Verti-Mix

14Verti-Mix Double Kthe easy to pull all-rounderPreserving of feed structure, fast mixing, low wear, low maintenance costs anda low power requirement are the advantages of 2-auger vertical mixers in general. Butthey all have the disadvantage, that they cannot be fitted with large-volume tyres withoutincreasing the machine height exorbitantly.The Verti-Mix Double K is the only mixer on the market which combines theadvantages of the classical vertical mixers (preserving the feed structure,fast mixing, low wear, low maintenance, low power requirement) withthe advantages of the horizontal mixers (narrow design, highdimensionedtyres) because of its special mixer design.Special mixer designThe Verti-Mix Double K-types are equipped with differentmixing augers; the front auger has a biggerdiameter than the one in the rear. Also the bottomplate is adapted to this design; therefore the mixingcontainer is conical in the rear part.Through this arise a row of advantages for the everydaymixing application:- The starting torque is reduced up to 15%- Maintenance-free discharge via side doors- Optimum drawbar weight because of the specialmixer design.Special mixer design -big tyresThe special mixer design makes a fixingof 22,5“-tyres possible without any disadvantagein the measurements.This leads to the following advantages:- Very good mobility in connexion withexcellent running characteristics becauseof single axle with 22,5“ tyres- Low chassis maintenance compared withtandem axle solutions- Narrow and low machine because thetyres are fixed beside the mixer and donot overlap above the mixer