Download Manual - Dateline

Infiniti Permanent Application MethodsVirgin Head/First Colour - Deposit Only1. Mix required Infiniti Permanent shade with Infiniti Developer. Apply to mid-lengths and ends starting at the darkest areas.(Step 1 & 2) Leave approximately 1 – 2cm of hair at the root area untouched See Diagram.2. Immediately mix new batch of colour and apply to root area (step 3). Process for 30 minutes without heat or 15 – 20 minutesgentle heat.Virgin Head/First Colour – Lightening 2 or more depths1. Mix required Infiniti Permanent shade with Infiniti Developer. Apply to mid-lengths and ends starting at the darkest areas.(Step 1 & 2) Leave approximately 1 – 2cm of hair at the root area untouched.2. Immediately mix new batch of colour with 1 volume developer strength lower and apply to root area (Step 3) See Diagram.Process for 30 minutes without heat or 15 – 20 minutes gentle heat.Darkening1. Mix required Infiniti Permanent shade with Infiniti Developer ensuring sufficient colour for full application.RegrowthApply from roots to ends (Step 1). Process for 30 minutes without heat or 15 – 20 minutes gentle heat.1. Mix required Infiniti Permanent shade with Infiniti Developer, apply to root area only (Step 1). Process for 20 – 25 minuteswithout heat or 10 – 15 minutes gentle heat.2. It is recommended to refresh ends with a regrowth application by applying Affinage Sapphire Ice Defender on mid-lengths andends. Apply remaining product to this area for 5 – 10 minutes without heat (Step 2 & 3).page 13