SEGUNDA SALA

MASTER113High technology designand manufactureBeam with high strengthlinkage to headstockservice• Beam section 120 x 120. The beam is reinforced inthe area surrounding the 1st furrow for extra strengthand further supported by a tubular drawbar.All adjustments are simple and straight forward.One mechanical turnbuckle adjusts the combinedoffsetting/angling.This can be fitted with an optional hydraulic ramadjuster on the 4E/5 furrow model.Traction bolt leg protectionsavingsAbrupt breakage of the 16mm traction bolt following a force atthe plough point in excess of 3000kg avoids risk of too frequenta breakage.• The bolt A runs in the direction of the line of force contrary to theconventional scissor bolt method where the bolt runs across the line offorce.• Due to these “in-line” forces the bolt support B never deforms and neverbecomes rounded with use.• It is impossible for the bolt to become trapped inside following abreakage. Once a force in excess of 3000kg is met at the furrow pointthe bolt breaks along its length and simply falls away for quick and easyreplacement.• Even after many bolt breakages the plough bodies remain at an identicaldepth and perfectly in-line.AB6