CEL | Isolators | Helix Cut Outs

More documents

Recommendations

Info

The Isolator RangeThis range offers really positive double pole switched isolation with alockable cover for added security and safety. The isolators can be fittedwith fuse carriers, MCBs or controls for Festive Lighting and feature theinnovative Charles Endirect sliding interlock. This safety feature meansthat the fuse can only be withdrawn when the switch is in the ‘off’position. The range consists of four different sized models from 1 to 4widths, ie. L1, L2, L3 and L4.The advantages for youManufactured for Quality:3 Designed to meet the requirements of BS76713 Full compliance with current HSE, IEE and ILP standards3 Fitted with KEMA approved CEL DP switch and BS88 fuse carrier/s3 Features CEL unique safety interlockEase of Installation:3 Unique slimline single module L13 L2, L3 and L4 modular options3 Optional pre-wired with D/I tails and bespoke units available3 Ready-fitted captive s/s screws for speed and ease of installation3 PVC or brass gland plate optionsL1L2L3L4Above products all shown in proportional sizesX6 extension box andbrass gland plate| 4 |
Switch Disconnector and Fuse CarrierCEL manufacture their switch disconnector and fuse carrier to thehighest specification. Notably, the switch has been certified at autilisation category of AC22A and, as such, is capable of switching ahigh inductive load.These products have been independently tested and carry the KEMA*approval and comply with the latest International Standards.The advantages for youManufactured for Quality:3 Certified at a utilisation category of AC22A3 KEMA* approvedDouble pole 32A switchdisconnectorProduct referenceBS88 fuse carrierL3/S2FComplianceUtilisation categoryRated voltageRated currentSuitable for isolationand on-loaddisconnectionComplianceRated voltageRated currentFuse link dimensionsCEL1232CEL1132Specialist IsolatorsCELsenseThe CELsense unit provides an energy saving solution thatswitches off the centre island bollard during the daytimehours with no additional photocells. Fitted to a standard L4enclosure it can replace the column isolator, providing twocircuits - lantern and sub-circuit. Simple to install, this unitoffers carbon footprint reduction.UMSUG coded - 94 0001 0002 100Dimensions (mm): 168H x 95W x 90DCELprotectA surge protection device fitted within a three moduleenclosure (L3). The unit can take a maximum surge of 10KAor nominal surges of 3KA. CELprotect can take multiple lowvalue surges before degradation occurs.The device is pluggable in order that it can be replaced afterdegradation. An indicator showsthe status of the unit. Pre-wiredwith D/I & Earth tails for ease andspeed of installation.Energy savingProtect your valuableelectronic and LEDdevices*KEMA International Testing & Certification Laboratory (www.KEMA.com)| 5 |
Page 1 and 2: CEL | Isolators | Helix Cut Outswww
Page 3: Extension BoxesX0 spreader box to f
Page 7 and 8: Festive Lighting ApplicationsThe CE

CEL | Isolators | Helix Cut Outs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?