Geometric Modeling of the Hull Form Summary

More documents

Recommendations

Info

Task 1. From Curves to Surfaces (3)• Set layer active and draw a curve joining the points of each section thatlie on the base plane• Set layer active and generate the bottom surface by using the base line curve and the FOB as edges• Generate a single hull surface by curves from the stern contour to thebow contour• Determine the FOS curve– Intersect the surface with the tangent plane– To guarantee a complete intersection curve move the plane inwards by asmall distance (Example: 0.05 m)– Fair the resulting curve– Project the curve back into the correctly positioned tangent plane• Set layer active and draw a curve joining the upper of each crosssection and contourM.Ventura Hull Form Geometric Modelling 55Task 1. From Curves to Surfaces (4)M.Ventura Hull Form Geometric Modelling 5628
Task 1. From Curves to Surfaces (5)M.Ventura Hull Form Geometric Modelling 57Task 1. From Curves to Surfaces (6)• Curve can be faired interactively by deletingand moving points• function can also beused, but is not very efficientM.Ventura Hull Form Geometric Modelling 5829
Page 1 and 2: Geometric Modeling of the Hull Form
Page 3 and 4: From CAM to CAD• With the continu
Page 6: Hull Form Representation Methods (3
Page 10 and 11: Curves Model (Wireframe)Requisitos
Page 12 and 13: Guidelines for Work Sequence (2)•
Page 14 and 15: Guidelines for Work Sequence (6)•
Page 16 and 17: Deck Surface Generation (1)Profile
Page 18 and 19: Thruster Tunnel Modeling (2)Trim cy
Page 20 and 21: RoPax VesselM.Ventura Hull Form Geo
Page 22 and 23: Bibliography (3) Submanian, V.A. an
Page 24 and 25: Circular Arcs• Draw arc• Create
Page 26 and 27: Annex C. Guide for Lab ClassesTask
Page 30 and 31: Task 1. From Curves to Surfaces (6)
Page 32 and 33: Task 2. Modeling Specific Areas•
Page 34 and 35: Task 4. From Main Curves to Surface
Page 36 and 37: Generating the Surfaces (2)Sweep th
Page 38 and 39: Getting the Lines Plan - SectionsDe
Page 40 and 41: Creating the Drawing in AutoCad (1)
Page 42 and 43: Aligning the Views in AutoCad (3)Do
Page 44 and 45: Rhinoceros 3D (2)• Surface creati
Page 46 and 47: AutoShip v8.0• www.autoship.com (
Page 48 and 49: Ficheiro de para PreFitThe format
Page 50 and 51: Pilot3D v1.222 (1)• www.pilot3d.c
Page 52 and 53: ShipConstructor• www.shipconstruc

Geometric Modeling of the Hull Form Summary

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?