PRODUCTION CATALOG

PART Inew!An optical communication cablefor inner liningТU VU 400424686.012-2010Technical conditions are worked out and approved according to thetechnical requirements of realization of xPON-net project in Republicof Belarus in 2010-2011, followed by the letters of RUE Beltelecom No27-123/1286 29.04.2010 and No27-1-23/2563 17.08.2010 and STB1201-99 “Opticalcommunication cables. General technical requirements”, agreed by the letterof Research Studies Institute of Fire Safety and Emergencies, MES of Belarus18.08.2010 No52/7-8/359 adm., JSC Giprocvayz, are added to the state registerby The State Committee for Standardization of the Republic of Belarus18.08.2010 No 029488. The cables are had the conformity certifications, givenby the Federal Communications Agency of RF.FUNCTIONThe cables are made for the local nets organization, for commutation use,for parch cords and fiber-optical assemblies make, for layout on smalldistances(with the opportunity of immediate connection of a connector),for use in intersystem of inner pipelines, including a spacer in struts(withthe opportunity of immediate connection of a connector), for the use in ahorizontal intersystem.An application area of the cables according to the fire safety attributes inaccordance with the requirements STB 1951-2009, GOST R 53315-2009.DESIGN1. An optical fiber*.2. Buffer coating 300-1300mkm.3. Strengthening aramide fibers.4. A clad layer from polymeric halogen free material with small smokeemission with flame-retarding ability.• *The number of fibers from 1/96. Optical fibers are colour marked.• The types of the fibers used in cables:The standard single-mode – D(ITU-T G.652:2009);The single-mode resistible to bends – A1;A2;B2;B3; (ITU-T G.657:2009)Gradient and multimode 50mkm; 62.5 mkm – A1a; A1b (IEC 60793-2:2007)The colour of the jacket and buffer coating is agreed during the order.16