PRODUCTION CATALOG

Wire of Type A (AAC)PART IIIFUNCTIONElectricity transmission in overhead electrical networks on the grounds of allmacroclimatic regions with moderate and frigid climate.DESIGNMultiwire, twisted from hard aluminium wires.SERVICE AND ASSEMBLY CONDITIONSInstallation is carried out in the air on the supports of power lines incompliance with technical operation instructions of electrical installationselectric power plants and networks.Operating temperature – from -60°C to 40°C.Admissible continuous temperature during operation – not over 90°C.Service life – not less than 45 years.REGULATIONSState Standard 839-80Nominal crosssectionarea, mm 2Wirediameter,mmElectrical resistance of 1 kmof phase conductor to direct current,Ohm, not overTensile stressof wire, N, notless thanSpecification10 4, 1 2,8631 1950 27,416 5,1 1,8007 3021 4325 6,4 1,1498 4500 6835 7,5 0,8347 5913 9440 8,1 0,7157 6800 109,450 9,0 0,5784 8198 13570 10,7 0,4131 11288 18995 12,3 0,3114 14784 252Estimatedweight of 1km of wire, kg29