Milling and Drilling Tools for Composite and Honeycomb Materials
Milling and Drilling Tools for Composite and Honeycomb Materials
Milling and Drilling Tools for Composite and Honeycomb Materials
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LMT Onsrud Terms & ConditionsShipping - F.O.B. Waukegan, IL. All shipments ground unless otherwise specified.Claims – Any claims <strong>for</strong> shortage, damage or loss must be made within 30 days ofinvoice date. United Parcel Service is a preferred method of shipment because ofreliability <strong>and</strong> ease of tracing problem shipments.Guarantee - Our products are guaranteed against defects in material <strong>and</strong> quality ofmanufacture when used in the proper manner. If tools are returned <strong>and</strong> found to bedefective, we will repair or replace the tools. Continued tool breakage caused by impropertool usage without the knowledge of LMT Onsrud’s technical staff is not a condition<strong>for</strong> return <strong>and</strong> replacement of such tools.Errors - LMT Onsrud, LP cannot be held responsible <strong>for</strong> incorrect parts made with ourproducts due to mislabeling or defect.Return Goods Policy – No merch<strong>and</strong>ise can be returned without prior authorization.Credit will not be issued <strong>for</strong> merch<strong>and</strong>ise returned without a return authorization number.Product must be a current revision catalog item in new <strong>and</strong> saleable condition. All returnssubject to a 15% restocking fee or offsetting order of equal value.Specials - LMT Onsrud, LP has the right to over or under ship by 10% all specials.Special orders less than 10 pieces are subject to +/- 1 piece. Specials <strong>and</strong> modifiedtools are not returnable <strong>for</strong> credit. Specials cancelled will be assessed an in-processcharge based on the status of the order <strong>and</strong> expenses incurred at the time ofcancellation. If a special tool has been completed, the tool will be shipped <strong>and</strong> theprice quoted will be billed.Safety Precautions – Cutting tools should only be used to per<strong>for</strong>m operations that arecompatible with the original tool design. Safety glasses <strong>and</strong> other appropriate safetyequipment should be worn by all people in the vicinity of tool use.Prices & Terms - All prices <strong>and</strong> terms are subject to change without notice. All orders aresubject to acceptance at LMT Onsrud.