Milling and Drilling Tools for Composite and Honeycomb Materials

SOLID CARBIDE DRILL REAMER QUOTE REQUEST FORM1081 S. Northpoint Blvd. • Waukegan, Illinois 60085 • Phone (847) 362-1560 • Fax (800) 557-6720 • www.onsrud.comDrill Reamers are designed for single-pass drilling and reaming to achieve a final hole size with a one-step process. The tools are constructedwith four reamer margins which maximize hole roundness and are capable of holding size to a tighter tolerance than drilling alone. They aredesigned for use in Aluminum, Composite and Titanium.Usage: CP • Material: CompositesEND USER INFORMATIONDISTRIBUTOR INFORMATIONCompany __________________________________________________Contact __________________________________________________Address ______________________________________________________________________________________________________________________________________________________Distributor__________________________________________________Contact __________________________________________________Phone __________________________________________________Fax __________________________________________________Email __________________________________________________Phone __________________________________________________Fax __________________________________________________Email __________________________________________________TOOL DIMENSIONSSPECIAL TOLERANCESD1 ___________________________________D2 ___________________________________L1 ___________________________________L2 ___________________________________d ___________________________________OAL _____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Material(s) Cut________________________Hardness________________________Quantity Breaks________________________(Min. 6 pieces)Coating________________________www.onsrud.com 32