Brewery Catalog - GW Kent

38
GW
KENT
Screen Gasket
www.gwkent.com 24 hours a day, 7 days a week
Screen gasket are used in processing pipeline systems for beverage industries.
Screen are made of 316 stainless steel for straining small amount of particles
during liquid transfer. Gasket material are made from FDA compliant EPDM
material. Available in 10 mesh, 50 mesh and 100 mesh.
Item Screen Mesh Catalog Price
1-1/2” Screen Clamp Gasket 10 mesh 10 mesh 40MPUS-15 $24.00
1-1/2” Screen Gasket 50 Mesh 50 mesh 40MPUS-15M $29.00
1-1/2” Screen Gasket 100 Mesh 100 mesh 40MPUS-15F $29.00
2” Screen Clamp Gasket 10 mesh 10 mesh 40MPUS-20 $29.00
2” Screen Gasket 50 Mesh 50 mesh 40MPUS-20M $32.00
2” Screen Gasket 100 Mesh 100 mesh 40MPUS-20F $32.00
2-1/2” Screen Clamp Gasket 10 mesh 10 mesh 40MPUS-25 $34.00
3” Screen Clamp Gasket 10 mesh 10 mesh 40MPUS-30 $36.00
Sock Screen Gasket
316 stainless steel 16 mesh screen. All material meets FDA, 3-A sanitary standard. Coverage of 300%
more area than conventional screen gasket. Decrease pump wear and energy consumption, smoother
operation. Available in short sock creen (3/4” length) or long sock screen (6” length).
Item Style Catalog Price
1-1/2” Screen Gasket Long Sock 1107-15L $46.50
2” Screen Gasket Long Sock 1107-20L $49.50
1-1/2” Screen Gasket Short Sock 1107-15S $46.50
2” Screen Gasket Short Sock 1107-20S $49.50
NPT Check Valve & Strainer
NPT Check Valve
304 stainless steel spring check valve
with female NPT connection for
liquid or gas application.
Item Catalog Price
1/4” Check Valve NPTF 103-14 $24.00
1/2” Check l Valves NPTF 103-12 $24.00
3/4” Check Valves NPTF 103-34 $27.00
1” Check Valves NPTF 103-10 $35.00
NPT In-line Y
Strainer
304 stainless steel Y type strainer
for in-line liquid application, like
glycol return line to strain out
particles to protect pump.
Item Catalog Price
3/4” Y strainer NPTF 104-34 $25.00
1” Y strainer NPTF 104-10 $30.00
1-1/4” Y strainer NPTF 104-114 $39.00
1-1/2” Y strainer NPTF 104-15 $45.00
.gwkent.com info@gwkent.com
© G.W. KENT, INC . March. 2012
© G.W. KENT, INC. March, 2012
How to determine
Tri-clamp size??
Tri Clamp Ferrule OD
1” = 1.984”
1-1/2” = 1.984”
2” = 2.516”
2-1/2” = 3.047”
3” = 3.579”
4” = 4.682”
www.gwkent.com 24 hours a day, 7 days a week
How to determine
national pipe size??
OD Fraction Inch
(for quick reference only)
Pipe Thread Size
5/16 1/16
13/32 1/8
35/64 1/4
43/64 3/8
27/32 1/2
1-3/64 3/4
1-5/16 1
1-21/32 1-1/4
1-29/32 1-1/2
2-3/8 2
2-7/8 2-1/2
3-1/2 3
4 3-1/2
4-1/2 4
Tel: 800-333-4288 Fax: 800-500-7505
GW
KENT
Pipe sizes do not refer to any physical dimensions. The outside
diameter of each pipe or fitting must by measured and compared to
the table for size identification. For example, a 3/4” NPT pipe thread
has an outside diameter of 1.050 inches.
39