Plastic

Plastic Additive StandardsAntifoamsAntifoaming agents (sometimes called defoamers) act to stop foaming during processing. Foaming can cause both processingproblems as well as weak spots in the final product.Antifoaming agents typically work by reducing surface tension breaking up the foam. There are many different types of antifoamingagents such as silicones, polysiloxane oils, surfactants, or fatty acids.SF100GE SiliconsDimethyl silicone fluidCH 3CAS Number 9016-00-6PLAS-AF-001S 1000 µg/mL in Hexane 1 mL * Si O*Formula (C 2H 6OSi) xPLAS-AF-001N 50 mgCH 3 nM.W.AntidegradantsAntidegradants include a broad category of additives used in compounding to slow deterioration that can occur due to oxidation,ozone, light or any combination of these conditions. It is basically a generic term for additives that include antioxidants,antiozonants, and UV Stabilizers.Ethanox ® 3141,3,5-Tris(3,5-di-tert-butyl-4-hydroxybenzyl)-1,3,5-triazine-2,4,6-(1H,3H,5H)-trioneAlbemarle CorporationHOCAS Number 27676-62-6PLAS-AX-084S 1000 µg/mL in Hexane 1 mL Formula C 48H 69N 3O 6PLAS-AX-084N 50 mg OM.W. 784.08N NONOOHOHSantoflex ® 77PDSolutia Inc.N,N’-bis(1,4-dimethylpentyl)-p-phenylenediamineCAS Number 3081-14-9PLAS-AD-002S 1000 µg/mL in Hexane 1 mL Formula C 20H 30N 2PLAS-AD-002N 50 mg M.W. 304.58HNHNSantoflex ® IPPDSolutia Inc.N-phenyl-N’-propan-2-yl-benzene-1,4-diamineHNNHCAS Number 101-72-4PLAS-AD-003S 1000 µg/mL in Hexane 1 mL Formula C 15H 18N 2PLAS-AD-003N 50 mg M.W. 226.32Wingstay ® LGoodyear Tire & Rubber CompanyButylated reaction product of p-cresol and dicyclopentadienePLAS-AD-001S 1000 µg/mL in Hexane 1 mLOHCAS Number 68610-51-5FormulaC 11H 20OH[C 12H 23OH] nC 4H 9PLAS-AD-001N 50 mg M.W. 600-800xy AccuStandard’s Quality System is Certified to Comply with International ISO 9001 & ISO 17025