SVP Select Valve Program - Südmo

SÜdmo Svp selectvalve programProduct leafletGeneral Product informationDrawing on many years of experiencein the design and construction ofvalves, Pentair Südmo developed acomprehensive and modular standardsingle seat valve program. Manufacturedfrom solid bar stock, the SVP Select valvesare characterized by their machinedsurfaces, long service life and resistanceto aggressive media. They are used inareas where hygienic conditions are ofthe utmost importance. The actuatorscome standard with the highest holdingpressures on the market and have a10-year prorated warranty. Additionally,the actuator can be reversed in the fieldwithout the use of a press.Benefits• Highest holding pressures• Body machined from a solid piece of barstock• Field reversible actuator• Modular components• O-rings (not V-rings) require no specialtools for seal insertion• 10-year prorated actuator warrantAll materials are FDA and 3-A compliant.Because components are machined,higher grade alloys can also be used forthe wetted components. The stems areoffered with o-rings for superior sealing orPEEK for aggressive media conditions withour standard actuator. The modular designallows for common seal dimensions andactuators for the various sizes. Because nospecial tools are required, maintenance ofthe valve is quick and easy. When needed,the components can be supplied withimproved finish and even electropolished.With the addition of Pentair Südmo’sIntelliTop 2.0, the valves can be operatedand monitored through the control system.Backed by Pentair Südmo’s proventechnology, superior service and extensiveapplication know-how, the Pentair SüdmoSVP Select Valve series delivers theversatility and reliability that you demand.Fluid process solutionssvp select Valve program

SÜdmo Svp selectvalve programProduct leafletStandard specificationsMaterials- Product contact: 316L (1.4404)- Non product contact: 304 (1.4301)- Optional: Hastelloy, AL6XNSeals- Standard: EPDM- Optional: HNBR, PEEK, FPM (Fluoro-Rubber), FFPM (Perfluorinated Fluoro-Rubber)Operating Pressures- Control air pressure: Standard 87-116 psi- Optional: 50 psi with booster- Product pressure: Standard 87 psi with87 psi air pressure- Holding pressure: Min. 100 psi witho-ring stemConnections- Standard: Sanitary O.D. tube butt weld- Optional: Sanitary O.D. tube clampWelding ends for metric tubesWelding ends for ISO tubesDIN nutFinishes-