EC/AC centrifugal fans RadiCal

– Technical features: See electrical connections p. 164 ff.– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Touch current: < 3,5 mA acc. to IEC 60990 (test circuit, illustration 4)– Cable exit: Variable– Protection class: I (if customer has provided connection for protective earth)– Product conforming to standards: EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forMass ofcentrifugal fanMass of centrifugalmodule withsupport basketCentrifugal fankgCentrifugal modulew. support basketkgR3G 250-RD17 -01 1,50 K3G 250-RD17 -01 2,28R3G 250-RE07 -05 1,91 K3G 250-RE07 -05 2,69R3G 250-RD17 -03 1,50 K3G 250-RD17 -03 2,28R3G 250-RE07 -07 1,91 K3G 250-RE07 -07 2,69Curves:Speed-controlledp fs Pa0,4 0,8 1,2 1,6 2,0 2,4in H 2O700600500400300200100q VCD440 100 200 300 400 500 600 700 8003200 400 600 800 1000 1200 14002313 = ηmax.21cfmm 3 /hCCCCDDDD12341234nrpm20501965195519902680256525102610P edW70808078145170170160IA0,600,680,700,651,151,401,401,30L W AdB(A)6966616676716773Air performance measured as per: ISO 5801, Installation category A, with ebm-papst inlet nozzle without protectionagainst accidental contact. Suction-side noise levels: L W A as per ISO 13347, L p A measured at 1 m distance to fan axis.The acoustic values given are only valid under the measurment conditions listed and may vary depending on the installationsituation. With any deviation to the standard setup, the specific values have to be checked and reviewed onceinstalled or fitted! For detailed information see page 172 ff.Drawingsp. 38 ff.Inlet nozzlep. 158Guard grillep. 160Electr. connectionp. 164 ff.37