UFGS 09 30 13 Ceramic Tiling - The Whole Building Design Guide

Typically glass mosaic tiles are recommended forwalls only.**************************************************************************Furnish glass mosaic tile that complies with ANSI A137.2. Provide nominaltile size(s) of [25 by 25][_____] mm [1 by 1][_____] inch.2.1.5 Glazed Wall TileFurnish glazed wall tile that has cushioned edges and trim with lead-free[bright][matte] finish. Provide nominal tile size(s) of [106 by 106][106by 150][150 by 150] mm [4-1/4 by 4-1/4][4-1/4 by 6][6 by 6] inch.2.1.6 Accessories**************************************************************************NOTE: Where glazed accessories are required, thecolor, style, and number will be added to theaccessories table in this paragraph, unless otherwise noted. For Navy projects add a sentencestating that color shall be as indicated since theyprovide color information in the drawings. Providemounting heights for accessories in the drawings.Coordinate this paragraph with Section 10 28 13TOILET ACCESSORIES.**************************************************************************Provide built-in type accessories of the same materials and finish as thewall tile. Provide accessories as follows:QuantityLocationRecessed soap holders [_____] [_____]Tumbler holders [_____] [_____]Combination tumbler andtoothbrush holdersTowel bars, [stainlesssteel][ceramic] [600] [750] mm[24] [30] inch long, two towelposts[_____][_____][_____][_____]Robe hooks [_____] [_____]Roll paper holder [_____] [_____]Recessed soap holder and handhold combination: supportstatic load in compliance withASTM F446[_____][_____]2.2 SETTING-BEDSubmit manufacturer's catalog data. Compose the setting-bed of theSECTION 09 30 13 Page 12