Customer Expectations Document (CED)

Customer Expectations Document – Xerox ® Color C75 Press – Version 1.02, January-2013Optional Accessories17The following devices are available for the Xerox Color C75 Press:AccessoryHigh Capacity Feeder1 Tray Oversize HighCapacity Feeder2 Tray Oversize HighCapacity FeederInterface ModuleAdvanced FinisherDescription2,000 sheet capacity ( based on 80 g/m 2 centerline paper)2,000 Sheet* (up to 13x19.2/SRA3) capacity from 64-300 gsm (uncoated)and 106-300 gsm (coated).4,000 Sheet* (up to 13x19.2/SRA3) capacity from 64-300 gsm (uncoated)and 106-300 gsm (coated).The Interface Module aligns the paper paths of the engine and finisher,decurls paper exiting the printer, and allows communication between theengine and finishers.500 sheet top tray, 3,000 sheet stacker trayProfessional FinisherGBC Advanced PunchStandard Finisher500 sheet top tray, 1,500 sheet stacker tray, Up to 20 set booklet trayThe GBC AdvancedPunch is an inline die punch that utilizes modular diesets to enable a variety of hole-punch patterns in A4/8 ½ x 11 in (LTR) longedge-fedmedia.LTR die punch ships with 19-hole die setA4 die punch ships with 21-hole die setThe Standard Finisher includes a basic in-line punch, stapler, the stacker trayand top exit tray. It also includes a built-in decurler unit that corrects thecurl on paper output from the print engine, and a built-in interposer.Booklet Maker FinisherC/Z FolderSquareFold ® TrimmerHigh Capacity StackerForeign Interface KitConvenience StaplerThe Booklet Maker Finisher includes a basic in-line punch, stapler, thestacker tray and top exit tray, and a booklet unit capable of saddle staplingand bi fold. It also includes a built-in decurler unit that corrects the curl onpaper output from the print engine, and a built-in interposer that feedscover paper to finisher for saddle-staple operation.This optional unit can perform Z-fold, Engineering Z-Fold, and C-Fold. It canbe added to the Standard Finisher with or without the Booklet makeroption.Please refer to the table on pages 27-28 for additional detail on supportedfold types and applicable paper sizes.This optional device attaches the Standard Finisher with Booklet Maker(with or without the C-Z Folder). The SquareFold ® Trimmer flattens thespine of the booklet and trims the face of the booklet.Stack up to 5,000 sheets* offsetting output stack tray with movable cart tomove to off line finishing. Additional cart is available for customer to order.Enables the connection of external devices such as coin-operated devices.This will function in copy and print modes.Staple up to 50 sheets of 90 g/m 2 / 24 lb. media.*based on 80 gsm centerline paper17