BFB-3000 Print Head Calibration - Alibre
BFB-3000 Print Head Calibration - Alibre
BFB-3000 Print Head Calibration - Alibre
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>BFB</strong>-<strong>3000</strong> <strong>Print</strong> <strong>Head</strong> <strong>Calibration</strong>6. Reading the calibration scaleThe lines on the calibration print are offset by 0.1 mm. The amount of misalignment caneasily be calculated by counting the amount that scale 2 or 3 is offset from scale 1.Scale 1 is printed by extruder 1, this is the reference extruder and all offsets are relative toextruder 1.Scale 2 is printed by extruder 2, this amount of error is the amount extruder 2 requires itsoffsets to be adjusted by.Scale 3 is printed by extruder 3, this amount of error is the amount extruder 3 requires itsoffsets to be adjusted by.Figure 1Document No: D1002545
Change language