fire detection systems fire detection systems - coting.si - coting.si

Recommendations

Info

X-IND CHARACTERISTICS WORKING VOLTAGE RANGE: CURRENT CONSUMPTION: This remote indicator can be used with any fire alarm detector, be it of the conventional or addressable/analogue types, to indicate remotely the activation of the relevant detection device. It’s main characteristics are the high visibility due to the alternate blinking of two high efficiency LED’s (“A” Version), and the wide operating voltage range 3 to 15 DC Volts, with a minimum of 300 µ A current consumption. The two connections of this device are non-polarized, avoiding wasted time at the installation phase. The unit comes complete with a face plate compatible with standard flush mounting boxes. JUNCTION BOX 485 INT CHARACTERISTICS SUPPLY VOLTAGE: OPERATING CURRENT: MAX BAUD RATE: Pr.Id.:32521 3 - 15 V DC 300 µA - 15 mA Pr.Id.:32604 Our ABS molded multi purpose junction box is provided in RED or WHITE color with matching snap-on cover and has four mounting holes compatible with our single channel addressable modules. It is intended for surface use but can also be embedded. Weight with cover: 74 grams. Pr.Id.:32605 20-30V. 25mA max. 9600 baud FLASHING REMOTE INDICATOR DIMENSIONS: FACE PLATE DIMENSIONS: INDICATOR: WEIGHT: DIMENSIONS: This optically isolated converter can be used to connect RS232 signaling equipment over distances up to 1200 m. It is mainly used in conjunction with the JUNO panels and repeaters. ACCESSORIES 76 x 76 x 2 (mm) 68 x 33 x 25 (mm) ABS MULTI PURPOSE JUNCTION BOX 19 RS232/RS485 CONVERTER 44 grams H: 51 W: 101 D: 16 (mm)
CONVENTIONAL DETECTORS S-T Series �Product Features: �4 wire models �Dual LEDs for 360°visibility �Advanced detection and discrimination algorithms �Easy installation and maintenance �Sleek low-profile housing design �Durable sensor head, no need for replacement �SMD circuit board design-satisfactory quality and reliability guaranteed �Integrated heat detector for S-T models �Five-year limited warranty �N/C (normal/close)-N/O (normal/open)selectable relay output �AR (Auto Reset) function for security systems �(optional for 4 wire models) �Sensor base option: standard and Shottky Diode S-O Series �4 wire models �Dual LEDs for 360°visibility �Advanced detection and discrimination algorithms �Easy installation and maintenance �Sleek low-profile housing design �Durable sensor head, no need for replacement �SMD circuit board design-satisfactory quality and reliability guaranteed �Remote LED �Five-year limited warranty �N/C (normal/close)-N/O (normal/open)selectable relay output �AR (Auto Reset) function for security systems �(optional for 4 wire models) �Sensor base option: standard and Shottky Diode Pr.Id.:32541 Pr.Id.:32540 Model S-O S-T 2/4 Wire 4 4 Thermal / Optical Optical Thermal / 57�C Voltage DC 10-15V 10,2-13,8V Standby Current (Max) 55�A 370�A Alarm Current (Max) 50mA 35mA Surge Current (Max) 150�A Start-Up Time (Max) 60sec 120sec Permissible Current (Max) 80mA 80mA Frequency 4-6sec 3-5sec Base Model S-B S-B 20
Page 1: FIRE DETECTION SYSTEMS Product cata
Page 4 and 5: RAIK Pr.Id.:30100 1-3 loops analogu
Page 6 and 7: 1, 3 LOOP Juno-NET 100 Pr.Id.:30109
Page 8 and 9: J-NET-LOOPCON CHARACTERISTICS DIMEN
Page 10 and 11: or many fire alarm systems, all tha
Page 12 and 13: X-MCPA-KAC ELECTRICAL CHARACTERISTI
Page 14 and 15: X-VULCAN CHARACTERISTICS STANDARD S
Page 16 and 17: X-IN X-I/O X-IN ELECTRICAL CHARACTE
Page 18 and 19: X- X-LSCISO TECHNICAL CHARACTERISTI
Page 22: ACCESSORIES, GAS DETECTORS Air Samp

fire detection systems fire detection systems - coting.si - coting.si

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?