installation manual operation manual inspection log kannad 406 as

More documents

Recommendations

Info

ANTTSTOFFONRCINSTALLATION MANUAL OPERATION MANUAL INSPECTION LOGKANNAD 406 AS6. Manual Activation• Switch to "ON" position.Switch ON• Try to keep the antenna vertical.- The ELT starts with the self-test sequence.- 121.5 / 243 MHz transmission starts immediately after the self-test.- 406 MHz transmission starts after 50 seconds.- During transmission, buzzer operates and visual indicator flashesperiodically.PAGE 104FEB 01/2008
INSTALLATION MANUAL OPERATION MANUAL INSPECTION LOGKANNAD 406 AS7. Water Switch ActivationThe ELT switch must be in the "ARM" position and the Water SwitchSensor must be connected.Fasten the ELT to the liferaft with the tether line.Put the ELT in the water to float safely.Check that buzzer operates and visual indicator flashesperiodically.The ELT should float withantenna in vertical positionPAGE 105FEB 01/2008
Page 1 and 2: © KANNAD: This document is the pro
Page 3: INSTALLATION MANUAL OPERATION MANUA
Page 6 and 7: INSTALLATION MANUAL OPERATION MANUA
Page 19: INSTALLATION MANUAL OPERATION MANUA
Page 56: Distributed byManufactured byKANNAD

installation manual operation manual inspection log kannad 406 as

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?