NetBackup 5230 Appliance Initial Configuration Guide - 2.6.1.1

Initial configuration proceduresPerforming the initial configuration on a NetBackup 52xx appliance from the NetBackup Appliance Web Console46Option or data entry fieldDescriptionAppliance Role■■MasterWhen you select this role, no further action isrequired. Click Next to continue.MediaIf you select this role, do not continue configurationuntil you have performed or verified the followingconfiguration on the master server that you want touse with this media server. The following linkprovides specific instructions about how toaccomplish the necessary tasks:See “Configuring a master server to communicatewith an appliance media server” on page 56.■■■■■Make sure that the master server and this mediaserver have compatible software versions.Add the name of this media server to the masterserver that you plan to use with it.Open the following ports on the master server toallow communication to this media server:vnetd: 13724bprd: 13720PBX: 1556Open the following ports if the master server isan appliance master server and TCP is used:443, 5900, and 7578.Make sure that the date and time of this mediaserver matches with that of the master server.Master server nameIf you selected the Media Server role, identify the nameof the master server that must communicate with thismedia server as follows:■■For master servers with only one name and IPaddress:Enter the host name or the IP address of the masterserver and click Add.For clustered master servers or master servers withmultiple names and IP addresses:Enter each host name or IP address in the field (oneat a time) and click Add.Note: If the master server is clustered, the first entrymust be the virtual host name of the cluster.