2008 US - Marine Office

Macerator PumpCE marked according tofollowing standards:Recreational Craft Directive 94/25/EECISO8846: Small Craft – Electrical devices – Protection againstignition of surrounding flammable gasesISO10133: Small Craft – Electrical systems – Extra-low voltaged.c. installationsElectromagnetic Compatibility Directive 89/336/EECEN55014: 1993/Radio disturbanceThe Johnson Pump macerator pump, TA3P10-19, takes care oftoilet waste. A rotary cutter shreds waste before it is pumped intoor out from the holding tank. The pump should be connected asclose as possible to the holding tank discharge outlet or the bowldischarge outlet. Note! Use unbleached lavatory paper only.Motor has built-in thermal protection reducing the risk of damagewhen the pump is run dry.TA3P10-19 – 12/24 VPump body: Phenol plastic (PF)Impeller: 09-1052S-9 (nitrile)Housing: Thermoplastic polyester (PET)Shaft:Stainless steelSeal:Lip sealHose connection: Inlet 1. 1 /2"(dia 38 mm) hose or 1. 1 /2" NPTOutlet 25.4 mm (1") hoseMotor:12 or 24 V DC (with built-in thermal protection)Capacity: 37L/min at 0.2 bar (10 GMP at 6.7 ft)Dimensions and WeightLength:230 mm/9.06"Width:108 mm/4.25"Height:82 mm/3.23"Weight:1.9 kg/ 4.2 lbsOrder No. Max amp draw Fuse size10-24453-01 12 V 15 2010-24453-02 24 V 9 10Johnson PumpWPS pump forflushing waterFlush buttonShoresideholdingtankMaceratorpumpMacerator pumpThree-way valveHolding tankThree-way valveViking Thrudeck and BulkheadWhen the power is out you can always depend on the hand operated diaphragm bilge pump from Johnson Pump. The Viking pump can alsobe used for pumping toilet waste due to the large valve openings. The pump is available in two models for various installation alternatives. Itcan be mounted behind walls, through deck and under bulkheads.Viking Thrudeck for installation behind vertical wall or under deck with sealing boot, complete with a cover plate. Viking Bulkhead for surfaceinstallation with horizontal lever.Pump Body: PPShaft: Stainless steel AISI 316Screws: Stainless steel AISI 316Elastomers: NitrileHandle: Anodised aluminiumConnection: 1. 1 /2" or 1" hoseDimensions and WeightDiameter: 164 mm/6.45"Handle length: 285 mm/11.22"Width:253 mm/9.96"Height: 133 mm/5.23"Weight: 2 kg/ 4.5 lbsCapacity Data(At 1 m/3.28" suction height : 0.9 L/stroke)Capacity at:60 stroke/min 54 L/min / 14.5 GPM80 stroke/min 72 L/min /19 GPM100 stroke/min 90 L/min/ 24 GPMMax suction height 4 m/13 ftOrder No. Description70-50005 Thrudeck 1. 1 /2"70-50025 Thrudeck 1"70-50007 Bulkhead 1. 1 /2"70-50027 Bulkhead 1"18