LOW VOLTAGE CONTROLLER

LOW VOLTAGECONTROLLERSPECIFICATIONS:The LVC (Low Voltage Controller) shall be anAmico Alert-2 series.When an over bed light is controlled through anurse call handset, bedrail or pendant switch anAmico LVC is required.The Amico LVC housing shall be made of 16gauge aluminum with an 18 gauge galvanized steelmounting plate.The LVC can be controlled Sequential orIndividual.For Sequential control, a momentary single poleswitch is used to control both lights (can be installedat multiple locations and are wired in parallel) asfollows:1. Up light on2. Up light off and Down light on3. Both on4. Both offFor Individual control (each load is controlledindependently), a momentary 3-way switch isused for control (can be installed at multiplelocations and are wired in parallel) as follows:Up: Up light on and off cycles with each push ofthe button.Down: Down light on and off cycles with eachpush of the button.FEATURES:Capable of sequential or individual control of (2)circuit loadsLow voltage control for patient safetyUltra-compact design allows for installation withinalmost any fixtureCompatible with all manufactured nurse-callproductsRelay switching for two light outputs (up & down)Available voltage: 120 Vac = 5 amp resistive240 Vac = 5 amp resistive277 Vac = 3 amp resistive(50/60 Hz)The LVC is a UL Recognized Component.P ROJECT:

M OUNTING & DIMENSIONAL D ATA inch[mm] M ODEL NUMBERSLow Voltage Controller - 120 Vac = W-LVC-120Low Voltage Controller - 240 Vac = W-LVC-240Low Voltage Controller - 277 Vac = W-LVC-277D ISTRIBUTED BY :14 Madison Rd., Fairfield, NJ 07004 USA Tel: 1-877-GO AMICO (1-877-462-6426)85 Fulton Way, Richmond Hill, ON L4B 2N4 Canada Fax: (905) 764-0862 www.amico.comSEP-05