Air intake guard grillesVers. 1 Vers. 2- Material: steel wire, plastic coatedaaØdØdebebAir intake guard grilles for backward curved <strong>centrifugal</strong> <strong>fans</strong> (according to EN ISO 13857)Part no.SizeVers.a b d e Strut pitch78128-2-40392501240 5,4 208 2,4 4 x 90°78129-2-40392801260 4,5 210 2,8 4 x 90°78130-2-40393101280 4,5 230 2,8 4 x 90°78131-2-403978132-2-403935540011325 4,5 250 2,8 4 x 90°345 4,5 310 2,8 4 x 90°The table has been changed with respectto the printed edition of the catalogue.78136-2-40394502425 8,5 350 3,8 3 x 120°78139-2-40395002445 8,5 410 3,8 3 x 120°78138-2-40396302600 8,5 490 3,8 3 x 120°subject to alterationsab- Material: PA plastic 6, fibreglass-reinforcedGuard grille for suction side for compact <strong>centrifugal</strong> modulesPart no.Sizeab13351-2-2929 13394,1 7,719051-2-2929 190 133,0 9,022051-2-2929 220 166,0 8,722551-2-2929 225 158,0 8,725051-2-2929 250 177,0 9,7subject to alterations160
CapacitorsaØM810 b7±1+535235+10-5cØ a + 3,5- Material: Plastic cap, aluminium cup- Designation: FPU or P2 according toI<strong>EC</strong> 252 (non-flammable, non-explosive,circuit-breaking)- Approval: VDE according to DIN EN 60252(VDE 0560/8)- Calculated life time:420 V; -25 to +85°C; 30,000 hrs; class A470 V; -25 to +85°C; 10,000 hrs; class B500 V; -25 to +85°C; 3,000 hrs; class CMKP motor capacitors FPU or P2 (with fuse)Part no. Capacity a b (max.) c (max.)02155-4-7320 1,5 μF 25,0 77,0 92,002156-4-7320 2,0 μF 25,0 77,0 92,002159-4-7320 2,5 μF 30,0 71,0 92,002179-4-7320 3,5 μF 30,0 75,0 82,002161-4-7320 4,0 μF 25-30 104,0 135,002162-4-7320 5,0 μF 25-30 104,0 113,002163-4-7320 6,0 μF 30,0 101,0 110,002165-4-7320 8,0 μF 30-35 102,0 111,090026-4-7320 14,0 μF 40,0 130,0 139,0subject to alterationsmax. 9 mm- Pull-off protector: The housing expandsby max. 9 mm. The protector responds to overloadby the generated excess pressure snappingoff the internal lead in a predetermined breakingpoint.- Mounting: c is the overall dimension of thecapacitor which has to be taken into accountwhen mounting the part. The capacitor design,however, depends on the manufacturer.The expansion (9 mm) is either added to dimensionb, or it is already integrated in thecapacitor.Ø aM810 b±10c- Material: Housing made of thermoplastic resin7 ±1- Connection line: Multi-leadPVC cable 0.5 mm 2 with brass lead tips- Approval: VDE according to DIN EN 60252(VDE 0560/8)- Calculated life time:400 V; -25 to +85°C; 30,000 hrs; class A450 V; -25 to +85°C; 10,000 hrs; class BMKP motor capacitors P0 (without fuse)Part no. Capacity a b (max.) c99832-4-7320 9,0 μF 35,0 70,0 100,0subject to alterations161