RIFLES AND SHOTGUNS AMMUNITION - Browning International

The return of a legendary weaponCABM.O.A. Trigger System.Controlled-Round Feed (CRF) Bolt.Blade-type Ejector.Three-position Safety.Hammered Barrel.The M.O.A. Trigger System of theModel 70 operates on a simple leverprinciple. The trigger A, actuatorB, and sear C are shown above.All internal components, axis’s andsprings, are carefully precisionmadein stainless steel.In addition, in order to increasetheir resistance to corrosion, andfor a maximum reduction of parasiticfriction, the sear and actuatorhave received a nickel Teflonplating.This is one of the characteristicsthat allowed the Model 70 rifle tobe chosen as the ”Bolt-action Rifleof the Century”.The wide-jaw puller slides smoothlyand contacts about a quarter of thebase of the cartridge, which allowsperfect control from the time itleaves the magazine and enters thechamber, then immobilises it until itis completely ejected.This proven concept allows theextraction of an unfired cartridgeeven if it has not been completelyintroduced into the chamber.A blade-type ejector allows fullcontrol when ejecting a case. Pullthe bolt back slowly and the emptycase gently pops out, which is perfectfor target shooters and vermincontrol rifles.Pull the bolt back quickly and thecase to exits the chamber withgreater force. The blade-type ejectorhelps to eliminate short-strokingmalfunctions.We have again improved the threepositionsafety on the new Model70. It has proved effective andhighly popular with hunters andshooters for decades.Convenient to operate with thethumb of the firing hand, the Model70 safety lifts the firing pin awayfrom the sear. When the safety isin the middle position, the bolt canstill be operated, allowing unfiredcartridges to be ejected with thesafety on.It engages smoothly, and it allowseasy determination of the safetystatus of the rifle.The barrels for the Model 70 areproduced in the same Americanplant that produces barrels forthe rifles and machine guns usedby the American Armed Forces allacross the world.Each Model 70 barrel is cold hammeredfrom a solid billet of steel forexcellent accuracy and longevity.Rotary hammers shape the barrelaround a mandrel to create therifling.The barrel is threaded, bevelled,and installed on the receiver. Thechamber is then reamed and thebolt is headspaced.Bolt-action rifles7