EC/AC centrifugal fans RadiCal

– Technical features: See electrical connections p. 163 ff.– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)– Cable exit: Variable– Protection class: I (if customer has provided connection for protective earth)– Product conforming to standards: EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forMass ofcentrifugal fanMass of centrifugalmodule withsupport basketCentrifugal fankgCentrifugal modulew. support basketkgR3G 220-RC05 -01 1,13 K3G 220-RC05 -01 2,03R3G 220-RD53 -01 1,53 K3G 220-RD53 -01 2,43R3G 220-RC05 -03 1,20 K3G 220-RC05 -03 2,10R3G 220-RG19 -01 1,40 K3G 220-RG19 -01 2,00R3G 220-RD53 -03 1,53 K3G 220-RD53 -03 2,43Curves:Speed-controlledp fs Pa0,8 1,62,43,2in H 2O800600400200q VCD44E41 10 100 200 300 400 500 600 70033200 400 600 800 1000 1200 m 3 /h3223 = ηmax.21cfmCCCCDDDDEEEE123412341234nrpm276527002580263530852935279029403540337032303310P edW79858585115115115115168168168168IA0,670,690,700,701,101,101,101,101,401,401,401,40L W AdB(A)716765667469667077737072Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protectionagainst accidental contact. Suction-side noise levels: L W A as per ISO 13347, L p A measured at 1 m distance to fan axis.The acoustic values given are only valid under the measurment conditions listed and may vary depending on the installationsituation. With any deviation to the standard setup, the specific values have to be checked and reviewed onceinstalled or fitted! For detailed information see page 172 ff.Drawingsp. 22 ff.Inlet nozzlep. 158Guard grillep. 160Electr. connectionp. 163 ff.21