRACKET COVER
Designed to complement our Servo Motor Covers (P/N K8657 & K8659). This part removes the ugly from the stock
support bracket!
Fits: ’08-’12 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes with Küryakyn Air Cleaners
K8658 Throttle Body Support Bracket Cover (ea)
Cover those unsightly zinc-plated Twin Cam breather bolts! Simply press-on & tighten the set screw.
Fits: All ’99-’12 Twin Cams with Küryakyn Air Cleaners & Crankcase Breather Kits & ’07-’12 Sportsters with
Küryakyn Air Cleaners
K7791 Breather Bolt Covers for Twin Cam (pr)
148
Rendering
Shown
B
THROTTLE
BODY COVER
Designed to dress up one of the most noticeable areas on the Twin Cam
motor, this throttle body cover mounts behind the air cleaner for a clean &
simple chrome look. Available for most air cleaners including all Küryakyn
air cleaner styles.
K7246 Fits with Küryakyn Hypercharger, Pro-Series Hypercharger, or
Pro-R Hypercharger on ’01-’12 EFI Softail Models, ’02-’07 EFI
Touring Models, or ’04-’12 EFI Dyna Models (ea)
K7247 Fits with All Küryakyn Air Cleaners (except Hyperchargers &
Twin Velocity/Plus), Ness Big Sucker I & II, & Screamin’ Eagle
Stage 1 & Heavy Breather on ’01-’12 EFI Softail Models, ’02-’07
EFI Touring Models, or ’04-’12 EFI Dyna Models (ea)
W W W . Z O D I A C . N L

K8123
K8124
TAPPET BLOCK COVERS
K7782
Transform your stock cast aluminum or wrinkle black finish to
glistening chrome.
K8124 Fits: ’91-’03 Sportsters (pr)
K8123 Fits: ’84-’99 EVO Big Twins (requires minor
modifications to stock airbox) (set)
Note: FLT Models require the use of P/N 1600.
K8389
B
C
K8389
TAPPET BLOCK ACCENTS
So clean & so simple! Nothing could be easier than to
add this cover to your exposed engine case. Its chrome
style accents the stock tappet blocks & makes a huge
difference.
K8389 Fits: All ’99-’12 Twin Cam Engines (ea)
U.S. Patent D588,049
K7782 Fits: ’06-’12 Sportsters (ea)
Patent Pending
Note: Not compatible with Küryakyn Tappet Block Covers (P/N K8230).
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 149
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

TRANSMISSION SHROUDS
TRANSFORM T RANS F O R M THE RIGHT RIG HT SIDE S IDE OF YOUR AWESOME A W ESOM E TWIN TW IN CAM C A M ENGINE ENG INE WITH W ITH THESE EASY EAS Y TO T O INSTALL, INS TALL , LUXURIOUS
L U X U RIOUS
COVERS. COV ERS . AVAILABLE A V A ILA BLE FOR BIKES B IKES EQUIPPED E Q U IPPED WITH WI T H STOCK HEADPIPES OR AFTERMARKET A FTERMA RKET TRUE DUAL DU A L PIPES. P IPES .
A
K7878
A. FOR SOFTAIL
K7878 Fits: All ’07-’12 Softail Models (ea
U.S. Patent D587,632
K8198 Fits: ’91-’99 Softail (ea)
K8205 Fits: ’00-’06 Softail (Does not fit
Models with hydraulic clutch) (ea)
B. FOR DYNA
K8208 Fits: All ’99-’05 Dyna Models (ea)
K7837 Fits: All ’06-’12 Dyna Models (except '12 FLD)
with stock exhaust support bracket (ea)
K7838 Fits: All ’06-’12 Dyna Models (except '12 FLD)
with Aftermarket Exhaust (ea)
K7878
K7203
K8395
K8389
B
DELUXE OIL LINE NACELLE
FOR SOFTAIL
Blanket the area between the cam cover
& transmission. This piece surrounds
the oil lines & covers the exposed clutch
cable where it enters the transmission
end cover. Installs easily & is the perfect
complement to our Transmission Shroud &
Tappet Block Accent.
K8395 Fits: All ’07-’12 Softail Models (ea)
K8204 Fits: All ’00-’06 Softail Models (ea)
K8205
K7878
K8208
K7837
K8204
W W W . Z O D I A C . N L

TRANSMISSION SHROUDS
C. FOR TOURING MODELS EQUIPPED WITH STOCK HEAD PIPES
K7876 Fits: ’07-’08 Electra Glides, Road Glides,
Street Glides, & Road Kings (set)
K8654 Fits: ’09-’12 Electra Glides, Road Glides,
Street Glides, Road Kings, & Trikes (ea)
Note: P/N K8654 will also fit ’09-’12 Touring Models with Küryakyn or V&H True Dual Head Pipes
where the rear head pipe is routed in the same manner as the stock rear head pipe.
FOR TOURING MODELS EQUIPPED WITH TRUE DUAL HEAD PIPES
K7877 Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings (set)
Note: P/N K7877 will fit ’09-’12 Touring Models if equipped with aftermarket True Dual Head Pipes
where the rear head pipe exits over the top of the transmission to the left side of the bike.
K8209 Fits: ’99-’01 Road Kings & ’00-’01 Electra Glides (ea)
(Not Shown – Appearance similar to P/N K8208 - pg 150)
K8201 Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road
Kings (ea)
OIL LINE COVER
FOR SOFTAIL
Give your Softail’s engine
more shine! Though similar
to our previous oil line cover,
this particular cover works
with the Transmission Shroud
(P/N K7878) & is easy to install with
a single polished, stainless band
clamp.
Fits: All ’00-’12 Softails (except
Rocker/C)
K7203 Oil Line Cover (ea)
C
K8654
K7877
K8264
OIL FILLER
SPOUT COVER
K8201
This really cleans up that dull, drab
area around your oil filler neck.
Chrome-plated die-cast construction
with easy installation.
K8264 Fits: ’93-’06 Electra Glides,
Road Glides, Street
Glides, Tour Glides & Road
Kings (except Screamin’
Eagle Models with 103”
engine)
Note: Compatible with H-D Engine-Transmission
Interface covers (H-D P/N’s 66503-00, 66503-02,
66096-02).
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 151
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

EASY TURN RN
DIPSTICK CAP
Improve the looks & function of your stock oil dipstick!
Utilizing the stock internals of the stock dipstick,
this easy turn cap replaces the top portion to make
checking oil levels quick & simple.
Fits: ’07-12 Electra Glides, Road Glides, Street Glides
& Road Kings, ’09-’12 Trikes, ’06-’12 Dyna Models,
’08-’11 Rocker/C
K1007 Easy Turn Dipstick Cap (ea)
7779
K8274
152
Rendering
Shown
K8656
K8394
K8694
K1052
7847 7747
K1008
ZOMBIE
OIL FILLER CAP
U.S. Patent D545,746
Fits: ’93-’06 Electra Glides, Road
Glides, Street Glides, Tour Glides,
Road Kings & ’99-’05 Dynas
K1052 Zombie Oil
Filler Cap (ea)
PEAKED
DIPSTICK ACCENT
Compatible with our
transmission shrouds.
Fits: ’07-’11 Electra Glides, Road Glides,
Street Glides, Road Kings; ’09-’11
Trikes, ’06-’11 Dyna Models; & ’08-’11
Rocker/C
K1008 Peaked Dipstick
Accent (ea)
K8694
COMBINE WITH OUR
TRANSMISSION SHROUDS
FOR THE ULTIMATE
CHROME ENGINE!
PG 150-151
REAR CYLINDER BASE COVERS
One of our most popular dress-up items for Touring bikes! Clean up the black
hole behind the rear cylinder. Add our Transmission Shroud & the sparkle will be
captivating!
K8394 Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings with
Küryakyn Transmission Shroud (P/N’s K7876 or K7877)
Note: Requires Küryakyn Transmission Shroud for installation. If a ’09-’12 Touring
Model is equipped with aftermarket exhaust that allows installation of P/N K7877,
this cover may also be installed.
K8694 Fits: ’09-’12 Electra Glides, Road Glides, Street Glides, Road Kings, &
Trikes
Note: This cover can be used by itself or with our Transmission Shroud (P/N K8654)
on ’09 -’12 Models. On ’09-’12 Models equipped with an aftermarket true dual
exhaust system where the rear head pipe exits over the top of the transmission to the
left side of the bike, use the combination of Küryakyn Transmission Shrouds (P/N
K7877) & Rear Cylinder Base Cover (P/N 8394).
K8274 Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings (pr)
Note: Can be used with other H-D covers with minor modifications.
K8147 Fits: All ’93-’95 FLT Models (ea)
K8656 Fits: All ’07-’12 Softail Models (except Rocker/C or FLSTSC with stock
head pipes) (set)
W W W . Z O D I A C . N L

K7847
STARTER COVER
This one simple cover turns the hodge-podge of the starter solenoid & all of its related wiring into one sculpted,
glistening unit. It’s designed to work with the stock starter end cover & complement our Transmission Shroud &
Cylinder Base Cover.
FOR TOURING - SCREAMIN’ EAGLE
FOR TOURING - STANDARD
K7847 Fits: ’07-’12 Electra Glides (except ’07-’12 FLHTCUSE),
’07-’12 Road Glides (except ’09 FLTRSE; ’11 FLTRUSE, '12
FLTRXSE), ’07-’12 Street Glides (except ’10-’12 FLHXSE)
& ’07-’12 Road Kings (except ’07-’08 FLHRSE) & ’09-’12
Trikes (ea) U.S. Patent D596,537
K7846 Fits: ’99-’06 Electra Glides (except ’04-’05 FLHTCSE &
’06 FLHTCUSE), ’99-’06 Road Glides, ’06 Street Glides,
& ’99-’06 Road Kings (except ’03 FLHRSE) (ea)
U.S. Patent D595,191
K7847
STARTER
MOUNT COVER
FOR ’09-’12 TOURING
When combined with our Starter
Cover (P/N’s K7847 or K8638), our new
die-cast, chrome-plated Starter Mount Cover completely
dresses up the exposed starter on ’09-’11 Touring Models.
K7779 Fits: ’09-’12 Electra Glides, Road Glides,
Street Glides, Road Kings, & Trikes (ea)
AFTER BEFORE
K8638
K7783
Notes: Compatible with One-Piece Inner Primary Cover (P/N K7780).
NOT compatible with Two-Piece Inner Primary Cover (P/N K8397). Will also
fit ’07-’08 Models if equipped with a 2-1 or staggered dual exhaust. However, it
will only work with our One-Piece Inner Primary Cover (P/N K7780); it will
not work with our Two-Piece Inner Primary Cover (P/N K8397).
K8638 Fits: ’07-’12 FLHTCUSE, ’07-’08 FLHRSE,
’09 FLTRSE, ’10-’12 FLHXSE; ’11 FLTRUSE,
'12 FLTRXSE (ea)
U.S. Patent D610,050
K8639 Fits: ’03 FLHRSE, ’04-’05 FLHTCSE, ’06
FLHTCUSE (ea)
U.S. Patent D595,191
FOR SPORTSTER Patent Pending
K7747 Fits: ’10-’12 Sportsters
K7783 Fits: ’04-’09 Sportsters
K7779
K7747
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 153
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

INNER PRIMARY COVERS
K7781
K8294
K7781
K8398
INNER PRIMARY
COVER EXTENSION
If you’re using a 2-1 or staggered performance exhaust
with our 8294 Inner Primary Cover, this extension
covers the area where the crossover pipe had been.
K8295 Inner Primary Cover
Extension (For use with
P/N K8294 Only) (ea)
INNER PRIMARY
R COVERS
Transform your ride from dull to daring in minutes. Combine with our Cylinder Base
Covers for the ultimate custom look.
FOR TOURING MODELS U.S. Patent D581,322
K7780 One-Piece Inner Primary Cover (ea)
Fits: ’09-’12 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes
Note: Will also fit ’07-’08 Touring Models if stock exhaust has been removed & replaced
by a 2-1 or staggered dual system. ’07-’08 Models with stock head pipes or true duals
require P/N 8397.
K8397 Two-Piece Inner Primary Cover (ea)
Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings
Note: Will fit ’09-’12 Touring Models but One-Piece Cover (P/N 7780) looks much
better.
K8294 Fits: ’90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road
Kings Patent Does Not Apply
FOR SOFTAIL U.S. Patent D581,322
K8398 Fits: ’07-’12 Softails (except Rocker/C) (ea)
Note: Rear section cannot be installed in FLSTSC.
K8299 Fits: ’89-’99 Softail Models (except ’97-’99 FLSTS) (ea)
K8291 Fits: ’00-’06 Softail Models (works with lowered bikes) (ea)
Patent Does Not Apply
FOR DYNA U.S. Patent D581,322
K8399 Fits: '12 FLD Switchback, ’06-’12 FXDWG, ’08-’12 FXDF with forward controls (ea)
Note: Can also be used on any ’06-’12 Dyna converted to forward controls.
K8377 Fits: All ’06-’12 Dyna with Mid Controls (ea)
FOR SPORTSTER Patent Pending
K7781 Fits: ’04-’12 Sportsters (kit)
P/N 7781 INCLUDES
CYLINDER BASE
COVER!
K8295
K8370
K8397
INNER PRIMARY COVER FRONT
EXTENSION
This cover picks up right where our 8294 Inner
Primary Cover left off to cover the shift pivot
area & grease fitting.
K8370 Fits: ’90-’06 Electra Glides,
Road Glides, Street Glides,
Tour Glides & Road Kings
W W W . Z O D I A C . N L

K8392
K7780
YLINDER BASE COVERS
K8141
K8143
K8392
K8393
CYLINDER BASE COVERS
Beautifully highlight the transition from cylinder to engine case. The perfect complement to
Küryakyn Inner Primary Covers. (Sold separately)
K8392 Fits: ’07-’12 Electra Glides, Road Glides, Street Glides, Road Kings, Trikes
& ’06-’12 Dyna Models
K8393 Fits: All ’07-’12 Softail Models (ea)
K8143 Fits: ’00-’06 Softails, ’99-’06 Electra Glides, Road Glides, Street Glides,
Road Kings, ’99-’05 FXDWG & any ’99-’05 Dyna Models converted to
forward controls
Important: Do not install this cover on modified engines with 4” or larger bores.
K8140 Fits: ’84-’99 H-D Evo Big Twins with forward controls or floorboards (ea)
K8254 Fits: S&S Super Stock 88”, 96”, 98”, 103” Evolution Style Motor (ea)
K8141 Fits: All ’91-’03 Sportsters (ea)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 155
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

HORN COVERS
K8128
K7718
K7714
K7740
V-SHIELD
HORN COVER
The V-Shield Horn Cover will fit all ’92-’12 H-D Big Twins (carbureted &
injected), as long as the stock horn is located between the cylinders.
K8128 Chrome V-Shield Horn Cover (ea)
7204 Gloss Black V-Shield Horn Cover (ea)
SKULL
HORN COVER
The stock cowbell horn cover is a great look for ol’ Bessie,
but not on your bike! It lacks attitude. Here’s a better
idea...the Skull Horn Cover. Stick this wicked ABS cover
onto your stock cowbell & turn bovine to bad in an instant!
Fits: ’92-’12 H-D Models with stock cowbell horn cover
K7718 Chrome Skull Horn Cover (ea)
K7741 Painted Black Chrome Skull Horn Cover (ea)
FLAME
HORN COVER
Despite its incendiary appearance, this h hhot llooking k horn cover poses no
additional risk of burn or heat damage to skin, pant legs or polishing cloths over
the stock cowbell it mounts to. However, viewing through sunglasses may provide
some protection from its raging sparkle!
Fits: ’92-’12 H-D Models with stock cowbell horn cover
7714 Flame Horn Cover (ea)
FITS BIKES WITH & WITHOUT DETACHABLES
HIDDEN HORNS
FOR TOURING MODELS
K7204
Want to make sure you’re heard? Then these 115decibel
horns will turn some heads! These trumpet horns
won’t clutter up the side of that awesome V-Twin motor.
The unique mounting position behind the saddlebag creates
an enhanced blast when you sound the horn & removes the problem
of bugs, water, & debris that plague other horns. This chrome-plated set includes a
plug-&-play wiring harness that allows you to keep your stock horn if desired.
Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings
K7740 Hidden Horns for Touring Models (set)
K7741
W W W . Z O D I A C . N L

COVER ONLY - Give your existing Wolo Bad Boy Air Horn a little
Küryakyn shine! Peel-&-stick installation for a quick streamlined look.
Fits: Wolo Bad Boy Air Horn Models 419 & 519 & Küryakyn P/N 7742
K7732 Cover for Wolo Bad Boy Horn (ea)
FLAME HORN COVER
WITH WOLO® HORNS
Obtain some peace-of-mind for a practical price! With
its loud yet appealing tone you’ll feel safer on the road
& combined with the blazing chrome flames – you’ll
look impressive too! Rated at 115 decibels, the kit is
equipped with a pair of Wolo 225-2T High-Low Tone
electric horns (510/420 Hz). Includes mounting bracket,
Horns, wiring harness & Küryakyn Flame Horn Cover.
Bolts on in place of your stock cowbell & wiring is
plug-&-play to ensure a low stress install.
Fits: ’92-’12 H-D Models with Stock Cowbell Horn
K7298 Flame Horn Cover (kit)
KÜRYAKYN’S
SUPER DELUXE WOLO®
BAD BOY AIR HORN KIT
Our Super Deluxe Kit is equipped with the same
amazing Air Horn as our Deluxe Kit (P/N K7742)
but now a sleek chrome cover completes the
package! The 118 decibel - 530/680Hz dual-tone
air horn is two times louder than your factory horn.
Includes convenient bracket & plug-&-play wiring
for a hassle-free install.
Fits: ’92-’12 H-D Models with Cowbell Horn
K7743 Wolo Bad Boy Horn Kit (kit)
KÜRYAKYN’S
DELUXE WOLO®
BAD BOY AIR HORN KIT
K7732
K7742
Küryakyn has teamed up with Wolo to bring you the best &
easiest to install air horn on the market. The latest in air horn
technology, Wolo’s Bad Boy Air Horn produces a powerful
dual-tone air horn sound that is two times louder than the
factory horn. The one-piece design requires no hoses & the
heavy-duty, maintenance free compressor will provide years
of dependable service.
Küryakyn designed a sturdy bracket & plug-&-play wiring
harness so you can mount the Bad Boy in place of the stock
H-D horn without any fabrication & plug it in without having
to piece together your own wiring to install the relay.
Fits: ’92-’12 H-D Models with stock cowbell horn
K7742 Küryakyn’s Deluxe Wolo®
Bad Boy Air Horn Kit (ea)
K7298
A KÜRYAKYN EXCLUSIVE!
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 157
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

A.STARTER CONNECTOR
PLUG COVER
K1315 Fits: ’96-’06 Evo Big Twin &
Twin Cam Starters (ea)
Note: Intended for Touring & Dyna Models. This
connector is covered by oil tank on Softail Models.
B.FROG MOUTH
NEUTRAL SWITCH COVER
K2025 Fits: ’98-’05 Dyna; ’98-’12 Electra
Glides, Road Glides, Street Glides,
Road Kings, & Trikes (ea)
C.CHROME SOLENOID COVER
K9050 Fits: ’90-’06 Big Twin Starters,
’91-’12 XL1200, & ’95-’12 XL883
(not for use w/ full coverage
starter end covers (ea)
Renderings
Shown
SPARK PLUG/
HEAD BOLT COVERS
Take your motor to the next level with the hottest head bolt covers around. Featuring a
stepped & slotted design with faceted edges to catch & reflect light for an incredible
shine. Installation takes just minutes using four set screws per cover for a secure fit.
Fits: ’99-’12 Electra Glides, Road Glides, Street Glides, Road Kings & ’09-’12 Trikes
K7254 Chrome - Stepped Spark Plug–Head Bolt Covers (pr)
K7257 Wrinkle Black - Stepped Spark Plug–Head Bolt Covers (pr)
158
K1315
A
K9050
C
K2025
B
D
G
D.OIL PRESSURE
SENDER COVER
K1600 Fits: ’87-’98 FLTC &
FLHTC Models w/large
2-terminal sending units
E.VELLO COIL COVER
K2033 Fits: ’91-’95 Dyna (ea)
F. INSTY-CHECK DIPSTICKS
Check your oil in seconds!
K1013 ’87-’06 5-Speed Big
Twin, Chrome (ea)
K1012 ’80-’86 5-Speed Big
Twin, Chrome (ea)
K1010 ’80-’86 5-Speed Big
Twin, Red (ea)
K1014 ’80-’86 5-Speed Big
Twin, Blue (ea)
F
G.CLUTCH CABLE
FERRULE ACCENT
Eliminates the unfinished transition
between the clutch cable & the
transmission or primary cover.
K2024 Fits: Clutch Cables on
’87-’99 Big Twin &
’91-’06 Sportsters (ea)
Note: Does not work with Küryakyn Transmission
Shrouds (P/N K8198, K8208, K8209).
H.CHROME OIL
SENDER SWITCH COVER
K8323
H
E
K8136 Fits: All ’84-’99 Evo Big
Twins except Models
equipped with large
2-terminal sending units
I.PETCOCK COVER
I
Fits: ‘81-’01 stock H-D petcocks
K2011 Chrome Petcock Cover (ea)
W W W . Z O D I A C . N L
K8315
SCORPION SPARK
PLUG-HEAD BOLT COVERS
FOR TWIN CAM
K8323 Fits: All ’99-’12 Twin Cams (pr)
K8369 Fits: S&S Super Stock 96” (pr)
FOR EVOLUTION
K8315 Fits: H-D Evo Big Twins & ’86
-’03 XL (Does not fit Screamin’
Eagle Evo Heads) (pr)

KOOL KAPS CHROME COVERS
Cover those unsightly & unfinished bolt heads with brilliant chrome. (10/pk)
K2440 For 3/16” Allen Bolts
K2441 For 1/4” Allen Bolts
K2442 For 7/16” Hex Bolts
K2443 For 1/4” Allen Bolts
K2444 For 1/4” Torx Bolts
K2445 For 5/16” Allen Bolts
K2446 For 1/2” Hex Bolts*
K2447 For 3/4” Hex Bolts*
K2448 For 5/8” Hex Bolts
K2449 For 9/16” Hex
Deep/30t Torx*
* Requires a small amount of silicone.
Found at local hardware store or order
Küryakyn P/N K400039 for $8.99.
J. HOT SPOTS
CUSTOM END PLUGS
FOR ALLEN HEAD BOLTS
CHROME
K8114 Fits: 1/4” Allen Bolts (10 pk)
K8117 Fits: 5/16” Allen Bolts (7 pk)
K8120 Fits: 3/8” Allen Bolts (6 pk)
BLACK
K8113 Fits: 3/8” Allen Bolts (6 pk)
TURQUOISE
K8098 Fits: 5/16” Allen Bolts (7 pk)
K8099 Fits: 3/8” Allen Bolts (6 pk)
AQUA PEARL
K8094 Fits: 1/4” Allen Bolts (10 pk)
K8095 Fits: 5/16” Allen Bolts (7 pk)
K8096 Fits: 3/8” Allen Bolts (6 pk)
K7771
FINISH OFF
YOUR ENGINE!
K2450 NEW KIT - This set has all the
Kool Kap bolt covers to do your
Twin Cam or EVO Engine, Cam
Cover Transmission & Primary
Cover
K2451 For 3/4” hex head bolt used in
Küryakyn Highway Pegs* (pr)
K
K
J
K2447
K8107
K8106
K8781
K2445
K. HOLLOW POINT
SLEEVE & HOT SPOT KIT
Give your motor the ultimate
finishing touch! Works great on all
motor bolts using a ¼” Socket Head
Cap Screw. Available in packs of
ten - two packs will cover both sides
of your motor.
K7771 Hollow Point Sleeve
& Hot Spot Kit (10 pk)
L. HOT SLEEVES
Cover the heads of 1/4” Allen
bolts found on your Evolution or
Twin Cam engine. Top off with
our Hot Spots & you’ll be lookin’
good.
K8781 Hot Sleeves (10 pk)
K2448
K2442
K2443
WORK GREAT ON OUR
HIGHWAY PEGS!
K8144
K2441
K2449
K8372/
K8693
M. ROCKER BOX BOLT
COVERS
K8144
The final touch that makes the difference.
Simple push-on installation.
Fits: All ’99-’12 Twin Cam Engines
K8372 Peaked (set/4)
K8693 Peaked (set/6)
K8144 Stiletto (set/4)
Note: Cover extends 5/8” above top surface of the
rocker box bolt. Be sure there is adequate clearance
above the bolts you intend to cover.
N. HEAD BOLT COVERS
Headbolt Covers hide the whole bolt head.
K8106 Low Profile (set/4)
Fits: All ’87-’12 H-D Models
K8107 Stiletto (set/4)
Fits: All ’87-’12 H-D Models
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 159
K2446 BIKE MAPS
K2440
K2444
N M
N
L
H
M
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

REAR END
TAKE ALL THE GUESS WORK OUT OF CHROMING YOUR SWINGARM WITH THESE GREAT LOOKING, SIMPLE TO
INSTALL COVERS. AVAILABLE AS A COMPLETE SET TO COVER THE ENTIRE SWINGARM & REAR AXLE ASSEMBLY
OR SIMPLY CHOOSE THE COMPONENTS YOU NEED TO CREATE A ONE OF A KIND LOOK. INSTALL JUST THE
PHANTOM COVERS TO CHROME THE AXLE AREA, AVAILABLE IN BOTH LIGHTED & UNLIGHTED VERSIONS. THE
LIGHTED VERSION FEATURES A BAND OF REAR FACING, SUPER BRIGHT RED L.E.D.’S. IN EACH COVER. THE L.E.D.’S
ARE SINGLE FUNCTION & CAN BE WIRED AS AUXILIARY RUNNING LIGHTS, TURN SIGNALS, OR BRAKE LIGHTS.
(FOR INCREASED REAR VISIBILITY, ADD OUR REAR RUN-TURN-BRAKE CONTROLLER [P/N 4859] TO MAKE YOUR
TAILLIGHT, EXISTING TURN SIGNALS, & THE LIGHTED PHANTOM COVERS MULTI-FUNCTIONAL). FOR THOSE THAT
ALREADY HAVE THE PHANTOM COVERS INSTALLED, THE TUBE COVERS ARE ALSO AVAILABLE TO FINISH THE LOOK
& COMPLETELY CHROME YOUR SWINGARM.
7773
K7851
BOOMERANG COVERS
FOR ’08-’12 SOFTAIL MODELS
K7773 Fits: ’08-’12 FLSTC, ’08 FXST, ’08-’09
FXSTB, ’08-’10 FXSTC, ’10-’12 FLSTSE
Patent Pending
Note: Will fit ’08-’12 FLSTF, FLSTFB,
FLSTN, FLSTSB if the stock exhaust has
been removed & replaced by a staggered dual
or 2-1 system.
FOR ’00-’07 SOFTAIL MODELS
K7851 Fits: All ’00-’07 FXST (except Deuce) & all
’00-’07 FLST (except Fat Boy & Deluxe) (pr)
K8235 Fits: ’00-’07 Deuce with exhaust system not
using O.E. rear support bracket (pr)
Note: If you have a ’00-’07 Fat Boy or ’05-’07 Deluxe & have removed the
O.E. rear exhaust support bracket, you should use P/N K7851.
FOR ’86-’99 SOFTAIL MODELS
K8188 Fits: All FXST Models & all FLST Models
without Shotgun Exhaust (pr)
K7258
SWINGARM PIVOT COVERS
K7849 Fits: All ’00-’07 Softail
Models (except ’05-’07
FLSTN, ’07 FLSTF, & ’07
FXSTD) (pr)
K7258 Fits: All ’08-’12 Softail
Models (pr)
W W W . Z O D I A C . N L
K7849

SWINGARM SW
COVER SETS
FOR ’ 08- 0 ’ 12 SOFTAIL
COMPLETE WITH UNLIGHTED PHANTOM COVERS
K7815 Fits: All ’08-’12 Softails (except
FLSTF, FLSTFB, FLSTN, FLSTSB,
FXCW/C, FXS) (set)
Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if
stock exhaust has been removed & replaced with a staggered dual
or 2-1 system.
COMPLETE WITH LIGHTED PHANTOM COVERS
K7814 Fits: All ’08-’12 Softails (except
FLSTF, FLSTFB, FLSTN, FLSTSB,
FXCW/C, FXS) (set)
Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if
stock exhaust has been removed & replaced with a staggered dual
or 2-1 system.
TUBE COVERS ONLY
K7818 Fits: All ’08-’12 Softails (except
FXCW/C) (set)
K8202
PHANTOM COVERS
FOR ’ 08- ’ 12 SOFTAIL
K7818
K8220
Fits: All ’08-’12 Softails (except FLSTF, FLSTFB, FLSTN,
FLSTSB, FXCW/C)
K7816 Lighted Phantom Covers (pr)
K7817 Unlighted Phantom Covers (pr)
Note: Will fit Fat Boys, Deluxe, Cross Bones, & Blackline if stock exhaust
has been removed & replaced with a staggered dual or 2-1 system.
FOR ’ 86- ’ 07 SOFTAIL
COMPLETE WITH UNLIGHTED PHANTOM COVERS
K8256 Fits: ’00-’07 Softails* (except ’00-’07 Deuce,
’07 FLSTF, ’06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)
K8284 Fits: ’00-’07 Deuce* (set)
K8288 Fits: ’86-’99 Softail Models** (set)
*P/N K8256 will fit ’00-’06 FLSTF or ’05-’07 Deluxe & P/N K8284 will fit ’00-’07
Deuce ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.
** Does not fit ’86 & ’87 Softails with rear-facing axle adjusters.
COMPLETE WITH LIGHTED PHANTOM COVERS
K8102 Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ’07 FLSTF,
’06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)
K8698 Fits: ’06-’07 FXST, FXSTB, FXSTC, FXSTS, ’07 FLSTF (set)
K8221 Fits: ’00-’07 Deuce* (set)
K8222 Fits: ’86-’99 Softail Models** (set)
*P/N K8102 will fit ’00-’06 FLSTF or ’05-’07 Deluxe, P/N K8221 will fit ’00-’07
Deuce & P/N K8698 will fit ’07 FLSTF ONLY if stock exhaust has been replaced with a
staggered dual or 2-1 system.
** Does not fit ’86 & ’87 Softails with rear-facing axle adjusters.
TUBE COVERS ONLY
K8108 Fits: ’00-’07 Softails (except ’00-’07 Deuce) (set)
K8228 Fits: ’86-’99 Softails (set)
K8108
FOR ’ 86- ’ 07 SOFTAIL
K8102
K7816
Fits: All ’86-’07 Softails Models (except ’00-’07 FLSTF, FXSTD,
’05-’07 FLSTN, ’06-’07 FXST, FXSTB, FXSTC, FXSTS)
K8200 Phantom Covers, Chrome (pr)
K8202 Phantom Covers, Gloss Black (pr)
K8220 Lighted Phantom Covers (pr)
Note: Lighted Phantom Covers are not D.O.T. approved nor are they intended to
replace stock turn signals or taillights.
Note: Will fit ’00-’06 FLSTF, ’00-’07 FXSTD, or ’05-’07 FLSTN if stock
exhaust has been removed & replaced by a staggered dual or 2-1 system.
Note: Does not fit ’86 & ’87 Softails with rear-facing axle adjusters.
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 161
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

MID-FRAME COVERS FOR TOURING MODELS
Create a smoother, creamier look by concealing unsightly frame welds
with this luscious, chrome-plated steel cover. Installs easily in just a matter
of minutes.
K8239 Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings
(pr) U.S. Patent D518,760
K7842 Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (pr)
K8609 Fits: ’09 -’12 Electra Glides, Road Glides, Street Glides, Road
Kings, & Trikes (set)
LOWER BELT
GUARD ACCENT
Without the hassle of removing the stock
guard, fully chrome your drive line for a
lasting impression!
162
K8609
K8239
K8609
K8677
K8677 Fits: All ’00-’12 Softail Models
(except Rocker/C) (ea)
K7857
K8239
LOWER FRAME COVER FOR SOFTAIL
Easy & neat, this cover installs right below our Boomerang Frame Cover on the left
side of your bike.
Fits: ’97-’07 Softail Models without cross-over exhaust
K8253 Lower Frame Cover for Softail (ea)
K8253
K7842
BEHIND THE ENGINE
FRAME COVER
This large show chromed cover fills that nasty black
hole behind your rear cylinder & starter while
perfectly hiding the gap between the y-frame
member. No drilling or modifications necessary y
for Cruise Control Equipped Models. If you have
L.E.D.’s lighting your engine, this helps reflect ct
light & makes that area sparkle!
Fits: ’97-’07 Electra Glides, Road Glides,
Street Glides & Road Kings
K7857 Behind the Engine
Frame Cover (ea)
SHOTGUN BELT GUARD
W W W . Z O D I A C . N L
10-5/8”
K7857
12-1/4”
K1542
Chrome-plated aluminum extrusions & castings with beechwood grips.
Fits: ’00-’11 FLSTC, ’06 FLST, ’00-’06 FLSTF, ’05-’11 FLSTN, ’00-’03 FLSTS, ’05-’07 FLSTSC,
’00-’05 FXST/B/S
K1542 Side-by-Side Shotgun Belt Guard (ea)

RIGHT REAR LOWER
FRAME COVER
FOR TOURING MODELS
U.S. Patent D594,791
By adding this classy stamped Lower
Frame Cover, you’ll create a pleasing
transition out of what was visual chaos.
This beautifully chromed embossed cover
creates a perfect bridge between the stock painted side cover
& the passenger floorboard area, eliminating exposed frame
tubes & the rear rubber isolation mount. A great addition to
Mid Frame Covers!
Fits: ’07-’08 Electra Glides, Road Glides, Street Glides &
Road Kings
K7829 Right Rear Lower Frame Cover (ea)
PASSENGER BOARD MOUNT ACCENTS
Dress up those stock black floorboard mounts with our simple ABS
chrome Passenger Board Mount Accents. No tools needed & no
drilling. Simply clean the surface, peel, stick & admire!
K7776 Fits: ’93-’09 Touring Models with stock Passenger
Floorboard Mounts (except ’04-’05 FLHTCSE &
’06-’09 FLHTCUSE) (pr)
K7777 Fits: ’10-’12 Touring Models with stock Passenger
Floorboard Mounts (except ’10-’12 FLHTCUSE & ’11
FLTRUSE) (pr)
K7858
K7776
K7777
INNER
FENDER ACCENT
FOR SOFTAIL
K7829
K7867
K7777
Affordable, easy, & wow what a difference! This creamy
chrome-plated stamped steel insert covers up your plain black
plastic inner fender/splash guard. Just stick it on with doublesided
tape & go!
K7858 Fits: All ’00-’06 Softail Models (except
’04 FXSTDSE or ’06 FXST, FXSTB, FXSTS,
FLSTFSE) (pr)
K7848 Fits: ’07 Deuce, Deluxe, Heritage & Springer
Classic (ea)
Note: This is one-piece for the right side of the bike.
K7867 Fits: All ’08-’12 Softail Models (except ’08-’11
Rocker/C) (pr)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 163
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

SADDLEBAG
LID ACCENTS
K1595
It’s all about lines; if you’ve got ’em, flaunt ’em! Besides their h i great t
looks, you’ll also be protected from minor nicks & scratches to these
areas. Peel-&-stick installation.
Fits: ’93-’12 Electra Glides, Road Glides, Street Glides, Tour Glides
& Road Kings with Hard Saddlebags
K7764 Slotted Saddlebag Lid Accents (pr)
K8646 Saddlebag Lid Accents (pr)
LID ACCENTS FOR SADDLEBAGS & TOUR-PAK ®
These chrome accents really highlight the tasteful look of the H-D
King, Chopped or Ultra Tour-Pak & saddlebag lids. Choose to
use just one set, or combine two sets for a truly pulled together
look that screams streamlined! Besides the visual appeal, they
also provide protection to the lids’ top edges that are very
susceptible to nicks & other damage.
Fits: Tour-Pak Lids on ’80-’12 Touring Models equipped with
King or Chopped Tour-Paks & Saddlebag Lids on ’93-’12
Electra Glides, Road Glides, Street Glides, Tour Glides, or Road
Kings with Hard Saddlebags
K8647 Lid Accents (pr)
K7764
K8647
K8646
K8645
SIDE COVER & SADDLEBAG ACCENTS
These streamlined chrome accents work with the contours of
the hard saddlebags & side covers to create a flowing, swept
body line. Intended for use without saddlebag rails, they’ll add
a classic, personal touch to your H-D Touring bike.
Fits: Electra Glides, Road Glides, Street Glides, Tour Glides &
Road Kings with Hard Saddlebags
K8645 Fits: ’93-’08 Models – Includes Saddlebag &
Side Cover Accents (6 pieces)
K7752 Fits: ’09-’12 Models – Includes Saddlebag
Accents Only (4 pieces)
SADDLEBAG LATCH COVERS
Saddlebag latches are conspicuous on touring rigs & are a great
place for a distinctive touch of style. Stock lock mechanisms are
re-used so you won’t end up with another set of keys!
Fits: ’93-’12 Electra Glides, Road Glides, Street Glides, Tour
Glides & Road Kings with Hard Saddlebags
K1595 Flamed (pr)
K1599 Grooved (pr)
K1599
W W W . Z O D I A C . N L
K1595

DESIGNED TO ACCEPT...
FRONT SPEAKER GRILLS
A great addition to an already
stunning part!
SEE PG 133
REAR
SPEAKER ACCENTS
Think of how wild visual effects add to a great music video
or concert. Now add the same excitement to your Ultra’s
sound stage! These bright chrome trim rings install easily on
top of the stock black rear speaker rings & come complete
with polished stainless hardware.
Fits: '98-'12 FLHTCU, '10-’12 FLHTK, ’11-'12 FLTRU, '08-'11
FLHTCUSE, & '09-'12 FLHTCUTG
K3792 Rear Speaker
Accents (pr)
Note: Will also fit ’98-’12 FLHTC if
equipped with Accessory Rear Speaker Kit.
K8648
HINGE COVERS
FOR H-D TOUR-PAK ® U.S. Patent D627,690
When perfection hinges on detail, these
little cover-ups really shine! Our beautifully
chromed aluminum hinge covers install
quickly & securely over the tired looking OEM
stainless pieces. You’ll be amazed at the life
these give to any paint job.
Fits: ’89-’12 Electra Glides, Tour Glides, Tri
Glides, or any Touring Model equipped
with a King, Ultra, or Chopped Tour-Pak
K8648 Hinge Covers (set)
SWINGARM ACCENTS
FOR TOURING
K7138
Because of its location, the plain black swingarm on a
Touring rig can easily fade into the background, but it can
take center stage when adorned with these sleek chrome
accents. Besides their flash & brilliance, the louvered
appearance & sweeping lines add new life & flair that’s sure
to impress! Installation requires no tools & just a few minutes
of your time.
Fits: ’09-’12 Electra Glides, Road Glides, Street Glides &
Road Kings
K8696 Swingarm Accents (pr)
Shown with Zombie
Medallion sold
separately - pg 133
K3792
K3792
K7138
LUGGAGE RACK RELOCATION KIT
Simple yet very effective. Relocate your stock or Küryakyn luggage rack with
these great looking risers. Your luggage rack will be raised ½” & can be
positioned ½” forward or ½” backward from its current location. Allows for
the use of Küryakyn L.E.D. Run-Turn-Brake Spoiler (P/N K7767) on ’10-’12
Electra Glide Ultra Limited Models when mounted in the forward position.
Fits: Any luggage rack with 1/2” diameter legs using 1/4”-20 mounting
screws - This includes Küryakyn Luggage Rack (P/N K7139) & stock rack on
’10-’12 Ultra Limited
K7138 Luggage Rack Relocation Kit (set)
K8696
K8696
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 165
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
EX
PERFORMAN
P
MISC
INDEX

L.E.D. REAR
BUMPER INSERT
Fusing auxiliary Run & Brake L.E.D. lighting with
elite styling, our new Rear Bumper Insert is the
true model of form & function. The chrome filler
panel is easy to install with plug-&-play wiring.
Fits: ’09-’12 FLHTC, FLHTCU, FLHR; ’10-’12 FLHTK, & ’09 FLHT
K7751 L.E.D. Rear Bumper Insert (ea)
K8621
REAR
FENDER ACCENTS FOR FLHX & FLTRX
It’s the unique & subtle touches that get noticed. That’s why we’re offering these
Rear Fender Accents! A simple way to get show quality chrome with class.
Made from a flexible yet durable ABS, they offer a great way to make your
bike as individual as you are.
Fits: ’06-’12 Street Glides & ’10-’12 Road Glide Customs
K7797 Rear Fender Accents (kit)
REAR FENDER
TIP LENS GRILL FOR ’09-’12 TOURING
Stock Fender Tip Lights are barely noticeable but this hot new Fender Tip
Lens Grill sets them ablaze. When illuminated, small holes in the cross
member & slots across the top emit a jewel-like light effect; a small detail
with a big impact! Installation takes only minutes & requires no tools.
Fits: ’09-’12 Electra Glides with Rear Fender Tip Lights
K8621 Rear Fender Tip Lens Grill (ea)
MUFFLER BRACKET COVERS
Designed to encapsulate & smooth the appearance of
the welded on muffler mounting brackets beneath the
saddlebags for a streamlined look. Made from chrome
plated stamped steel & will fit most 4” round mufflers.
K7255 Fits: 4” Round Mufflers on ’95-’12 Electra
Glides, Road Glides, Street Glides, Tour
Glides & Road Kings (pr)
W W W . Z O D I A C . N L

COVER THOSE UNSIGHTLY
GAPS IN MINUTES!
LOWER COVERS ONLY
Fill the void between your fender &
saddlebags! Attach to the fender with
pressure sensitive adhesive.
K1192 Chrome - Fits: ’95-’08
Electra Glides, Road Kings,
Road Glides with or without
H-D Detachable Docking
Hardware Kits (53803-06 &
53804-06) –Not compatible
with saddlebag rails (pr)
SADDLEBAG MOUNT
BRACKET ACCENTS
Bolt them on & dress it up! Cover up that
lower saddlebag support where it meets
the lower fender bracket - simple & easy.
Fits: ’96-’08 Electra Glides, Road Glides,
Tour Glides, & Road Kings
K1596 Zombie (pr)
K1597 Maltese Cross (pr)
K1598 Grooved (pr)
Note: Not compatible with H-D’s Nostalgic
Saddlebag Guard Rails.
K1192
K8640
K8640
EXHAUST TIPS FOR STOCK TOURING MUFFLERS
K7607
These clamp-on exhaust tips transform your ho-hum stock
mufflers in just minutes! While sound levels & performance
are unaffected, visual appeal is through the roof!
Fits: ’95-’12 Electra Glides, Tour Glides, & Road Kings, ’98-’12 Road
Glides (except ’10 FLTRX), & ’06-’12 Street Glides (except ’10 FLHX)
K7609
K7607 Six Gun Exhaust Tips (pr)
K7609 Fishtail Exhaust Tips (pr)
UPPER SADDLEBAG
FILLER PANELS
Küryakyn’s sleek Upper Saddlebag Filler Panels instantly
smooth & cover the upper shock mounts, air line, &
unsightly gap between the fender & saddlebag lids. Held
securely by 3M VHB adhesive tape, installation takes only
a few minutes. Select chrome or black from applications
for stock bikes or bikes equipped with H-D 2-Point or
Küryakyn P/N K1635 backrest attachment kit.
Fits: ’09-’12 Street Glide & ’10-’12 Road Glide Custom
K7207 Without Detachable Brackets -
Chrome (pr)
K7208 Without Detachable Brackets -
Gloss Black (pr)
K7221 With 2-Point Detachable
Brackets - Chrome (pr)
K7222 With 2-Point Detachable
Brackets - Gloss Black (pr)
K1596
K7207
Rendering Shown
K8641
REAR FENDER &
SADDLEBAG ACCENTS
Our classy fender tips are the perfect
chrome complement to clean fenders.
K8640 Rear Fender Accent
Fits: ’04-’08 Road Glides,
’04-’07 Road King
Customs, ’02-’03 FLHRSE,
’04-’05 FLHTCSE, ’06-’08
FLHTCUSE (ea)
K8641 Rear Saddlebag Accents
Fits: ’93-’12 Electra
Glides, Road Glides,
Street Glides, Tour
Glides & Road Kings with
hard saddlebags (pr)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 167
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

Renderings
Shown
Renderings Shown
B
A
F
A. TOP FENDER ACCENTS
FOR TRIKES
Enhance the look & add some character to the top side of your trikes
rear fenders with these unique & noticeable accents. Made from
lightweight, durable ABS & chrome plated for an unmistakable look.
Fits: ’09-’12 FLHTCUTG Tri Glide Ultra Classic & ’10-’11 FLHXXX Street
Glide Trike
K7216 Top Fender Accents (pr)
B. REAR FENDER ACCENTS
(LEADING EDGE) FOR TRIKES
ALL NEW SPECIFIC
PARTS MADE
EXCLUSIVELY FOR
HARLEY -DAVIDSON
TRIKES! ALL HIGH
QUALITY STYLISH &
INNOVATIVE PRODUCTS
TO MAKE YOUR TRIKE
AN AWE-INSPIRING
SHOW STOPPER.
Add some chrome & protect the edge of your Trike’s fenders with
these stylized accents. Mounting to the front leading edge of the
rear fenders, these chrome plated ABS accents are just what you
need to dress up a very noticeable area.
Fits: ’09-’12 FLHTCUTG Tri Glide UItra Classic & ’10-’11 FLHXXX Street
Glide Trikes
K7217 Rear Fender Accents - Leading Edge (pr)
W W W . Z O D I A C . N L

D
Renderings Shown
D. TRUNK
LATCH ACCENT FOR TRIKES
Designed with the rider in mind, this new accent
adds a burst of style & a bit of paint protection to
an otherwise plain area surrounding the trunk latch/
lock push-button. Made from lightweight yet durable
chrome plated ABS & install in just minutes.
Fits: ’09-’12 FLHTCUTG Tri Glide Ultra Classic & ’10-’11
FLHXXX Street Glide Trike
K7215 Trunk Latch Accent (ea)
F
C
Renderings Shown
FOR TRIKES!
E. MUD FLAPS
FOR TRIKES
C. REAR
LIGHT BARS FOR TRIKES
Küryakyn’s Rear Light Bars blend sculpted
chrome housings with auxiliary run, turn,
& brake lighting. Easy to install with
pre-applied 3M VHB adhesive tape &
plug-&-play wiring.
Fits: ’09-’12 FLHTCUTG Tri Glide Ultra
Classic & ’10-’11 FLHXXX Street Glide Trike
K7268 Rear Light Bars (pr)
Reduce road spray from the rear tires & add some
style to your trike with these great looking mud
flaps. Made from durable, yet flexible rubber
contrasting with chrome trim to match the lines of
the rear fenders. Secure, bolt on design installs
quick to get you on the road in no time.
Fits: ’09-’12 FLHTCUTG Tri Glide Ultra Classic &
’10-’11 FLHXXX Street Glide Trikes
K7220 Mud Flaps (pr)
F. REAR
FENDER FLARES FOR TRIKES
Much more than just chrome edging,
these two-piece fender flares add threedimensional
depth to an otherwise bland
wheel opening on stock H-D Trikes. With
unique lines & a brilliant chrome finish,
these rear fender flares are sure to
turn heads. Installation is quick & easy
using 3M VHB.
Fits: ’09-’12 FLHTCUTG Tri Glide
Ultra Classic & ‘10-’11 FLHXXX Street
Glide Trike
K7214 Rear Fender Flares (pr)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 169
E
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

ZOMBIE & WIDOW® TAILLIGHT COVERS
As your taillight fades into the darkness, the sinister impression of the
Zombie or Widow is all that will remain. A great addition to our popular
themed collections.
Fits: ’73-’12 H-D Models without bobbed rear fenders (except ’97-’03
FLSTS, ’05-’07 FLSTSC, ’05-’12 FLSTN, ’00-’07 FXSTD, ’02-’12 V-Rod,
’07-’12 XL1200N, ’09-’12 XL88N, '11-'12 XL1200C ’08-’11 Rocker, ’09 -’12
FXDB, ’10-’12 FXDWG, ’10-’12 FLHX, ’10-’12 FLTRX, ’09 FLTRSE, ’10-’12
FLSTSE, ’10-’12 FLHXSE, '12 FLTRXSE, & '12 FLD)
K9009 Chrome Zombie (ea) U.S. Patent D632,815
K9024 Gloss Black Zombie U.S. Patent D632,815
K9020 Widow (ea)
K8130
TAILLIGHT COVERS
Sturdy & attractive. These superbly stylized covers do wonders for your
dull taillight. 3-year limited warranty included, as these will never rust.
Fits: ’73-’12 H-D Models without bobbed rear fenders (except ’97-’03
FLSTS, ’05-’07 FLSTSC, ’05-’12 FLSTN, ’00-’07 FXSTD, ’02-’12 V-Rod, ’07-’12
XL1200N, ’09-’12 XL88N, '11-'12 XL1200C ’08-’11 Rocker, ’09 -’12 FXDB,
’10-’12 FXDWG, ’10-’12 FLHX, ’10-’12 FLTRX, ’09 FLTRSE, ’10-’12 FLSTSE,
’10-’12 FLHXSE, '12 FLTRXSE, & '12 FLD)
K8130 Taillight Cover (ea)
K9008 Taillight Visor without Slots (ea)
K9008
Note: P/N K9008 is intended for motorcycles with the license plate below the
taillight to cover the clear window on top of the lens.
CURVED LAYDOWN
LICENSE PLATE MOUNT FOR ROAD KING
As long as you have to display a license plate on your bike,
why not make it look like it belongs there? Curved to your
fender’s contour & laid down for a sleek low profile, this
chromed, ball milled mount will blend in, not stick out. Designed
to fit 4”x7” plates.
Fits: ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road
Glides & ’97-’08 FLHT Standard
K3165 Curved Laydown License Plate Mount (ea)
CURVED
LAYDOWN
LICENSE PLATE
MOUNT
FOR SOFTAIL WITH
TOMBSTONE TAILLIGHT
Flat is not where it’s at! Softail styling is rich with sensuous
curves & contours but the stock license plate mount is stark &
industrial looking. Our Curved Laydown License Plate Mount
has pleasing lines & a slightly swept mounting position that
blends in instead of sticking out. Silky smooth chrome finish &
detail grooves add a classy finishing touch. Fully compatible
with stock Softail Deluxe luggage racks.
Fits: ’05-’12 Softail Deluxe, ’05-’07 Softail Springer Classic,
’98-’03 Heritage Springer
K3181 Curved Laydown License Plate Mount (ea)
W W W . Z O D I A C . N L

CURVED LAYDOWN LICENSE PLATE MOUNT
WITH FRAME
This super cool, curved laydown license plate bracket is a major improvement over the
stock billboard plate mount on many H-D’s. The curved frame meets the backing plate cleanly for
a finished & completely custom look. Accents 4”x 7” plates.
Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
K9171 Chrome Curved Laydown License Plate Mount with Frame (ea)
K3148 Gloss Black Curved Laydown License Plate Mount with Frame (ea)
LIGHTED CURVED LAYDOWN
LICENSE PLATE MOUNT
Küryakyn’s Lighted Curved Laydown License Plate Mount is a great alternative to your
drab, stock license plate frame & mount. The ball-milled frame design is killer & the
license plate illumination meets DOT standards.
Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket
(Dyna, Sportster, Heritage, Fat Boy, etc.)
K3138 Lighted Curved Laydown
Plate Mount (ea)
LICENSE PLATES
K9171
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 171
K3148
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

K3163
K3157
K3149
L.E.D. LIGHTED
CURVED LICENSE PLATE FRAME
CURVED
LICENSE PLATE FRAME
The Street Glide is way cool, but this bolt on, gracefully
curved license plate frame makes a big difference. Rid
yourself of the stock black bracket & the flat look. No
drilling – no need for a new license plate light. Just
bolt it on & go!
CHROME
K3163 Fits: ’06-’09 FLHX Street Glides, ’09 FLTR
Road Glides, ’09 FLHT Electra Glide
Standards, ’09-’12 FLHR Road King,
’07-’08 FLHRSE, ’05 FLHTCSE, & '12 FLD
Dyna Switchback (ea)
K3157 Fits: ’10-’12 FLHX Street Glides & FLTRX
Road Glide Customs (ea) Patent Pending
GLOSS BLACK
K3149 Fits: ’06-’09 FLHX Street Glides, ’09 FLTR
Road Glides, ’09 FLHT Electra Glide
Standards, ’09-’12 FLHR Road King,
’07-’08 FLHRSE, ’05 FLHTCSE, & '12 FLD
Dyna Switchback (ea)
K3147 Fits: ’10-’12 FLHX Street Glides & FLTRX
Road Glide Customs (ea)
Here’s a great universal Curved License Plate Frame for custom or stock
fenders. It includes a chrome backing plate & outer frame with built-in L.E.D.’s
to illuminate the license plate. It’s a great way to relocate a license plate
below the taillight!
Fits: Universal applications with 4” x 7” license plates – Installation
requires drilling mounting holes
K9255 L.E.D. Lighted Curved License Plate Frame (ea)
TRANSFORM YOUR REAR END Choose your components from the steps below
LICENSE PLATE MOUNT
Rear Fender
TAILLIGHT - PGS 31-32 LICENSE PLATE MOUNT
HOLDER COVER - PG 176
Universal Turn Signals Tip Light
K9255 x
K2098 x
K3151 x
172
W W W . Z O D I A C . N L

CURVED
FENDER TIP LICENSE
PLATE MOUNT
You asked for it – we designed it! This very
classy curved license plate mount hugs
the contour of the fender & replaces the
existing fender tip. Incorporates a stylized
tip, red L.E.D. lights & a light to illuminate
the plate itself while cleaning up the clutter
on the rear fender. A simplified wiring
solution readily plugs in on ’96-’08 Touring
Models & ’96-’12 Softails. Hardwiring is
required on earlier Models.
Fits: Replaces Stock Fender Tip Light on
’80-’08 Electra Glides, Tour Glides &
Road Kings, ’98-’03 Road Glides, & ’86-’12
FLST Models
K3151 Curved Fender Tip License
Plate Mount (ea)
CURVED LICENSE PLATE
FOR CVO ROAD GLIDES & STREET GLIDES
We’ve come up with two bolt-on, plug-&-play solutions to rid your CVO
fender of the black plastic stock license plate mount! Purchase our Chrome
Mounting Backplate (P/N 3146) & then add your choice of the clean-&simple
Curved L.E.D. Lighted Frame (P/N 3144) or the classy Curved L.E.D.
Lighted Tri-Light Frame (P/N 3145).
Fits: ’09 FLTRSE CVO Road Glides, ’10-’12 FLHXSE CVO Street Glides &
'12 FLTRXSE CVO Road Glide Customs
K3144 Curved Lighted L.E.D. License Plate Frame (ea)
Note: Requires P/N 4146 Backplate, sold separately.
K3145 Curved Tri-Light L.E.D. License Plate Frame (ea)
Note: Requires P/N 4146 Backplate, sold separately.
K3146 Mounting Backplate for CVO FLTRSE/FLHXSE (ea)
K3145 + K3146
TRI-LIGHT CAN
BE MOUNTED
ON TOP OR BOTTOM!
K3144 +
K3146
K3144 K3145
K3146
L.E.D. LIGHTED LICENSE PLATE
FRAME WITH TRI-LIGHT
Patent Pending
Now you can add additional lighting & hide that ugly stock license plate
mount at the same time. This great looking curved frame features a white
L.E.D. license plate light & three red strip lights with running & brake
functions all wrapped in a brilliant chrome finish. Designed to mount to
the existing factory license plate bracket, installation is simplified, & with 8
degrees of tip back the rear of the bike will be transformed.
Fits: Universally bolts directly to flat stock OEM license plate mount for 4”x
7” License Plate
K3152 L.E.D. License Plate Frame with Tri-Light (ea)
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 173
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

CURVED LICENSE
PLATE FRAME WITH
RUN-TURN-BRAKE
This “frame-up” leaves no chance for
mistaken identity! With its gentle curved
contour & snug, fender hugging mount, this
new license plate frame has a distinctive look
all its own. For even more sizzle, red L.E.D. accent
lights operate in run/brake, or run/turn modes.
White L.E.D.’s provide additional plate illumination at night. A
perfect complement to Panacea Taillights & Run, Turn, or Brake
Controllers, this plate ties right in for all 3 functions. Designed
to fit 4” x 7” plates.
Fits: Any H-D Model with the standard 3-bolt fender mounted
license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
K3166 Lighted Curved Laydown License Plate
with Accent Taillights (ea)
K9166
LICENSE FRAME
& BACK PLATE SET
Uses the stock bracket.
Fits: 4” x 7” Plates
K9166 License Frame &
Back Plate Set
LAYDOWN LICENSE
PLATE HOLDER
FOR ROAD KINGS, ROAD GLIDES, &
ELECTRA GLIDE STANDARDS
Complements the lines of your
fender rather than standing up like
a billboard. Mounts in the same
location as stock.
K113 Fits: ’97-’08 Road
Kings (except
’07-’08 FLHRSE),
’98-’08 Road Glides
& ’97-’08 FLHT
Standard (ea)
K3166
K113
LAYDOWN LICENSE HOLDER
Replaces Harley’s standard 3-bolt bracket &
tilts the plate back. Kit includes rubber wedge
so you have an option as to how far the plate
lays down.
Fits: Any H-D Model with the standard
3-bolt mounted license plate bracket (Dyna,
Sportster, Heritage, Fat Boy, etc.)
K9165 Laydown License
Plate Holder (ea)
LIGHTED
LICENSE PLATE FRAME
K9165
This chrome die-cast license plate frame
incorporates two high intensity light bulbs that
are wired separately. Wire one each to your
brake & tail lamp circuits or together for an
extra bright stop or running light.
Fits: 4” x 7” Plates
K9167 Lighted License Plate
Frame (ea)
Note: Not intended to replace O.E. brake or taillight.
K9167
K9164
K3160 K3161
SWEPT EAGLE LICENSE PLATE FRAME
This contemporary eagle license plate frame can
be the final touch you need.
K3161 Fits: Universal 4”x 7” Plates &
Stock Mounting Bracket on ’97-’08
Road Kings (except ’07-’08
FLHRSE), ’98-’08 Road Glides, or
’97-’08 FLHT Standards (ea)
LONE EAGLE LICENSE PLATE FRAME
Show your American pride!
K3160 Fits: Universal 4”x 7” Plates & Stock
Mounting Bracket on ’97-’08 Road
Kings (except ’07-’08 FLHRSE),
’98-’08 Road Glides, or ’97-’08
FLHT Standards (ea)
BALL-MILLED
LICENSE PLATE FRAMES
Offered in two sizes to fit 4-3/8” x 8” &
4” x 7” plates. Some minor modifications may
still be necessary.
K9164 Large License Plate Frame (ea)
K9163 Small License Plate Frame (ea)
W W W . Z O D I A C . N L

HOW TO ORDER:
1. SELECT LICENSE HOLDER STYLE
2. SELECT REQUIRED MOTORCYCLE SPECIFIC MOUNT CLAMP
LIT/
UNLIT
K9251 + K3184
TAILLIGHT CAN BE INSTALLED
ON TOP OR BOTTOM!
K9252
+ K3185
K3188
K3187
K9252 + K3185
K3116
K9253 + K3184
K3125
CURVED SIDE
MOUNT LICENSE HOLDERS
In the past, if you wanted a cool, custom side-mount license plate you paid
through the nose. Our product brings the price down to reality without
compromising style & function. Choose your plate then get the correct
Mounting Clamps. Sized to fit 4” x 7” plates only.
1
LICENSE HOLDERS
K9253 Chrome Curved Horizontal Side Mount (ea)
K9251 Chrome Lighted Curved Vertical Side Mount (ea)
K9252 Chrome Lighted Curved Vertical Side Mount with Taillight g (ea) (
K3125 Gloss Black Curved Horizontal Side Mount (ea)
Note: Mount Clamps required for installation - Sold separately (below).
2
MOUNT CLAMPS
Required for installation of Küryakyn Side Mount License Holders.
CHROME
K3183 Fits: ’86-’12 Softail (except Rocker & ’09 FXSTSSE) without
Küryakyn Swingarm Covers (ea)
K3184 Fits: ’86-’12 Softail (except Rocker & ’09 FXSTSSE) with
Küryakyn Swingarm Covers (ea)
K3188 Fits: ’08-’12 Rocker & ’09 FXSTSSE (ea)
K3185 Fits: ’91-’05 Dyna Models (ea)
K3187 Fits: ’06-’12 Dyna Models (ea)
K3186 Fits: ’86-’12 Sportster Models (ea)
K3175 Fits: Universal
for 1-1/4” diameter tubing (ea)
GLOSS BLACK
K3116 Fits: ’86-’12 Softail (except Rocker & ’09 FXSTSSE) without
Küryakyn Swingarm Covers (ea)
K3117 Fits: ’08-’11 Rocker & ’09 FXSTSSE (ea)
K3118 Fits: ’06-’12 Dyna Models (ea)
K3119 Fits: ’86-’12 Sportster Models (ea)
K3121 Fits: Universal for 1-1/4” diameter tubing (ea)
Note: Please check local laws regarding side mount license plates before ordering.
+ 3 1 ( 0 ) 2 9 7 2 8 8 6 2 1 175
BIKE MAPS
AUDIO
LIGHTING
ACCESSO
MOUNTS
HANDLEBA
CONTROLS
FOOT
CONTROLS
CHROME
LUGGAGE
TOURING
AIR
CLEANERS
EXHAUST
PERFORMAN
MISC
INDEX

A K3159 A K3158
399
Lights Not
Included
E
B
C
D
E
K9399
K1625
K1624
K1623
F
F
F
A. LICENSE PLATE MOUNTING HOLE COVERS
With so many riders using our Side Mount License Plate Mounts or relocating their
license plate below the taillight, we needed to come up with an appealing way to cover
the exposed holes left in the fender after the stock license plate bracket is removed.
Both covers install in minutes & completely cover the footprint left by the stock mount.
Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (both
styles also cover the fourth hole found on some Dyna & Sportster Models)
K3158 License Plate Mounting Hole Cover with Emblems (ea)
K3159 Tribal License Plate Mounting Hole Cover (ea)
B. INSPECTION PLATES
This small chrome display bracket mounts
cleanly in any location dictated by local or state
regulations. Now you don’t have to mess up
a nice paint job or chrome surface with some
cheesy government sticker. Universal fitment.
K9168
K9162
Inspection Plate
3-1/2” x 3-1/2” (ea)
Texas Inspection Plate
2-7/8” x 4” (ea)
C. LICENSE PLATE MARKER
LIGHT/TURN SIGNAL MOUNT
Mount auxiliary marker lights or turn signals to
your license plate. This simple system mounts
directly to the back of your license plate with
support backing plate & two side mount brackets.
The side mount brackets have a 3/8” hole &
will accept Küryakyn Silver Bullets or L.E.D. Mini
Bullets (See pg 42).
Note: Great option for allowing the mounting of saddlebags
on bikes that need to relocate turn signals. Will not work
with Küryakyn Curved License Plate Frames.
K4247
L.E.D. LICENSE
PLATE BOLT LIGHTS
Light up your license plate whether it’s in the stock
location or custom mounted with these white L.E.D.
bolt lights. You won’t find a cleaner license plate
lighting option with a simpler installation.
K9199 L.E.D. License Plate Bolt Lights (pr)
Note: 1/4”-20 Mounting Stud. Chrome Frame sold separately (P/N K9163).
License Plate Marker
Light Mount (ea)
E. L.E.D. LICENSE PLATE
ILLUMINATORS
WITH TURN SIGNAL ACCENTS
Each License Plate Illuminator has two
L.E.D.’s. The white L.E.D. lights up the
license plate & the rear-facing red
L.E.D. can function as an auxiliary
running light, turn signal, or brake
light for added visibility. The 1/4”- 20
mounting stud makes it simple to bolt
them on, wire them in, & ride on!
K9399
L.E.D. License Plate
Bolt Lights with Red
Accent Light (pr)
F. LICENSE PLATE
HARDWARE KITS
Chrome hardware & rubber isolators
dampen vibration between your plate
& frame. Available in three styles to
accommodate a variety of plate brackets
& frames.
Fits: Most license plate brackets & frames
K1623 Button Head (kit)
K1624 Acorn (kit)
K1625 Countersunk (kit)
D. TURN SIGNAL RELOCATOR KIT
Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep
your stock turn signals. This kit takes all the guess work out of relocating your stock
signals by moving them from the fender to the license plate area. Side mount brackets
have several mounting points for lights & will accept most OEM rear turn signals.
WORKS WELL WITH:
K3155 Turn Signal Relocator Kit (kit)
������������������������������������������
Note: Will not work with Küryakyn Curved License Plate Frames. ������������������������
�����������������������
W W W . Z O D I A C . N L