Accessories (optional) - Marine Office

Heater Kit: DBW 2010 / 20161.Heater kit –scope of deliveryORDER NUMBERSDBW 2010 12 Volt Diesel: 357324DBW 2010 24 Volt Diesel: 356700DBW 2016 12 Volt Diesel: 9012936ADBW 2016 24 Volt Diesel: 9012935ADelivery scopeItem Qty Description1 1 heater 12 or 24 V4 hose clamps Ø 101 hose clamp Ø 291 gauge (for checking of spark setting)1bag (with electrical hardware)consisting of:2 1 switch with lamp 12 or 24 V3 1 plate ( to item 6)4 1 central plug (to item 6)4 plug connector1 connector housing2 insert, male16 insert, female2.3.4.Water systemIn addition, the water pump U 4810 is needed.For the distribution of heat in your boat you mayneed extra hoses, valves, expansion tank, convectors,air handlers etc. Please compose your water system individually.Fuel supply systemPlease compose the adequate system components for yourboat individually. For the installation of the heater in theengine compartment the fuel supply system has to be fireresistantaccording to EN ISO 7840.Exhaust system (optional)See page36See page52-57See page43-44See page40-42Please order exhaust hose, the exhaust silencer and skin fittingadditionally. Depending on the installation position andlength of the exhaust pipe you may need a condensationwater drain and an exhaust pipe insulation additionally.5.Accessories (optional)For extension of your heating system you findcomfort control elements as well as otherinstallation and system components in theaccessories section.See page37-6230