C.I.E – Carta di Identità Elettronica Functional Specification Version 2.0

More documents

Recommendations

Info

Value Symbol M Description3Bh TS Y1xxx1111 T0 YInitial Character:Direct convention (Z=1 and lsb first)Format Byte. Indicates the presence of interface characters andthe number of historical bytes:- TD1 has to be present- 15 Historical bytesXXhTA1TB1NGlobal Interface Characters. If present, they must be interpretedaccording to [1].TC1If present, TB1 MUST be set to 00 (no Vpp is needed)1xxx0001 TD1 YTD2 present.T=1 is the first offered protocolTA2XXhTB2NGlobal And Specific Interface Characters. If present, they mustbe interpreted according to [1]TC2TA3 present31h TD2 YTB3 presentT=1 is the first offered protocol10h to FEh TA3 Y IFSI: Initial IFSCHi nibble: 0h to 9hLow nibble: 0h to FhTB3 Y BWI, CWI00h H1 YStatus information shall be present at the end of the historicalbytes not as TLV object.6Bh H2 Y 11 bytes of Pre-Issuing DataXXh H3 Y0xxx xxxx H4 YPre-Issuing data byte 1:ICM – IC manufacturer, coded according to [1]Pre-Issuing data byte 2:ICT – mask manufacturer, coded according to Table 3CIE - Functional Specification v 2.0 -Page 18/76
XXh XXh H5/H6 Y02h H7 Y49h H8 Y54h H9 Y49h H10 Y44h H11 Y20h H12 Y20h H13 YPre-Issuing data byte 3/4:Operating System version, assigned by chip vendor.Pre-Issuing data byte 5:DD1: ATR coding version: Second versionPre-Issuing data byte 6:DD2: ‘I’Pre-Issuing data byte 7:DD3: ‘T’Pre-Issuing data byte 8:DD4: ‘I’Pre-Issuing data byte 9:DD5: ‘D’Pre-Issuing data byte 10:DD6: APDU specification version (2.0)Pre-Issuing data byte 11:DD7: C.I.E. File System version (2.0)31h H14 Y 1 byte of Card Services Data80h H15 YDirect Application Selection supportedNo Data Object AvailableXXh TCK Y Check character as specified in [1]Table 2: CIE ATR specificationCIE - Functional Specification v 2.0 -Page 19/76
Page 1 and 2: C.I.E. - Carta di Identità Elettro
Page 3 and 4: Table of Contents1. Revision Histor
Page 5 and 6: 12.17 GENERATE KEY PAIR ...........
Page 7 and 8: 2. IntroductionThis document is the
Page 9 and 10: 4. Reference Documents1. ISO/IEC 78
Page 11 and 12: Public Key - That key of an entity
Page 13 and 14: lsbLSBMACMFmsbMSBMSEMTSCOSOCIPINPPP
Page 15 and 16: 6. Electrical ParametersFor all ele
Page 17: 8. Answer To Reset (ATR)The Answer
Page 21 and 22: 9. Application SelectionNo explicit
Page 23 and 24: Record structure:The EF is seen at
Page 25 and 26: Linear Variable TLV or Cyclic EFSiz
Page 27 and 28: The card maintains an internal Secu
Page 29 and 30: BSO ID 1 01h to 1FhOPTION 1 See Tab
Page 31 and 32: RSA public key Exponent for Authent
Page 33 and 34: 11.4 Secure MessagingThe Secure Mes
Page 35 and 36: Byte Nr. SM Condition1 ENC USE IN2
Page 37 and 38: • Step 4: APDU command set up in
Page 39 and 40: 11.4.5 SM Response in SM_ENCOrigina
Page 41 and 42: 11.4.7 SM Response in SM_ENC_SIGOri
Page 43 and 44: 12. APDU ReferenceThe CIE supports
Page 45 and 46: 6A 86 Incorrect P1-P26A 87 Lc incon
Page 47 and 48: The PUT DATA - DATA_OCI acts on the
Page 49 and 50: 3DES - SM Cipher 10h 83h 03h3DES -
Page 51 and 52: 3 8Fh 6 BYTE 1: Not used - MUST be
Page 53 and 54: Table35Table 34: SELECT FILE Comman
Page 55 and 56: The operation is possible if the ac
Page 57 and 58: n has to be different from FFh.P1=0
Page 59 and 60: First and NextLast and PreviousSecu
Page 61 and 62: acktrackingallowed.b6 = 0b5 = 0b4 -
Page 63 and 64: 12.13 RESET RETRY COUNTERCLA INS P1
Page 65 and 66: 12.15 GIVE RANDOMCLA INS P1 P2 P3 D
Page 67 and 68: Security:The access condition to sa
Page 69 and 70:
The access condition to satisfy is
Page 71 and 72:
0X 04 00 00 LC = 00 EmptyTable 59:
Page 73 and 74:
• The length in bits of the priva
Page 75 and 76:
• a sequence of q cipher text blo
show all

C.I.E – Carta di Identità Elettronica Functional Specification Version 2.0

Create successful ePaper yourself

Delete template?

Save as template?