1694M - Venture Tape

30 Commerce Road Phone: 1-800-343-1076Rockland, MA 02370 Fax: 781-871-00651694MTechnical Data SheetSUPER CONDUCTIVE, POWDER PAINTING, FOILMASKING TAPEDESCRIPTION:APPLICATIONS:A high temperature resistant, masked, tin plated copper foil tape coated with anaggressive conductive pressure sensitive adhesive. The RECESSED, removablepaint mask is a 2 mil heat stabilized film adhesive coated with a high temperatureresistant removable adhesive designed for its easy and clean removability.Designed to meet the rigorous powder painting process by providing a noncorrosiveconductive surface for shielded sheet metal electronic enclosures.TECHNICAL DATAIMPERIALMETRICThickness: Total Thickness: 7.75 mils (0.00775”) 0.1960 mmFoil Thickness: 3.0 mils (0.003”) 0.076 mmAdhesive Thickness: 1.5 mils (0.0015”) 0.038 mmMask Thickness: 2.0 mils (0.002’) 0.051 mmAdhesive Thickness: 1.25 mils 0(.00125”) 0.0316 mmAdhesion:Peel (Foil) PSTC #1: 45 oz/inch width 12.5 N/2.5 cmShear PSTC #7: Indefinite @ 2.2 psi 15.2 kPaPeel (Mask) PSTC #1: 20 oz/inch width 5.7 N/2.5 cmTensile PSTC #31 (foil only): 30 lbs/inch width 136 N/2.5 cmElongation PSTC #31: 6% 6%Low TemperatureApplication: 10 o F -12 o CTemperature Resistance: -10 o F to 400 o F -23 o C to 206 o CRelease Liner: 65 lb. bleached kraft 106 GSMSee Reverse SideRevision # 13-2-06

30 Commerce Road Phone: 1-800-343-1076Rockland, MA 02370 Fax: 781-871-0065Technical Data SheetTECHNICAL DATAIMPERIALMETRICShielding Effectiveness: Frequency AttenuationMIL 285M100 Khz 141 db1 Mhz 137 db10 Mhz 114.5 db50 Mhz 96 db100 Mhz 101.5 db200 Mhz 111 db400 Mhz 102 db800 Mhz >128 db900 Mhz >127 db1 Ghz >116 db5 Ghz 92 db10 Ghz 80 db17 Ghz 87 dbResistance: .002 ohms/in 2MIL 202C METHOD 307Standard Widths: 1/2, 3/4, 1, 1 1/2” 13, 19, 25, 38 mmStandard Length: 36 yds 33 MIMPORTANT INFORMATION:The information cited is in good faith and has been established from sources held to be secure and reliable. The values listed aretypical properties and are not intended to be used as specifications for defined applications. User must determine the productsuitability for the end use application and assume all risks and liabilities. 9-13-02Revision # 13-2-06