CEL | Isolators | Helix Cut Outs

Switch Disconnector and Fuse CarrierCEL manufacture their switch disconnector and fuse carrier to thehighest specification. Notably, the switch has been certified at autilisation category of AC22A and, as such, is capable of switching ahigh inductive load.These products have been independently tested and carry the KEMA*approval and comply with the latest International Standards.The advantages for youManufactured for Quality:3 Certified at a utilisation category of AC22A3 KEMA* approvedDouble pole 32A switchdisconnectorProduct referenceBS88 fuse carrierL3/S2FComplianceUtilisation categoryRated voltageRated currentSuitable for isolationand on-loaddisconnectionComplianceRated voltageRated currentFuse link dimensionsCEL1232CEL1132Specialist IsolatorsCELsenseThe CELsense unit provides an energy saving solution thatswitches off the centre island bollard during the daytimehours with no additional photocells. Fitted to a standard L4enclosure it can replace the column isolator, providing twocircuits - lantern and sub-circuit. Simple to install, this unitoffers carbon footprint reduction.UMSUG coded - 94 0001 0002 100Dimensions (mm): 168H x 95W x 90DCELprotectA surge protection device fitted within a three moduleenclosure (L3). The unit can take a maximum surge of 10KAor nominal surges of 3KA. CELprotect can take multiple lowvalue surges before degradation occurs.The device is pluggable in order that it can be replaced afterdegradation. An indicator showsthe status of the unit. Pre-wiredwith D/I & Earth tails for ease andspeed of installation.Energy savingProtect your valuableelectronic and LEDdevices*KEMA International Testing & Certification Laboratory (www.KEMA.com)| 5 |