11.08.2015 Views

Operator's Manual Model BBC Biopsy Breast Array Coil for ... - Invivo

Operator's Manual Model BBC Biopsy Breast Array Coil for ... - Invivo

Operator's Manual Model BBC Biopsy Breast Array Coil for ... - Invivo

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

500117 Rev 12Head SupportPlace the Head Support Device at the head end of the <strong>Biopsy</strong> <strong>Breast</strong> <strong>Coil</strong>with the handle end of the Device away from the coil. Adjust the height of theHead Support <strong>for</strong> optimum patient com<strong>for</strong>t by pushing in the release button.Once desired position is reached, let release button out to lock Head Supportin place. Disposable face drapes are provided <strong>for</strong> use with the Head SupportDevice (as shown below). Face drapes have adhesive <strong>for</strong> secure positioning.Be sure to dispose of face drape after each use.Positioning thePatientPosition the patient prone, feet-first, centering the breasts in the apertures ofthe coil. Use the open lateral side of the coil to visually center the breasts inthe coil. The patient may rest their face on the Head Support, and the mirrorwill redirect their vision to see outside of the bore (towards the rear end of themagnet).Ensure that the patient does not <strong>for</strong>m a loopwith any body parts. For breast coils inparticular, patients are imaged lying pronewith both arms extended above the head(superman). Do not allow patients to touchany part of the right hand or arm to anypart of the left hand or arm. The loop<strong>for</strong>med by doing so could cause an RFburn at the point of contact. Use pads toensure the patient’s hands do not touchany metal features of the patient tableor cradle. Be sure to educate the patientaccordingly and check the patient’s positionimmediately be<strong>for</strong>e the scan.20 <strong>Invivo</strong> Corporation<strong>Model</strong> <strong>BBC</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!