Plastic

Plastic Additive StandardsBlowing AgentsBlowing agents are sometimes also called chemical foaming agents. They are used to release gas into the plastic or resin. Blowingagents can be used to reduce weight, improve softness, provide insulation, add shock absorption properties or add resilience in thefinal product.Chemical blowing agents (as opposed to physical blowing agents such as nitrogen gas) are principally organic chemicals thatdecompose at elevated temperatures to release a gas during decomposition that can add a cellular structure in the plastic.CPW-100Harwick Standardchlorinated paraffin waxCAS Number 63449-39-8H 3 C CHCl CH 2 CH n 3PLAS-BA-001S 1000 µg/mL in Hexane 1 mL Formula UnspecifiedPLAS-BA-001N 50 mg M.W.Blowing Agents, PlasticizersCelogen ® AZChemtura CorporationcarbamoyliminoureaOCAS Number 123-77-3N NH 2H 2 N NPLAS-BA-002S 1000 µg/mL in Hexane 1 mL Formula C 2H 4N 4O 2OPLAS-BA-002N 50 mg M.W. 116.08Coupling AgentsCoupling agents promote the physical or chemical interaction with the polymer.Silquest ® A-187Chemtura Corporationgamma-glycidoxypropyltrimethoxysilaneH 3 COCAS Number 2530-83-8PLAS-CA-004S 1000 µg/mL in Hexane 1 mLOSiOCH 3Formula C 9H 20O 5SiOOPLAS-CA-004N 50 mgCH 3M.W. 236.38Silquest ® A-1100Chemtura Corporationgamma-aminopropyltriethoxysilaneCH 3CAS Number 919-30-2OCH 3CH 3PLAS-CA-002S 1000 µg/mL in Hexane 1 mL H 2 NSi OFormula C 9H 23NO 3SiOPLAS-CA-002N 50 mg M.W. 221.37Silquest ® A-1102General Electricgamma-aminopropyltriethoxysilane (Tech grade)CH 3CAS Number 919-30-2OCH 3CH 3PLAS-CA-003S 1000 µg/mL in Hexane 1 mL HSi2 NOFormula C 9H 23NO 3SiOPLAS-CA-003N 50 mg M.W. 221.3712 AccuStandard’s Quality System is Certified to Comply with International ISO 9001 & ISO 17025