Axial fans

Axial fansversion 07The engineer’s choice

Axial fansebm-papst's axial fans prove their reputation as space-saving wonders by moving air for hot or coldair exchange in a wide variety of devices and systems. Their outstanding features are their smallinstallation depth, low noise level and exceptional efficiency, and are particularly well suited for airflow through heat exchangers.Furthermore, in the EC version, they become intelligent "energy-saving wonders" for an extremelywide range of applications, primarily in ventilation, air-conditioning and refrigeration technology andthe automotive industry.One principle, countless optionsThe axial fan, the function of which is similar toa propeller, moves the air axially, parallel to therevolving motor shaft. The ebm-papst externalrotor motor is integrated directly into the axialimpeller, forming a compact axial fan unit. Theyare usually installed with wall rings in short orlong nozzles.The extensive ebm-papst product range offersthe right solution for each requirement and isclassified for a wide variety of applications:– S series with sickle-shaped blades for highair flow at medium pressure– K series with especially low noise level –ideally suited for refrigeration plantapplications– A series for high-pressure applicationsDesign according to requirementsEnergy efficiency, controllability and low-noiseperformance – and all this together withexternal rotor motors in AC and EC technology:ebm-papst axial fans are optimally matched tocustomer requirements.The EC technology (12 VDC to 110 VDC orline-voltage-powered 100 VAC to 480 VAC) withintegrated or external electronics enablesprecision open and closed-loop control withvery high efficiency. The following standardfeatures are available:tach output, error message, linear or PWMinput, temperature or flow rate-dependentcontrol systems or bus-connectable interface.is a registered trademark of ebm-papst Mulfingen GmbH & Co. KG2

General information 4– Company profile: ebm-papst– Our key to success– How to use this catalogue– How to find your ebm-papst product– How to order your ebm-papst productAC axial fans, AC diagonal fans 13GeneralinformationAC axial fansAC axial fans, S series 23AC axial fans, K series 131AC axialS seriesTable of contentAC axial fans, A series 157EC axial fans, EC diagonal fans 179AC axialK seriesEC axial fans, S series 185Square shaded-pole motors (Q-motor) 301AC axialA seriesEnergy-saving motors (ESM) 315EC-SYSTEMS 329– Options– Switch power supplies– External commutation electronics for rail technology– Temperature sensor / control module– Pressure control / selection module for 3 speeds– Interface converter / RS485 repeater– RS485 terminal box / hand-held control terminal– Speed setting– LISA control software / fan control software– HMS controllerEC axial fansEC axialS seriesQ-motorAccessories 361– Guard grilles, streamers– Wall rings– Connection leads– Accessories for Q-motors and ESM– Terminal boxes, capacitors– Speed setting– Motor protection switch– Star-delta switch / repair switchTechnology 391– Technical parameters & scope– Impellers– Motors– Control technologyDistributors, agencies and subsidiaries 430Technology Accessories EC-SYSTEMS ESM3Contacts

Company profile: ebm-papstThe entire scope of ventilation and drive technology: this is the world of ebm-papst. More than 9,800 people – inGermany and throughout the world – develop, produce and sell our motors and fans. Our global presence andour unique range of products based on a quality standard that surpasses every other have made us what we are:world market leader in motors and fans. Expertly knowing what our customers need and incessantly strivingto arrive at the perfect application solution for a wide variety of different industries is what determines our dailywork. Those who know us know the high standards we apply to our work and know our creed: to be as closeto our customers as possible and to simply be the best in terms of innovation and reliability.Our headquarters in Mulfingen4

AC axialS seriesAC axial fansGeneralinformationLeft:Our location in St. GeorgenRight:Our location in LandshutAC axialK seriesOur history – Our driveRooted in ebm, PAPST and mvl, the three leading innovators in thedevelopment and production of motors and fans, ebm-papst hasestablished itself as the world market leader. Now as ever, our legendaryinventive spirit shines through in products that set standards in manysegments of industry worldwide. We are proud to say that despite difficultcompetition, our performance has always been exemplary and outstanding– in business, in our personal relationship with our customers, and ofcourse with respect to technology and engineering. For decades, we havecontributed to the world of air technology and drive engineering withsmall revolutions and large milestones.To maintain this advantage in skills and knowledge to get maximumquality and thus the highest degree of customer satisfaction, ouremployees around the world put their passion and dedication to workfor you.Passionately involved in R&DOur catalogues just list the results of our incessant efforts in R&D:products of highest quality and reliability. After all, it is our passion toconstantly try something new and improve what we have. In doing so,we take advantage of the latest development methods and state-ofthe-arttechnology and invest quite heavily in R&D facilities. Best of all,though, we rely on excellently trained and skilled engineers andtechnicians to be at your service in R&D and Sales & Distribution.Producing and safeguarding high-quality products and servicesThis is our promise without any compromise. Whether produced in one ofour five factories in Germany or one of our eleven international productionsites, our products always have the same high level of quality. This qualitycontrol is something you can definitely rely on! And this across all levelsof production and throughout all processes: consulting customers, development,material selection through to picking certified, choice suppliersand on to the production of parts and final delivery. On top of this, ourproducts have to pass the most rigourous tests under all realistic operatingconditions: continuous stress test, salt spray test, vibration test, orprecision noise measuring, just to mention a few. And the product getsclearance for serial production only after all thedesired characteristics have been determined tobe just right.Environmental care is another priority withebm-papst. This is why we have developedour product line in EC technology, which makesfor very low power consumption. Due to ourmanufacturing philosophy, there is absolutefocus on environmental care in production,recycling, waste and waste water disposal.Global DomesticIn order to be specialist for customised solutionsthroughout the world, you need strong partners.Global Domestic – i.e. being present all over theworld and being a national company in eachindividual country – is how we have establishedourselves in all important markets on this globewith our successful subsidiaries. And so you willalways find ebm-papst close to home, speakingyour language, and knowing the demands ofyour markets. Besides, our worldwide productionalliance serves as a basis for competitivepricing. Our global services and logistic outlets,i.e. IT networking, safeguard short reactiontimes and just-in-time delivery.All our efforts are documented in a comprehensivequality management system, both for productsand services. Being certified as complyingwith the tough requirements of the internationalstandards DIN EN ISO 9001, ISO/TS 16949-2and of standard DIN EN ISO 14001 is just oneseal of approval we have received for ourunceasing efforts to provide only the bestquality products and services.AC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesTechnology5Contacts

Our key to successOur innovations and technologies keep on turning into new industrial standards. This competitive capability canonly be maintained by seeing ventilation as a whole: the interrelationship between, and thus the system of, motorengineering, aerodynamics, and electronics. These are our three core competencies, imminently connected andlinked in each of our products. And so we handle air intelligently and quietly and continue to set new standards indrive technology. Our system solutions form the main part of our product range by now. And they will be our mainkey to success.ProductionWinding machineMotor engineering, aerodynamics, electronicsOur drive is well known and famous with specialists: our external-rotormotor, which has made us world market leader – quietly, yet powerfully.Being versatile as to integration, it is ideally suited to the most diverseapplications. Based on this principle, we here at ebm-papst have developedthe widest range of fans and motor types in the world. And for hotor aggressive blower mediums, the internal-rotor motor is the perfectcomplement.Still, in drive engineering, certain applications simply require the internalrotormotor principle, and they are then realised with our motors specificallydeveloped for such cases. Take, for instance, the steering supportmotor in the automotive field developed as innovation in active steering.Be it axial or centrifugal fans, centrifugal blowers, compact fans ortangential blowers: we always design fan blades, impeller blades andducted housings with the specific application in mind. We strive tominimise noise and to optimise efficiency. This is the challenge thatwe have taken up and which we meet – working away powerfullyand quietly.Finally, intelligence will become the decisivefactor on all markets in future. After all, only inconnection with electronics can drive and airflow – as a system solution – have an optimaleffect in a product or application. Interfaces areavoided, and thus potential faults and failures.Setting new standards with EC technologyWherever intelligent air handling is required,where energy consumption needs to be reducedand performance has to be maximised, thereour EC motors are your reliable answer. They donot waste financial or natural resources.Instead, they boost high efficiency, continuouscontrollability via analogue or digital inputs,long and maintenance-free service life, androbustness.6

AC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axialS seriesAC axial fansGeneralinformationLeft: Endurance test roomCentre: ShakerRight: Measurement stationTop: Betz manometerLeft: Precision noise measurement labWithout any problems, the ebm-papst EC technology allows you to realisenetworked, bus-linked appliances, to integrate simple or complex controlsat low cost and to also realise time and again new, customised andcomplete solutions. Here, ebm-papst excels as competent developmentpartner, with our experience of more than 25 years and our excellentknow-how in R & D and production also being well documented in a fewhundred national and international patents. And there is also our abilityto listen intently, to pay good attention to our customers and theirdemands – in order to come up with new and pioneering ideas, such as:Technology Accessories EC-SYSTEMS ESM Q-motor– EC fan units for clean room technology.As the electronics are integrated and the unitis wired up completely and ready to plug in,there is no need for our customers to wastetime and money on laborious wiring work.– Sensitive EC sensor fans for the automotiveindustry providing optimal selection of theair-conditioning unit in the car and, combinedwith booster blowers, individual air-conditioningof each and every passenger seat.– EC gas blowers with commutation andcontrol electronics including a processor.They are developed in such a way as tomake the blower premix the required amountof air with the gas. Aerodynamics with theseblowers are adjusted in such a way as tomake these blowers ideal for use in verylimited space at high back pressure.7Contacts

How to use this catalogueThe ebm-papst catalogue combines a technical and a product-specific section.Technical section: General information on how to select and find ebm-papst products for your specificapplication is found in the chapters "Selection" (p. 10) and "Technical parameters" (p. 392).In case you require technical background information on ebm-papst product groups, simply turn tothe chapters "Impellers" (p. 396), "Motors" (p.410) and "Control technology" (p. 414).Product-specific section: The product-specific section is organised according to product diameters,lines, materials and/or design principles.HeadlineThe headline indicates which technology (AC or EC), which design(centrifugal, axial, etc.), and which line (e.g. S-Range) the product belongsto. Impeller diameter or other features are also indicated.Part designation / TypeR 2 E 190 -AO 26 -05 This key designates and identifies allebm-papst products and serves as123 4 5 6 7 part number:1) TypeA - axial fanS - axial fan with guard grilleW - axial fan with wall ringV - axial combinationR - centrifugal fan, single inletG - centrifugal blower, single inlet (with scroll housing)B - centrifugal fan, dual inletD - centrifugal blower, dual inlet (with scroll housing)K - centrifugal combinationM - motorP - pumps2) Number of poles (AC) / number of cores (EC)2-, 4-, 6-, 8- and 12-pole (Z = 12) / 1- and 3-core3) Motor typeD - 3-phase motorE - single-phase motor with operating capacitorG - EC motorS - shaded-pole motorQ - square shaded-pole motors4) Impeller diameter in mm5) Key for mechanical design6) Key for electrical design7) Key for mechanical variantsNominal dataTypeR4E 400R4E 400subject to alterations56Curves[Pa]6005004003002001000,5 1,0 1,5 2,0 2,5 [in H 2O]2MotorM4E 094-FAM4E 094-HA211500 2000 25000 500 1000 [CFM]Curve1000 2000 3000 4000ABA1Nominal voltageBAC centrifugal fansbackward curved, 3-D, Ø 400– Material: Impeller: Sheet aluminium, joined by tabsRotor: Coated in black– Number of blades: 6– Direction of rotation: Clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsFrequencyVAC Hz rpm W A µF/VDB °C p. 596 f.1~ 230 50 1355 375 1.75 8.0/400 -40 to +601~ 230 60 1480 540 2.40 8.0/400 -40 to +501~ 230 50 1370 480 2.40 10.0 /450 -40 to +801~ 230 60 1460 700 3.15 10.0 /450 -40 to +5550 HzSpeed/rpm (1)(1) Nominal data in operating point with maximum loadWhat a product page is made up of (reduced scale - 50%)[m 3 /h]60 HzMax. powerinput (1)Max. currentdraw (1)CapacitorPerm. amb. temp.n[rpm]Electr. connectionA2a)A2a)P 1[W]I[A]Lp A[dB(A)]A 1 1350 370 1.7564A 2 1380 331 1.58 65B 1 1370 469 2.37 66B 2 1390 430 2.17 688

AC axialK seriesAC axialS seriesAC axial fansGeneralinformationProduct description– Motor protection: Design with thermal overload protector– Cable exit: Diagonal– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CEGeneralinformationAC centrifugal,backwardAC centrifugal,forwardDepending on the product, information is provided here on the following:material, number of blades, direction of air flow, direction of rotation,system of protection, insulation class, mounting position, condensatedischarge holes, mode of operation, design, bearing, technical equipment,EMC, leakage current, motor protection, electrical connection, cable exit,protection class, capacitor, product conforming to standards, approvalsand options.AC axialA seriesEC axial fansCentrifugal fanR4E 400-AR05 -06 7.1 141.0 172.0 128.0 50.0 90.054476-2-4013R4E 400-AP17 -06Mass ofcentrifugal fankg8.8Dimensionsb c d e g164.0 193.0 148.0 70.0 113.0Inlet nozzle(long)54476-2-4013EC centrifugal,backwardEC centrifugal, backwardfor clean roomsNominal dataAC products (up to motor size 074) and EC products (DC-fed):Free-blowing or at minimal backpressureAC products (from motor size 094) and EC products (AC-fed):In operating point at maximum loadEC axialS series600Brass lead tipsØ100 -0,45c ± 1d ± 1egbØ124Ø268Ø404Ø 257290665022Ø 37045˚115 ±0,3M6Depth of screwmax. 12 mmEC centrifugal,forwardEC-SYSTEMSAccessoriesGraphic rendition of productsAll drawings represent the design principle and are not to scale.Dimensions are either given in the product drawing or, with varyingdimensions, in the table of dimensions given above the drawing.Q-motorESMMounting dimensionsØ7Inlet nozzlep. 550Guard grillep. 553Capacitorp. 560 f.5528Ø 115Ø100Electr. connectionsp. 596 f.57EC-SYSTEMSAccessoriesTechnologyTechnologyContactsIndication of relevant accessories and additional informationThe pages indicated at the bottom refer to the accessories, e.g. inletnozzles, guard grilles, wall rings, etc. for this particular product,as well as additional information (e. g. the connection diagram).Curves and operating pointsThe diagram gives air performance curves pertaining to the product.Refer to the operating point table to the right for information on speed,power consumption, current draw, sound level or sound pressure leveland overall efficiency of the impeller.9Contacts

How to select your ebm-papst productSolutions for ventilation offered by ebm-papstIn the field of ventilation, ebm-papst offers the perfect solution for a vast number of applications. Depending on motor,impeller and control technology, there is almost no limit to the number of possible combinations, thus making sure you canfind the best solution for your application.Criteria for selectionWhen selecting a fan for a specific application, these parameters play animportant role:– Air flow with given back pressure– Voltage supply, divided into DC and AC voltage (1~, 3~)– Noise generation– Efficiency– Available mounting spaceSelecting a fanThe following diagram shows the range of characteristic curves for themost important fan designs and serves as a helpful tool in preselectinga design on the basis of air flow and back pressure.Characteristic curves of the various designs[Pa]12001000axial fanscentrifugal fans, backward curvedcentrifugal blowers, single inletcentrifugal blowers, dual inletdiagonal fans800600400200200 500 10002000 5000 10000 20000 50000[m³/h]10

How to order your ebm-papst productAC axialS seriesGeneralinformationAC axial fansHave you found the suitable ebm-papst product and would like to order it now?In this case, simply contact your nearest ebm-papst sales office by E-mail, fax or phone.AC axialK seriesDon't know exactly which ebm-papst product you need to order?In this case, simply contact your nearest ebm-papst sales office byE-mail, fax or phone. Our specialists in ventilation and drive technologyare always there to help you find the best solution for your specificapplication.Using the questions provided in the checklist here as a guideline, you canmake sure your ebm-papst contact has all the necessary information tohandle your enquiry as efficiently and quickly as possible.Checklist– Part designation / type– Quantity needed– Field of application– Ambient conditions (humidity, temperature, climate)– Impeller diameter– Air flow– Back pressure– Voltage supplyAC axialA seriesEC axial fansHow your ebm-papst product is deliveredIn our order confirmation, you will find information on when, how andwhere to the delivery will be made.EC axialS seriesWe deliver:– Ex works (excluding packaging)– Via freight carrier (we also use postal services for shipmentsup to 30 kg)Q-motorAll the other details such as packaging, freight, insurance and customsduty will be settled with your ebm-papst contact prior to the time weissue our order confirmation.ESMIs there anything else you need to know about yourebm-papst product?In this case, simply contact your nearest ebm-papst sales office byE-mail, fax or phone. We have the answer to your problem and arealways glad to be able to be of assistance.Using the questions provided in the checklist here as a guideline, you canmake sure your ebm-papst contact has all the necessary information tohandle your enquiry as efficiently and quickly as possible.For your nearest sales office, please turn to page 430.EC-SYSTEMSAccessoriesTechnology11Contacts

AC axial fans, AC diagonal fansTechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialS seriesAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axial fansAC axial fans Ø 130 - Ø 250 14AC diagonal fans Ø 208 2013Contacts

AC axial fansØ 130– Material:Wall ring: Die-cast aluminium,coated in blackBlades: Sheet steel, coated in blackRotor: Open, coated in black– Number of blades: 7– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection:Cable length 330 mm, beginning at wall ring– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassElectr. connectionType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgp. 416 f.W2S130-AA25 -01 M2S 052-CA A1~ 115 50 325 2800 41 — — 49 80 -25 to +601~ 115 60 380 3250 38 — — 53 120 -25 to +801.1 B)W2S130-AA03 -01 M2S 052-CA A1~ 230 50 325 2800 45 — — 49 80 -25 to +501~ 230 60 380 3250 39 — — 53 120 -25 to +701.1 B)subject to alterationsBrass lead tips150±0.555±0.3CurvesØ4,35/Ø4,45-0.05Ø162 +0.1-0.3Ø172±0.56 5"V" ❯[Pa]160120800,2 0,4 0,6 [in H 2O]A400 50 100 150 200 [CFM]100 200 30050 Hz[m 3 /h]60 Hz14Guard grillep. 368Electr. connectionsp. 416 f.

AC axial fansØ 130– Material:Wall ring: Die-cast aluminium,coated in blackBlades: Sheet steel, coated in blackRotor: Open, coated in black– Number of blades: 5– Direction of air flow: "A", intake overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection:Cable length 330 mm, beginning at wall ring– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassElectr. connectionAC axialA seriesType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2S130-BM15 -01 M2S 052-CA B1~ 115 50 380 2700 47 — — 60 — -25 to +501~ 115 60 425 3050 46 — — 62 — -25 to +701.1 B)W2S130-BM03 -01 M2S 052-CA B1~ 230 50 380 2700 47 — — 60 — -25 to +501~ 230 60 425 3050 46 — — 62 — -25 to +701.1 B)subject to alterationsp. 416 f.EC axial fansBrass lead tips66EC axialS seriesCurves[Pa]120100806040200,1 0,2 0,3 0,4 [in H 2O]BØ4,45-0.05/Ø4,20+0.05162 +0.15-0.30172±0.5150±0.555±0.2❮ "A"Accessories EC-SYSTEMS ESM Q-motor0 50 100 150 200 250 [CFM]100 200 300 400[m 3 /h]Technology50 Hz60 HzGuard grillep. 368 f.Electr. connectionsp. 416 f.15Contacts

AC axial fansØ 142– Material:Wall ring: Die-cast aluminium,coated in blackBlades: Sheet steel, coated in blackRotor: Open, coated in black– Number of blades: 7– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 22– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection: Blade terminal2.8 x 0.5 mm (operating capacitorconnected)– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2E 142-BB05 -01 M2E 052-BA A1~ 115 50 330 2800 25 — — 52 — -25 to +551~ 115 60 390 3300 24 — — 57 — -25 to +700.9W2E 142-BB01 -01 M2E 052-BA A1~ 230 50 330 2800 25 — — 52 — -25 to +551~ 230 60 390 3300 24 — — 57 — -25 to +700.9subject to alterations172+0,58±0,1150+0,5CurvesØ4,2±0,1Ø152,5162±0,2Blade terminal 2.8 x 0.5 mm938+0,5"V" ❯11[Pa]200160120800,2 0,4 0,6 [in H 2O]A400 50 100 150200 [CFM]100 200 300 40050 Hz[m 3 /h]60 Hz16Guard grillep. 368 f.Connection leadp. 374

AC axial fansØ 143– Material:Wall ring: Die-cast aluminium,coated in blackBlades: Sheet steel, coated in blackRotor: Open, coated in black– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection: Blade terminal2.8 x 0.5 mm (operating capacitorconnected)– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassAC axialA seriesType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2E143 -AA15 -01 M2E 052-BF B1~ 115 50 375 2800 24 — — 55 — -25 to +701~ 115 60 440 3300 26 — — 60 — -25 to +701.0W2E143 -AA09 -01 M2E 052-BF B1~ 230 50 375 2800 24 — — 55 — -25 to +701~ 230 60 440 3300 26 — — 60 — -25 to +701.0subject to alterationsEC axial fans51±0,37,2 +0,1-0,3 7,2 +0,1-0,3171,5±0,4162EC axialS seriesCurves[Pa]200160120800,2 0,4 0,6 [in H 2O]B8,8165±0,4Ø4,6 / 4,75-0,4❮ "V" Blade terminal 2.8 x 0.5 mm96±186±125±176±1Accessories EC-SYSTEMS ESM Q-motor400 50 100 150 200 250 [CFM]100 200 300 40050 Hz[m 3 /h]60 HzTechnologyGuard grillep. 368 f.Connection leadp. 37417Contacts

AC axial fansØ 143– Material:Wall ring: Die-cast aluminium,coated in blackBlades: Sheet steel, coated in blackRotor: Open, coated in black– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection: Blade terminal2.8 x 0.5 mm (operating capacitorconnected)– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2E 143-AB15 -01 M2E 052-BF A1~ 115 50 420 2800 26 — — 54 — -25 to +601~ 115 60 500 3300 29 — — 58 — -25 to +751.0W2E 143-AB09 -01 M2E 052-BF A1~ 230 50 420 2800 26 — — 54 — -25 to +601~ 230 60 500 3300 29 — — 58 — -25 to +751.0subject to alterations51±0,37,2 +0,1-0,3 7,2 +0,1-0,3171,5±0,41628,8165±0,4Ø4,6 / 4,75-0,4❮ "V" Blade terminal 2.8 x 0.5 mm96±186±125±176±1Curves[Pa]200160120800,2 0,4 0,6 [in H 2O]A400 50 100 150 200 250 [CFM]100 200 300 40050 Hz[m 3 /h]60 Hz18Guard grillep. 368 f.Connection leadp. 374

AC axial fansØ 200– Material:Wall ring: Die-cast aluminiumBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection: Terminal strips(operating capacitor connected)– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC;B also GOSTGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassAC axialA seriesType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2E 200-HK86 -01 M2E 068-BF B1~ 115 50 925 2550 64 0.58 5.0 /220 59 100 -25 to +601~ 115 60 1030 2800 80 0.70 5.0 /220 61 120 -25 to +652.0W2E 200-HK38 -01 M2E 068-BF B1~ 230 50 925 2550 64 0.29 1.5 /400 59 100 -25 to +601~ 230 60 1030 2800 80 0.35 1.5 /400 61 120 -25 to +652.0W4S200-HK04 -01 M4S 068-BF C1~ 230 50 450 1370 30 0.21 — 40 50 -25 to +701~ 230 60 525 1590 26 0.18 — 44 50 -25 to +802.0subject to alterationsW2E 200-HK(1)Protruding capacitor72,680 ±0,3EC axial fansEC axialS series(1)ca. 2225Q-motorCurves12[Pa]160140120100806040200,2 0,4 0,6 [in H 2O]C0 100 200 300 400 500[CFM]200 400 600 800B50 Hz[m 3 /h]60 HzW4S 200-HK240260240260225Ø4,5 +0,2Ø 4,5 +0,21272,6PE N L4 "V" ❯80 ±0,3PE N L4 "V" ❯Technology Accessories EC-SYSTEMS ESMGuard grillep. 369Capacitorp. 382 f.19Contacts

AC diagonal fansØ 208– Material:Wall ring: Die-cast aluminiumBlades: Plastic PARotor: Coated in black– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 44– Insulation class: "F"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: A Without TOP,B TOP wired internally– Electrical connection: Terminal strips(operating capacitor connected)– Protection class: I– Product conforming to standards:EN 60335-1, B also CE– Approvals: VDE, CCC, GOSTNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2D208-BA02 -01 M2D 068-CF A3~ 400 Y 50 820 2740 60 0.15 — 67 135 -25 to +703~ 400 Y 60 920 3090 80 0.15 — 70 165 -25 to +702.8W2E 208-BA86 -01 M2E 068-CF B1~ 115 50 815 2750 67 0.70 6.0 /220 68 135 -25 to +721~ 115 60 925 3100 87 0.78 6.0 /220 70 165 -25 to +722.8W2E 208-BA20 -01 M2E 068-CF B1~ 230 50 815 2750 67 0.33 1.5 /450 68 135 -25 to +721~ 230 60 925 3100 87 0.39 1.5 /450 70 165 -25 to +722.8subject to alterationsn[rpm]P 1[W]Lp A[dB(A)]n[rpm]P 1[W]Lp A[dB(A)]260Ø240802,5+0,5AAAA123430902990296029908093969270696970BBBB12343100299029603020871001029770706970Curves+0,5Section C-CØ4,5CCØ4,590˚45˚Ø232"V" ❯[Pa]16014012010080600,2 0,4 0,6 [in H 2O]AB43210±0,310±0,3402010 100 200300 400 500[CFM]200 400 600 800[m 3 /h]50 Hz 60 Hz20Guard grillep. 367Capacitorp. 382 f.

AC axial fansØ 250– Material:Wall ring: Die-cast aluminiumBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 44– Insulation class: "F"– Mounting position: Any– Condensate discharges: None– Mode of operation:Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: TOP wired internally– Electrical connection: Terminal strips(operating capacitor connected)– Protection class: I– Product conforming to standards:EN 60335-1, CE– Approvals: VDE, UL, CSA, CCC, GOSTGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.MassAC axialA seriesType Motor VAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kgW2E 250-HL06 -01subject to alterationsM2E 068-CF1~ 230 50 1865 2550 127 0.56 4.0 /400 69 100 -25 to +60C1~ 230 60 1970 2700 180 0.79 4.0 /400 70 100 -25 to +452.0EC axial fans28072,680 ±0,3EC axialS seriesQ-motorCurves[Pa]140120100806040200,1 0,2 0,3 0,40,5 [in H 2O]0 200 400 600800 [CFM]400 800 1200 1600C[m 3 /h]29532012Ø5,4 +0,2PE N L4"V" ❯Technology Accessories EC-SYSTEMS ESM50 Hz60 HzGuard grillep. 369Capacitorp. 382 f.21Contacts

AC axial fans S seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialS seriesAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axial fansAC axial fans, S series Ø 200 - Ø 450 24AC axial fans, S series Ø 500 - Ø 910 7423Contacts

AC axial fansS series, Ø 200– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 9– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 200 (1) M2D 068-BF*2E 200 M2E 068-BF*4D 200 (1) M4D 068-BF*4S 200 M4S 068-BFABCD3~ 230/400 50 890 2600 68 0.29/0.17 — 65 140 -25 to +453~ 230/400 60 990 2900 70 0.23/0.13 — 68 140 -25 to +701~ 230 50 890 2600 64 0.30 1.5 /400 65 150 -25 to +701~ 230 60 990 2900 78 0.34 1.5 /400 68 150 -25 to +703~ 230/400 50 500 1440 20 0.12/0.07 — 43 70 -25 to +803~ 230/400 60 600 1690 20 0.10/0.06 — 47 90 -25 to +901~ 230 50 470 1370 30 0.21 — 42 50 -25 to +751~ 230 60 540 1580 27 0.19 — 46 50 -25 to +801.61.41.41.2C1)/C2)A1)C1)/C2)B)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]140120100806040200,1 0,2 0,30,4 0,5 [in H 2O]C212A1AACC12122540247014301420707421230.29/0.170.29/0.170.12/0.070.12/0.070 100 200 300 400 500[CFM]200 400 600 80050 Hz[m 3 /h]60 Hz24

– Motor protection: A C Without TOP, B D TOP wired internally– Cable exit: A C Lateral, B D variable– Protection class: I– Product conforming to standards: EN 60335-1, B D also CE– Approvals: B CCCAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle (1) for full nozzle for short nozzle"V" A2D 200-AH18 -01"A" A2D 200-AI18 -01"V" A2E 200-AH38 -01"A" A2E 200-AI38 -01"V" A4D 200-AH14 -01"A" A4D 200-AI14 -01"V" A4S 200-AH04 -01"A" A4S 200-AI04 -01W2D 200-CH18 -01W2D 200-CI18 -01W2E 200-CH38 -01W2E 200-CI38 -01W4D 200-CH14 -01W4D 200-CI14 -01W4S 200-CH04 -01W4S 200-CI04 -01S2D 200-BH18 -01S2D 200-BI18 -01S2E 200-BH38 -01S2E 200-BI38 -01S4D 200-BH14 -01S4D 200-BI14 -01S4S 200-BH04 -01S4S 200-BI04 -01(1) Increased noise levels in "V" direction of air flowS2D 200-AH18 -01S2D 200-AI18 -01S2E 200-AH38 -01S2E 200-AI38 -01S4D 200-AH14 -01S4D 200-AI14 -01S4S 200-AH04 -01S4S 200-AI04 -01AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]1601401201008060400,2 0,4 0,6 [in H 2O]D2B1BBDD12122555246513601350677031310.310.320.220.22ESMEC-SYSTEMSAccessories20210 100 200 300 400 500[CFM]200 400 600 80050 Hz[m 3 /h]60 HzTechnologyDrawingsp. 26 f.Guard grillep. 362 f.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.25Contacts

AC axial fansS series, Ø 200, drawings of directions of air flow "V" and "A"Without attachmentsType172Brass lead tips685Ø27 -0,1±5450 ±2039±362±3-2Ø92Ø1972758±0,2M490˚Depth of screwmax. 5 mmA2D 200-AH18 -01A2D 200-AI18 -01A2E 200-AH38 -01A2E 200-AI38 -01A4D 200-AH14 -01A4D 200-AI14 -01A4S 200-AH04 -01A4S 200-AI04 -01"V""A""V""A""V""A""V""A"❮ "V""A" ❯With full round nozzleType98051,25Ø200Ø280250715˚W2D 200-CH18 -01W2D 200-CI18 -01W2E 200-CH38 -01W2E 200-CI38 -01W4D 200-CH14 -01W4D 200-CI14 -01W4S 200-CH04 -01W4S 200-CI04 -01"V""A""V""A""V""A""V""A"6x60˚❮ "V""A" ❯With guard grille for full nozzleType3,94,5245S2D 200-BH18 -01S2D 200-BI18 -01S2E 200-BH38 -01S2E 200-BI38 -01S4D 200-BH14 -01S4D 200-BI14 -01S4S 200-BH04 -01S4S 200-BI04 -01"V""A""V""A""V""A""V""A"❮ "V""A" ❯26

With guard grille for short nozzle2313 ±57229260TypeS2D 200-AH18 -01S2D 200-AI18 -01S2E 200-AH38 -01S2E 200-AI38 -01S4D 200-AH14 -01S4D 200-AI14 -01S4S 200-AH04 -01S4S 200-AI04 -01"V""A""V""A""V""A""V""A"AC axialK seriesGeneralinformationAC axial fansAC axialS series463,9❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans27Contacts

AC axial fansS series, Ø 250– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 250 (1) M2D 068-CF*2E 250 M2E 068-CF*4D 250 (1) M4D 068-CF*4E 250 M4E 068-BF*4S 250 M4S 068-CFABCDE3~ 230/400 50 1830 2500 100 0.34/0.20 — 69 150 -25 to +653~ 230/400 60 1950 2650 140 0.40/0.23 — 70 150 -25 to +451~ 230 50 1820 2450 115 0.51 3.0 /400 69 120 -25 to +651~ 230 60 1970 2600 150 0.66 3.0 /400 71 85 -25 to +503~ 230/400 50 1010 1400 25 0.12/0.07 — 54 70 -25 to +853~ 230/400 60 1140 1580 32 0.12/0.07 — 57 70 -25 to +801~ 230 50 1010 1400 42 0.19 1.5 /400 54 80 -25 to +551~ 230 60 1200 1630 45 0.20 1.5 /400 58 100 -25 to +701~ 230 50 1000 1390 69 0.53 — 54 80 -25 to +501~ 230 60 1160 1600 63 0.45 — 58 80 -25 to +652.11.91.91.91.7C1)/C2)A1)C1)/C2)A1)B)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]140120100806040200,1 0,2 0,3 0,40,5 [in H 2O]ED212A1AADDEE121212245523101370136013701360106125434571730.34/0.200.38/0.220.200.200.530.530 200 400 600800 [CFM]400 800 1200 160050 Hz[m 3 /h]60 Hz28

– Motor protection: A C Without TOP, B D E TOP wired internally– Cable exit: A C E Lateral, B D variable– Protection class: I– Product conforming to standards: EN 60335-1, B D E also CE– Approvals: A B D CCC; D also GOSTAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle (1) for full nozzle for short nozzle"V" A2D 250-AH02 -01"A" A2D 250-AI02 -01"V" A2E 250-AL06 -01"A" A2E 250-AM06 -01"V" A4D 250-AH22 -01"A" A4D 250-AI22 -01"V" A4E 250-AH02 -01"A" A4E 250-AI02 -01"V" A4S 250-AH02 -01"A" A4S 250-AI02 -01W2D 250-CH02 -01W2D 250-CI02 -01W2E 250-CL06 -01W2E 250-CM06 -01W4D 250-CH22 -01W4D 250-CI22 -01W4E 250-CH02 -01W4E 250-CI02 -01W4S 250-CH02 -01W4S 250-CI02 -01S2D 250-BH02 -01S2D 250-BI02 -01S2E 250-BL06 -01S2E 250-BM06 -01S4D 250-BH22 -01S4D 250-BI22 -01S4E 250-BH02 -01S4E 250-BI02 -01S4S 250-BH02 -01S4S 250-BI02 -01S2D 250-AH02 -01S2D 250-AI02 -01S2E 250-AL06 -01S2E 250-AM06 -01S4D 250-AH22 -01S4D 250-AI22 -01S4E 250-AH02 -01S4E 250-AI02 -01S4S 250-AH02 -01S4S 250-AI02 -01AC axialA seriesEC axial fansEC axialS series(1) Increased noise levels in "V" direction of air flowCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]140120100806040200,1 0,2 0,3 0,40,5 [in H 2O]C210 200 400600 800 [CFM]400 800 1200 16002B1[m 3 /h]BBCC1212245522901375135011613227300.510.570.12/0.070.12/0.07Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 30 f.Guard grillep. 362 f.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.29Contacts

AC axial fansS series, Ø 250, drawings of directions of air flow "V" and "A"Without attachmentsTypeacBrass lead tips685450±20cØ27-0,1±5234±3-2Ø92Ø2512758M4±0,290˚Depth of screwmax. 5 mmA2D 250-AH02 -01A2D 250-AI02 -01A2E 250-AL06 -01A2E 250-AM06 -01A4D 250-AH22 -01A4D 250-AI22 -01A4E 250-AH02 -01A4E 250-AI02 -01A4S 250-AH02 -01A4S 250-AI02 -01"V""A""V""A""V""A""V""A""V""A"72.072.072.072.072.072.062.062.072.072.018.021.018.027.018.027.014.022.018.023.0a±3❮ "V""A" ❯With full round nozzleType98761,25Ø257Ø320295715˚W2D 250-CH02 -01W2D 250-CI02 -01W2E 250-CL06 -01W2E 250-CM06 -01W4D 250-CH22 -01W4D 250-CI22 -01W4E 250-CH02 -01W4E 250-CI02 -01W4S 250-CH02 -01W4S 250-CI02 -01"V""A""V""A""V""A""V""A""V""A"6x60˚❮ "V""A" ❯With guard grille for full nozzleTypehkk3,9h4,5290S2D 250-BH02 -01S2D 250-BI02 -01S2E 250-BL06 -01S2E 250-BM06 -01S4D 250-BH22 -01S4D 250-BI22 -01S4E 250-BH02 -01S4E 250-BI02 -01S4S 250-BH02 -01S4S 250-BI02 -01"V""A""V""A""V""A""V""A""V""A"5.005.005.005.005.0010.0010.0010.0010.0010.00❮ "V""A" ❯30

GeneralinformationWith guard grille for short nozzlevun2717300TypeS2D 250-AH02 -01S2D 250-AI02 -01S2E 250-AL06 -01S2E 250-AM06 -01S4D 250-AH22 -01S4D 250-AI22 -01S4E 250-AH02 -01S4E 250-AI02 -01S4S 250-AH02 -01S4S 250-AI02 -01"V""A""V""A""V""A""V""A""V""A"m50.045.050.045.050.045.050.045.050.045.0n5.005.005.005.005.00u14.017.014.023.014.023.010.018.014.019.0v34.034.034.034.034.034.024.024.034.034.0AC axial fansAC axialS seriesAC axialK seriesm3,9❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans31Contacts

AC axial fans 2-poleS series, Ø 300– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 300 (1) M2D 074-DF*2E 300 M2E 074-DFAB3~ 230/400 50 3130 2580 210 0.62/0.36 — 72 200 -25 to +553~ 230/400 60 3350 2750 300 0.83/0.48 — 73 125 -25 to +401~ 230 50 3410 2700 230 1.10 8.0 /400 73 200 -25 to +501~ 230 60 3740 3000 350 1.55 8.0 /400 76 50 -25 to +403.03.0C1)/C2)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]200160120800,2 0,4 0,6 [in H 2O]2A1AA12253024002282730.68/0.390.78/0.45400 500 1000 15002000 [CFM]1000 2000 3000[m 3 /h]50 Hz60 Hz32

– Motor protection: A Without TOP, B TOP wired internally– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, B also CE– Approvals: CCCAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A2D 300-AP02 -01A2D 300-AP02 -02"V" A2E 300-AP02 -01"A" A2E 300-AP02 -02W2D 300-CP02 -30W2D 300-CP02 -31W2E 300-CP02 -30W2E 300-CP02 -31S2D 300-BP02 -30S2D 300-BP02 -31S2E 300-BP02 -30S2E 300-BP02 -31S2D 300-AP02 -30S2D 300-AP02 -31S2E 300-AP02 -30S2E 300-AP02 -31EC axialS seriesAC axialK seriesAC axialA seriesGeneralinformationEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]200160120800,2 0,4 0,6 [in H 2O]21BBB12268025602522901.111.27ESMEC-SYSTEMSAccessories400 500 1000 1500 2000[CFM]1000 2000 300050 Hz[m 3 /h]60 HzTechnologyDrawingsp. 34 f.Guard grillep. 362 f.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.33Contacts

9AC axial fans 2-poleS series, Ø 300, drawings of directions of air flow "V" and "A"Without attachmentsType-30±3Brass lead tips50+38±3M4M6Depth of screwmax. 10 mmA2D 300-AP02 -01A2D 300-AP02 -02A2E 300-AP02 -01A2E 300-AP02 -02"V""A""V""A"685450±20Ø75Ø102Ø298 ±2374x90˚104 ±2 90±0,2❮ "V""A" ❯With full round nozzle8011TypeW2D 300-CP02 -30W2D 300-CP02 -31W2E 300-CP02 -30W2E 300-CP02 -31"V""A""V""A"380Ø326Ø39715˚0❮ "V""A" ❯6x60˚With guard grille for full nozzleType056,5S2D 300-BP02 -30S2D 300-BP02 -31S2E 300-BP02 -30S2E 300-BP02 -31"V""A""V""A"360❮ "V""A" ❯34

With guard grille for short nozzle05056,5TypeS2D 300-AP02 -30S2D 300-AP02 -31S2E 300-AP02 -30S2E 300-AP02 -31"V""A""V""A"AC axial fans324360AC axialS seriesAC axialK seriesGeneralinformation1854❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans35Contacts

AC axial fans 4-poleS series, Ø 300– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 300 (1) M4D 068-CF*4E 300 M4E 068-CFAB3~ 230/400 50 1860 1370 60 0.29/0.17 — 57 90 -25 to +453~ 230/400 60 2080 1540 75 0.26/0.15 — 60 60 -25 to +401~ 230 50 1740 1400 68 0.30 2.0 /400 59 80 -25 to +601~ 230 60 2040 1630 92 0.41 2.0 /400 63 70 -25 to +451.91.9C1)/C2)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]1008060400,1 0,2 0,3 [in H 2O]2A1AA121350126066880.29/0.170.33/0.19200 250 500 7501000 [CFM]500 1000 1500[m 3 /h]50 Hz60 Hz36

– Motor protection: A Without TOP, B TOP wired internally– Cable exit: A Axial, B variable– Protection class: I– Product conforming to standards: EN 60335-1, B also CE– Approvals: CCC; B also GOSTAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A4D 300-AP28 -01A4D 300-AP28 -02"V" A4E 300-AP26 -01"A" A4E 300-AP26 -02W4D 300-CP28 -30W4D 300-CP28 -31W4E 300-CP26 -30W4E 300-CP26 -31S4D 300-BP28 -30S4D 300-BP28 -31S4E 300-BP26 -30S4E 300-BP26 -31S4D 300-AP28 -30S4D 300-AP28 -31S4E 300-AP26 -30S4E 300-AP26 -31EC axialS seriesAC axialK seriesAC axialA seriesGeneralinformationEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]1008060400,1 0,2 0,3 [in H 2O]2B1BB121390129072880.320.39ESMEC-SYSTEMSAccessories200 250 500 7501000 [CFM]500 1000 150050 Hz[m 3 /h]60 HzTechnologyDrawingsp. 38 f.Guard grillep. 362 f.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.37Contacts

9AC axial fans 4-poleS series, Ø 300, drawings of directions of air flow "V" and "A"Without attachments- 0 +c±3 60±3Brass lead tips2M4M4Depth of screwmax. 5 mmTypeA4D 300-AP28 -01A4D 300-AP28 -02A4E 300-AP26 -01A4E 300-AP26 -02"V""A""V""A"c13.0-7.013.0-7.0685450 ±20Ø27Ø92Ø300-2274x90˚73±2 58±0,2❮ "V""A" ❯With full round nozzle8011TypeW4D 300-CP28 -30W4D 300-CP28 -31W4E 300-CP26 -30W4E 300-CP26 -31"V""A""V""A"k0.030.00.030.0380Ø326Ø39715˚k❮ "V""A" ❯6x60˚With guard grille for full nozzlek44,5TypeS4D 300-BP28 -30S4D 300-BP28 -31S4E 300-BP26 -30S4E 300-BP26 -31"V""A""V""A"k0.030.00.030.0360❮ "V""A" ❯38

With guard grille for short nozzlek5044,5TypeS4D 300-AP28 -30S4D 300-AP28 -31S4E 300-AP26 -30S4E 300-AP26 -31"V""A""V""A"k0.030.00.030.0u23.029.023.029.0v23.049.023.049.0AC axial fans329,5360AC axialS seriesAC axialK seriesGeneralinformationuv❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans39Contacts

AC axial fansS series, Ø 315– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 315 (1) M4D 068-DF*4E 315 M4E 068-DF*6E 315 M6E 068-DFABC3~ 230/400 50 2450 1400 85 0.45/0.26 — 60 120 -25 to +553~ 230/400 60 2810 1620 110 0.42/0.24 — 64 120 -25 to +551~ 230 50 2440 1410 102 0.52 4.0 /400 59 120 -25 to +551~ 230 60 2840 1650 120 0.53 4.0 /400 64 120 -25 to +551~ 230 50 1650 950 65 0.33 2.0 /400 51 70 -25 to +501~ 230 60 1950 1120 68 0.30 2.0 /450 55 80 -25 to +602.42.42.4C1)/C2)A1)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]120100806040200,1 0,2 0,30,4 [in H 2O]2A1AA1214001380901030.45/0.260.47/0.270 250 500 750 1000 1250 1500 [CFM]600 1200 1800 240050 Hz[m 3 /h]60 Hz40Drawingsp. 42 f.

– Motor protection: A Without TOP, B C TOP wired internally– Cable exit: Axial– Protection class: I– Product conforming to standards: EN 60335-1, B C also CE– Approvals: CCC; A also GOSTAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A4D 315-AP10 -01A4D 315-AP10 -02"V" A4E 315-AP18 -01"A" A4E 315-AP18 -02"V" A6E 315-AP02 -01"A" A6E 315-AP02 -02W4D 315-CP10 -30W4D 315-CP10 -31W4E 315-CP18 -30W4E 315-CP18 -31W6E 315-CP02 -30W6E 315-CP02 -31S4D 315-BP10 -30S4D 315-BP10 -31S4E 315-BP18 -30S4E 315-BP18 -31S6E 315-BP02 -30S6E 315-BP02 -31S4D 315-AP10 -30S4D 315-AP10 -31S4E 315-AP18 -30S4E 315-AP18 -31S6E 315-AP02 -30S6E 315-AP02 -31❮ "V"In-line duct fanW4D 315-IP10 -01—W4E 315-IP18 -01———EC axialS seriesAC axialK seriesGeneralinformationAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]120100806040200,1 0,2 0,3 0,4[in H 2O]2C2B1BBCC12121400138094593010812063660.540.570.330.33Accessories EC-SYSTEMS ESM0 250 500 750 1000 1250 1500 [CFM]1600 1200 1800 2400[m 3 /h]Technology50 Hz60 HzGuard grillep. 362 f.Streamerp. 371Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.41Contacts

2Ø279AC axial fansS series, Ø 315, drawings of directions of air flow "V" and "A"Without attachments- 0 +c±3 85Brass lead tipsM4M4Depth of screwmax. 5 mmTypeA4D 315-AP10 -01A4D 315-AP10 -02A4E 315-AP18 -01A4E 315-AP18 -02A6E 315-AP02 -01A6E 315-AP02 -02"V""A""V""A""V""A"c5.0-7.05.0-7.05.0-7.0685450 ±20Ø92Ø312 ±2274x90˚83❮ "V""A" ❯±2 58 ±0,2With full round nozzleType7411380W4D 315-CP10 -30W4D 315-CP10 -31W4E 315-CP18 -30W4E 315-CP18 -31W6E 315-CP02 -30W6E 315-CP02 -31"V""A""V""A""V""A"Ø347Ø39715˚33❮ "V""A" ❯6x60˚With guard grille for full nozzleType304,56,5S4D 315-BP10 -30S4D 315-BP10 -31S4E 315-BP18 -30S4E 315-BP18 -31S6E 315-BP02 -30S6E 315-BP02 -31"V""A""V""A""V""A"375❮ "V""A" ❯42

50With guard grille for short nozzle30804,56,5TypeS4D 315-AP10 -30S4D 315-AP10 -31S4E 315-AP18 -30S4E 315-AP18 -31S6E 315-AP02 -30S6E 315-AP02 -31"V""A""V""A""V""A"336,5375AC axial fansAC axialK seriesGeneralinformationu40.028.040.028.040.028.0AC axialS seriesu33❮ "V""A" ❯AC axialA seriesIn-line duct fan99TypeW4D 315-IP10 -01W4E 315-IP18 -01"V""V"EC axial fans8x45˚Q-motorTechnologyAccessoriesEC-SYSTEMSESMØ316,5Ø382EC axialS series135Ø3568xØ9,5❮ "V"43Contacts

AC axial fansS series, Ø 330– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 330 (1) M4D 068-DF*4E 330 M4E 068-DF*6E 330 M6E 068-DFABC3~ 230/400 50 2800 1390 100 0.45/0.26 — 59 120 -25 to +553~ 230/400 60 3180 1570 130 0.42/0.24 — 63 120 -25 to +451~ 230 50 2830 1390 120 0.57 4.0 /400 63 90 -25 to +501~ 230 60 3230 1600 140 0.60 4.0 /400 67 75 -25 to +401~ 230 50 1940 940 65 0.33 2.0 /400 49 60 -25 to +501~ 230 60 2280 1100 72 0.32 2.0 /450 53 70 -25 to +652.62.52.5C1)/C2)A1)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]120100806040200,1 0,2 0,3 0,40,5 [in H 2O]2A1AA12137013251021260.45/0.260.48/0.280 500 1000 1500 [CFM]500 1000 1500 2000 2500 3000 [m 3 /h]50 Hz 60 Hz44

– Motor protection: A Without TOP, B C TOP wired internally– Cable exit: Axial– Protection class: I– Product conforming to standards: EN 60335-1, B C also CE– Approvals: B C CCCAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A4D 330-AP10 -01A4D 330-AP10 -02"V" A4E 330-AP18 -01"A" A4E 330-AP18 -02"V" A6E 330-AP02 -01"A" A6E 330-AP02 -02W4D 330-CP10 -30W4D 330-CP10 -31W4E 330-CP18 -30W4E 330-CP18 -31W6E 330-CP02 -30W6E 330-CP02 -31S4D 330-BP10 -30S4D 330-BP10 -31S4E 330-BP18 -30S4E 330-BP18 -31S6E 330-BP02 -30S6E 330-BP02 -31S4D 330-AP10 -30S4D 330-AP10 -31S4E 330-AP18 -30S4E 330-AP18 -31S6E 330-AP02 -30S6E 330-AP02 -31EC axialS seriesAC axialK seriesGeneralinformationAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]120100806040200,1 0,2 0,3 0,40,5 [in H 2O]2C10 500 1000 1500 [CFM]500 1000 1500 2000 2500 30002B1[m 3 /h]BBCC12121375132592591012214068700.580.640.340.35Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 46 f.Guard grillep. 362 f.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.45Contacts

9AC axial fansS series, Ø 330, drawings of directions of air flow "V" and "A"Without attachments- 0 +c±387Brass lead tips2M4M4Depth of screwmax. 5 mmTypeA4D 330-AP10 -01A4D 330-AP10 -02A4E 330-AP18 -01A4E 330-AP18 -02A6E 330-AP02 -01A6E 330-AP02 -02"V""A""V""A""V""A"c6.0-8.06.0-8.06.0-8.0685450 ±20Ø27Ø92Ø330 ±2274x90˚83 ±258 ±0,2❮ "V""A" ❯With full round nozzleType8011404W4D 330-CP10 -30W4D 330-CP10 -31W4E 330-CP18 -30W4E 330-CP18 -31W6E 330-CP02 -30W6E 330-CP02 -31"V""A""V""A""V""A"Ø369Ø44015˚30❮ "V""A" ❯6x60˚With guard grille for full nozzleType304,56,5S4D 330-BP10 -30S4D 330-BP10 -31S4E 330-BP18 -30S4E 330-BP18 -31S6E 330-BP02 -30S6E 330-BP02 -31"V""A""V""A""V""A"410❮ "V""A" ❯46

With guard grille for short nozzle30804,56,5TypeS4D 330-AP10 -30S4D 330-AP10 -31S4E 330-AP18 -30S4E 330-AP18 -31S6E 330-AP02 -30S6E 330-AP02 -31"V""A""V""A""V""A"354,5410AC axialK seriesGeneralinformationu43.029.043.029.043.029.0AC axial fansAC axialS seriesu33❮ "V""A" ❯TechnologyAC axialA seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans47Contacts

AC axial fansS series, Ø 350– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: A C "B", B "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 350 (1) M4D 068-EC*4E 350 M4E 068-EC*6E 350 M6E 068-DFABC3~ 230/400 50 3340 1420 135 0.73/0.42 — 64 120 -25 to +603~ 230/400 60 3815 1620 185 0.64/0.37 — 68 145 -25 to +451~ 230 50 3250 1365 132 0.58 5.0 /400 64 90 -25 to +601~ 230 60 3640 1530 180 0.80 5.0 /400 67 65 -25 to +501~ 230 50 2110 905 60 0.27 2.5 /400 55 40 -25 to +601~ 230 60 2420 1040 85 0.38 2.5 /400 58 45 -25 to +553.63.63.6C1)/C2)A1)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]160120800,2 0,40,6 [in H 2O]2AAA12140013801501730.75/0.430.75/0.434010 500 1000 1500 2000 [CFM]1000 2000 300050 Hz[m 3 /h]60 Hz48Drawingsp. 50 f.

– Motor protection: A Without TOP, B C TOP wired internally– Cable exit: A Lateral, B C axial– Protection class: I– Product conforming to standards: EN 60335-1, B C also CEAC axialK seriesAC axialS seriesGeneralinformationAC axial fansDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A4D 350-AR06 -01A4D 350-AR06 -02"V" A4E 350-AR06 -01"A" A4E 350-AR06 -02"V" A6E 350-AR08 -01"A" A6E 350-AR08 -02W4D 350-CR06 -30W4D 350-CR06 -31W4E 350-CR06 -30W4E 350-CR06 -31W6E 350-CR08 -30W6E 350-CR08 -31S4D 350-BR06 -30S4D 350-BR06 -31S4E 350-BR06 -30S4E 350-BR06 -31S6E 350-BR08 -30S6E 350-BR08 -31S4D 350-AR06 -30S4D 350-AR06 -31S4E 350-AR06 -30S4E 350-AR06 -31S6E 350-AR08 -30S6E 350-AR08 -31❮ "V"In-line duct fanW4D 350-IR06 -01—W4E 350-IR06 -01———AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]1008060400,1 0,20,3 0,4 [in H 2O]2C2B1BBCC12121335126088082514216663680.630.740.280.30ESMEC-SYSTEMSAccessories2010 500 1000 15002000 [CFM]1000 2000 300050 Hz[m 3 /h]60 HzTechnologyGuard grillep. 362 f.Streamerp. 371Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.49Contacts

9AC axial fansS series, Ø 350, drawings of directions of air flow "V" and "A"Without attachmentsTypeac-c±3Brass lead tips20 +92±3M4M4Depth of screwmax. 5 mmA4D 350-AR06 -01A4D 350-AR06 -02A4E 350-AR06 -01A4E 350-AR06 -02A6E 350-AR08 -01A6E 350-AR08 -02"V""A""V""A""V""A"102.0102.0102.0102.083.083.010.0-10.010.0-10.05.0-12.0685600 ±20Ø27Ø92Ø352 ±2274x90˚a ±258±0,2❮ "V""A" ❯With full round nozzleType8012442W4D 350-CR06 -30W4D 350-CR06 -31W4E 350-CR06 -30W4E 350-CR06 -31W6E 350-CR08 -30W6E 350-CR08 -31"V""A""V""A""V""A"Ø390Ø46015˚30❮ "V""A" ❯6x60˚With guard grille for full nozzleType304,5 6,5S4D 350-BR06 -30S4D 350-BR06 -31S4E 350-BR06 -30S4E 350-BR06 -31S6E 350-BR08 -30S6E 350-BR08 -31"V""A""V""A""V""A"422❮ "V""A" ❯50

508x45˚With guard grille for short nozzle804,5306,5TypeS4D 350-AR06 -30S4D 350-AR06 -31S4E 350-AR06 -30S4E 350-AR06 -31S6E 350-AR08 -30S6E 350-AR08 -31"V""A""V""A""V""A"374422AC axialK seriesGeneralinformationu52.032.052.032.047.030.0v52.052.052.052.033.033.0AC axial fansAC axialS seriesuv❮ "V""A" ❯AC axialA seriesIn-line duct fan99TypeW4D 350-IR06 -01W4E 350-IR06 -01"V""V"EC axial fansQ-motorTechnologyAccessoriesEC-SYSTEMSESMØ358Ø421EC axialS series135Ø3958xØ9,5❮ "V"51Contacts

AC axial fansS series, Ø 400– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: A B "B", C "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 400 (1)(2) M4D 074-EI*4E 400 M4E 074-EI*6E 400 M6E 074-DFABC3~ 230/400 50 4000 1450 135 0.76/0.44 — 68 150 -25 to +403~ 230/400 60 4610 1690 185 0.68/0.39 — 72 120 -25 to +401~ 230 50 4235 1430 160 0.73 6.0 /400 69 150 -25 to +401~ 230 60 4950 1700 240 1.06 6.0 /400 73 75 -25 to +401~ 230 50 3290 940 120 0.55 3.0 /450 59 50 -25 to +401~ 230 60 3780 1080 170 0.75 3.0 /400 62 40 -25 to +604.24.24.0C1)/C2)A1)A1)subject to alterations(1) 400 VAC ∆/Y for two speed steps available on request (2) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]160120800,2 0,40,6 [in H 2O]2AAA12144014151521950.82/0.470.86/0.504010 500 1000 1500 2000 2500 [CFM]1000 2000 3000 400050 Hz[m 3 /h]60 Hz52Drawingsp. 54 f.

– Motor protection: A Without TOP, B C TOP wired internally– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, B C also CE– Approvals: CCC– Options: Terminal boxAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A4D 400-AP12 -01A4D 400-AP12 -02"V" A4E 400-AP02 -01"A" A4E 400-AP02 -02"V" A6E 400-AP10 -01"A" A6E 400-AP10 -02W4D 400-CP12 -30W4D 400-CP12 -31W4E 400-CP02 -30W4E 400-CP02 -31W6E 400-CP10 -30W6E 400-CP10 -31S4D 400-BP12 -30S4D 400-BP12 -31S4E 400-BP02 -30S4E 400-BP02 -31S6E 400-BP10 -30S6E 400-BP10 -31S4D 400-AP12 -03S4D 400-AP12 -04S4E 400-AP02 -03S4E 400-AP02 -04S6E 400-AP10 -30S6E 400-AP10 -31❮ "V"In-line duct fanW4D 400-IP12 -01—W4E 400-IP02 -01———AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]16012080400,2 0,4 0,6 [in H 2O]22BBBCC1212143013959358951722101261400.780.930.570.62ESMEC-SYSTEMSAccessoriesC0 500 1000 1500 2000 2500 [CFM]1000 2000 3000 40001150 Hz[m 3 /h]60 HzTechnologyGuard grillep. 362 ff.Streamerp. 371Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.53Contacts

9AC axial fansS series, Ø 400, drawings of directions of air flow "V" and "A"Without attachmentsBrass lead tips5- 0 +c±3 p±3M4M6Depth of screwmax. 10 mmTypeA4D 400-AP12 -01A4D 400-AP12 -02A4E 400-AP02 -01A4E 400-AP02 -02A6E 400-AP10 -01A6E 400-AP10 -02"V""A""V""A""V""A"a c p117.0 26.0 68.0117.0 22.0 68.0117.0 26.0 68.0117.0 22.0 68.0104.0 -5.0 90.0104.0 14.0 88.0685600 ±20Ø75Ø102Ø392 ±2374x90˚a ±290 ±0,2❮ "V""A" ❯With full round nozzleType9612504W4D 400-CP12 -30W4D 400-CP12 -31W4E 400-CP02 -30W4E 400-CP02 -31W6E 400-CP10 -30W6E 400-CP10 -31"V""A""V""A""V""A"Ø419Ø52815˚30❮ "V""A" ❯6x60˚With guard grille for full nozzleType3059S4D 400-BP12 -30S4D 400-BP12 -31S4E 400-BP02 -30S4E 400-BP02 -31S6E 400-BP10 -30S6E 400-BP10 -31"V""A""V""A""V""A"502❮ "V""A" ❯54

50With guard grille for short nozzlek805 9TypeS4D 400-AP12 -03S4D 400-AP12 -04S4E 400-AP02 -03S4E 400-AP02 -04S6E 400-AP10 -30S6E 400-AP10 -31"V""A""V""A""V""A"f420.0420.0420.0420.0414.0414.0k10.010.010.010.030.030.0u24.020.024.020.035.052.0v47.047.047.047.054.054.0AC axial fansAC axialS seriesf470AC axialK seriesGeneralinformationuv❮ "V""A" ❯AC axialA seriesIn-line duct fan9912x30˚TypeW4D 400-IP12 -01W4E 400-IP02 -01"V""V"EC axial fansTechnologyQ-motorAccessoriesEC-SYSTEMSESMØ400Ø466EC axialS series155Ø43812xØ9,5❮ "V"55Contacts

AC axial fansS series, Ø 420– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Plastic, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A µF/VDB Pa °C kgp. 416 f.*4D 420 M4D 094-EA*4E 420 M4E 094-EAABCDE3~ 400 ∆ 50 1360 260 0.52 — 95 -40 to +603~ 400 Y 50 1060 185 0.31 — 60 -40 to +603~ 400 ∆ 60 1490 385 0.65 — 110 -40 to +603~ 400 Y 60 970 220 0.37 — 47 -40 to +601~ 230 50 1360 280 1.25 7.0 /400 95 -40 to +601~ 230 60 1520 385 1.68 7.0 /400 100 -40 to +605.85.85.8F1b)/F2b)F1b)/F2b)A2b)subject to alterations(1) Nominal data in operating point with maximum loadCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)][Pa][in H 2O]AA12138013602252600.470.526765120BB12112010601701850.290.316158100806040200,1 0,2 0,3 0,42D2B1A1C0 1000 2000 3000 [CFM]1000 2000 3000 4000 500050 Hz[m 3 /h]60 Hz56

– Motor protection: A - D Design with thermal overload protector, E TOP wired internally– Cable exit: Lateral via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CEAC axial fansDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V" A4D 420-AU02 -01"A" A4D 420-AU02 -02"V" A4E 420-AU03 -01"A" A4E 420-AU03 -02W4D 420-CU02 -30W4D 420-CU02 -31W4E 420-CU03 -30W4E 420-CU03 -31S4D 420-BU02 -30S4D 420-BU02 -31S4E 420-BU03 -30S4E 420-BU03 -31S4D 420-AU02 -03S4D 420-AU02 -04S4E 420-AU03 -03S4E 420-AU03 -04EC axialS seriesAC axialK seriesAC axialS seriesAC axialA seriesGeneralinformationEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)]Q-motor[Pa]120[in H 2O]EE12139013602472801.131.256765ESM100806040200,1 0,2 0,3 0,42E1EC-SYSTEMSAccessories0 1000 2000 3000 [CFM]1000 2000 3000 4000 5000 [m 3 /h]Technology50 Hz60 HzDrawingsp. 58 f.Guard grillep. 362 f.Wall ringp. 372 f.Capacitorp. 382 f.Electr. connectionsp. 416 f.57Contacts

AC axial fansS series, Ø 420, drawings of directions of air flow "V" and "A"Without attachments75,5±2c 1 ±3112,5±2Depth of screwmax. 10 mm4xM6TypeA4D 420-AU02 -01A4D 420-AU02 -02A4E 420-AU03 -01A4E 420-AU03 -02"V""A""V""A"bØ 89Ø 8999x9999x99c 12.016.02.016.0h33.533.559.559.55,5hØ100bØ417±1Cable gland❮ "V""A" ❯115±0,3With full round nozzleType131±396±26x60˚9W4D 420-CU02 -30W4D 420-CU02 -31W4E 420-CU03 -30W4E 420-CU03 -31"V""A""V""A"Ø544±1Ø468±1Ø447±215˚52012❮ "V""A" ❯With guard grille for full nozzle35±1c 2 ±39TypeS4D 420-BU02 -30S4D 420-BU02 -31S4E 420-BU03 -30S4E 420-BU03 -31"V""A""V""A"c 277.591.577.591.5Ø468±1Ø502±35❮ "V""A" ❯58

With guard grille for short nozzle147,5±365±2 c 3 ±3 9TypeS4D 420-AU02 -03S4D 420-AU02 -04S4E 420-AU03 -03S4E 420-AU03 -04"V""A""V""A"c 347.561.547.561.5AC axial fansØ452Ø502±3AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans59Contacts

AC axial fans 6-poleS series, Ø 420 / 450– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*6E 420 M6E 074-EI*6E 450 M6E 074-GAAB1~ 230 50 3940 940 145 0.67 4.0 /450 60 90 -25 to +501~ 230 60 4570 1090 205 0.90 4.0 /450 63 80 -25 to +451~ 230 50 4725 940 165 0.80 4.0 /450 63 70 -25 to +401~ 230 60 5450 1070 225 0.98 4.0 /450 67 45 -25 to +404.45.0A1)A1)subject to alterationsCurvesn[rpm]P 1[W]I[A][Pa]160120800,2 0,40,6 [in H 2O]2AAA129308901551760.710.804010 1000 2000 3000 [CFM]1000 2000 3000 4000 500050 Hz[m 3 /h]60 Hz60

– Motor protection: TOP wired internally– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, CE– Approvals: CCC– Options: Terminal boxAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A6E 420-AP02 -01A6E 420-AP02 -02"V" A6E 450-AP02 -01"A" A6E 450-AP02 -02W6E 420-CP02 -30W6E 420-CP02 -31W6E 450-CP02 -01W6E 450-CP02 -02S6E 420-BP02 -30S6E 420-BP02 -31S6E 450-BP02 -01S6E 450-BP02 -02S6E 420-AP02 -30S6E 420-AP02 -31S6E 450-AP02 -01S6E 450-AP02 -02EC axialS seriesAC axialK seriesAC axialA seriesGeneralinformationEC axial fansCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]120100806040200,1 0,2 0,3 0,4[in H 2O]20 1000 2000 3000[CFM]1000 2000 3000 4000 5000 60001B[m 3 /h]BB129308701712000.820.94Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 62 f.Guard grillep. 362 ff.Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.61Contacts

sAC axial fansS series, Ø 420 / 450, drawings of directions of air flow "V" and "A"Without attachmentsTypea b c p- 0 +c ±3 p ±3Brass lead tips5M4M6Depth of screwmax. 10 mmA6E 420-AP02 -01A6E 420-AP02 -02A6E 450-AP02 -01A6E 450-AP02 -02"V""A""V""A"117.0117.0129.0129.0418.0418.0446.0446.02.021.010.025.089.089.092.092.0Ø75Ø102Øb ±2374x90˚600685±20a ±290 ±0,2❮ "V""A" ❯With full round nozzleTypes t u v w xuvW6E 420-CP02 -30W6E 420-CP02 -31W6E 450-CP02 -01W6E 450-CP02 -02"V""A""V""A"9.09.011.011.0520.0520.0578.0578.096.096.0100.0100.012.012.014.014.0447.0447.0465.0465.0544.0544.0607.0607.0tØwØx15˚30❮ "V""A" ❯6x60˚With guard grille for full nozzleTyper3059S6E 420-BP02 -30S6E 420-BP02 -31S6E 450-BP02 -01S6E 450-BP02 -02"V""A""V""A"502.0502.0522.0522.0r❮ "V""A" ❯62

With guard grille for short nozzle308059TypeS6E 420-AP02 -30S6E 420-AP02 -31S6E 450-AP02 -01S6E 450-AP02 -02"V""A""V""A"f452.0452.0476.0476.0r502.0502.0522.0522.0u41.060.052.067.0v67.067.079.079.0AC axialK seriesfAC axial fansrGeneralinformationAC axialS seriesuv❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans63Contacts

AC axial fansS series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Plastic, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A µF/VDB Pa °C kgp. 416 f.*4D 450 M4D 094-EA*4E 450 M4E 094-EAABCDE3~ 400 ∆ 50 1250 340 0.61 — 120 -40 to +603~ 400 Y 50 875 200 0.33 — 60 -40 to +603~ 400 ∆ 60 1360 415 0.70 — 85 -40 to +503~ 400 Y 60 860 205 0.35 — 35 -40 to +501~ 230 50 1300 350 1.55 8.0 /400 120 -40 to +551~ 230 60 1490 425 1.87 8.0 /400 50 -40 to +456.06.06.0F1b)/F2b)F1b)/F2b)A2b)subject to alterations(1) Nominal data in operating point with maximum loadCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)][Pa]120100806040200,1 0,2 0,3 0,4[in H 2O]2DB21A1CAABB1212130012509858752853401802000.540.610.300.33676459540 1000 2000 2000[CFM]1000 2000 3000 4000 5000 600050 Hz[m 3 /h]60 Hz64

– Motor protection: A - D Design with thermal overload protector, E TOP wired internally– Cable exit: Lateral via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CEAC axial fansDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V" A4D 450-AU01 -01"A" A4D 450-AU01 -02"V" A4E 450-AU03 -01"A" A4E 450-AU03 -02W4D 450-CU01 -01W4D 450-CU01 -02W4E 450-CU03 -01W4E 450-CU03 -02S4D 450-BU01 -01S4D 450-BU01 -02S4E 450-BU03 -01S4E 450-BU03 -02S4D 450-AU01 -01S4D 450-AU01 -02S4E 450-AU03 -01S4E 450-AU03 -02EC axialS seriesAC axialK seriesAC axialS seriesAC axialA seriesGeneralinformationEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)]Q-motor[Pa]120100806040200,1 0,2 0,3 0,4[in H 2O]21EEE12135013003103501.351.556865Accessories EC-SYSTEMS ESM0 1000 2000 3000[CFM]1000 2000 3000 4000 5000 6000[m 3 /h]Technology50 Hz60 HzDrawingsp. 66 f.Guard grillep. 362 f.Wall ringp. 372 f.Capacitorp. 382 f.Electr. connectionsp. 416 f.65Contacts

AC axial fansS series, Ø 450, drawings of directions of air flow "V" and "A"Without attachmentsTypebh76,5±2c 1 ±3112,5±2Depth of screwmax. 10 mm4xM6A4D 450-AU01 -01A4D 450-AU01 -02A4E 450-AU03 -01A4E 450-AU03 -02"V""A""V""A"Ø 89Ø 8999x9999x99c 16.020.06.020.033.533.559.559.55,5hØ100bØ445±1Cable gland❮ "V""A" ❯115±0,3With full round nozzleType146,5±3100±26x60˚9W4D 450-CU01 -01W4D 450-CU01 -02W4E 450-CU03 -01W4E 450-CU03 -02"V""A""V""A"Ø607±1Ø537±1Ø465±215˚57814❮ "V""A" ❯With guard grille for full nozzle46,5±1c 2 ±39TypeS4D 450-BU01 -01S4D 450-BU01 -02S4E 450-BU03 -01S4E 450-BU03 -02"V""A""V""A"c 260.574.560.574.5Ø537±1Ø560±36❮ "V""A" ❯66

GeneralinformationWith guard grille for short nozzle137±387,5±2 c 3 ±3 9TypeS4D 450-AU01 -01S4D 450-AU01 -02S4E 450-AU03 -01S4E 450-AU03 -02"V""A""V""A"c 319.533.519.533.5TechnologyAC axial fansAC axialS seriesAC axialA seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansØ472Ø522±3AC axialK series6❮ "V""A" ❯67Contacts

AC axial fansS series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A µF/VDB Pa °C kgp. 416 f.*4D 450 M4D 094-HA*4E 450 M4E 094-HAABCDE3~ 400 ∆ 50 1330 585 1.10 — 200 -40 to +703~ 400 Y 50 1000 390 0.67 — 110 -40 to +703~ 400 ∆ 60 1540 660 1.16 — 110 -40 to +503~ 400 Y 60 1060 400 0.70 — 55 -40 to +501~ 230 50 1350 480 2.10 10.0 /400 125 -40 to +651~ 230 60 1490 665 2.90 10.0 /400 115 -40 to +507.97.97.9F1b)/F2b)F1b)/F2b)A2b)subject to alterations(1) Nominal data in operating point with maximum loadCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)][Pa]200160120800,2 0,4 0,60,8 [in H 2O]2B2ACAABB121214001370117010303924763033750.890.980.530.637270686640D1 10 1000 2000 3000 4000 [CFM]2000 4000 6000[m 3 /h]50 Hz60 Hz68

– Motor protection: Design with thermal overload protector– Cable exit: Lateral via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CEAC axialK seriesAC axialS seriesAC axial fansGeneralinformationDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V" A4D 450-BA14 -01"A" A4D 450-BA14 -02"V" A4E 450-BA09 -01"A" A4E 450-BA09 -02W4D 450-GA14 -01W4D 450-GA14 -02W4E 450-GA09 -01W4E 450-GA09 -02S4D 450-HA14 -01S4D 450-HA14 -02S4E 450-HA09 -01S4E 450-HA09 -02S4D 450-GA14 -01S4D 450-GA14 -02S4E 450-GA09 -01S4E 450-GA09 -02❮ "V"In-line duct fan————AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)]Q-motor[Pa]200160120800,2 0,40,6 0,8 [in H 2O]2EEE12138013604134602.012.207270ESMEC-SYSTEMSAccessories4010 1000 2000 3000 4000 [CFM]2000 4000 600050 Hz[m 3 /h]60 HzTechnologyDrawingsp. 72 f.Guard grillep. 362 ff.Streamerp. 371Wall ringp. 372 f.Capacitorp. 382 f.Electr. connectionsp. 416 f.69Contacts

AC axial fansS series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Mass ofin-line duct fanElectr. connectionTypeMotorVAC Hz rpm W A µF/VDB Pa °C kgp. 416 f.*4D 450 M4D 110-EF*4E 450 M4E 110-EF0°0°ABC3~ 400 ∆ 50 1350 490 1.00 — 115 -40 to +953~ 400 Y 50 1075 340 0.58 — 75 -40 to +951~ 230 50 1330 500 2.20 10.0 /400 100 -40 to +8014.514.5F1b)/F2b)A2b)subject to alterations(1) Nominal data in operating point with maximum loadCurvesn[rpm]P 1[W]I[A]Lw A[dB(A)][Pa]120100806040200,1 0,2 0,3 0,4[in H 2O]3B231A21AAABBB1231231370136013501120109010754504704903203303400.970.991.000.560.570.587677797173750 1000 2000 30004000 [CFM]1000 2000 3000 4000 5000 6000 7000-10°-5°[m 3 /h]0°70

– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axialK seriesAC axial fansAC axialS seriesDirection of air flowGeneralinformation❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"——"V" —"A"—————————————❮ "V"In-line duct fanW4D 450-IG01 -01—W4E 450-IG01 -01—AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lw A[dB(A)]Q-motor[Pa]100806040200,1 0,2 0,3 0,4 [in H 2O]32C1CCC1231360134013304604805002.002.102.20767778ESMEC-SYSTEMSAccessories0 1000 2000 30004000 [CFM]1000 2000 3000 4000 5000 6000 7000-10°-5°[m 3 /h]0°TechnologyDrawingsp. 73Capacitorp. 382 f.Electr. connectionsp. 416 f.71Contacts

AC axial fansS series, Ø 450, drawings of directions of air flow "V" and "A"Without attachments- 0 +c±3 92±3115±0,2TypeA4D 450-BA14 -01A4D 450-BA14 -02A4E 450-BA09 -01A4E 450-BA09 -02"V""A""V""A"b c hØ 89 35.0 33.5Ø 89 36.7 33.599x99 35.0 59.599x99 36.7 59.55,5Ø100bØ446±2M6hCable gland148 ±2❮ "V""A" ❯Depth of screwmax. 12 mmWith full round nozzleType1001415°11W4D 450-GA14 -01W4D 450-GA14 -02W4E 450-GA09 -01W4E 450-GA09 -02"V""A""V""A"6x60°Ø465Ø60748,5❮ "V""A" ❯578With guard grille for full nozzleType39,569S4D 450-HA14 -01S4D 450-HA14 -02S4E 450-HA09 -01S4E 450-HA09 -02"V""A""V""A"17,5560❮ "V""A" ❯72

51With guard grille for short nozzle80,5617,59TypeS4D 450-GA14 -01S4D 450-GA14 -02S4E 450-GA09 -01S4E 450-GA09 -02"V""A""V""A"472515AC axial fansAC axialK seriesGeneralinformationu64.065.764.065.7AC axialS seriesu85❮ "V""A" ❯AC axialA seriesIn-line duct fan9912x30˚TypeW4D 450-IG01 -01W4E 450-IG01 -01"V""V"EC axial fansQ-motorTechnologyAccessoriesEC-SYSTEMSESMØ451Ø515EC axialS series160Ø48712xØ9,5❮ "V"73Contacts

AC axial fansS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4D 500 M4D 110-EF -10°*4D 500 M4D 110-GF 0°*4D 500 M4D 110-GF -5°subject to alterationsABCDEF3~ 400 ∆ 50 1310 0.58 1.10 — 155 -40 to +853~ 400 Y 50 1010 0.38 0.65 — 95 -40 to +853~ 400 ∆ 50 1325 0.82 1.59 — 160 -40 to +803~ 400 Y 50 1035 0.55 0.95 — 100 -40 to +803~ 400 ∆ 50 1360 0.69 1.43 — 160 -40 to +903~ 400 Y 50 1110 0.49 0.86 — 105 -40 to +90(1) Nominal data in operating point 3 with maximum loadF1b)/F2b)F1b)/F2b)F1b)/F2b)Curvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H2O]1601401201008060400,2 0,4 0,63B3333 3A22 22F122E11111CAAABBBCCCDDDEEE1231231231231231355134013101110107010101355134513251100107010351390138013600.460.500.580.330.340.380.700.750.820.500.520.550.570.620.690.971.011.100.560.600.651.391.441.590.840.870.951.231.291.4376788072737477788073727476778020DFFF1231180115011100.430.460.490.720.770.867373760 1250 2500375050002000 4000 6000 8000-10˚-5˚[CFM][m 3 /h]0˚74

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flowAC axialK series❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V""A"A4D 500-AI01A4D 500-AI01-01-02"V" A4D 500-AD03 -01"A" A4D 500-AD03 -02"V" A4D 500-AE03 -01"A" A4D 500-AE03 -02W4D 500-GI01 -01W4D 500-DI01 -02W4D 500-GD03 -01W4D 500-DD03 -02W4D 500-GE03 -01W4D 500-DE03 -02S4D 500-CI01 -01—S4D 500-CD03 -01—S4D 500-CE03 -01—S4D 500-AI01 -01—S4D 500-AD03 -01—S4D 500-AE03 -01——S4D 500-BI01 -02—S4D 500-BD03 -02—S4D 500-BE03 -02—S4D 500-AI01 -02—S4D 500-AD03 -02—S4D 500-AE03 -02——W4D 500-ID03 -01———AC axialA seriesEC axial fansTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesDrawingsp. 82 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.75Contacts

AC axial fansS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6D 500 M6D 110-EF*6D 500 M6D 110-EF*6D 500 M6D 110-EF0°-5°-10°ABCDE3~ 400 ∆ 50 920 0.32 0.75 — 75 -40 to +753~ 400 Y 50 765 0.23 0.40 — 50 -40 to +753~ 400 ∆ 50 945 0.29 0.74 — 80 -40 to +803~ 400 Y 50 790 0.20 0.36 — 60 -40 to +803~ 400 ∆ 50 950 0.23 0.69 — 65 -40 to +80F1b)/F2b)F1b)/F2b)F1b)/F2b)G 3~ 400 ∆ 50 700 0.21 0.61 — 45 -40 to +70*8D 500 M8D 110-EF 0°3~ 400 Y 50 615 0.12 0.25 — 34 -40 to +70F1b)/F2b)Hsubject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]AAA1239359309200.290.300.320.750.760.75707071806040200,1 0,2 0,33333E322222C11 1A11BBBBCCCDDDEEE1231231231238007857659509409458458307909609559500.200.210.230.240.250.290.170.180.200.200.210.230.360.370.400.710.720.740.310.330.360.680.680.69676667696972666668687071D0 1000 2000 3000 [CFM]1000 2000 3000 4000 5000 6000 [m 3 /h]-10˚-5˚0˚76

– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A6D 500-AG03 -01"A" A6D 500-AG03 -02"V" A6D 500-AH03 -01"A" A6D 500-AH03 -02"V" A6D 500-AI03 -01"A" A6D 500-AI03 -02"V""A"A8D 500-AG01 -01A8D 500-AG01 -02W6D 500-GG03 -01W6D 500-DG03 -02W6D 500-GH03 -01W6D 500-DH03 -02W6D 500-GI03 -01W6D 500-DI03 -02W8D 500-GG01 -01W8D 500-DG01 -02S6D 500-CG03 -01—S6D 500-CH03 -01—S6D 500-CI03 -01—S8D 500-CG01 -01—S6D 500-AG03 -01—S6D 500-AH03 -01—S6D 500-AI03 -01—S8D 500-AG01 -01——S6D 500-BG03 -02—S6D 500-BH03 -02—S6D 500-BI03 -02—S8D 500-BG01 -02—S6D 500-AG03 -02—S6D 500-AH03 -02—S6D 500-AI03 -02—S8D 500-AG01 -02————————AC axialA seriesEC axial fansCurves[Pa]5040300,20 [in H 2O]0,15332G2200,10H110,05AC axialK seriesEC axialS seriesGeneralinformationn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motorGGGHHH1231237107107006356306150.190.200.210.110.120.120.640.630.610.230.240.25646265616061ESMEC-SYSTEMSAccessories100 500 1000 1500 2000 2500 [CFM]1000 2000 3000 4000[m 3 /h]Technology-10˚-5˚0˚Drawingsp. 82 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.77Contacts

AC axial fansS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionType Motor VAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4E 500 M4E 110-EF-10°A1~ 230 50 1300 0.53 2.31 10.0 /450 115 -40 to +75A2b)*4E 500 M4E 110-GF0°B1~ 230 50 1270 0.76 3.33 14.0 /400 130 -40 to +60A2b)*4E 500 M4E 110-GF-5°C1~ 230 50 1330 0.71 3.10 14.0 /450 160 -40 to +70A2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H2O]1603AAA1231345132013000.470.510.532.062.212.3176777814012010080600,2 0,4 0,6323A2211B1CBBBCCC1231231305128512701375135513300.710.750.760.590.640.713.133.283.332.592.803.1077777876778040200 1250 2500375050002000 4000 6000 8000-10˚-5˚[CFM][m 3 /h]0˚78

AC axialK seriesGeneralinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flow"V""A""V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fanA4E 500-AI01 -01A4E 500-AI01 -02A4E 500-AD03 -01A4E 500-AD03 -02A4E 500-AE03 -01A4E 500-AE03 -02W4E 500-GI01 -01W4E 500-DI01 -02W4E 500-GD03 -01W4E 500-DD03 -02W4E 500-GE03 -01W4E 500-DE03 -02S4E 500-CI01 -01—S4E 500-CD03 -01—S4E 500-CE03 -01—S4E 500-AI01 -01—S4E 500-AD03 -01—S4E 500-AE03 -01——S4E 500-BI01 -02—S4E 500-BD03 -02—S4E 500-BE03 -02—S4E 500-AI01 -02—S4E 500-AD03 -02—S4E 500-AE03 -02——W4E 500-ID03 -01———TechnologyAccessoriesEC-SYSTEMSAC axialA seriesEC axial fansESMQ-motorEC axialS seriesDrawingsp. 82 ff.Capacitorp. 382 f.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.79Contacts

AC axial fansS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionType Motor VAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6E 500 M6E 110-EF0°A1~ 230 50 890 0.30 1.32 8.0 /400 70 -40 to +80A2b)*6E 500 M6E 110-EF-5°B1~ 230 50 910 0.27 1.19 8.0 /450 80 -40 to +85A2b)*6E 500 M6E 110-EF-10°C1~ 230 50 930 0.25 1.10 8.0 /450 85 -40 to +85A2b)*8E 500 M8E 110-EF 0° D 1~ 230 50 690 0.19 1.11 4.0 /450 40 -40 to +80A2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]8060400,1 0,2 0,33C32B31221A1AAABBBCCC1231231239109008909359259109459409300.280.290.300.240.250.270.230.240.251.201.251.321.041.091.190.991.041.10716970696972697174200 1000 2000 3000 [CFM]1000 2000 3000 4000 5000 6000[m 3 /h]-10˚-5˚0˚80

Direction of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fanCurves[Pa]500,20 [in H 2O]40300,153D2200,1010,05AC axialK seriesGeneralinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS series"V""A""V""A""V""A""V""A"A6E 500-AG03 -01A6E 500-AG03 -02A6E 500-AH03 -01A6E 500-AH03 -02A6E 500-AI03 -01A6E 500-AI03 -02A8E 500-AG01 -01A8E 500-AG01 -02W6E 500-GG03 -01W6E 500-DG03 -02W6E 500-GH03 -01W6E 500-DH03 -02W6E 500-GI03 -01W6E 500-DI03 -02W8E 500-GG01 -01W8E 500-DG01 -02S6E 500-CG03 -01—S6E 500-CH03 -01—S6E 500-CI03 -01—S8E 500-CG01 -01—S6E 500-AG03 -01—S6E 500-AH03 -01—S6E 500-AI03 -01—S8E 500-AG01 -01——S6E 500-BG03 -02—S6E 500-BH03 -02—S6E 500-BI03 -02—S8E 500-BG01 -02—S6E 500-AG03 -02—S6E 500-AH03 -02—S6E 500-AI03 -02—S8E 500-AG01 -02W6E 500-IG03 -01———————AC axialA seriesEC axial fansEC axialS seriesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motorDDD1236956956900.180.190.191.091.101.11646363ESMEC-SYSTEMSAccessories100 500 1000 1500 2000 2500 [CFM]1000 2000 3000 4000-10˚-5˚[m 3 /h]0˚TechnologyDrawingsp. 82 ff.Capacitorp. 382 f.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.81Contacts

AC axial fansS series, Ø 500, drawings for direction of air flow "V"Without attachments99x9964,5Cable glanddcg±2±2±3±2497±0.31154xM6Depth of screwmax. 12 mmTypeA4D 500-AI01 -01A4D 500-AD03 -01A4D 500-AE03 -01A6D 500-AG03 -01A6D 500-AH03 -01A6D 500-AI03 -01A8D 500-AG01 -01A4E 500-AI01 -01A4E 500-AD03 -01A4E 500-AE03 -01A6E 500-AG03 -01A6E 500-AH03 -01A6E 500-AI03 -01A8E 500-AG01 -01Mass[kg]8.811.011.08.88.88.88.88.811.011.08.88.88.88.8c d g92.0104.098.0104.098.092.0104.092.0104.098.0104.098.092.0104.078.0 188.5101.0 208.589.0 208.5101.0 188.589.0 188.578.0 188.5101.0 188.578.0 188.5101.0 208.589.0 208.5101.0 188.589.0 188.578.0 188.5101.0 188.5❮ "V"535With full square nozzle175±5Ø11TypeW4D 500-GI01 -01W4D 500-GD03 -01W4D 500-GE03 -01W6D 500-GG03 -01W6D 500-GH03 -01W6D 500-GI03 -01W8D 500-GG01 -01W4E 500-GI01 -01W4E 500-GD03 -01W4E 500-GE03 -01W6E 500-GG03 -01W6E 500-GH03 -01W6E 500-GI03 -01W8E 500-GG01 -01Mass[kg]18.621.021.018.618.618.618.618.621.021.018.618.618.618.616 615±1120656-3❮ "V"With guard grille for full nozzler±3st±4±3±1520535View X6,5TypeS4D 500-CI01 -01S4D 500-CD03 -01S4D 500-CE03 -01S6D 500-CG03 -01S6D 500-CH03 -01S6D 500-CI03 -01S8D 500-CG01 -01S4E 500-CI01 -01S4E 500-CD03 -01S4E 500-CE03 -01S6E 500-CG03 -01S6E 500-CH03 -01S6E 500-CI03 -01S8E 500-CG01 -01Mass[kg]12.614.814.812.612.612.612.612.614.814.812.612.612.612.6r s t63.565.565.565.565.563.563.563.565.565.563.563.563.563.591.0 123.0103.0 143.097.0 143.0103.0 123.097.0 123.097.0 123.0103.0 123.091.0 123.0103.0 143.097.0 143.0103.0 123.097.0 123.097.0 123.0103.0 123.0❮ "V"82

51GeneralinformationWith guard grille for short nozzle124,57u±4❮ "V"525565v±38,5TypeS4D 500-AI01 -01S4D 500-AD03 -01S4D 500-AE03 -01S6D 500-AG03 -01S6D 500-AH03 -01S6D 500-AI03 -01S8D 500-AG01 -01S4E 500-AI01 -01S4E 500-AD03 -01S4E 500-AE03 -01S6E 500-AG03 -01S6E 500-AH03 -01S6E 500-AI03 -01S8E 500-AG01 -01Mass[kg]13.315.515.513.313.313.313.313.315.515.513.313.313.313.3u32.044.038.044.038.032.044.032.044.038.044.038.032.044.0v64.084.084.064.064.064.064.064.084.084.064.064.064.064.0AC axial fansAC axialS seriesAC axialK seriesAC axialA seriesIn-line duct fan9912x30˚TypeW4D 500-ID03 -01W4E 500-ID03 -01W6E 500-IG03 -01Mass[kg]16.816.814.8EC axial fansTechnologyAccessoriesEC-SYSTEMSQ-motorESMØ503Ø567EC axialS series166Ø54112xØ9,5❮ "V"83Contacts

AC axial fansS series, Ø 500, drawings for direction of air flow "A"Without attachments99x9964,5Cable glandgcd±2±3±2±2497±0.31154xM6Depth of screwmax. 12 mmTypeA4D 500-AI01 -02A4D 500-AD03 -02A4D 500-AE03 -02A6D 500-AG03 -02A6D 500-AH03 -02A6D 500-AI03 -02A8D 500-AG01 -02A4E 500-AI01 -02A4E 500-AD03 -02A4E 500-AE03 -02A6E 500-AG03 -02A6E 500-AH03 -02A6E 500-AI03 -02A8E 500-AG01 -02Mass[kg]8.811.011.08.88.88.88.88.811.011.08.88.88.88.8c d g95.0131.0126.0131.0126.0120.0131.0120.0131.0126.0131.0126.0120.0131.078.0 188.5101.0 208.589.0 208.5101.0 188.589.0 188.578.0 188.5101.0 188.578.0 188.5101.0 208.589.0 208.5101.0 188.589.0 188.578.0 188.5101.0 188.5"A" ❯With full square nozzle209,5±543Ø517Ø11TypeW4D 500-DI01 -02W4D 500-DD03 -02W4D 500-DE03 -02W6D 500-DG03 -02W6D 500-DH03 -02W6D 500-DI03 -02W8D 500-DG01 -02W4E 500-DI01 -02W4E 500-DD03 -02W4E 500-DE03 -02W6E 500-DG03 -02W6E 500-DH03 -02W6E 500-DI03 -02W8E 500-DG01 -02Mass[kg]18.821.021.018.818.818.818.818.821.021.018.818.818.818.816120"A" ❯615±1656-3With guard grille for full nozzle89,57ts±3±46308,5TypeS4D 500-BI01 -02S4D 500-BD03 -02S4D 500-BE03 -02S6D 500-BG03 -02S6D 500-BH03 -02S6D 500-BI03 -02S8D 500-BG01 -02S4E 500-BI01 -02S4E 500-BD03 -02S4E 500-BE03 -02S6E 500-BG03 -02S6E 500-BH03 -02S6E 500-BI03 -02S8E 500-BG01 -02Mass[kg]12.614.814.812.612.612.612.612.614.814.812.612.612.612.6s95.0119.0119.099.099.095.0106.095.0119.0119.0106.0101.095.0106.0t99.0106.0101.0106.0101.099.099.099.0106.0101.099.099.099.099.0"A" ❯84

GeneralinformationWith guard grille for short nozzle139,57v±3u±4"A" ❯5658,5TypeS4D 500-AI01 -02S4D 500-AD03 -02S4D 500-AE03 -02S6D 500-AG03 -02S6D 500-AH03 -02S6D 500-AI03 -02S8D 500-AG01 -02S4E 500-AI01 -02S4E 500-AD03 -02S4E 500-AE03 -02S6E 500-AG03 -02S6E 500-AH03 -02S6E 500-AI03 -02S8E 500-AG01 -02Mass[kg]12.314.514.512.312.312.312.312.314.514.512.312.312.312.3u45.056.051.056.051.045.056.045.056.051.056.051.045.056.0v49.069.069.049.049.049.049.049.069.069.049.049.049.049.0AC axial fansTechnologyAccessoriesAC axialS seriesEC-SYSTEMSESMAC axialK seriesAC axialA seriesQ-motorEC axialS seriesEC axial fans85Contacts

AC axial fansS series, Ø 560– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4D 560*4D 560*6D 560M4D 110-GFM4D 110-IAM6D 110-EF-10°-5°0°ACE3~ 400 ∆3~ 400 ∆3~ 400 ∆505050130513558600.931.170.501.782.530.95———19517080-40 to +65-40 to +60-40 to +55BDF3~ 400 Y3~ 400 Y3~ 400 Y50505099510806150.600.800.301.051.450.52———11011340-40 to +65-40 to +60-40 to +55F1b)/F2b)F1b)/F2b)F1b)/F2b)*6D 560 M6D 110-EF -5°G 3~ 400 ∆ 50 890 0.43 0.90 — 90 -40 to +70H 3~ 400 Y 50 660 0.28 0.48 — 50 -40 to +70F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]20016012080400,2 0,4 0,6 0,83B32A23D13121C21AAABBBCCCDDD123123123123135013301305108510409951385137013551155112510800.760.840.930.530.560.600.991.071.170.720.760.801.501.601.780.890.951.052.332.452.531.281.351.4579798076757580808177767701500 3000 450060002000 4000 6000 8000 10000-10˚-5˚[CFM][m 3 /h]0˚86

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A4D 560-AF03 -01"A" A4D 560-AF03 -02"V" A4D 560-AB01 -01"A" A4D 560-AB01 -02"V" A6D 560-AG03 -01"A" A6D 560-AG03 -02"V""A"A6D 560-AH03 -01A6D 560-AH03 -02W4D 560-GF03 -01W4D 560-DF03 -02W4D 560-GB01 -01W4D 560-DB01 -02W6D 560-GG03 -01W6D 560-DG03 -02W6D 560-GH03 -01W6D 560-DH03 -02S4D 560-CF03 -01—S4D 560-CB01 -01—S6D 560-CG03 -01—S6D 560-CH03 -01—S4D 560-AF03 -01—S4D 560-AB01 -01—S6D 560-AG03 -01—S6D 560-AH03 -01——S4D 560-BF03 -02—S4D 560-BB01 -02—S6D 560-BG03 -02—S6D 560-BH03 -02—S4D 560-AF03 -02—S4D 560-AB01 -02—S6D 560-AG03 -02—S6D 560-AH03 -02——W4D 560-IB01 -01—W6D 560-IG03 -01———AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]100806040200,1 0,2 0,3 0,433HF232G321121E1EEEFFFGGGHHH1231231231238858758606706456159159008907206956600.430.460.500.280.290.300.360.390.430.250.260.280.870.890.950.490.500.520.780.810.900.400.420.48737374666666717171666564Accessories EC-SYSTEMS ESM0 1250 2500 375050002000 4000 6000 8000-10˚-5˚[CFM][m 3 /h]0˚TechnologyDrawingsp. 90 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.87Contacts

AC axial fansS series, Ø 560– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionType Motor VAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4E 560 M4E 110-IA-5°A1~ 230 50 1300 1.05 4.60 20.0 /400 110 -40 to +60A2b)*6E 560 M6E 110-GF-5°B1~ 230 50 910 0.43 1.95 10.0 /450 90 -40 to +70A2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa]0,5 [in H 2O]1203AAA1231330131013000.971.011.054.214.394.607979791000,4A8026040200,1 0,2 0,3101500 3000 450060002000 4000 6000 8000 10000-10˚-5˚[CFM][m 3 /h]0˚88

AC axialK seriesGeneralinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fanA4E 560-AB01 -01A4E 560-AB01 -02A6E 560-AE01 -01A6E 560-AE01 -02W4E 560-GB01 -01W4E 560-DB01 -02W6E 560-GE01 -01W6E 560-DE01 -02S4E 560-CB01 -01—S6E 560-CE01 -01—S4E 560-AB01 -01—S6E 560-AE01 -01——S4E 560-BB01 -02—S6E 560-BE01 -02—S4E 560-AB01 -02—S6E 560-AE01 -02W4E 560-IB01 -01———AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]1008060400,1 0,2 0,3 0,43B21BBB1239359259100.370.390.431.651.801.95737272Accessories EC-SYSTEMS ESM200 1250 2500 375050002000 4000 6000 8000-10˚-5˚[CFM][m 3 /h]0˚TechnologyDrawingsp. 90 ff.Capacitorp. 382 f.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.89Contacts

AC axial fansS series, Ø 560, drawings for direction of air flow "V"Without attachmentsdc±2±3±2±0.399x99552115TypeA4D 560-AF03 -01A4D 560-AB01 -01A6D 560-AG03 -01A6D 560-AH03 -01A4E 560-AB01 -01A6E 560-AE01 -01Mass[kg]11.513.59.09.013.511.5c d g95.0105.0114.0105.0105.0105.096.0 208.5113.0 223.5129.0 188.5113.0 188.5113.0 223.5113.0 208.5Cable gland64,5g±2❮ "V"4xM6Depth of screwmax. 12 mmWith full square nozzle189±5TypeW4D 560-GF03 -01W4D 560-GB01 -01W6D 560-GG03 -01W6D 560-GH03 -01W4E 560-GB01 -01W6E 560-GE01 -01Mass[kg]20.021.518.018.021.520.0Ø11594135❮ "V"16 675725±1-3With guard grille for full nozzleView X6,5TypeS4D 560-CF03 -01S4D 560-CB01 -01S6D 560-CG03 -01S6D 560-CH03 -01S4E 560-CB01 -01S6E 560-CE01 -01Mass[kg]14.015.512.012.015.514.0s95.0105.0114.0105.0105.0105.0t144.0159.0124.0124.0159.0144.0579594±164,5±3st±4±3❮ "V"90

45With guard grille for short nozzle124,578,5TypeS4D 560-AF03 -01S4D 560-AB01 -01S6D 560-AG03 -01S6D 560-AH03 -01S4E 560-AB01 -01S6E 560-AE01 -01Mass[kg]15.517.013.513.517.015.5u35.045.054.045.045.045.0v84.099.064.064.099.084.0AC axial fans654700AC axialS seriesAC axialK seriesGeneralinformationu±4❮ "V"v±3AC axialA seriesIn-line duct fan9916x22,5˚TypeW4D 560-IB01 -01W6D 560-IG03 -01W4E 560-IB01 -01Mass[kg]20.916.420.9EC axial fansTechnologyAccessoriesEC-SYSTEMSQ-motorESMØ559Ø635EC axialS series21016xØ11,5❮ "V"Ø60591Contacts

AC axial fansS series, Ø 560, drawings for direction of air flow "A"Without attachments99x99cd±3±2±2552±0.3115TypeA4D 560-AF03 -02A4D 560-AB01 -02A6D 560-AG03 -02A6D 560-AH03 -02A4E 560-AB01 -02A6E 560-AE01 -02Mass[kg]11.513.59.09.013.511.5c d g134.0142.0149.0142.0142.0142.096.0 208.5113.0 223.5129.0 188.5113.0 188.5113.0 223.5113.0 208.5Cable gland64,5g±2"A" ❯4xM6Depth of screwmax. 12 mmWith full square nozzle209,5±537,5TypeW4D 560-DF03 -02W4D 560-DB01 -02W6D 560-DG03 -02W6D 560-DH03 -02W4E 560-DB01 -02W6E 560-DE01 -02Mass[kg]20.321.818.318.321.820.3Ø11Ø57616135"A" ❯675±1725-3With guard grille for full nozzle74,578,5TypeS4D 560-BF03 -02S4D 560-BB01 -02S6D 560-BG03 -02S6D 560-BH03 -02S4E 560-BB01 -02S6E 560-BE01 -02Mass[kg]14.015.512.012.015.514.0s134.0149.0114.0114.0149.0134.0t124.0132.0139.0132.0132.0132.0790t±3s±4"A" ❯92

With guard grille for short nozzle139,578,5TypeS4D 560-AF03 -02S4D 560-AB01 -02S6D 560-AG03 -02S6D 560-AH03 -02S4E 560-AB01 -02S6E 560-AE01 -02Mass[kg]14.516.012.512.516.014.5u59.067.074.067.067.067.0v69.084.049.049.084.069.0700AC axialK seriesGeneralinformationAC axial fansAC axialS seriesv±3u±4"A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans93Contacts

AC axial fansS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4D 630 M4D 138-HF*4D 630 M4D 138-HF*4D 630 M4D 138-LA-5°-10°0°ABCDEF3~ 400 ∆ 50 1330 1.94 3.40 — 200 -40 to +653~ 400 Y 50 1040 1.29 2.20 — 120 -40 to +653~ 400 ∆ 50 1360 1.62 3.02 — 200 -40 to +653~ 400 Y 50 1120 1.12 1.87 — 130 -40 to +653~ 400 ∆ 50 1340 2.53 4.95 — 240 -40 to +603~ 400 Y 50 1045 1.64 2.88 — 145 -40 to +60F1b)/F2b)F1b)/F2b)F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa]2202001801601401201008060[in H 2O]0,2 0,4 0,60,83D333CB22121A211AAABBBCCCDDD1231231231231350133513301095106510401390138013601190116011201.661.781.941.161.221.291.291.411.620.981.041.123.033.173.401.952.042.202.582.703.021.651.751.8779798173737580808376757840200 2500 50007500100004000 8000 12000 16000-10˚-5˚[CFM][m 3 /h]0˚94

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axialK seriesAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A4D 630-AN01 -01"A" A4D 630-AN01 -02"V" A4D 630-AO01 -01"A" A4D 630-AO01 -02"V""A"A4D 630-AJ01 -01A4D 630-AJ01 -02W4D 630-GN01 -01W4D 630-DN01 -02W4D 630-GO01 -01W4D 630-DO01 -02W4D 630-GJ01 -01W4D 630-DJ01 -02S4D 630-CN01 -01—S4D 630-CO01 -01—S4D 630-CJ01 -01—S4D 630-AN01 -01—S4D 630-AO01 -01—S4D 630-AJ01 -01——S4D 630-BN01 -02—S4D 630-BO01 -02—S4D 630-BJ01 -02——————W4D 630-IN01 -01—————AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]240200160120800,4 0,6 0,8 1,03F231E21EEEFFF1231231355134513401085106510452.282.402.531.561.611.644.434.634.952.732.822.88787981727375Accessories EC-SYSTEMS ESM400,20 4000 8000120004000 8000 12000 16000 20000-10˚-5˚[CFM][m 3 /h]0˚TechnologyDrawingsp. 96 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.95Contacts

AC axial fansS series, Ø 630, drawings for direction of air flow "V"Without attachmentsc±3d±2TypeA4D 630-AN01 -01A4D 630-AO01 -01A4D 630-AJ01 -01Mass[kg]20.020.024.0c d g147.0 133.0 251.0142.0 118.0 251.0152.0 147.0 276.0184627 ±299x99162±0.3Cable gland75g±2❮ "V"8 x M10Depth of screwmax. 18 mmWith full square nozzle216±5TypeW4D 630-GN01 -01W4D 630-GO01 -01W4D 630-GJ01 -01Mass[kg]37.037.041.0Ø11696150❮ "V"20750 ±1805 -3With guard grille for full nozzleView X107,56815,5TypeS4D 630-CN01 -01S4D 630-CO01 -01S4D 630-CJ01 -01Mass[kg]28.028.032.0s146.0141.076.0t175.0175.0151.0655±1699269276±3s ±4t ±3❮ "V"96

With guard grille for short nozzleu±4TypeS4D 630-AN01 -01S4D 630-AO01 -01S4D 630-AJ01 -01Mass[kg]29.529.533.5u80.075.085.0v109.0109.0134.0AC axial fansAC axialK seriesØ720Ø750AC axialS seriesGeneralinformation410142±3v±3❮ "V"AC axialA seriesIn-line duct fan9916x22,5˚TypeMass[kg]W4D 630-IN01 -01 27.9EC axial fans46Q-motorTechnologyAccessoriesEC-SYSTEMSESMØ634Ø707EC axialS series22016xØ11,5❮ "V"Ø67497Contacts

AC axial fansS series, Ø 630, drawings for direction of air flow "A"Without attachmentsc±3d±2TypeA4D 630-AN01 -02A4D 630-AO01 -02A4D 630-AJ01 -02Mass[kg]20.020.024.0c d g175.0 133.0 251.0165.0 118.0 251.0185.0 147.0 276.0184627 ±299x99162±0.3Cable gland75g±2"A" ❯8 x M10Depth of screwmax. 18 mmWith full square nozzle275±5TypeW4D 630-DN01 -02W4D 630-DO01 -02W4D 630-DJ01 -02Mass[kg]38.038.042.0Ø11Ø69620150"A" ❯750±1805-3With guard grille for full nozzle4s±4TypeS4D 630-BN01 -02S4D 630-BO01 -02S4D 630-BJ01 -02Mass[kg]29.029.033.0s126.0116.0136.0t127.0127.0152.0Ø724Ø750124±3 t±310"A" ❯98

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation99Contacts

AC axial fansS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6D 630*6D 630*6D 630M6D 110-GFM6D 110-GFM6D 110-IA-5°-10°0°ACE3~ 400 ∆3~ 400 ∆3~ 400 ∆5050508909108850.610.530.831.261.151.68———105110120-40 to +60-40 to +70-40 to +55BDF3~ 400 Y3~ 400 Y3~ 400 Y5050506807256550.400.380.530.720.670.95———607068-40 to +60-40 to +70-40 to +55F1b)/F2b)F1b)/F2b)F1b)/F2b)*8D 630 M8D 110-GF 0°G 3~ 400 ∆ 50 640 0.38 0.91 — 62 -40 to +65H 3~ 400 Y 50 440 0.21 0.42 — 30 -40 to +65F1b)/F2b)*8D 630 M8D 110-GF -5°I 3~ 400 ∆ 50 660 0.33 0.85 — 65 -40 to +75J 3~ 400 Y 50 500 0.20 0.40 — 35 -40 to +75F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa]0,5 [in H 2O]1201000,4333EAAABBB1231239259158907707456800.480.520.610.350.370.401.121.161.260.630.660.72757576727171806040200,1 0,2 0,33D33CF2222B1A1121211CCCDDDEEEFFF1231231231239409309108258057259159058857357106550.410.450.530.290.310.380.670.720.830.470.490.531.041.061.150.520.550.671.481.541.680.830.860.9575757873727475767671717001500 3000 450060002000 4000 6000 8000 10000-10˚-5˚[CFM][m 3 /h]0˚100

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flowAC axialK series❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A6D 630-AE01 -01"A" A6D 630-AE01 -02"V" A6D 630-AF01 -01"A" A6D 630-AF01 -02"V""A"A6D 630-AA01 -01A6D 630-AA01 -02"V" A8D 630-AD01 -01"A" A8D 630-AD01 -02"V" A8D 630-AE01 -01"A" A8D 630-AE01 -02W6D 630-GE01 -01W6D 630-DE01 -02W6D 630-GF01 -01W6D 630-DF01 -02W6D 630-GA01 -01W6D 630-DA01 -02W8D 630-GD01 -01W8D 630-DD01 -02W8D 630-GE01 -01W8D 630-DE01 -02S6D 630-CE01 -01—S6D 630-CF01 -01—S6D 630-CA01 -01—S8D 630-CD01 -01—S8D 630-CE01 -01—S6D 630-AE01 -01—S6D 630-AF01 -01—S6D 630-AA01 -01—S8D 630-AD01 -01—S8D 630-AE01 -01——S6D 630-BE01 -02—S6D 630-BF01 -02—S6D 630-BA01 -02—S8D 630-BD01 -02—S8D 630-BE01 -02—S6D 630-AE01 -02—S6D 630-AF01 -02—S6D 630-AA01 -02—S8D 630-AD01 -02—S8D 630-AE01 -02————W6D 630-IA01 -01—————AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]70GGG1236606556400.330.350.380.840.850.91696969ESM60504030200,1 0,233HJ33I22G2211HHHIIIJJJ1231231234954754406806756605555355000.190.200.210.280.300.330.170.180.200.400.410.420.810.820.850.360.380.40636261697071717171Accessories EC-SYSTEMS1100 1250 2500 375050002000 4000 6000 8000[CFM][m 3 /h]Technology-10˚-5˚0˚Drawingsp. 104 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.101Contacts

AC axial fansS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionType Motor VAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6E 630 M6E 110-GF-5°A1~ 230 50 880 0.61 2.65 14.0 /450 100 -40 to +60A2b)*6E 630 M6E 110-GF-10°B1~ 230 50 905 0.49 2.15 12.0 /450 100 -40 to +70A2b)*6E 630 M6E 110-IA0°C1~ 230 50 860 0.76 3.35 16.0 /450 100 -40 to +50A2b)*8E 630 M8E 110-GF -5° D 1~ 230 50 655 0.35 1.79 7.0 /450 60 -40 to +60A2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]1008060400,1 0,2 0,3 0,43B33222A1C11AAABBBCCC1231231239058958809259209058908758600.550.580.610.430.450.490.710.730.762.412.512.651.891.992.153.113.233.357575767576787676762001500 3000 450060002000 4000 6000 8000 10000-10˚-5˚[CFM][m 3 /h]0˚102

AC axialK seriesGeneralinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flow"V""A""V""A""V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fanA6E 630-AE01 -01A6E 630-AE01 -02A6E 630-AF01 -01A6E 630-AF01 -02A6E 630-AA03 -01A6E 630-AA03 -02A8E 630-AE01 -01A8E 630-AE01 -02W6E 630-GE01 -01W6E 630-DE01 -02W6E 630-GF01 -01W6E 630-DF01 -02W6E 630-GA03 -01W6E 630-DA03 -02W8E 630-GE01 -01W8E 630-DE01 -02S6E 630-CE01 -01—S6E 630-CF01 -01—S6E 630-CA03 -01—S8E 630-CE01 -01—S6E 630-AE01 -01—S6E 630-AF01 -01—S6E 630-AA03 -01—S8E 630-AE01 -01——S6E 630-BE01 -02—S6E 630-BF01 -02—S6E 630-BA03 -02—S8E 630-BE01 -02—S6E 630-AE01 -02—S6E 630-AF01 -02—S6E 630-AA03 -02—S8E 630-AE01 -02————W6E 630-IA03 -01———AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]70DDD1236856756550.300.320.351.611.681.79696969ESM603504030200,1 0,2D21EC-SYSTEMSAccessories100 1250 2500 375050002000 4000 6000 8000[CFM][m 3 /h]Technology-10˚-5˚0˚Drawingsp. 104 ff.Capacitorp. 382 f.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.103Contacts

AC axial fansS series, Ø 630, drawings for direction of air flow "V"Without attachments99x99dc±2±3±2627±0.3115TypeA6D 630-AE01 -01A6D 630-AF01 -01A6D 630-AA01 -01A8D 630-AD01 -01A8D 630-AE01 -01A6E 630-AE01 -01A6E 630-AF01 -01A6E 630-AA03 -01A8E 630-AE01 -01Mass[kg]12.512.514.012.512.512.512.514.012.5c d g108.0 116.0 208.596.0 96.0 208.5120.0 135.0 223.5120.0 135.0 208.5108.0 116.0 208.5108.0 116.0 208.596.0 96.0 208.5120.0 135.0 223.5108.0 116.0 208.5Cable gland64,5g±2❮ "V"4xM6Depth of screwmax. 12 mm670With full square nozzle214±5TypeW6D 630-GE01 -01W6D 630-GF01 -01W6D 630-GA01 -01W8D 630-GD01 -01W8D 630-GE01 -01W6E 630-GE01 -01W6E 630-GF01 -01W6E 630-GA03 -01W8E 630-GE01 -01Mass[kg]20.520.523.020.520.520.520.523.020.5Ø11150❮ "V"20 750805±1-3With guard grille for full nozzle±1655670View X6,5TypeS6D 630-CE01 -01S6D 630-CF01 -01S6D 630-CA01 -01S8D 630-CD01 -01S8D 630-CE01 -01S6E 630-CE01 -01S6E 630-CF01 -01S6E 630-CA03 -01S8E 630-CE01 -01Mass[kg]14.514.517.014.514.514.514.517.014.5s97.585.5109.5109.597.597.585.5109.597.5t111.5111.5126.5133.5111.5133.5111.5148.5133.575±3st±4±3❮ "V"104

46GeneralinformationWith guard grille for short nozzle149,576987508,5TypeS6D 630-AE01 -01S6D 630-AF01 -01S6D 630-AA01 -01S8D 630-AD01 -01S8D 630-AE01 -01S6E 630-AE01 -01S6E 630-AF01 -01S6E 630-AA03 -01S8E 630-AE01 -01Mass[kg]16.016.018.516.016.016.016.018.516.0u23.011.035.035.023.023.011.035.023.0v59.059.074.059.059.059.059.074.059.0AC axial fansAC axialS seriesAC axialK seriesu±4❮ "V"v±3AC axialA seriesIn-line duct fan9916x22,5˚TypeW6D 630-IA01 -01W6E 630-IA03 -01Mass[kg]21.421.4TechnologyEC axial fansQ-motorAccessoriesEC-SYSTEMSESMØ634Ø707EC axialS series22016xØ11,5❮ "V"Ø674105Contacts

AC axial fansS series, Ø 630, drawings for direction of air flow "A"Without attachments99x99cd±3±2±2627±0.3115TypeA6D 630-AE01 -02A6D 630-AF01 -02A6D 630-AA01 -02A8D 630-AD01 -02A8D 630-AE01 -02A6E 630-AE01 -02A6E 630-AF01 -02A6E 630-AA03 -02A8E 630-AE01 -02Mass[kg]12.512.514.012.512.512.512.514.012.5c d g142.0 116.0 208.5134.0 96.0 208.5149.0 135.0 223.5149.0 135.0 208.5142.0 116.0 208.5142.0 116.0 208.5134.0 96.0 208.5149.0 135.0 223.5142.0 116.0 208.5Cable gland64,5g±2"A" ❯4xM6Depth of screwmax. 12 mmWith full square nozzle194,5±537,5Ø653TypeW6D 630-DE01 -02W6D 630-DF01 -02W6D 630-DA01 -02W8D 630-DD01 -02W8D 630-DE01 -02W6E 630-DE01 -02W6E 630-DF01 -02W6E 630-DA03 -02W8E 630-DE01 -02Mass[kg]21.021.023.521.021.021.021.023.521.0Ø1120150"A" ❯750±1805-3With guard grille for full nozzle44,577508,5TypeS6D 630-BE01 -02S6D 630-BF01 -02S6D 630-BA01 -02S8D 630-BD01 -02S8D 630-BE01 -02S6E 630-BE01 -02S6E 630-BF01 -02S6E 630-BA03 -02S8E 630-BE01 -02Mass[kg]14.514.517.014.514.514.514.517.014.5s164.0164.0179.0164.0164.0164.0164.0179.0164.0t162.0154.0169.0169.0162.0162.0154.0169.0162.0t±3s±4"A" ❯106

GeneralinformationWith guard grille for short nozzle114,577508,5TypeS6D 630-AE01 -02S6D 630-AF01 -02S6D 630-AA01 -02S8D 630-AD01 -02S8D 630-AE01 -02S6E 630-AE01 -02S6E 630-AF01 -02S6E 630-AA03 -02S8E 630-AE01 -02Mass[kg]15.015.017.515.015.015.015.017.515.0u92.084.099.099.092.092.084.099.092.0v94.094.0109.094.094.094.094.0109.094.0AC axial fansAC axialS seriesAC axialK seriesv±3u±4"A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans107Contacts

AC axial fansS series, Ø 710– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*4D 710 M4D 138-LA*6D 710 M6D 138-HF-10°-5°ABCD3~ 400 ∆ 50 1350 2.32 4.65 — 280 -40 to +703~ 400 Y 50 1090 1.59 2.78 — 180 -40 to +703~ 400 ∆ 50 910 1.01 2.40 — 130 -40 to +803~ 400 Y 50 750 0.70 1.33 — 87 -40 to +80F1b)/F2b)F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]2502001,00,832AAAABBB1231231380136013501160111010901.962.212.321.431.551.594.134.494.652.502.702.78828687788081321500,6B11000,41500,20 2000 4000 6000 800010000 120004000 8000 12000 16000 20000-10˚-5˚[CFM][m 3 /h]0˚108

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axialK seriesAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A4D 710-AL01 -01"A" A4D 710-AL01 -02"V""A"A6D 710-AN01 -01A6D 710-AN01 -02W4D 710-GL01 -01W4D 710-DL01 -02W6D 710-GN01 -01W6D 710-DN01 -02S4D 710-CL01 -01—S6D 710-CN01 -01—S4D 710-AL01 -01—S6D 710-AN01 -01——S4D 710-BL01 -02—S6D 710-BN01 -02————W4D 710-IL01 -01—W6D 710-IN01 -01—EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa]140120100806040[in H 2O]0,1 0,2 0,30,40,5323D12C1CCCDDD1231239259209107807657500.910.971.010.650.680.702.322.382.401.221.271.33727577697172Accessories EC-SYSTEMS ESM200 2500 500075004000 8000 12000 1600010000[CFM][m 3 /h]Technology-10˚-5˚0˚Drawingsp. 110 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.109Contacts

AC axial fansS series, Ø 710, drawings for direction of air flow "V"Without attachments147±3TypeA4D 710-AL01 -01A6D 710-AN01 -01Mass[kg]25.021.0g276.0251.0133±2184703 ±299x99162±0.3Cable gland75g±2❮ "V"8 x M10Depth of screwmax. 18 mmWith full square nozzle244 ±5TypeW4D 710-GL01 -01W6D 710-GN01 -01Mass[kg]43.039.0Ø14,5772170❮ "V"20810 ±1850 -3With guard grille for full nozzleView X107,56815,5TypeS4D 710-CL01 -01S6D 710-CN01 -01Mass[kg]34.030.0t193.5168.5733±1777269282,5±3139,5±4❮ "V"t ±3110

With guard grille for short nozzleu±4TypeS4D 710-AL01 -01S6D 710-AN01 -01Mass[kg]35.531.5u31.027.0v90.065.0AC axial fansAC axialK seriesØ821Ø853AC axialS seriesGeneralinformation410186±3v±3❮ "V"AC axialA seriesIn-line duct fan9916x22,5˚TypeW4D 710-IL01 -01W6D 710-IN01 -01Mass[kg]40.036.0EC axial fans46Q-motorTechnologyAccessoriesEC-SYSTEMSESMØ711Ø785EC axialS series26016xØ11,5❮ "V"Ø751111Contacts

AC axial fansS series, Ø 710, drawings for direction of air flow "A"Without attachments175±3TypeA4D 710-AL01 -02A6D 710-AN01 -02Mass[kg]25.021.0g276.0251.0133±2184703 ±299x99162±0.3Cable gland75g±2"A" ❯8 x M10Depth of screwmax. 18 mmWith full square nozzle266±5TypeW4D 710-DL01 -02W6D 710-DN01 -02Mass[kg]44.040.0Ø14,5Ø77220170"A" ❯810±1850-3With guard grille for full nozzle4s±4TypeS4D 710-BL01 -02S6D 710-BN01 -02Mass[kg]35.032.0s144.0154.0t160.0155.0Ø827Ø85396±3 t±310"A" ❯112

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation113Contacts

AC axial fansS series, Ø 800– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6D 800*6D 800*6D 800M6D 138-HFM6D 138-HFM6D 138-LA-5°-10°0°ACE3~ 400 ∆3~ 400 ∆3~ 400 ∆5050508708958951.451.142.003.202.454.30———150160180-40 to +60-40 to +75-40 to +60BDF3~ 400 Y3~ 400 Y3~ 400 Y5050506107106850.810.751.271.641.452.50———7598100-40 to +60-40 to +75-40 to +60F1b)/F2b)F1b)/F2b)F1b)/F2b)*6D 800 M6D 138-NA +5°G 3~ 400 ∆ 50 910 2.18 5.17 — 120 -40 to +55H 3~ 400 Y 50 730 1.47 2.80 — 75 -40 to +55F1b)/F2b)*6D 800 M6D 138-NA 0°I 3~ 400 ∆ 50 915 2.08 4.62 — 180 -40 to +60J 3~ 400 Y 50 740 1.43 2.66 — 118 -40 to +60F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]1803AAA1239108908701.071.231.452.502.693.20727274160140120100806040200,2 0,4 0,633C323FE3A22 BD121212111BBBCCCDDDEEEFFF1231231231231237456906109209108957707357109159008957507056850.720.790.810.941.041.140.660.710.751.551.752.001.081.161.271.351.491.642.292.402.451.241.341.453.483.724.302.022.172.506866677475787070717172786867720 4000 8000120005000 10000 15000 20000 25000-10˚-5˚16000 [CFM][m 3 /h]0˚114

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialK seriesAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A6D 800-AN01 -01"A" A6D 800-AN01 -02"V" A6D 800-AO01 -01"A" A6D 800-AO01 -02"V""A"A6D 800-AJ01 -01A6D 800-AJ01 -02"V" A6D 800-AS01 -01"A" A6D 800-AS01 -02"V" A6D 800-AP01 -01"A" A6D 800-AP01 -02W6D 800-GN01 -01W6D 800-DN01 -02W6D 800-GO01 -01W6D 800-DO01 -02W6D 800-GJ01 -01W6D 800-DJ01 -02W6D 800-GS01 -01W6D 800-DS01 -02W6D 800-GP01 -01W6D 800-DP01 -02S6D 800-CN01 -01—S6D 800-CO01 -01—S6D 800-CJ01 -01—S6D 800-CS01 -01—S6D 800-CP01 -01—S6D 800-AN01 -01—S6D 800-AO01 -01—S6D 800-AJ01 -01—S6D 800-AS01 -01—S6D 800-AP01 -01——S6D 800-BN01 -02—S6D 800-BO01 -02—S6D 800-BJ01 -02—S6D 800-BS01 -02—S6D 800-BP01 -02——————————————W6D 800-IJ01 -01—————AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa]1801601401201008060[in H 2O]0,2 0,4 0,633J23I223G211GGGHHHIIIJJJ1231231231239209159107557407309409259158107757402.012.112.181.401.441.471.631.852.081.221.331.434.995.155.172.682.752.804.264.474.622.252.442.66747475696971727379697073Accessories EC-SYSTEMS ESM40200 4000 8000120005000 10000 15000 20000 2500011H16000 [CFM][m 3 /h]Technology-10˚-5˚ 0˚+ 5˚Drawingsp. 118 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.115Contacts

AC axial fansS series, Ø 800– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*8D 800*8D 800*8D 800M8D 138-HFM8D 138-LAM8D 138-LA-5°+5°0°ACE3~ 400 ∆3~ 400 ∆3~ 400 ∆5050506806656600.791.050.982.152.702.41———10080105-40 to +55-40 to +70-40 to +65BDF3~ 400 Y3~ 400 Y3~ 400 Y5050505405005150.480.630.571.051.311.21———604557-40 to +55-40 to +70-40 to +65F1b)/F2b)F1b)/F2b)F1b)/F2b)*ZD 800 MZD 138-HF 0°G 3~ 400 ∆ 50 435 0.37 1.15 — 44 -40 to +80H 3~ 400 Y 50 330 0.20 0.48 — 25 -40 to +80F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]100806040200,40,30,1 0,23333AF232BE221231 11C21D1AAABBBCCCDDDEEEFFF1231231231231231237006906806055755406806706655255105006906806605605305150.600.680.790.400.440.480.961.011.050.600.620.630.760.850.980.500.540.572.082.102.150.870.941.052.572.612.701.261.291.312.212.282.411.061.131.216767716463656869716363646767716362640 4000 8000120004000 8000 12000 16000 20000-10˚[CFM][m 3 /h]-5˚ 0˚+ 5˚116

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axialK seriesAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A8D 800-AN01 -01"A" A8D 800-AN01 -02"V" A8D 800-AT03 -01"A" A8D 800-AT03 -02"V""A"A8D 800-AJ01 -01A8D 800-AJ01 -02"V" AZD 800-AM03 -01"A" AZD 800-AM03 -02W8D 800-GN01 -01W8D 800-DN01 -02W8D 800-GT03 -01W8D 800-DT03 -02W8D 800-GJ01 -01W8D 800-DJ01 -02WZD 800-GM03 -01WZD 800-DM03 -02S8D 800-CN01 -01—S8D 800-CT03 -01—S8D 800-CJ01 -01—SZD 800-CM03 -01—S8D 800-AN01 -01—S8D 800-AT03 -01—S8D 800-AJ01 -01—SZD 800-AM03 -01——S8D 800-BN01 -02—S8D 800-BT03 -02—S8D 800-BJ01 -02—SZD 800-BM03 -02————————————————AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]454035302520150,05 0,1 0,1533H2G21GGGHHH1231234554454353753603300.310.330.370.170.180.201.091.101.150.430.450.48595861555555Accessories EC-SYSTEMS ESM10150 2000 400060002000 4000 6000 8000 10000 12000[CFM][m 3 /h]Technology-10˚-5˚0˚Drawingsp. 118 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.117Contacts

AC axial fansS series, Ø 800, drawings for direction of air flow "V"Without attachments18499x99c±3d±2788 ±2162±0.3TypeA6D 800-AN01 -01A6D 800-AO01 -01A6D 800-AJ01 -01A6D 800-AS01 -01A6D 800-AP01 -01A8D 800-AN01 -01A8D 800-AT03 -01A8D 800-AJ01 -01AZD 800-AM03 -01Mass[kg]22.022.026.029.029.022.026.026.022.0c d g147.0 133.0 251.0142.0 118.0 251.0152.0 147.0 276.0157.0 162.0 296.0152.0 147.0 296.0147.0 133.0 251.0157.0 162.0 276.0152.0 147.0 276.0152.0 147.0 251.0Cable gland75g±2❮ "V"8 x M10Depth of screwmax. 18 mmWith full square nozzle857260 ±5TypeW6D 800-GN01 -01W6D 800-GO01 -01W6D 800-GJ01 -01W6D 800-GS01 -01W6D 800-GP01 -01W8D 800-GN01 -01W8D 800-GT03 -01W8D 800-GJ01 -01WZD 800-GM03 -01Mass[kg]42.042.046.049.049.042.046.046.042.0Ø14,5190❮ "V"17910 ±1970 -3With guard grille for full nozzle816±1861View X157,56815,59226TypeS6D 800-CN01 -01S6D 800-CO01 -01S6D 800-CJ01 -01S6D 800-CS01 -01S6D 800-CP01 -01S8D 800-CN01 -01S8D 800-CT03 -01S8D 800-CJ01 -01SZD 800-CM03 -01Mass[kg]32.032.036.039.039.032.036.036.032.0s136.5131.5141.5146.5141.5136.5146.5141.5141.5t165.5165.5190.5210.5210.5165.5190.5190.5165.585,5±3s ±4t ±3❮ "V"118

GeneralinformationWith guard grille for short nozzleu±4Ø929Ø960TypeS6D 800-AN01 -01S6D 800-AO01 -01S6D 800-AJ01 -01S6D 800-AS01 -01S6D 800-AP01 -01S8D 800-AN01 -01S8D 800-AT03 -01S8D 800-AJ01 -01SZD 800-AM03 -01Mass[kg]34.034.038.041.041.034.038.038.034.0u17.017.027.032.027.022.032.027.017.0v51.051.076.096.096.051.076.076.051.0AC axial fansAC axialS seriesAC axialK series410200±3v±3❮ "V"AC axialA seriesIn-line duct fan9924x15˚TypeMass[kg]W6D 800-IJ01 -01 43.8EC axial fans44Q-motorTechnologyAccessoriesEC-SYSTEMSESMØ797Ø875EC axialS series280Ø83724xØ11,5❮ "V"119Contacts

AC axial fansS series, Ø 800, drawings for direction of air flow "A"Without attachments18499x99c±3d±2788 ±2TypeA6D 800-AN01 -02A6D 800-AO01 -02A6D 800-AJ01 -02A6D 800-AS01 -02A6D 800-AP01 -02A8D 800-AN01 -02A8D 800-AT03 -02A8D 800-AJ01 -02AZD 800-AM03 -02Mass[kg]22.022.026.029.029.022.026.026.022.0c d g175.0 133.0 251.0165.0 188.0 251.0185.0 147.0 276.0194.0 162.0 296.0185.0 147.0 296.0175.0 133.0 251.0194.0 162.0 276.0185.0 147.0 276.0185.0 147.0 251.0162±0.3Cable gland75g±2"A" ❯8 x M10Depth of screwmax. 18 mmWith full square nozzle268±5Ø857TypeW6D 800-DN01 -02W6D 800-DO01 -02W6D 800-DJ01 -02W6D 800-DS01 -02W6D 800-DP01 -02W8D 800-DN01 -02W8D 800-DT03 -02W8D 800-DJ01 -02WZD 800-DM03 -02Mass[kg]43.543.547.550.550.543.547.547.543.5Ø14,517190"A" ❯910±1970-3With guard grille for full nozzle4 s±4Ø905,5Ø960TypeS6D 800-BN01 -02S6D 800-BO01 -02S6D 800-BJ01 -02S6D 800-BS01 -02S6D 800-BP01 -02S8D 800-BN01 -02S8D 800-BT03 -02S8D 800-BJ01 -02SZD 800-BM03 -02Mass[kg]33.033.037.040.040.034.037.037.034.0s172.0162.0182.0191.0182.0172.0191.0182.0182.0t173.0173.0198.0218.0218.0173.0198.0198.0173.078±3 t±310"A" ❯120

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation121Contacts

AC axial fansS series, Ø 910– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*6D 910 M6D 138-HF -10°A 3~ 400 ∆ 50 880 1.30 2.75 — 150 -40 to +60B 3~ 400 Y 50 670 0.81 1.56 — 85 -40 to +60F1b)/F2b)*6D 910 M6D 138-LA -5°C 3~ 400 ∆ 50 900 1.84 3.76 — 150 -40 to +60D 3~ 400 Y 50 700 1.20 2.24 — 88 -40 to +60F1b)/F2b)*6D 910 M6D 138-LA -10°E 3~ 400 ∆ 50 930 1.41 3.20 — 165 -40 to +75F 3~ 400 Y 50 780 1.03 1.90 — 115 -40 to +75F1b)/F2b)*6D 910*6D 910*6D 910M6D 138-NAM6D 138-NAM6D 138-NA0°-5°-10°GIK3~ 400 ∆3~ 400 ∆3~ 400 ∆5050508909209402.451.961.535.204.504.45———160170170-40 to +50-40 to +60-40 to +70HJL3~ 400 Y3~ 400 Y3~ 400 Y5050506857608301.561.371.142.902.552.15———95115130-40 to +50-40 to +60-40 to +70F1b)/F2b)F1b)/F2b)F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H2O]1601401201008060400,2 0,4 0,63BE33FA33 2222213C21 1111AAABBBCCCDDDEEE1231231231231239108908807407006709209109007457207009459359301.061.211.300.720.780.811.591.721.841.101.151.201.111.271.412.562.722.751.361.471.563.513.673.762.012.112.242.913.083.2077788272727476777971717278798320DFFF1238408057800.850.961.031.561.741.907575780 4000 8000120005000 10000 15000 20000 25000-10˚-5˚16000 [CFM][m 3 /h]0˚122

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axial fansAC axialS seriesDirection of air flowAC axialK series❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A6D 910-AO01 -01"A" A6D 910-AO01 -02"V" A6D 910-AK01 -01"A" A6D 910-AK01 -02"V" A6D 910-AL01 -01"A" A6D 910-AL01 -02"V" A6D 910-AP01 -01"A" A6D 910-AP01 -02"V" A6D 910-AQ01 -01"A" A6D 910-AQ01 -02"V""A"A6D 910-AR01 -01A6D 910-AR01 -02W6D 910-GO01 -01W6D 910-DO01 -02W6D 910-GK01 -01W6D 910-DK01 -02W6D 910-GL01 -01W6D 910-DL01 -02W6D 910-GP01 -01W6D 910-DP01 -02W6D 910-GQ01 -01W6D 910-DQ01 -02W6D 910-GR01 -01W6D 910-DR01 -02S6D 910-CO01 -01—S6D 910-CK01 -01—S6D 910-CL01 -01—S6D 910-CP01 -01—S6D 910-CQ01 -01—S6D 910-CR01 -01—S6D 910-AO01 -01—S6D 910-AK01 -01—S6D 910-AL01 -01—S6D 910-AP01 -01—S6D 910-AQ01 -01—S6D 910-AR01 -01——S6D 910-BO01 -02—S6D 910-BK01 -02—S6D 910-BL01 -02—S6D 910-BP01 -02—S6D 910-BQ01 -02—S6D 910-BR01 -02————————————————————————AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H2O]18033GGG1239209058901.992.242.454.654.955.20767679ESM1601401201008060400,2 0,4 0,63K23J232L132I121G1H21HHHIIIJJJKKK1231231231237607256859409309208107807609609509401.391.491.561.641.821.961.201.301.371.241.401.532.572.762.904.334.514.502.232.402.554.274.354.45727072777880737375788083Accessories EC-SYSTEMS2010 4000 800012000160005000 10000 15000 20000 25000 30000[CFM][m 3 /h]LLL1238758508300.941.051.141.791.972.15767780Technology-10˚-5˚0˚Drawingsp. 126 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.123Contacts

AC axial fansS series, Ø 910– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Encased in aluminium– Number of blades: 5– Direction of rotation: Direction of air flow "V" clockwise, direction of air flow "A"counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Any– Condensate discharge holes: On rotor and stator side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominal voltageFrequencySpeed/rpm (1)Max. powerinput (1)Max. currentdraw (1)CapacitorMax. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A µF/VDB Pa °Cp. 416 f.*8D 910*8D 910M8D 138-HFM8D 138-LA-5°0°AC3~ 400 ∆3~ 400 ∆50506456650.851.112.092.70——9090-40 to +60-40 to +65BD3~ 400 Y3~ 400 Y50504504950.450.681.001.36——4350-40 to +60-40 to +65F1b)/F2b)F1b)/F2b)*ZD 910MZD 138-HF 0°E 3~ 400 ∆ 50 425 0.42 1.15 — 40 -40 to +70F 3~ 400 Y 50 315 0.22 0.50 — 21 -40 to +70F1b)/F2b)*ZD 910 MZD 138-HF -5°G 3~ 400 ∆ 50 430 0.32 0.86 — 42 -40 to +100H 3~ 400 Y 50 320 0.17 0.40 — 22 -40 to +100F1b)/F2b)subject to alterations(1) Nominal data in operating point 3 with maximum loadCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)][Pa][in H 2O]903 3AAA1236706556450.730.800.851.942.032.09686869807060504030200,1 0,2 0,3332B12A2D112C1BBBCCCDDD1231231235004604506856756655405154950.430.440.450.941.031.110.620.650.680.950.991.002.492.572.701.231.301.36626060696971646364100 2000 4000 6000 800010000 120004000 8000 12000 16000 20000-10˚-5˚[CFM][m 3 /h]0˚124

Generalinformation– Motor protection: Design with thermal overload protector– Cable exit: Via terminal box– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE (acc. to EN 60034)AC axialK seriesAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯ "A" ❯ ❮ "V"WithoutattachmentsWith fullsquare nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleWith guard grillefor full nozzleWith guard grillefor short nozzleIn-line duct fan"V" A8D 910-AN07 -01"A" A8D 910-AN07 -02"V" A8D 910-AJ03 -01"A" A8D 910-AJ03 -02"V" AZD 910-AM03 -01"A" AZD 910-AM03 -02"V""A"AZD 910-AN05 -01AZD 910-AN05 -02W8D 910-GN07 -01W8D 910-DN07 -02W8D 910-GJ03 -01W8D 910-DJ03 -02WZD 910-GM03 -01WZD 910-DM03 -02WZD 910-GN05 -01WZD 910-DN05 -02S8D 910-CN07 -01—S8D 910-CJ03 -01—SZD 910-CM03 -01—SZD 910-CN05 -01—S8D 910-AN07 -01—S8D 910-AJ03 -01—SZD 910-AM03 -01—SZD 910-AN05 -01——S8D 910-BN07 -02—S8D 910-BJ03 -02—SZD 910-BM03 -02—SZD 910-BN05 -02————————————————AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)]Q-motor[Pa][in H 2O]45403530252015100,05 0,1 0,15H33323G2F211E211EEEFFFGGGHHH1231231231234454354253453303154504404303603403200.360.390.420.200.210.220.270.290.320.160.170.171.111.131.150.460.480.500.810.840.860.360.380.40615961545353605961545353ESMEC-SYSTEMSAccessories50 2000 4000 600080002000 4000 6000 8000 10000 12000 14000[CFM][m 3 /h]Technology-10˚-5˚0˚Drawingsp. 126 ff.Speed settingp. 384 f.Motor protectionp. 386 ff.Electr. connectionsp. 416 f.125Contacts

AC axial fansS series, Ø 910, drawings for direction of air flow "V"Without attachments18499x99c±3d±2905 ±2162±0.3TypeA6D 910-AO01 -01A6D 910-AK01 -01A6D 910-AL01 -01A6D 910-AP01 -01A6D 910-AQ01 -01A6D 910-AR01 -01A8D 910-AN07 -01A8D 910-AJ03 -01AZD 910-AM03 -01AZD 910-AN05 -01Mass[kg]22.027.027.030.030.030.022.027.022.022.0c d g147.0 104.0 251.0152.0 115.0 276.0147.0 104.0 276.0156.0 123.0 296.0152.0 115.0 296.0147.0 104.0 296.0152.0 115.0 251.0156.0 123.0 276.0157.0 123.0 251.0152.0 115.0 251.0Cable gland75g±2❮ "V"8 x M10Depth of screwmax. 18 mmWith full square nozzle976277 ±5TypeW6D 910-GO01 -01W6D 910-GK01 -01W6D 910-GL01 -01W6D 910-GP01 -01W6D 910-GQ01 -01W6D 910-GR01 -01W8D 910-GN07 -01W8D 910-GJ03 -01WZD 910-GM03 -01WZD 910-GN05 -01Mass[kg]42.047.047.050.050.050.042.047.042.042.0Ø14,5205❮ "V"201010 ±11070-3With guard grille for full nozzle931±1975View X1510762011629TypeS6D 910-CO01 -01S6D 910-CK01 -01S6D 910-CL01 -01S6D 910-CP01 -01S6D 910-CQ01 -01S6D 910-CR01 -01S8D 910-CN07 -01S8D 910-CJ03 -01SZD 910-CM03 -01SZD 910-CN05 -01Mass[kg]33.038.038.041.041.041.033.038.033.033.0s134.0139.0134.0143.0139.0134.0139.0143.0143.0139.0t163.0188.0188.0208.0208.0208.0163.0188.0163.0163.088 ±3s ±4t ±3❮ "V"126

GeneralinformationWith guard grille for short nozzleu±4Ø1044Ø1075TypeS6D 910-AO01 -01S6D 910-AK01 -01S6D 910-AL01 -01S6D 910-AP01 -01S6D 910-AQ01 -01S6D 910-AR01 -01S8D 910-AN07 -01S8D 910-AJ03 -01SZD 910-CM03 -01SZD 910-CN05 -01Mass[kg]35.040.040.043.043.043.035.040.035.035.0u17.022.017.026.022.017.022.026.026.022.0v46.071.071.091.091.091.046.071.046.046.0AC axial fansAC axialS seriesAC axialK series410205±3v±3❮ "V"TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans127Contacts

AC axial fansS series, Ø 910, drawings for direction of air flow "A"Without attachments18499x99c±3d±2905 ±2162±0.3TypeA6D 910-AO01 -02A6D 910-AK01 -02A6D 910-AL01 -02A6D 910-AP01 -02A6D 910-AQ01 -02A6D 910-AR01 -02A8D 910-AN07 -02A8D 910-AJ03 -02AZD 910-AM03 -02AZD 910-AN05 -02Mass[kg]22.027.027.030.030.030.022.027.022.022.0c d g145.0 104.0 251.0154.0 115.0 276.0145.0 104.0 276.0157.0 123.0 296.0154.0 115.0 296.0145.0 104.0 296.0154.0 115.0 251.0157.0 123.0 276.0157.0 123.0 251.0154.0 115.0 251.0Cable gland75g±2"A" ❯8 x M10Depth of screwmax. 18 mmWith full square nozzle267±5Ø976TypeW6D 910-DO01 -02W6D 910-DK01 -02W6D 910-DL01 -02W6D 910-DP01 -02W6D 910-DQ01 -02W6D 910-DR01 -02W8D 910-DN07 -02W8D 910-DJ03 -02WZD 910-DM03 -02WZD 910-DN05 -02Mass[kg]43.548.548.551.551.551.543.548.543.543.5Ø14,520205"A" ❯1010±11070-3With guard grille for full nozzle4 s±4Ø1017Ø1075TypeS6D 910-BO01 -02S6D 910-BK01 -02S6D 910-BL01 -02S6D 910-BP01 -02S6D 910-BQ01 -02S6D 910-BR01 -02S8D 910-BN07 -02S8D 910-BJ03 -02SZD 910-BM03 -02SZD 910-BN05 -02Mass[kg]34.039.039.042.042.042.034.039.034.034.0s159.0168.0159.0171.0168.0159.0168.0171.0171.0168.0t195.0215.0215.0235.0235.0235.0195.0215.0195.0195.061±3 t±310"A" ❯128

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation129Contacts

130

AC axial fans K seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesGeneralinformationAC axialK seriesEC axial fansAC axialA seriesAC axialS seriesAC axial fansAC axial fans, K series Ø 250 - Ø 450 132131Contacts

AC axial fansK series, Ø 250 / 300– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4E 250 M4E 068-BF A1~ 230 50 800 1350 41 0.18 1.5 /400 47 60 -25 to +601~ 230 60 910 1550 50 0.23 1.5 /400 50 60 -25 to +701.2 A1)*4E 300-*E M4E 068-BF B 1~ 230 50 1100 1100 52 0.23 1.5 /400 53 50 -25 to +451~ 230 60 1150 1150 60 0.27 1.5 /400 54 50 -25 to +401.3 A1)*4E 300-*H M4E 068-CF C 1~ 230 50 1340 1350 70 0.31 1.5 /400 58 80 -25 to +601~ 230 60 1460 1480 90 0.40 1.5 /400 61 65 -25 to +551.7 A1)subject to alterationsCurvesn[rpm]P 1[W]I[A][Pa]8060400,1 0,2 0,3 [in H 2O]2AAA121315128042440.190.202010 100 200 300 400 500 [CFM]200 400 600 80050 Hz[m 3 /h]60 Hz132

Generalinformation– Motor protection: TOP wired internally– Cable exit: A C Axial, B variable– Protection class: I– Product conforming to standards: EN 60335-1, CEAC axial fansDirection of air flowAC axialK seriesAC axialS series❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzle"V""A"A4E 250-AE32 -05A4E 250-AE32 -06"V" A4E 300-AE20 -05"A" A4E 300-AE20 -06"V" A4E 300-AH26 -05"A" A4E 300-AH26 -06S4E 250-AE32 -01S4E 250-AE32 -02S4E 300-EE20 -05S4E 300-EE20 -06S4E 300-EH26 -05S4E 300-EH26 -06AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]806040201,0 0,2 0,3 [in H 2O]2B2C1 1BBCC1212106098513251310535571730.240.240.320.33Accessories EC-SYSTEMS ESM0 200 400 600 [CFM]300 600 900 1200 [m 3 /h]50 Hz 60 HzTechnologyDrawingsp. 134 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.133Contacts

AC axial fansK series, Ø 250 / 300, drawings of directions of air flow "V" and "A"Without attachments- 0 +c1 ±3Brass lead tips2 j ±3Depth of screwmax. 5 mmM4TypeA4E 250-AE32 -05A4E 250-AE32 -06A4E 300-AE20 -05A4E 300-AE20 -06A4E 300-AH26 -05A4E 300-AH26 -06"V""A""V""A""V""A"a68.068.075.075.075.075.0b250.0250.0294.0294.0294.0294.0c 1-9.0-2.0-9.0-3.0-4.0-4.0j63.063.063.063.073.073.0685Ø27450Ø92Øb27,54x90˚a ±358❮ "V""A" ❯Installation arrangementt❮ "V"Ø xTypewithout attachmentsA4E 250-AE32 -05A4E 250-AE32 -06A4E 300-AE20 -05A4E 300-AE20 -06A4E 300-AH26 -05A4E 300-AH26 -06Typewithout guard grilleS4E 250-AE32 -01S4E 250-AE32 -02S4E 300-EE20 -05S4E 300-EE20 -06S4E 300-EH26 -05S4E 300-EH26 -06"V""A""V""A""V""A"t32.032.038.038.038.038.0x260.0260.0306.0306.0306.0306.0"A" ❯t134

With guard grille for short nozzleuvwTypeS4E 250-AE32 -01S4E 250-AE32 -02S4E 300-EE20 -05S4E 300-EE20 -06S4E 300-EH26 -05S4E 300-EH26 -06"V""A""V""A""V""A"c 225.036.066.072.071.071.0f271.0271.0————r300.0300.0360.0360.0360.0360.0s13.513.512.512.512.512.5u67.567.530.030.030.030.0v4.54.54.04.04.04.0w33.533.526.026.026.026.0AC axial fansfAC axialS seriesrAC axialK seriesGeneralinformationc2 ±5 4,5❮ "V"s"A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans135Contacts

AC axial fansK series, Ø 350– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 7– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4E 350 M4E 068-DCsubject to alterations1~ 230 50 2390 1350 105 0.50 3.0 /400 63 80 -25 to +50A1~ 230 60 2650 1500 135 0.60 3.0 /400 66 60 -25 to +402.0A1)Curvesn[rpm]P 1[W]I[A][Pa]8060400,1 0,2 0,3 [in H 2O]2AAA12133513001101200.520.562010 300 600 900 1200 1500 [CFM]600 1200 1800 240050 Hz[m 3 /h]60 Hz136

– Motor protection: TOP wired internally– Cable exit: Axial– Protection class: I– Product conforming to standards: EN 60335-1, CEDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzleAC axial fans"V" A4E 350-AF20 -05"A" A4E 350-AF20 -06S4E 350-AF20 -01S4E 350-AF20 -02TechnologyAC axialA seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesEC axial fansAC axialS seriesGeneralinformationDrawingsp. 138 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.137Contacts

AC axial fansK series, Ø 350, drawings of directions of air flow "V" and "A"Without attachmentsc1±3Depth of screwmax. 5 mmTypeA4E 350-AF20 -05A4E 350-AF20 -06"V""A"c 118.028.0Brass lead tips2 83±3M4Ø27685450Ø92Ø350-255±3Installation arrangement2026Ø35827,54x90˚58❮ "V""A" ❯Typewithout attachmentsA4E 350-AF20 -05A4E 350-AF20 -06Typewithout guard grilleS4E 350-AF20 -01S4E 350-AF20 -02"V""A"❮ "V""A" ❯2620138

With guard grille for short nozzle61,34,5TypeS4E 350-AF20 -01S4E 350-AF20 -02"V""A"c 219.029.0AC axialK series380AC axial fans422AC axialS seriesGeneralinformation❮ "V""A" ❯c2 ±56,515,5TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans139Contacts

AC axial fansK series, Ø 360– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 3– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsTypeMotor*6E 360 M6E 068-DFsubject to alterations[Pa]400,15 [in H 2O]300,10200,05Electr. connectionVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.1~ 230 50 2030 850 65 0.29 2.5 /400 46 40 -25 to +50A1~ 230 60 2290 960 85 0.38 2.5 /400 51 40 -25 to +402.0A1)Curvesn[rpm]P 1[W]I[A]AA1285082065670.290.302A1010 250 500 750 1000 1250 [CFM]400 800 1200 1600 200050 Hz[m 3 /h]60 Hz140

– Motor protection: TOP wired internally– Cable exit: Axial– Protection class: I– Product conforming to standards: EN 60335-1, CEDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzleAC axial fans"V" A6E 360-AE08 -01"A" A6E 360-AE08 -02S6E 360-AE08 -01—TechnologyAC axialA seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesEC axial fansAC axialS seriesGeneralinformationDrawingsp. 142 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.141Contacts

AC axial fansK series, Ø 360, drawings of directions of air flow "V" and "A"Without attachments- 0 +c1±3Depth of screwmax. 5 mmTypeA6E 360-AE08 -01A6E 360-AE08 -02"V""A"c 113.0-42.0Brass lead tipsØ292,5685450Ø92±2Ø36027,5M44x90˚83 ±3125 ±3❮ "V""A" ❯58 ±0,1Installation arrangement97Typewithout attachmentsA6E 360-AE08 -01A6E 360-AE08 -02Typewithout guard grilleS6E 360-AE08 -01—"V""A"❮ "V"Ø370"A" ❯97142

With guard grille for short nozzle214,517Typec 2S6E 360-AE08 -01 "V" 134.0AC axial fansAC axialK seriesAC axialS series400Generalinformation❮ "V"c2±5 6,515,5TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans143Contacts

AC axial fansK series, Ø 360– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 4– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsTypeMotor*4E 360 M4E 068-DF*6E 360 M6E 068-DFsubject to alterationsCurvesn[rpm]P 1[W]I[A][Pa]60500,20 [in H 2O]131013008407901161196671400,152 2300,10Electr. connectionVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.AB1~ 230 50 2275 1320 115 0.54 3.0 /400 55 55 -25 to +401~ 230 60 2440 1430 145 0.64 3.0 /400 57 40 -25 to +401~ 230 50 1850 850 65 0.29 2.5 /400 49 50 -25 to +551~ 230 60 2060 960 85 0.38 2.5 /400 52 40 -25 to +452.12.2A1)A1)AABB12120.550.570.290.31201 1100,05BA0 250 500750 1000 1250 [CFM]400 800 1200 1600 200050 Hz[m 3 /h]60 Hz144

– Motor protection: TOP wired internally– Cable exit: Axial– Protection class: I– Product conforming to standards: EN 60335-1, CEAC axial fansDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzle"V""A"A4E 360-AC20 -05A4E 360-AC20 -06"V" A6E 360-AA08 -05"A" A6E 360-AA08 -06S4E 360-EC20 -05—S6E 360-EA08 -05—TechnologyAC axialA seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesEC axial fansAC axialS seriesGeneralinformationDrawingsp. 146 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.145Contacts

AC axial fansK series, Ø 360, drawings of directions of air flow "V" and "A"Without attachments- 0 +c1±3Brass lead tips2,5 83±3M4Depth of screwmax. 5 mmTypeA4E 360-AC20 -05A4E 360-AC20 -06A6E 360-AA08 -05A6E 360-AA08 -06"V""A""V""A"c 18.0-8.0-11.0-8.0h84.084.0103.0103.0Ø29685450Ø92Ø360 ±227,54x90˚h±358❮ "V""A" ❯Installation arrangementl❮ "V"Typewithout attachmentsA4E 360-AC20 -05A4E 360-AC20 -06A6E 360-AA08 -05A6E 360-AA08 -06Typewithout guard grilleS4E 360-EC20 -05—S6E 360-EA08 -05—"V""A""V""A"l43.043.065.065.0Ø370"A" ❯l146

With guard grille for short nozzle245TypeS4E 360-EC20 -05S6E 360-EA08 -05"V""V"c 288.065.0AC axial fans4AC axialS seriesAC axialK series400Generalinformationc2❮ "V"±5 6,616,6AC axialA seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans147Contacts

AC axial fansK series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 3– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*6E 450-AF M6E 074-EIA1~ 230 50 4565 890 140 0.62 4.0 /400 57 45 -25 to +453.7A1)*6E 450-AG M6E 074-GAB1~ 230 50 4550 890 142 0.65 4.0 /400 57 45 -25 to +501~ 230 60 5050 990 190 0.84 4.0 /400 61 50 -25 to +404.2A1)subject to alterationsCurvesn[rpm]P 1[W]I[A][Pa]500,20 [in H 2O]AABB12128908708808601471551511600.650.680.680.71B2400,15300,10201100,05A0 1000 2000 [CFM]1000 2000 3000 4000[m 3 /h]50 Hz60 Hz148

– Motor protection: TOP wired internally– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, CE– Approvals: CCC– Options: Terminal boxAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzle"V""A"A6E 450-AF08 -01A6E 450-AF08 -02"V" A6E 450-AG05 -01"A" A6E 450-AG05 -02S6E 450-AF08 -01—S6E 450-AG05 -01—TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesGeneralinformationAC axialA seriesEC axial fansDrawingsp. 150 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.149Contacts

AC axial fansK series, Ø 450, drawings of directions of air flow "V" and "A"Without attachments- 0 +c1±2Depth of screwmax. 10 mmTypeA6E 450-AF08 -01A6E 450-AF08 -02A6E 450-AG05 -01A6E 450-AG05 -02"V""A""V""A"a c 1117.0 4.0117.0 -18.0129.0 4.0129.0 -18.05a±1M6Ø75Ø 102Ø 446374x90˚±1600±20685Brass lead tips144 ±2❮ "V""A" ❯90±0,2Installation arrangement11010-40❮ "V"Typewithout attachmentsA6E 450-AF08 -01A6E 450-AF08 -02A6E 450-AG05 -01A6E 450-AG05 -02Typewithout guard grilleS6E 450-AF08 -01—S6E 450-AG05 -01—"V""A""V""A"Ø460"A" ❯10-40110150

With guard grille for short nozzle8059TypeS6E 450-AF08 -01S6E 450-AG05 -01"V""V"c 298.098.0AC axial fans30476522AC axialS seriesAC axialK seriesGeneralinformationc2±5❮ "V"TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans151Contacts

AC axial fansK series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticBlades: PA plastic, blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*6E 450 M6E 074-EI1~ 230 50 4415 900 145 0.64 4.0 /400 61 45 -25 to +55A 3.7A1)subject to alterationsCurvesn[rpm]P 1[W]I[A][Pa]500,20 [in H 2O]AA128808501511600.660.70400,15230A0,10201100,050 500 1000 1500 2000 2500 [CFM]1000 2000 3000 4000[m 3 /h]152

– Motor protection: TOP wired internally– Cable exit: Lateral– Protection class: I– Product conforming to standards: EN 60335-1, CE– Options: Terminal boxDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith guard grilleattachments for short nozzleAC axial fansAC axialS series"V" A6E 450-AN08 -01"A" A6E 450-AN08 -02S6E 450-BN08 -01S6E 450-BN08 -02TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesGeneralinformationAC axialA seriesEC axial fansDrawingsp. 154 f.Guard grillep. 366Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.153Contacts

AC axial fansK series, Ø 450, drawings of directions of air flow "V" and "A"Without attachments- 0 +c1±2Depth of screwmax. 10 mmTypeA6E 450-AN08 -01A6E 450-AN08 -02"V""A"c 18.025.05122 ±1M6856006Ø75Ø102Ø446 ±24x90˚92±190±0,2Brass lead tips❮ "V""A" ❯Installation arrangement100Typewithout attachmentsA6E 450-AN08 -01A6E 450-AN08 -02Typewithout guard grilleS6E 450-BN08 -01S6E 450-BN08 -02"V""A"20❮ "V"Ø45220"A" ❯100154

With guard grille for short nozzle305TypeS6E 450-BN08 -01S6E 450-BN08 -02"V""A"c 2100.0117.0476522AC axial fansAC axialK seriesAC axialS seriesGeneralinformationc2 ±5❮ "V""A" ❯919TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans155Contacts

156

AC axial fans A seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axialS seriesAC axial fansAC axial fans, A series Ø 200 - Ø 350 158157Contacts

AC axial fansA series, Ø 200– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 200 (1) M2D 068-CF*2E 200 M2E 068-CA*4D 200 (1) M4D 068-CF*4S 200 M4S 068-BFABCD3~ 230/400 50 830 2800 53 0.26/0.15 — 67 140 -25 to +753~ 230/400 60 940 3150 70 0.24/0.14 — 70 140 -25 to +751~ 230 50 740 2740 50 0.24 1.5 /400 65 200 -25 to +751~ 230 60 830 3120 61 0.28 1.5 /400 69 200 -25 to +753~ 230/400 50 390 1450 22 0.16/0.09 — 51 70 -25 to +603~ 230/400 60 460 1730 21 0.12/0.07 — 55 100 -25 to +801~ 230 50 375 1380 40 0.30 — 52 60 -25 to +501~ 230 60 445 1630 34 0.24 — 53 80 -25 to +651.71.41.51.2C1)/C2)A1)C1)/C2)B)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]24020016012080400,2 0,4 0,60,8 [in H 2O]22AB1 1AABB12122785277026702670535551500.150.150.240.240 100 200 300400 [CFM]200 400 60050 Hz[m 3 /h]60 Hz158

– Motor protection: A C Without TOP, B D TOP wired internally– Cable exit: A C D Lateral, B variable– Protection class: I– Product conforming to standards: EN 60335-1, B D also CE– Approvals: B CCCAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grilleattachments round nozzle for full nozzle"V""A"A2D 200-AA02 -01A2D 200-AA02 -02"V" A2E 200-AF02 -01"A" A2E 200-AF02 -02"V" A4D 200-AA04 -01"A" A4D 200-AA04 -02"V" A4S 200-AA02 -01"A" A4S 200-AA02 -02W2D 200-CA02 -01W2D 200-CA02 -02W2E 200-CF02 -01W2E 200-CF02 -02W4D 200-CA04 -01W4D 200-CA04 -02W4S 200-CA02 -01W4S 200-CA02 -02S2D 200-BA02 -01S2D 200-BA02 -02S2E 200-BF02 -01S2E 200-BF02 -02S4D 200-BA04 -01S4D 200-BA04 -02S4S 200-BA02 -01S4S 200-BA02 -02AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]100806040200,1 0,20,3 0,4 [in H 2O]D2C20 50 100 150 200 250 [CFM]100 200 300 4001[m 3 /h]CCDD12121460146013751380242440390.090.090.300.29Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 160Guard grillep. 365Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.159Contacts

AC axial fansA series, Ø 200, drawings of directions of air flow "V" and "A"Without attachmentsØ27±0,12 73±3Ø92450 ±20Ø195-258Depth of screwmax. 5 mmM4TypeA2D 200-AA02 -01A2D 200-AA02 -02A2E 200-AF02 -01A2E 200-AF02 -02A4D 200-AA04 -01A4D 200-AA04 -02A4S 200-AA02 -01A4S 200-AA02 -02"V""A""V""A""V""A""V""A"c21.021.021.021.020.020.020.020.0c ±3 33±3❮ "V""A" ❯Brass lead tipsWith full round nozzleType9 8061,25Ø 200Ø 28015˚6x60˚250W2D 200-CA02 -01W2D 200-CA02 -02W2E 200-CF02 -01W2E 200-CF02 -02W4D 200-CA04 -01W4D 200-CA04 -02W4S 200-CA02 -01W4S 200-CA02 -02"V""A""V""A""V""A""V""A"45˚❮ "V""A" ❯7With guard grille for full nozzle12,54 73±34,5TypeS2D 200-BA02 -01S2D 200-BA02 -02S2E 200-BF02 -01S2E 200-BF02 -02S4D 200-BA04 -01S4D 200-BA04 -02S4S 200-BA02 -01S4S 200-BA02 -02"V""A""V""A""V""A""V""A"❮ "V""A" ❯245160

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation161Contacts

AC axial fansA series, Ø 250– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 250 (1) M2D 068-DF*2E 250 M2E 068-DF*4D 250 (1) M4D 068-CF*4S 250 M4S 068-CFABCD3~ 230/400 50 1685 2650 110 0.38/0.22 — 72 300 -25 to +703~ 230/400 60 1845 2950 160 0.45/0.26 — 75 300 -25 to +401~ 230 50 1610 2550 115 0.51 4.0 /400 72 150 -25 to +551~ 230 60 1740 2750 165 0.74 4.0 /400 73 130 -25 to +503~ 230/400 50 890 1420 30 0.16/0.09 — 58 90 -25 to +753~ 230/400 60 1035 1650 35 0.14/0.08 — 62 100 -25 to +751~ 230 50 870 1400 72 0.53 — 58 80 -25 to +401~ 230 60 1000 1620 67 0.46 — 62 100 -25 to +502.22.21.61.7C1)/C2)A1)C1)/C2)B)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]3002000,5 1,0 [in H 2O]AAABB121226452615252024801231311221260.230.240.540.55100B221 10 250 500 7501000 [CFM]400 800 1200 160050 Hz[m 3 /h]60 Hz162

– Motor protection: A C Without TOP, B D TOP wired internally– Cable exit: A C D Lateral, B variable– Protection class: I– Product conforming to standards: EN 60335-1, B D also CE– Approvals: A B CCCAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grilleattachments round nozzle for full nozzle"V""A"A2D 250-AA02 -01A2D 250-AA02 -02"V" A2E 250-AE65 -01"A" A2E 250-AE65 -02"V" A4D 250-AA04 -01"A" A4D 250-AA04 -02"V" A4S 250-AA02 -01"A" A4S 250-AA02 -02W2D 250-CA02 -01W2D 250-CA02 -02W2E 250-CE65 -01W2E 250-CE65 -02W4D 250-CA04 -01W4D 250-CA04 -02W4S 250-CA02 -01W4S 250-CA02 -02S2D 250-BA02 -01S2D 250-BA02 -02S2E 250-BE65 -01S2E 250-BE65 -02S4D 250-BA04 -01S4D 250-BA04 -02S4S 250-BA02 -01S4S 250-BA02 -02AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]100806040200,1 0,2 0,30,4 [in H 2O]C0 200 400 600 [CFM]2D200 400 600 800 10001[m 3 /h]CCDD12121420141014001395323370710.090.090.520.52Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 164Guard grillep. 365Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.163Contacts

AC axial fansA series, Ø 250, drawings of directions of air flow "V" and "A"Without attachments450 ±20Ø27±0,12 a±3Ø92Ø250-258Depth of screwmax. 5 mmM4TypeA2D 250-AA02 -01A2D 250-AA02 -02A2E 250-AE65 -01A2E 250-AE65 -02A4D 250-AA04 -01A4D 250-AA04 -02A4S 250-AA02 -01A4S 250-AA02 -02"V""A""V""A""V""A""V""A"a83.083.083.083.073.073.073.073.0c27.027.027.027.019.019.019.019.0c ±3 39±3❮ "V""A" ❯Brass lead tipsWith full round nozzleType9 8561,25Ø 254Ø 32015˚6x60˚295W2D 250-CA02 -01W2D 250-CA02 -02W2E 250-CE65 -01W2E 250-CE65 -02W4D 250-CA04 -01W4D 250-CA04 -02W4S 250-CA02 -01W4S 250-CA02 -02"V""A""V""A""V""A""V""A"45˚❮ "V""A" ❯7With guard grille for full nozzle12,54 a±34,5TypeS2D 250-BA02 -01S2D 250-BA02 -02S2E 250-BE65 -01S2E 250-BE65 -02S4D 250-BA04 -01S4D 250-BA04 -02S4S 250-BA02 -01S4S 250-BA02 -02"V""A""V""A""V""A""V""A"a83.083.083.083.073.073.073.073.0290❮ "V""A" ❯164

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation165Contacts

AC axial fansA series, Ø 300– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*2D 300 (1) M2D 068-EC*2E 300 M2E 068-EC*4D 300 (1) M4D 068-DF*4E 300 M4E 068-DF*4S 300 M4S 068-DFABCDE3~ 230/400 50 2760 2650 180 0.54/0.31 — 76 150 -25 to +603~ 230/400 60 2940 2800 270 0.71/0.41 — 77 100 -25 to +401~ 230 50 2440 2650 140 0.62 5.0 /400 75 150 -25 to +551~ 230 60 2700 2900 190 0.83 5.0 /400 78 150 -25 to +503~ 230/400 50 1740 1370 85 0.36/0.21 — 66 100 -25 to +553~ 230/400 60 1910 1520 110 0.38/0.22 — 69 110 -25 to +401~ 230 50 1690 1350 95 0.44 3.0 /400 65 120 -25 to +451~ 230 60 1830 1450 105 0.47 2.0 /400 66 100 -25 to +401~ 230 50 1440 1380 94 0.67 — 62 75 -25 to +301~ 230 60 1600 1550 94 0.67 — 64 60 -25 to +402.72.52.32.32.1C1)/C2)A1)C1)/C2)A1)B)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]160120800,2 0,4 0,6 [in H 2O]22BAAABB121226102535260025301902201491620.320.350.660.71401 10 400 800 1200 [CFM]600 1200 1800 2400[m 3 /h]50 Hz 60 Hz166

– Motor protection: A C Without TOP, B D E TOP wired internally– Cable exit: A C E Lateral, B D variable– Protection class: I– Product conforming to standards: EN 60335-1, B D E also CE– Approvals: A C CCC, B GOSTAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grilleattachments round nozzle for full nozzle"V""A"A2D 300-AD02 -01A2D 300-AD02 -02"V" A2E 300-AC47 -01"A" A2E 300-AC47 -02"V" A4D 300-AA02 -01"A" A4D 300-AA02 -02"V" A4E 300-AA01 -01"A" A4E 300-AA01 -02"V" A4S 300-AA02 -01"A" A4S 300-AA02 -02W2D 300-CD02 -01W2D 300-CD02 -02W2E 300-CC47 -01W2E 300-CC47 -02W4D 300-CA02 -01W4D 300-CA02 -02W4E 300-CA01 -01W4E 300-CA01 -02W4S 300-CA02 -01W4S 300-CA02 -02S2D 300-BD02 -01S2D 300-BD02 -02S2E 300-BC47 -01S2E 300-BC47 -02S4D 300-BA02 -01S4D 300-BA02 -02S4E 300-BA01 -01S4E 300-BA01 -02S4S 300-BA02 -01S4S 300-BA02 -02AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Q-motor[Pa]120100806040200,1 0,2 0,30,4 [in H 2O]DC22 20 250 500 750 1000 [CFM]400 800 1200 1600E111[m 3 /h]CCDDEE12121213601345134513151375136086949610192940.210.220.430.450.670.67Technology Accessories EC-SYSTEMS ESM50 Hz60 HzDrawingsp. 168Guard grillep. 365Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.167Contacts

AC axial fansA series, Ø 300, drawings of directions of air flow "V" and "A"Without attachments450±20Ø27±0,12 a±3c ±3 b ±3Ø92Ø300 -258Depth of screwmax. 5 mmM4TypeA2D 300-AD02 -01A2D 300-AD02 -02A2E 300-AC47 -01A2E 300-AC47 -02A4D 300-AA02 -01A4D 300-AA02 -02A4E 300-AA01 -01A4E 300-AA01 -02A4S 300-AA02 -01A4S 300-AA02 -02"V""A""V""A""V""A""V""A""V""A"a b c101.0 30.0 32.0101.0 30.0 32.098.0 20.0 30.098.0 20.0 30.083.0 56.0 20.083.0 56.0 20.083.0 56.0 20.083.0 56.0 20.083.0 30.0 20.083.0 30.0 20.0❮ "V""A" ❯Brass lead tipsWith full round nozzleType101180Ø326Ø39715˚45˚6x60˚380W2D 300-CD02 -01W2D 300-CD02 -02W2E 300-CC47 -01W2E 300-CC47 -02W4D 300-CA02 -01W4D 300-CA02 -02W4E 300-CA01 -01W4E 300-CA01 -02W4S 300-CA02 -01W4S 300-CA02 -02"V""A""V""A""V""A""V""A""V""A"❮ "V""A" ❯9With guard grille for full nozzle84,54,5TypeS2D 300-BD02 -01S2D 300-BD02 -02S2E 300-BC47 -01S2E 300-BC47 -02S4D 300-BA02 -01S4D 300-BA02 -02S4E 300-BA01 -01S4E 300-BA01 -02S4S 300-BA02 -01S4S 300-BA02 -02"V""A""V""A""V""A""V""A""V""A"h64.064.050.037.073.073.073.073.052.052.0h360❮ "V""A" ❯168

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation169Contacts

AC axial fansA series, Ø 315– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 315 (1) M4D 068-EC*4E 315 M4E 068-ECAB3~ 230/400 50 1990 1400 78 0.33/0.19 — 65 150 -25 to +803~ 230/400 60 2260 1590 115 0.36/0.21 — 68 150 -25 to +601~ 230 50 1950 1400 120 0.53 5.0 /400 67 180 -25 to +501~ 230 60 2230 1610 135 0.60 4.0 /400 70 120 -25 to +452.82.8C1)/C2)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]16012080400,2 0,4 0,6 [in H 2O]B2AAABB1212139013701395136082951231360.190.200.550.6010 250 500 750 1000 1250 [CFM]400 800 1200 1600 200050 Hz[m 3 /h]60 Hz170

– Motor protection: A Without TOP, B TOP wired internally– Cable exit: Lateral– Protection class: I– Product conforming to standards: EN 60335-1, B also CE– Approvals: CCCAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grilleattachments round nozzle for full nozzle"V""A"A4D 315-AC20 -01A4D 315-AC20 -02"V" A4E 315-AA05 -01"A" A4E 315-AA05 -02W4D 315-CC20 -01W4D 315-CC20 -02W4E 315-CA05 -01W4E 315-CA05 -02S4D 315-BC20 -01S4D 315-BC20 -02S4E 315-BA05 -01S4E 315-BA05 -02AC axialA seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesGeneralinformationEC axial fansDrawingsp. 172Guard grillep. 365Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.171Contacts

AC axial fansA series, Ø 315, drawings of directions of air flow "V" and "A"Without attachments2 a±322 ±3 65±358Depth of screwmax. 5 mmTypeA4D 315-AC20 -01A4D 315-AC20 -02A4E 315-AA05 -01A4E 315-AA05 -02"V""A""V""A"a101.0101.092.092.0450 ±20Ø92Ø312 -2M4Ø27±0,1❮ "V""A" ❯Brass lead tipsWith full round nozzleType1011746x60˚W4D 315-CC20 -01W4D 315-CC20 -02W4E 315-CA05 -01W4E 315-CA05 -02"V""A""V""A"380Ø347Ø39715˚45˚❮ "V""A" ❯9With guard grille for full nozzleType84,56,4S4D 315-BC20 -01S4D 315-BC20 -02S4E 315-BA05 -01S4E 315-BA05 -02"V""A""V""A"84375❮ "V""A" ❯172

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation173Contacts

AC axial fansA series, Ø 350– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 5– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawCapacitorSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz m 3 /h rpm W A µF/VDB dB(A) Pa °C kg p. 416 f.*4D 350 (1) M4D 068-EC*4E 350 M4E 068-ECAB3~ 230/400 50 2900 1420 145 0.68/0.39 — 69 150 -25 to +453~ 230/400 60 3300 1620 190 0.62/0.36 — 72 150 -25 to +401~ 230 50 2850 1390 140 0.62 5.0 /400 68 120 -25 to +601~ 230 60 3190 1550 195 0.86 5.0 /400 70 90 -25 to +403.13.1C1)/C2)A1)subject to alterations(1) 230 VAC ∆ / 400 VAC YCurvesn[rpm]P 1[W]I[A][Pa]16012080400,2 0,40,6 [in H 2O]A2 2BAABB121214051390137513451541691471610.390.400.650.711 10 500 1000 1500 2000 [CFM]1000 2000 3000[m 3 /h]50 Hz60 Hz174

– Motor protection: A Without TOP, B TOP wired internally– Cable exit: Lateral– Protection class: I– Product conforming to standards: EN 60335-1, B also CEAC axial fansDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grilleattachments round nozzle for full nozzle"V""A"A4D 350-AA06 -01A4D 350-AA06 -02"V" A4E 350-AA06 -01"A" A4E 350-AA06 -02W4D 350-CA06 -01W4D 350-CA06 -02W4E 350-CA06 -01W4E 350-CA06 -02S4D 350-BA06 -01S4D 350-BA06 -02S4E 350-BA06 -01S4E 350-BA06 -02TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesAC axialA seriesAC axialS seriesGeneralinformationEC axial fansDrawingsp. 176Guard grillep. 365Wall ringp. 372 f.Terminal boxp. 381Capacitorp. 382 f.Electr. connectionsp. 416 f.175Contacts

AC axial fansA series, Ø 350, drawings of directions of air flow "V" and "A"Without attachmentsType2 102±321±3 70±358Depth of screwmax. 5 mmA4D 350-AA06 -01A4D 350-AA06 -02A4E 350-AA06 -01A4E 350-AA06 -02"V""A""V""A"450 ±20Ø92Ø353 -2M4Ø27±0,1❮ "V""A" ❯Brass lead tipsWith full round nozzleType1112806x60˚W4D 350-CA06 -01W4D 350-CA06 -02W4E 350-CA06 -01W4E 350-CA06 -02"V""A""V""A"442Ø390Ø46015˚45˚❮ "V""A" ❯9With guard grille for full nozzleType114,56,4S4D 350-BA06 -01S4D 350-BA06 -02S4E 350-BA06 -01S4E 350-BA06 -02"V""A""V""A"85422❮ "V""A" ❯176

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation177Contacts

178

EC axial fans, EC diagonal fansTechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialS seriesAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axial fansEC diagonal fans Ø 180 - Ø 208 180EC axial fans Ø 200 - Ø 250 181179Contacts

EC diagonal fansØ 180– Material:Wall ring: Die-cast aluminiumBlades: Plastic PARotor: Galvanized– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Technical features: Control input 0-10 VDC /PWM, tach output, polarity and locked rotorprotection, soft start– EMC:Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Cable exit: Lateral– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: UL, CSA;A (48 VDC) with CCCNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.MassType Motor VDC VDC m 3 /h rpm W A dB(A) Pa °C kgW1G180-AB31 -01 M1G 074-BF A 24 16-28 900 4550 93 4.30 68 — -25 to +60 1.8W1G180-AB47 -01 M1G 074-BF A 48 36-57 925 4600 100 2.30 69 — -25 to +60 1.8subject to alterations220Ø208400 +20( 147,1)6Ø200±1Ø169,7±170±0,22,5AAAAAA1’2’3’4’12n[rpm]518049704760501046004500P 1[W]133141146140100106Lp A[dB(A)]717068696968 tL[%]—706755—70Curves (established at 48 VDC)AAAAAA345678n[rpm]434045503920379036603790P 1[W]11210560646863Lp A[dB(A)]666766656363 tL[%]6755—706755CSection C-CØ4,3±0,15CØ4,3±0,1512 ±0,312±0,390˚45˚"V" ❯Red = +Blue = –Yellow = PWM/Lin control inputWhite = Tach output[Pa]8007006005004003002001,0 2,0 3,0 [in H 2O]U N8U R44'33'A7100622'5 1 1'0 200 400 600[CFM]200 400 600 800 1000[m 3 /h]180Guard grillep. 366

EC axial fansØ 200– Material:Wall ring: Die-cast aluminiumBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 9– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 42– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Technical features: Control input 0-10 VDC /PWM, tach output, polarity and locked rotorprotection– EMC:Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Connection leads: Terminal strip– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: UL, CSA;B (48 VDC) with CCCGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.MassAC axialA seriesType Motor VDC VDC m 3 /h rpm W A dB(A) Pa °C kgW1G200-HH77 -52 M1G 074-BF B 24 16-28 1090 2950 55 2.60 60 — -25 to +60 2.1W1G200-HH01 -52 M1G 074-BF B 48 36-57 1005 2750 45 1.10 60 — -25 to +60 2.1subject to alterationsEC axial fansB 1’BBBBB2’3’4’12n[rpm]230029703100297029502890P 1[W]737780805558Lp A[dB(A)]636263666060 tL[%]—676454—67BBBBBB345678n[rpm]280027802270223021702130P 1[W]616327282930Lp A[dB(A)]616455545457 tL[%]6454—6764542252,61280 ±0,37EC axialS seriesQ-motorCurves (established at 24 VDC)[Pa]24020016012080400,2 0,4 0,60,8 1,0 [in H 2O]UN8UR474'33'22'B240260Ø4,5 +0,2PE (1)(2) – +4"V" ❯(1) Control input(2) Tach outputAccessories EC-SYSTEMS ESM5 10 200 400 600200 400 600 800 100061'[CFM][m 3 /h]TechnologyGuard grillep. 369181Contacts

EC diagonal fansØ 208– Material:Wall ring: Die-cast aluminiumBlades: Plastic PARotor: Galvanized– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 20– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Technical features: Control input 0-10 VDC /PWM, tach output, polarity and locked rotorprotection– EMC:Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Connection leads: Terminal strip– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: VDE, UL, CSA;A (48 VDC) with CCCNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.MassType Motor VDC VDC m 3 /h rpm W A dB(A) Pa °C kgW1G208-BA35 -52 M1G 074-BF A 24 16-28 1050 3500 96 4.40 74 — -25 to +72 2.3W1G208-BA73 -52 M1G 074-BF A 48 36-57 1050 3500 96 2.26 74 — -25 to +72 2.3subject to alterations260Ø240+0,5Ø232802,5+0,5AAAAAA1’2’3’4’12Curvesn[rpm]374035003450353035003300P 1[W]1161181191189699Lp A[dB(A)]757473757472 tL[%]—525348—52AAAAAA345678n[rpm]325033302960283027802840P 1[W]1009958636462Lp A[dB(A)]727370696870 tL[%]5348—525348CC[Pa][in H 2O]A30090˚45˚"V" ❯2501,00UR4'Section C-C Red = +Blue = –Yellow = PWM/Lin control inputØ4,5Ø4,5White = Tach output2000,75UN433'10±0,310±0,31500,508722'1006500,255 1 1'0 200 400 600[CFM]200 400 600 800 1000[m 3 /h]182Guard grillep. 367

EC axial fansØ 250– Material:Wall ring: Die-cast aluminiumBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 42– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Technical features: Control input 0-10 VDC /PWM, tach output, polarity and locked rotorprotection– EMC:Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Connection leads: Terminal strip– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: VDE, UL, CSA;B (48 VDC) with CCCGeneralinformationAC axial fansAC axialS seriesAC axialK seriesNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.MassAC axialA seriesType Motor VDC VDC m 3 /h rpm W A dB(A) Pa °C kgW1G250-HH37 -52 M1G 074-BF B 24 16-28 1920 2750 105 5.00 70 — -25 to +60 2.5W1G250-HH67 -52 M1G 074-BF B 48 36-57 1920 2750 105 2.60 70 — -25 to +60 2.5subject to alterationsEC axial fansB 1’BBBBB2’3’4’12n[rpm]292028002680260027502630P 1[W]129132135139105110Lp A[dB(A)]717271727069 tL[%]—636045—63BBBBBB345678n[rpm]252024402610232022302170P 1[W]11111473757880Lp A[dB(A)]697066676768 tL[%]6045—6360452802,61280 ±0,37EC axialS seriesQ-motorCurves[Pa]24020016012080400,2 0,4 0,6 0,8 [in H 2O]UR4'UN483'372'265 10 400 800400 800 1200 1600B1'[CFM][m 3 /h]295320Ø5,4 +0,2PE (1)(2) – +4"V" ❯(1) Control input(2) Tach outputTechnology Accessories EC-SYSTEMS ESMGuard grillep. 369183Contacts

184

EC axial fans S seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialS seriesAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axial fansEC axial fans, S series, 24 / 48 VDC Ø 200 - Ø 300 186EC axial fans, S series, mains-powered Ø 250 - Ø 990 198185Contacts

EC axial fans 24 /48 VDCS series, Ø 200– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 9– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 42– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVDC VDC m 3 /h rpm W A dB(A) Pa °C kgp. 420*1G 200 M1G 074-BFA24 16-28 1090 2950 55 2.60 60 — -25 to +60 1.5G)*1G 200 M1G 074-BFA48 36-57 1005 2750 45 1.10 60 — -25 to +60 1.5G)subject to alterationsCurves (established at 24 VDC)n[rpm]P 1[W]Lp A[dB(A)] tL[%][Pa]24020016012080400,2 0,4 0,60,8 1,0 [in H 2O]UN8UR474'33'22'AA 1’A 2’A 3’A 4’A 1A 2A 3A 4A 5A 6A 7A 8230029703100297029502890280027802270223021702130737780805558616327282930636263666060616455545457—676454—676454—67645465 10 200 400 600200 400 600 800 10001'[CFM][m 3 /h]186

– Technical features: • Tach output• Control input 0-10 VDC / PWM• Polarity and locked rotor protection– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Cable exit: Variable– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: UL, CSAAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle (1) for full nozzle for short nozzle"V" A1G 200-AH77 -52"A" A1G 200-AI77 -52"V" A1G 200-AH01 -52"A" A1G 200-AI01 -52W1G 200-CH77 -52W1G 200-CI77 -52W1G 200-CH01 -52W1G 200-CI01 -52S1G 200-BH77 -52S1G 200-BI77 -52S1G 200-BH01 -52S1G 200-BI01 -52(1) Increased noise levels in "V" direction of air flowS1G 200-AH77 -52S1G 200-AI77 -52S1G 200-AH01 -52S1G 200-AI01 -52TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesAC axialA seriesEC axial fansGeneralinformationDrawingsp. 188 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 420187Contacts

EC axial fans 24 /48 VDCS series, Ø 200, drawings of directions of air flow "V" and "A"Without attachmentsTypeBrass lead tips17±535 ±358±0,15M4Depth of screwmax. 6 mmA1G 200-AH77 -52A1G 200-AI77 -52A1G 200-AH01 -52A1G 200-AI01 -52"V""A""V""A"Ø92Ø197-232,7685450 +2065 ±1❮ "V""A" ❯With full round nozzleType98056x60˚15˚W1G 200-CH77 -52W1G 200-CI77 -52W1G 200-CH01 -52W1G 200-CI01 -52"V""A""V""A"Ø200Ø2801,257250❮ "V""A" ❯With guard grille for full nozzleType3,94,6S1G 200-BH77 -52S1G 200-BI77 -52S1G 200-BH01 -52S1G 200-BI01 -52"V""A""V""A"245❮ "V""A" ❯188

With guard grille for short nozzle2313±56,5TypeS1G 200-AH77 -52S1G 200-AI77 -52S1G 200-AH01 -52S1G 200-AI01 -52"V""A""V""A"AC axial fansAC axialK seriesAC axialS series260Generalinformation463,9❮ "V""A" ❯AC axialA seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans189Contacts

EC axial fans 24 /48 VDCS series, Ø 250– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7 for direction of air flow "V", 9 for direction of air flow "A"– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 42– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVDC VDC m 3 /h rpm W A dB(A) Pa °C kgp. 420*1G 250 M1G 074-BFA24 16-28 1920 2750 105 5.00 70 — -25 to +60 1.6G)*1G 250 M1G 074-BFA48 36-57 1920 2750 105 2.60 70 — -25 to +60 1.6G)subject to alterationsCurvesn[rpm]P 1[W]Lp A[dB(A)] tL[%][Pa]24020016012080400,2 0,4 0,6 0,8 [in H 2O]UNUR844'7363'22'AA 1’A 2’A 3’A 4’A 1A 2A 3A 4A 5A 6A 7A 829202800268026002750263025202440261023202230217012913213513910511011111473757880717271737069697166676768—636045—636045—6360450 400 800400 800 1200 16005 11'[CFM][m 3 /h]190

– Technical features: • Tach output• Control input 0-10 VDC / PWM• Polarity and locked rotor protection– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Cable exit: Variable– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: UL, CSAAC axialK seriesGeneralinformationAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle (1) for full nozzle for short nozzle"V" A1G 250-AH37 -52"A" A1G 250-AI37 -52"V" A1G 250-AH67 -52"A" A1G 250-AI67 -52W1G 250-CH37 -52W1G 250-CI37 -52W1G 250-CH67 -52W1G 250-CI67 -52S1G 250-BH37 -52S1G 250-BI37 -52S1G 250-BH67 -52S1G 250-BI67 -52(1) Increased noise levels in "V" direction of air flowS1G 250-AH37 -52S1G 250-AI37 -52S1G 250-AH67 -52S1G 250-AI67 -52TechnologyAccessoriesEC-SYSTEMSAC axialA seriesESMQ-motorEC axialS seriesEC axial fansDrawingsp. 192 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 420191Contacts

EC axial fans 24 /48 VDCS series, Ø 250, drawings of directions of air flow "V" and "A"Without attachmentsTypeBrass lead tips21±535 ±358 ±0,15M4Depth of screwmax. 6 mmA1G 250-AH37 -52A1G 250-AI37 -52A1G 250-AH67 -52A1G 250-AI67 -52"V""A""V""A"Ø92+1Ø251 -232,7685450 +2065 ±1❮ "V""A" ❯With full round nozzleType98766x60˚15˚W1G 250-CH37 -52W1G 250-CI37 -52W1G 250-CH67 -52W1G 250-CI67 -52"V""A""V""A"Ø257Ø3201,257295❮ "V""A" ❯With guard grille for full nozzleType3,94,6S1G 250-BH37 -52S1G 250-BI37 -52S1G 250-BH67 -52S1G 250-BI67 -52"V""A""V""A"290❮ "V""A" ❯192

With guard grille for short nozzle2718±56,5TypeS1G 250-AH37 -52S1G 250-AI37 -52S1G 250-AH67 -52S1G 250-AI67 -52"V""A""V""A"AC axial fans300AC axialS seriesAC axialK seriesGeneralinformation453,9❮ "V""A" ❯AC axialA seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans193Contacts

EC axial fans 24 /48 VDCS series, Ø 300– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Sheet steel, coated in blackRotor: Coated in black– Number of blades: 7– Direction of rotation: Direction of air flow "V" counter-clockwise, direction of air flow "A"clockwise, seen on rotor– Type of protection: IP 42– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageVoltage rangeAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVDC VDC m 3 /h rpm W A dB(A) Pa °C kgp. 420*1G 300 M1G 074-CFA24 16-28 2450 1800 90 4.00 65 — -25 to +60 2.2G)*1G 300 M1G 074-CFA48 36-57 2450 1800 90 2.00 65 — -25 to +60 2.2G)subject to alterationsCurvesn[rpm]P 1[W]Lp A[dB(A)] tL[%][Pa]160120800,2 0,4 0,6 [in H 2O]UNUR844'33'AA 1’A 2’A 3’A 4’A 1A 2A 3A 4A 5A 6A 7A 81940185017901720180017201670160014801440140013501081111131169089919349525558676666666565656461626159—717160—717160—71716040722'651 1'0 400 800 1200[CFM]600 1200 1800 2400 [m 3 /h]194

– Technical features: • Tach output• Control input 0-10 VDC / PWM• Polarity and locked rotor protection– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2– Cable exit: Variable– Protection class: I– Product conforming to standard: EN 60950-1– Approvals: UL, CSAAC axial fansAC axialS seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A1G 300-AE19 -54A1G 300-AE19 -52"V" A1G 300-AE33 -54"A" A1G 300-AE33 -52W1G 300-CE19 -54W1G 300-CE19 -52W1G 300-CE33 -54W1G 300-CE33 -52S1G 300-BE19 -54S1G 300-BE19 -52S1G 300-BE33 -54S1G 300-BE33 -52S1G 300-AE19 -54S1G 300-AE19 -52S1G 300-AE33 -54S1G 300-AE33 -52TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesAC axialK seriesAC axialA seriesEC axial fansGeneralinformationDrawingsp. 196 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 420195Contacts

EC axial fans 24 /48 VDCS series, Ø 300, drawings of directions of air flow "V" and "A"Without attachmentsc ±5 60 ±3Brass lead tips58M4±0,15Depth of screwmax. 6 mmTypeA1G 300-AE19 -54A1G 300-AE19 -52A1G 300-AE33 -54A1G 300-AE33 -52"V""A""V""A"c19.719.219.719.2685450 +20Ø92Ø300 -2314x90˚75 ±1❮ "V""A" ❯With full round nozzleType80116x60˚W1G 300-CE19 -54W1G 300-CE19 -52W1G 300-CE33 -54W1G 300-CE33 -52"V""A""V""A"915˚Ø326Ø397380❮ "V""A" ❯With guard grille for full nozzleType3,94,6S1G 300-BE19 -54S1G 300-BE19 -52S1G 300-BE33 -54S1G 300-BE33 -52"V""A""V""A"360❮ "V""A" ❯196

With guard grille for short nozzle504,5 4,3TypeS1G 300-AE19 -54S1G 300-AE19 -52S1G 300-AE33 -54S1G 300-AE33 -52"V""A""V""A"AC axial fans360AC axialS seriesAC axialK seriesGeneralinformation❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSAC axialA seriesESMQ-motorEC axialS seriesEC axial fans197Contacts

EC axial fans mains-poweredS series, Ø 250– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 7 for direction of air flow "V", 9 for direction of air flow "A"– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 423*3G 250 M3G 074-CFA1~ 100-130 50/60 2850 170 2.20 170 -25 to +60 2.4J1)*3G 250 M3G 074-CFB1~ 200-277 50/60 3050 175 1.40 210 -25 to +60 2.4 J1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa]200[in H 2O]AA 1A 2A 32850282028001621581531.801.902.00717172—8484A 427701442.007479160120800,2 0,4 0,61287432A 5A 6A 7A 8A 9A 10A 11A 122360236023402310165016501650165085919495333536371.101.201.201.200.500.500.500.506666676862565859—777770—687068401161095 10250500 750 1000 1250[CFM]400800 1200 1600 2000[m 3 /h]198

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Tach output• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 60950-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle (2) for full nozzle for short nozzle"V""A"A3G 250-AC71 -01A3G 250-AD71 -01"V" A3G 250-AC54 -01"A" A3G 250-AD54 -01W3G 250-CC71 -01W3G 250-CD71 -01W3G 250-CC54 -01W3G 250-CD54 -01S3G 250-BC71 -01S3G 250-BD71 -01S3G 250-BC54 -01S3G 250-BD54 -01(2) Increased noise levels in "V" direction of air flowS3G 250-AC71 -01S3G 250-AD71 -01S3G 250-AC54 -01S3G 250-AD54 -01AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa][in H 2O]200BB 1B 2B 3B 430502970290028201701691691681.301.301.301.3072737475—898886ESM160120800,2 0,4 0,61287432B 5B 6B 7B 8B 9B 10B 11B 122500241023602300174017001660161096949494373737370.700.700.700.700.300.300.300.306868696957565859—868681—757572Accessories EC-SYSTEMS4011602504001095 1500 750 1000 1250800 1200 1600 2000[CFM][m 3 /h]TechnologyDrawingsp. 200 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 423199Contacts

EC axial fans mains-poweredS series, Ø 250, drawings of directions of air flow "V" and "A"Without attachmentsType32,5±0,5105,2±121±3(1)M4(2)M4M4(3)A3G 250-AC71 -01A3G 250-AD71 -01A3G 250-AC54 -01A3G 250-AD54 -01"V""A""V""A"3±0,2Ø133±0,3Ø115,3Ø92,1Ø251 -2+14x90˚Ø58Ø90Ø125450+2035±345˚885Core-end sleeve❮ "V""A" ❯(1) Depth of screw max. 8 mm (pilot hole for self-tapping thread)(2) Depth of screw max. 6 mm (pilot hole for self-tapping thread)(3) Depth of screw 8-10 mmWith full round nozzleType94,4±286,5±26x60˚7W3G 250-CC71 -01W3G 250-CD71 -01W3G 250-CC54 -01W3G 250-CD54 -01"V""A""V""A"Ø320±1Ø250±1Ø257±115˚6295❮ "V""A" ❯With guard grille for full nozzleType33,25±155,25±34,2S3G 250-BC71 -01S3G 250-BD71 -01S3G 250-BC54 -01S3G 250-BD54 -01"V""A""V""A"Ø250±1Ø290±1,55❮ "V""A" ❯200

With guard grille for short nozzle71,25±2 17,25±338±1,56,2TypeS3G 250-AC71 -01S3G 250-AD71 -01S3G 250-AC54 -01S3G 250-AD54 -01"V""A""V""A"AC axial fansØ281±1Ø300±1,5AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans201Contacts

EC axial fans mains-poweredS series, Ø 300– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 423*3G 300 M3G 074-CFA1~ 100-130 50/60 1790 125 1.70 110 -25 to +60 2.7J1)*3G 300 M3G 074-CFB1~ 200-277 50/60 1710 110 0.70 110 -25 to +60 2.7 J1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa][in H 2O]AAA121790177092981.201.306464—62A 317501011.306366100806040200,1 0,20,3 0,41211874632A 4A 5A 6A 7A 8A 9A 10A 11A 1217201460143014201400103010301020101010650535558212223241.400.700.700.800.800.300.300.400.4062585857564849484667—616765—52555910025040095 1500 750 1000 1250 [CFM]800 1200 1600 2000[m 3 /h]202

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Tach output• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 60950-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 300-AB77 -01A3G 300-AB77 -02"V" A3G 300-AB56 -01"A" A3G 300-AB56 -02W3G 300-CB77 -01W3G 300-CB77 -02W3G 300-CB56 -01W3G 300-CB56 -02S3G 300-BB77 -01S3G 300-BB77 -02S3G 300-BB56 -01S3G 300-BB56 -02S3G 300-AB77 -01S3G 300-AB77 -02S3G 300-AB56 -01S3G 300-AB56 -02EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]10080604020[in H 2O]0,1 0,20,3 0,41211847632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 121710168016701650141013901345137510009909909807681858949525457212223240.600.600.600.700.400.400.500.500.200.200.200.20626262605657565547484645—646669—576161—545860Accessories EC-SYSTEMS ESM02504001095 1500 750 1000 1250800 1200 1600 2000[CFM][m 3 /h]TechnologyDrawingsp. 204 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 423203Contacts

EC axial fans mains-poweredS series, Ø 300, drawings of directions of air flow "V" and "A"Without attachments105,2±1c±332,5±0,5(1)M4M4M4(2)(3)TypeA3G 300-AB77 -01A3G 300-AB77 -02A3G 300-AB56 -01A3G 300-AB56 -02"V""A""V""A"c16.516.016.516.03±0,2Ø133±0,3Ø115,3Ø92,1Ø300-24x90˚Ø58Ø90Ø125885450+2060±345˚Core-end sleeve❮ "V""A" ❯(1) Depth of screw max. 8 mm (pilot hole for self-tapping thread)(2) Depth of screw max. 6 mm (pilot hole for self-tapping thread)(3) Depth of screw 8-10 mmWith full round nozzleType88±280±26x60˚9W3G 300-CB77 -01W3G 300-CB77 -02W3G 300-CB56 -01W3G 300-CB56 -02"V""A""V""A"Ø397±1Ø330±1Ø326±215˚38011❮ "V""A" ❯With guard grille for full nozzleType33,25±175,75±34,2S3G 300-BB77 -01S3G 300-BB77 -02S3G 300-BB56 -01S3G 300-BB56 -02"V""A""V""A"Ø330±1Ø360±1,55❮ "V""A" ❯204

With guard grille for short nozzle82,5±226,5±360±1,54,2TypeS3G 300-AB77 -01S3G 300-AB77 -02S3G 300-AB56 -01S3G 300-AB56 -02"V""A""V""A"AC axial fansØ345±1Ø360±1,5AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans205Contacts

EC axial fans mains-poweredS series, Ø 315– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 423*3G 315 M3G 074-CFA1~ 100-130 50/60 1670 160 2.10 110 -25 to +60 2.9J1)*3G 315 M3G 074-CFB1~ 200-277 50/60 1660 170 1.30 130 -25 to +60 2.9 J1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa]120[in H 2O]4AA 1A 2A 3A 416701660163016101091181261381.401.501.601.8063626260—536055100806040200,1 0,20,3 0,401238276111095 1400 800 1200[CFM]A 5A 6A 7A 8A 9A 10A 11A 12113011201120111056056056056038424549899100.600.600.600.700.100.200.200.205352525032313129—485450—253330600 1200 1800 2400[m 3 /h]206

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Tach output• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 60950-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 315-AA76 -01A3G 315-AA76 -02"V" A3G 315-AA58 -01"A" A3G 315-AA58 -02W3G 315-CA76 -01W3G 315-CA76 -02W3G 315-CA58 -01W3G 315-CA58 -02S3G 315-BA76 -01S3G 315-BA76 -02S3G 315-BA58 -01S3G 315-BA58 -02S3G 315-AA76 -01S3G 315-AA76 -02S3G 315-AA58 -01S3G 315-AA58 -02EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]120[in H 2O]BB 1B 2B 3B 416601640162516101101191251350.800.900.901.0062616260—435250ESM100806040200,1 0,20,3 0,4043872612111095 1400 800 1200600 1200 1800 2400[CFM][m 3 /h]B 5B 6B 7B 8B 9B 10B 11B 12125012501220117064063063062050555557111212131.001.001.001.000.400.400.500.505554545235343433—244043—173137Technology Accessories EC-SYSTEMSDrawingsp. 208 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 423207Contacts

EC axial fans mains-poweredS series, Ø 315, drawings of directions of air flow "V" and "A"Without attachments105,2±1c±332,5±0,5(1)M4M4M4(2)(3)TypeA3G 315-AA76 -01A3G 315-AA76 -02A3G 315-AA58 -01A3G 315-AA58 -02"V""A""V""A"c6.0-6.06.0-6.03±0,2Ø133±0,3Ø115,3Ø92,1Ø312±24x90˚Ø58Ø90Ø125885450+2085±345˚Core-end sleeve❮ "V""A" ❯(1) Depth of screw max. 8 mm (pilot hole for self-tapping thread)(2) Depth of screw max. 6 mm (pilot hole for self-tapping thread)(3) Depth of screw 8-10 mmWith full round nozzleType114±374±26x60˚9W3G 315-CA76 -01W3G 315-CA76 -02W3G 315-CA58 -01W3G 315-CA58 -02"V""A""V""A"Ø397±1Ø360±1Ø347±215˚38011❮ "V""A" ❯With guard grille for full nozzle40±1s±36,4TypeS3G 315-BA76 -01S3G 315-BA76 -02S3G 315-BA58 -01S3G 315-BA58 -02"V""A""V""A"s91.079.091.079.0Ø360±1Ø375±2,55❮ "V""A" ❯208

With guard grille for short nozzle90±2u±36,4TypeS3G 315-AA76 -01S3G 315-AA76 -02S3G 315-AA58 -01S3G 315-AA58 -02"V""A""V""A"u41.029.041.029.0AC axial fansØ360±1Ø375±2,5AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans209Contacts

EC axial fans mains-poweredS series, Ø 330– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 423*3G 330 M3G 074-CFA1~ 100-130 50/60 1660 170 2.20 120 -25 to +60 2.9J1)*3G 330 M3G 074-CFB1~ 200-277 50/60 1630 170 1.30 120 -25 to +60 2.9 J1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa]120[in H 2O]AA 1A 2A 3A 416601630161015701311441471631.701.801.902.1068666463—817861100806040200,1 0,20,3 0,41211847632A 5A 6A 7A 8A 9A 10A 11A 12135013401330129083082081080072838792202325271.001.101.201.200.300.300.400.406462605851484544—807462—63594810050095 11000 15002000[CFM]10002000 3000[m 3 /h]210

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Tach output• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 60950-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 330-AA76 -01A3G 330-AA76 -02"V" A3G 330-AA58 -01"A" A3G 330-AA58 -02W3G 330-CA76 -01W3G 330-CA76 -02W3G 330-CA58 -01W3G 330-CA58 -02S3G 330-BA76 -01S3G 330-BA76 -02S3G 330-BA58 -01S3G 330-BA58 -02S3G 330-AA76 -01S3G 330-AA76 -02S3G 330-AA58 -01S3G 330-AA58 -02AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]120[in H 2O]BB 1B 2B 3B 416301600159015801301391461510.951.001.101.1068656463—706760ESM100806040200,1 0,20,3 0,40500100012114837261095 11000 15002000 30002000[CFM][m 3 /h]B 5B 6B 7B 8B 9B 10B 11B 12135013301330131097096096095076828693333637400.600.600.650.700.300.300.300.306361605854525049—726959—747060Technology Accessories EC-SYSTEMSDrawingsp. 212 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 423211Contacts

EC axial fans mains-poweredS series, Ø 330, drawings of directions of air flow "V" and "A"Without attachments105,2±1c±332,5±0,5(1)M4M4M4(2)(3)TypeA3G 330-AA76 -01A3G 330-AA76 -02A3G 330-AA58 -01A3G 330-AA58 -02"V""A""V""A"c6.0-7.06.0-7.03±0,2Ø133±0,3Ø115,3Ø92,1Ø330±24x90˚Ø58Ø90Ø125885450+2087±345˚Core-end sleeve❮ "V""A" ❯(1) Depth of screw max. 8 mm (pilot hole for self-tapping thread)(2) Depth of screw max. 6 mm (pilot hole for self-tapping thread)(3) Depth of screw 8-10 mmWith full round nozzleType120±380±26x60˚9W3G 330-CA76 -01W3G 330-CA76 -02W3G 330-CA58 -01W3G 330-CA58 -02"V""A""V""A"Ø440±1Ø386±1Ø369±215˚40411❮ "V""A" ❯With guard grille for full nozzle40±1s±36,4TypeS3G 330-BA76 -01S3G 330-BA76 -02S3G 330-BA58 -01S3G 330-BA58 -02"V""A""V""A"s93.080.093.080.0Ø386±1Ø410±2,55❮ "V""A" ❯212

With guard grille for short nozzle90±2u±36,4TypeS3G 330-AA76 -01S3G 330-AA76 -02S3G 330-AA58 -01S3G 330-AA58 -02"V""A""V""A"u43.030.043.030.0AC axial fansØ386±1Ø410±2,5AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans213Contacts

EC axial fans mains-poweredS series, Ø 350– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 423*3G 350 M3G 074-CFA1~ 100-130 50/60 1600 170 2.20 100 -25 to +60 2.9J1)*3G 350 M3G 074-CFB1~ 200-277 50/60 1540 170 1.30 100 -25 to +60 2.9 J1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa]120[in H 2O]AA 1A 2A 3A 416001540149014101651671671672.102.102.102.1066666461—687260100806040200,1 0,20,3 0,41281147632A 5A 6A 7A 8A 9A 10A 11A 12130012501210115091088085082091919291363535351.201.201.201.200.500.500.500.506261595554525046—687059—626455100500100095 11000 15002000 [CFM]2000 3000[m 3 /h]214

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Tach output• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 60950-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 60335-1, EN 61800-5-1, EN 60950-1, CE– Approvals: VDE, UL, CSA, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 350-AA76 -01A3G 350-AA76 -02"V" A3G 350-AA58 -01"A" A3G 350-AA58 -02W3G 350-CA76 -01W3G 350-CA76 -02W3G 350-CA58 -01W3G 350-CA58 -02S3G 350-BA76 -01S3G 350-BA76 -02S3G 350-BA58 -01S3G 350-BA58 -02S3G 350-AA76 -01S3G 350-AA76 -02S3G 350-AA58 -01S3G 350-AA58 -02AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]120[in H 2O]BB 1B 2B 3B 415401520149014301501621681671.201.201.301.2067666461—626661ESM100806040200,1 0,20,3 0,41281147632B 5B 6B 7B 8B 9B 10B 11B 12126012401200115087085084081087919091333534340.700.700.700.700.300.300.300.306160585551504845—606457—586357Accessories EC-SYSTEMS050010001095 11000 150020002000 3000[CFM][m 3 /h]TechnologyDrawingsp. 216 f.Guard grillep. 362 f.Wall ringp. 372 f.Electr. connectionp. 423215Contacts

EC axial fans mains-poweredS series, Ø 350, drawings of directions of air flow "V" and "A"Without attachments105,2±1c±332,5±0,5(1)M4M4M4(2)(3)TypeA3G 350-AA76 -01A3G 350-AA76 -02A3G 350-AA58 -01A3G 350-AA58 -02"V""A""V""A"c7.0-12.07.0-12.03±0,2Ø133±0,3Ø115,3Ø92,1Ø352±24x90˚Ø58Ø90Ø125885450+2092±345˚Core-end sleeve❮ "V""A" ❯(1) Depth of screw max. 8 mm (pilot hole for self-tapping thread)(2) Depth of screw max. 6 mm (pilot hole for self-tapping thread)(3) Depth of screw 8-10 mmWith full round nozzleType120±380±26x60˚9W3G 350-CA76 -01W3G 350-CA76 -02W3G 350-CA58 -01W3G 350-CA58 -02"V""A""V""A"Ø460±1Ø390±1Ø390±215˚44211❮ "V""A" ❯With guard grille for full nozzle40±1s±36,4TypeS3G 350-BA76 -01S3G 350-BA76 -02S3G 350-BA58 -01S3G 350-BA58 -02"V""A""V""A"s99.080.099.080.0Ø390±1Ø422±2,55❮ "V""A" ❯216

With guard grille for short nozzle90±2u±36,4TypeS3G 350-AA76 -01S3G 350-AA76 -02S3G 350-AA58 -01S3G 350-AA58 -02"V""A""V""A"u49.030.049.030.0AC axial fansØ390±1Ø422±2,5AC axialS seriesAC axialK seriesGeneralinformation5❮ "V""A" ❯TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans217Contacts

EC axial fans mains-poweredS series, Ø 400– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 54– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 425*3G 400 M3G 084-FAA1~ 100-130 50/60 1620 350 4.20 165 -25 to +60 5.2K1)*3G 400 M3G 084-FAB1~ 200-277 50/60 1690 390 2.50 180 -25 to +60 5.2 K1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa]175150125100750,25 0,5[in H 2O]43AA 1A 2A 3A 416201590156515503103323493503.804.004.204.2069686868—6662545022510 10002000 3000 [CFM]1000 2000 3000 4000 5000 [m 3 /h]218

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Alarm relay• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 61800-5-1, CE– Approvals: B UL, CSA; A B VDE, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 400-AA37 -81A3G 400-AA37 -82"V" A3G 400-AA22 -71"A" A3G 400-AA22 -72W3G 400-CA37 -81W3G 400-CA37 -82W3G 400-CA22 -71W3G 400-CA22 -72S3G 400-KA37 -81S3G 400-KA37 -82S3G 400-KA22 -71S3G 400-KA22 -72S3G 400-LA37 -81S3G 400-LA37 -82S3G 400-LA22 -71S3G 400-LA22 -72EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]150100500,25 0,5[in H 2O]1281147632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 121690166016401630130013001300130010001000100010003403753803901621791922037691931002.102.302.402.501.001.101.201.200.500.600.600.70757270686866646361605756—646154—646154—646154ESMEC-SYSTEMSAccessories1095 10 10002000 3000 [CFM]1000 2000 3000 4000 5000 [m 3 /h]TechnologyDrawingsp. 220 f.Guard grillep. 362 ff.Wall ringp. 372 f.Electr. connectionp. 425219Contacts

EC axial fans mains-poweredS series, Ø 400, drawings of directions of air flow "V" and "A"Without attachmentsType11,5 88 ±3±3- 0 +Depth of screw 8-10 mmM645°A3G 400-AA37 -81A3G 400-AA37 -82A3G 400-AA22 -71A3G 400-AA22 -72"V""A""V""A"47,7145±1Ø178Ø150Ø100±0,25Ø102Ø392 ±24x90°858600 +20Core-end sleeve❮ "V""A" ❯Ø164±0,35With full round nozzleType152966x60˚Ø9W3G 400-CA37 -81W3G 400-CA37 -82W3G 400-CA22 -71W3G 400-CA22 -72"V""A""V""A"Ø468Ø420Ø504Ø52812❮ "V""A" ❯With guard grille for full nozzleType56,291S3G 400-KA37 -81S3G 400-KA37 -82S3G 400-KA22 -71S3G 400-KA22 -72"V""A""V""A"9Ø468Ø502❮ "V""A" ❯220

With guard grille for short nozzle98,2 49,09TypeS3G 400-LA37 -81S3G 400-LA37 -82S3G 400-LA22 -71S3G 400-LA22 -72"V""A""V""A"AC axial fansØ430Ø470AC axialS seriesAC axialK seriesGeneralinformation❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSAC axialA seriesESMQ-motorEC axialS seriesEC axial fans221Contacts

EC axial fans mains-poweredS series, Ø 450– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in blackBlades: Sheet steel, coated in blackRotor: Coated in blackElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" counter-clockwise, "A" clockwise, seen on rotor– Type of protection: IP 54– Insulation class: "B"– Mounting position: Shaft horizontal or rotor on bottom (rotor on top on request)– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Mass withoutattachmentsElectr. connectionTypeMotorVAC Hz rpm W A Pa °C kgp. 425*3G 450 M3G 084-FAA1~ 100-130 50/60 1270 310 3.70 120 -25 to +60 5.5K1)*3G 450 M3G 084-FAB1~ 200-277 50/60 1310 325 2.10 120 -25 to +60 5.5 K1)subject to alterations(1) Nominal data in operating point with maximum load and 115 or 230 VACCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%][Pa][in H 2O]AAA12127012452672823.303.506969—70175A 312303003.706766A 412203083.70634215012510075500,25 0,5432250 1000200030001[CFM]1000 2000 3000 4000 5000[m 3 /h]222

Generalinformation– Technical features: • Output 10 VDC max. 1.1 mA• PFC (passive)• Alarm relay• Control input 0-10 VDC / PWM• Over-temperature protected electronics / motor– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Cable exit: Variable– Protection class: I– Product conforming to standards: EN 61800-5-1, CE– Approvals: B UL, CSA; A B VDE, CCC, GOST are applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯WithoutWith fullWith guard grille With guard grilleattachments round nozzle for full nozzle for short nozzle"V""A"A3G 450-AA40 -81A3G 450-AA40 -82"V" A3G 450-AA14 -71"A" A3G 450-AA14 -72W3G 450-CA40 -81W3G 450-CA40 -82W3G 450-CA14 -71W3G 450-CA14 -72S3G 450-KA40 -81S3G 450-KA40 -82S3G 450-KA14 -71S3G 450-KA14 -72S3G 450-LA40 -81S3G 450-LA40 -82S3G 450-LA14 -71S3G 450-LA14 -72EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[W]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]20016012080400,4 [in H 2O]0,2 0,61284732BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 1213101290127012401000100010001000700700700700245262290325108122140174384248601.501.701.902.100.700.800.901.100.300.300.300.40737270666867656161605856—706642—706642—706642ESMEC-SYSTEMSAccessories1161095 10 10002000 3000[CFM]1000 2000 3000 4000 5000[m 3 /h]TechnologyDrawingsp. 224 f.Guard grillep. 362 ff.Wall ringp. 372 f.Electr. connectionp. 425223Contacts

EC axial fans mains-poweredS series, Ø 450, drawings of directions of air flow "V" and "A"Without attachmentsType- 0 +11,5±3 92±3Depth of screw 8-10 mmM645°A3G 450-AA40 -81A3G 450-AA40 -82A3G 450-AA14 -71A3G 450-AA14 -72"V""A""V""A"47,7145±1Ø178Ø150Ø100±0,25Ø102Ø446 ±24x90°858600 +20Core-end sleeve❮ "V""A" ❯Ø164±0,35With full round nozzleType1561006x60˚Ø11W3G 450-CA40 -81W3G 450-CA40 -82W3G 450-CA14 -71W3G 450-CA14 -72"V""A""V""A"Ø536Ø465Ø578Ø60714❮ "V""A" ❯With guard grille for full nozzleType56,295S3G 450-KA40 -81S3G 450-KA40 -82S3G 450-KA14 -71S3G 450-KA14 -72"V""A""V""A"9Ø492Ø522❮ "V""A" ❯224

With guard grille for short nozzle98,2 539TypeS3G 450-LA40 -81S3G 450-LA40 -82S3G 450-LA14 -71S3G 450-LA14 -72"V""A""V""A"AC axial fansØ492Ø522AC axialS seriesAC axialK seriesGeneralinformation❮ "V""A" ❯TechnologyAccessoriesEC-SYSTEMSAC axialA seriesESMQ-motorEC axialS seriesEC axial fans225Contacts

EC axial fans mains-poweredS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 500 M3G 112-GAA1~ 200-277 50/60 1250 0.69 3.10 110 -25 to +60L1)subject to alterations(1) Nominal data in operating point with maximum load and 230 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]200AA 1A 2A 3A 4126012601250—0.610.670.69—2.803.003.10—747677——6260—16012080400,2 0,4 0,6121187632A 5A 6A 7A 8A 9A 10A 11A 1210201030102010207507407407400.410.360.370.360.160.150.150.151.901.701.701.700.800.700.700.708070717370626263—676763—73726810010009512000 3000 4000 5000 6000[CFM]20004000 6000 8000 10000[m 3 /h]226

TechnologyAccessoriesEC-SYSTEMSAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)Interference immunity acc. to EN 61000-6-2 (industrial environment)Harmonics acc. to DIN EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 500-AE33 -11 W3G 500-CE33 -11 S3G 500-BE33 -11 S3G 500-AE33 -11Drawingsp. 230 f.Electr. connectionp. 427227Contacts

EC axial fans mains-poweredS series, Ø 500– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 500 M3G 112-GAA3~ 200-240 50/60 1450 1.04 3.40 195 -25 to +60L2)*3G 500 M3G 112-GAB3~ 380-480 50/60 1450 1.04 1.70 195 -25 to +60 L2)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]2004AA 1A 2A 3A 414501450145014501.211.001.051.043.803.203.403.4097798182—77686016012080400,2 0,4 0,612811710362A 5A 6A 7A 8A 9A 10A 11A 12122012701260126010801110111011000.700.660.670.660.470.440.460.452.402.202.402.201.801.801.801.808776777983737475—817362—817263010009 5 12000 3000 4000 5000 6000[CFM]20004000 6000 8000 10000[m 3 /h]228

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 500-AE38 -06 W3G 500-CE38 -06 S3G 500-BE38 -06 S3G 500-AE38 -06"V" A3G 500-AE33 -01 W3G 500-CE33 -01 S3G 500-BE33 -01 S3G 500-AE33 -01AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]2004BB 1B 2B 3B 414501450145014501.211.001.051.041.901.601.701.7097798182—776860ESM16012080400,2 0,4 0,612811710362B 5B 6B 7B 8B 9B 10B 11B 12122012701260126010801110111011000.700.660.670.660.470.440.460.451.201.101.201.100.900.900.900.908776777983737475—817362—817263Accessories EC-SYSTEMS0100020009 5 12000 3000 4000 5000 60004000 6000 8000 10000[CFM][m 3 /h]TechnologyDrawingsp. 230 f.Electr. connectionp. 427229Contacts

EC axial fans mains-poweredS series, Ø 500, drawings for direction of air flow "V"Without attachments143±2128±2TypeA3G 500-AE33 -11A3G 500-AE38 -06A3G 500-AE33 -01Mass[kg]8.78.78.7Ø186±0,55x72˚Ø200±1Ø168 ±0,5Ø493±2Cable gland56,5194±2❮ "V"±0,65xM6Depth of screw12-16 mmWith full square nozzle164±3 31TypeW3G 500-CE33 -11W3G 500-CE38 -06W3G 500-CE33 -01Mass[kg]16.216.216.2Ø11Ø51716120❮ "V"615655With guard grille for full nozzleØ7TypeS3G 500-BE33 -11S3G 500-BE38 -06S3G 500-BE33 -01Mass[kg]11.211.211.2Ø534Ø519 +1,555 131141❮ "V"230

With guard grille for short nozzle134753,5TypeS3G 500-AE33 -11S3G 500-AE38 -06S3G 500-AE33 -01Mass[kg]12.412.412.4Ø524Ø565AC axial fansAC axialK seriesAC axialS seriesGeneralinformation❮ "V"63Ø9TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans231Contacts

EC axial fans mains-poweredS series, Ø 560– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 560 M3G 112-GAA1~ 200-277 50/60 1160 0.79 3.50 155 -25 to +60L1)subject to alterations(1) Nominal data in operating point with maximum load and 230 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]200AA 1A 2A 3A 411601160115011600.660.730.770.793.003.303.403.5077808080—82746516012080400,2 0,4 0,61211847632A 5A 6A 7A 8A 9A 10A 11A 129709509309406806906806800.350.390.400.410.140.160.170.171.601.801.801.900.700.800.800.807375747467676566—928272—968876109510 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000 [m 3 /h]232

TechnologyAccessoriesEC-SYSTEMSAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)Interference immunity acc. to EN 61000-6-2 (industrial environment)Harmonics acc. to DIN EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 560-AE41 -11 W3G 560-CE41 -11 S3G 560-BE41 -11 S3G 560-AE41 -11Drawingsp. 236 f.Electr. connectionp. 427233Contacts

EC axial fans mains-poweredS series, Ø 560– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 560 M3G 112-GAA3~ 200-240 50/60 1260 0.97 3.20 180 -25 to +60L2)*3G 560 M3G 112-GAB3~ 380-480 50/60 1260 0.97 1.60 180 -25 to +60 L2)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]200160120800,2 0,4 0,61211847362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 12126012601260126010801060105010408007907807800.810.920.960.970.500.530.540.540.220.240.240.242.803.203.203.202.002.002.002.001.001.001.001.00778081837375767867686969—756558—807163—867566401095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000 [m 3 /h]234

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 560-AE43 -06 W3G 560-CE43 -06 S3G 560-BE43 -06 S3G 560-AE43 -06"V" A3G 560-AE32 -01 W3G 560-CE32 -01 S3G 560-BE32 -01 S3G 560-AE32 -01AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]200160120800,2 0,4 0,61281147362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 12126012601260126010801060105010408007907807800.810.920.960.970.500.530.540.540.220.240.240.241.401.601.601.601.001.001.001.000.500.500.500.50778081837375767867686969—756558—807163—867566Accessories EC-SYSTEMS ESM401095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000 [m 3 /h]TechnologyDrawingsp. 236 f.Electr. connectionp. 427235Contacts

EC axial fans mains-poweredS series, Ø 560, drawings for direction of air flow "V"Without attachments147±2132±2TypeA3G 560-AE41 -11A3G 560-AE43 -06A3G 560-AE32 -01Mass[kg]8.98.98.9Ø186±0,55x72˚Ø200±1Ø168 ±0,5Ø548±2Cable gland56,5194±2❮ "V"±0,65xM6Depth of screw12-16 mmWith full square nozzle190±3 6TypeW3G 560-CE41 -11W3G 560-CE43 -06W3G 560-CE32 -01Mass[kg]18.018.018.0Ø11Ø57616135❮ "V"675725With guard grille for full nozzleØ7TypeS3G 560-BE41 -11S3G 560-BE43 -06S3G 560-BE32 -01Mass[kg]11.911.911.9Ø593Ø578 +1,565 125130❮ "V"236

With guard grille for short nozzle144747,5TypeS3G 560-AE41 -11S3G 560-AE43 -06S3G 560-AE32 -01Mass[kg]13.613.613.6Ø647Ø700AC axial fansAC axialK seriesAC axialS seriesGeneralinformation❮ "V"53Ø9TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans237Contacts

EC axial fans mains-poweredS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 630 M3G 112-GAA1~ 200-277 50/60 970 0.73 3.30 135 -25 to +60L1)subject to alterations(1) Nominal data in operating point with maximum load and 230 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]160AA 1A 2A 39709709600.550.660.692.603.003.20747677—8879120800,2 0,4 0,687432A 4A 5A 6A 7A 8A 9A 10A 11A 129707507507507505405405405400.730.250.300.320.330.110.130.140.143.301.201.401.501.600.700.700.600.7079687071726163636368—928370—9285714012611109510 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000[m 3 /h]238

TechnologyAccessoriesEC-SYSTEMSAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)Interference immunity acc. to EN 61000-6-2 (industrial environment)Harmonics acc. to DIN EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 630-AE37 -11 W3G 630-CE37 -11 S3G 630-BE37 -11 S3G 630-AE37 -11Drawingsp. 242 f.Electr. connectionp. 427239Contacts

EC axial fans mains-poweredS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 630 M3G 112-GAA3~ 200-240 50/60 1010 0.83 3.00 150 -25 to +60L2)*3G 630 M3G 112-GAB3~ 380-480 50/60 1010 0.83 1.50 150 -25 to +60 L2)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]160AA 1A 2A 31010101010100.620.740.782.202.602.80757778—8777120800,2 0,4 0,61211847362A 4A 5A 6A 7A 8A 9A 10A 11A 1210109209008808606806806606500.830.450.510.490.510.200.220.220.233.001.802.001.802.000.801.001.001.0079737575766667676865—928368—499174401095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000[m 3 /h]240

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 630-AE42 -06 W3G 630-CE42 -06 S3G 630-BE42 -06 S3G 630-AE42 -06"V" A3G 630-AE31 -01 W3G 630-CE31 -01 S3G 630-BE31 -01 S3G 630-AE31 -01AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]16012080400,2 0,4 0,6121181047362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 1210101010101010109209008808606806806606500.620.740.780.830.450.510.490.510.200.220.220.231.101.301.401.500.901.000.901.000.400.500.500.50757778797375757666676768—877765—928368—499174Accessories EC-SYSTEMS ESM95 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000 [m 3 /h]TechnologyDrawingsp. 242 f.Electr. connectionp. 427241Contacts

EC axial fans mains-poweredS series, Ø 630, drawings for direction of air flow "V"Without attachments154±2139±2TypeA3G 630-AE37 -11A3G 630-AE42 -06A3G 630-AE31 -01Mass[kg]9.19.19.1Ø186±0,55x72˚Ø200±1Ø168 ±0,5Ø623+6-1,5Cable gland56,5194±2❮ "V"±0,65xM6Depth of screw12-16 mmWith full square nozzle215±3TypeW3G 630-CE37 -11W3G 630-CE42 -06W3G 630-CE31 -01Mass[kg]20.420.420.4Ø11Ø65320150❮ "V"750805With guard grille for full nozzleØ7TypeS3G 630-BE37 -11S3G 630-BE42 -06S3G 630-BE31 -01Mass[kg]12.812.812.8Ø671Ø656 +1,574 123122❮ "V"242

With guard grille for short nozzle162736,5TypeS3G 630-AE37 -11S3G 630-AE42 -06S3G 630-AE31 -01Mass[kg]14.614.614.6Ø698Ø750AC axial fansAC axialK seriesAC axialS seriesGeneralinformation❮ "V"35Ø9TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans243Contacts

EC axial fans mains-poweredS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 630 M3G 150-FF0°A3~ 200-240 50/60 1220 1.70 5.20 215 -25 to +60M)*3G 630 M3G 150-FF0°B3~ 380-480 50/60 1220 1.70 2.60 215 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa]2202001801601401201008060[in H 2O]0,2 0,4 0,60,8128114710362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 12122012201220122011001100110011009809809809801.301.521.601.700.951.111.181.240.670.790.830.884.004.805.005.203.003.603.603.802.202.402.602.80777678817574767972727376—777058—777058—77705840209 5 10 2500 50007500100004000 8000 12000 16000[CFM][m 3 /h]244

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 630-AG12 -13A3G 630-AG12 -14A3G 630-AG08 -03A3G 630-AG08 -04W3G 630-CG12 -13W3G 630-CG12 -14W3G 630-CG08 -03W3G 630-CG08 -04S3G 630-BG12 -13—S3G 630-BG08 -03—S3G 630-AG12 -13—S3G 630-AG08 -03—With guard grillefor full nozzle—S3G 630-CG12 -14—S3G 630-CG08 -04AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa]2202001801601401201008060[in H 2O]0,2 0,4 0,60,8128114710362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 12122012201220122011001100110011009809809809801.301.521.601.700.951.111.181.240.670.790.830.882.002.402.502.601.501.801.801.901.101.201.301.40777678817574767972727376—777058—777058—777058ESMEC-SYSTEMSAccessories40209 5 10 2500 50007500100004000 8000 12000 16000[CFM][m 3 /h]TechnologyDrawingsp. 248 ff.Electr. connectionp. 428245Contacts

EC axial fans mains-poweredS series, Ø 630– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 630 M3G 150-IF0°A3~ 200-240 50/60 1490 3.10 9.40 340 -25 to +60M)*3G 630 M3G 150-IF0°B3~ 380-480 50/60 1490 3.10 4.70 340 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]32028024020016012080400,2 0,4 0,6 0,8 1,0 1,2128411731062AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 121490149014901490140014001400140013001300130013002.352.772.943.101.952.302.442.551.561.841.952.047.208.409.009.406.007.007.407.804.805.606.006.20828284878080838579798184—746455—746455—7464559 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]246

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 630-AH07 -13A3G 630-AH07 -14A3G 630-AH02 -03A3G 630-AH02 -04W3G 630-CH07 -13W3G 630-CH07 -14W3G 630-CH02 -03W3G 630-CH02 -04S3G 630-BH07 -13—S3G 630-BH02 -03—S3G 630-AH07 -13—S3G 630-AH02 -03—With guard grillefor full nozzle—S3G 630-CH07 -14—S3G 630-CH02 -04AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]32028024020016012080400,2 0,4 0,6 0,8 1,0 1,24831271126109 5 10 4000 8000120004000 8000 12000 16000 20000B[CFM][m 3 /h]B 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 121490149014901490140014001400140013001300130013002.352.772.943.101.952.302.442.551.561.841.952.043.604.204.504.703.003.503.703.902.402.803.003.10828284878080838579798184—746455—746455—746455Technology Accessories EC-SYSTEMS ESMDrawingsp. 248 ff.Electr. connectionp. 428247Contacts

EC axial fans mains-poweredS series, Ø 630, drawings for direction of air flow "V"Without attachments70 184±3147±2Ø235-2Ø252±0,3TypeA3G 630-AG08 -03A3G 630-AG12 -13A3G 630-AH02 -03A3G 630-AH07 -13Mass[kg]23.023.026.026.0Ø627±2Cable gland249,5±18xM10Depth of screw20-25 mm8x45˚❮ "V"With full square nozzle241,5±5TypeW3G 630-CG08 -03W3G 630-CG12 -13W3G 630-CH02 -03W3G 630-CH07 -13Mass[kg]38.038.041.041.0Ø11Ø69620150750±1805-3❮ "V"With guard grille for full nozzleView X7,692156810TypeS3G 630-BG08 -03S3G 630-BG12 -13S3G 630-BH02 -03S3G 630-BH07 -13Mass[kg]27.527.530.530.5Ø655 +2-1Ø70925146,5±3103±3151±4❮ "V"248

With guard grille for short nozzle85±4TypeS3G 630-AG08 -03S3G 630-AG12 -13S3G 630-AH02 -03S3G 630-AH07 -13Mass[kg]26.526.529.529.5AC axial fansAC axialK seriesAC axialS seriesØ720Ø750Generalinformation5Ø10169±3❮ "V"80,5±3TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans249Contacts

EC axial fans mains-poweredS series, Ø 630, drawings for direction of air flow "A"Without attachments70 217±3147±2Ø235-2Ø252±0,3TypeA3G 630-AG08 -04A3G 630-AG12 -14A3G 630-AH02 -04A3G 630-AH07 -14Mass[kg]23.023.026.026.0Ø627±28x45˚Cable gland249,5±1"A" ❯8xM10Depth of screw20-25 mmWith full square nozzle302,5±5TypeW3G 630-CG08 -04W3G 630-CG12 -14W3G 630-CH02 -04W3G 630-CH07 -14Mass[kg]39.039.042.042.0Ø11Ø69620150750±1805-3"A" ❯With guard grille for full nozzle134,5±4TypeS3G 630-CG08 -04S3G 630-CG12 -14S3G 630-CH02 -04S3G 630-CH07 -14Mass[kg]28.528.531.531.5Ø720Ø750152,5±3597±310"A" ❯250

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation251Contacts

EC axial fans mains-poweredS series, Ø 650– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 650 M3G 112-GAA1~ 200-277 50/60 890 0.66 3.00 90 -25 to +60L1)subject to alterations(1) Nominal data in operating point with maximum load and 230 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]AAA129109000.550.632.502.907677—90140A 38900.663.007978A 4—————120A 5A 68308300.410.481.902.207375—9110080600,2 0,412811732A 7A 8A 9A 10A 11A 128208106506406406300.490.510.190.230.240.252.302.300.901.101.101.207676676869708465—958667406201095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000[m 3 /h]252

TechnologyAccessoriesEC-SYSTEMSAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-4 (industrial environment)Interference immunity acc. to EN 61000-6-2 (industrial environment)Harmonics acc. to DIN EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 650-AE34 -11 W3G 650-CE34 -01 S3G 650-BE34 -11 S3G 650-AE34 -11Drawingsp. 256 f.Electr. connectionp. 427253Contacts

EC axial fans mains-poweredS series, Ø 650– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: PA plasticRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 427*3G 650 M3G 112-GAA3~ 200-240 50/60 910 0.72 2.60 125 -25 to +60L2)*3G 650 M3G 112-GAB3~ 380-480 50/60 910 0.72 1.30 125 -25 to +60 L2)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]AAA129109100.530.621.802.207577—87140A 39100.662.4078741204A 4A 5A 69108308100.720.390.432.601.601.6079737460—9110080600,2 0,4128732A 7A 8A 9A 10A 11A 127907906306206006100.430.460.170.190.190.211.601.800.800.800.800.807475666767677962—94836340116201095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000[m 3 /h]254

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOST; CCC is applied forAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V" ❮ "V"❮ "V"❮ "V"With fullWith guard grillesquare nozzle for full nozzleWithoutattachmentsWith guard grillefor short nozzle"V" A3G 650-AE44 -06 W3G 650-CE44 -06 S3G 650-BE44 -06 S3G 650-AE44 -08"V" A3G 650-AE35 -01 W3G 650-CE35 -01 S3G 650-BE35 -01 S3G 650-AE35 -01AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]1401201008060400,2 0,41211847362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 129109109109108308107907906306206006100.530.620.660.720.390.430.430.460.170.190.190.210.901.101.201.300.800.800.800.900.400.400.400.40757778797374747566676767—877460—917962—948363Accessories EC-SYSTEMS ESM201095 10 2000 4000 6000[CFM]2000 4000 6000 8000 10000 12000 [m 3 /h]TechnologyDrawingsp. 256 f.Electr. connectionp. 427255Contacts

EC axial fans mains-poweredS series, Ø 650, drawings for direction of air flow "V"Without attachments157±2141±2TypeA3G 650-AE34 -11A3G 650-AE44 -06A3G 650-AE35 -01Mass[kg]9.29.29.2Ø186±0,55x72˚Ø200±1Ø168 ±0,5Ø648±2Cable gland19456,5±2❮ "V"±0,65xM6Depth of screw12-16 mmWith full square nozzle216±3TypeW3G 650-CE34 -01W3G 650-CE44 -06W3G 650-CE35 -01Mass[kg]21.521.521.5Ø14,5Ø67714150❮ "V"810863With guard grille for full nozzleØ7TypeS3G 650-BE34 -11S3G 650-BE44 -06S3G 650-BE35 -01Mass[kg]13.113.113.1Ø694Ø679 +1,575 125121❮ "V"256

With guard grille for short nozzle162739TypeS3G 650-AE34 -11S3G 650-AE44 -08S3G 650-AE35 -01Mass[kg]14.714.714.7Ø698Ø750AC axial fansAC axialK seriesAC axialS seriesGeneralinformation❮ "V"35Ø9TechnologyAccessoriesEC-SYSTEMSESMAC axialA seriesQ-motorEC axialS seriesEC axial fans257Contacts

EC axial fans mains-poweredS series, Ø 650– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 650 M3G 150-FF-5°A3~ 200-240 50/60 1250 1.65 5.20 240 -25 to +60M)*3G 650 M3G 150-FF-5°B3~ 380-480 50/60 1250 1.65 2.60 240 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa]240220[in H 2O]4AA 1A 2A 3A 412501250125012501.071.381.521.653.204.204.605.2078788083—8271592001801601401201008060400,2 0,4 0,60,812811710362A 5A 6A 7A 8A 9A 10A 11A 1211001100110011009509509509500.730.941.031.120.470.600.670.722.202.803.203.401.401.802.002.207675778072727477—827159—827159209 5 10 2500 50007500100004000 8000 12000 16000[CFM][m 3 /h]258

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 650-AJ12 -13A3G 650-AJ12 -14A3G 650-AJ08 -03A3G 650-AJ08 -04W3G 650-CJ12 -13W3G 650-CJ12 -14W3G 650-CJ08 -03W3G 650-CJ08 -04S3G 650-BJ12 -13—S3G 650-BJ08 -03—————With guard grillefor full nozzle—S3G 650-CJ12 -14—S3G 650-CJ08 -04AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa]240220[in H 2O]4BB 1B 2B 3B 412501250125012501.071.381.521.651.602.102.302.6078788083—827159ESM2001801601401201008060400,2 0,4 0,60,812811710362B 5B 6B 7B 8B 9B 10B 11B 1211001100110011009509509509500.730.941.031.120.470.600.670.721.101.401.601.700.700.901.001.107675778072727477—827159—827159Accessories EC-SYSTEMS209 5 10 2500 50007500100004000 8000 12000 16000[CFM][m 3 /h]TechnologyDrawingsp. 262 ff.Electr. connectionp. 428259Contacts

EC axial fans mains-poweredS series, Ø 650– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 650 M3G 150-IF-5°A3~ 200-240 50/60 1500 2.87 8.80 350 -25 to +60M)*3G 650 M3G 150-IF-5°B3~ 380-480 50/60 1500 2.87 4.40 350 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]36032028024020016012080400,2 0,4 0,6 0,8 1,0 1,2 1,4128114710362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 121500150015001500135013501350135012001200120012001.862.372.652.871.351.731.932.090.951.211.351.475.607.208.008.804.205.205.806.403.003.604.204.40828284878080828578777982—827059—827059—8270599 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]260

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 650-AK07 -13A3G 650-AK07 -14A3G 650-AK02 -03A3G 650-AK02 -04W3G 650-CK07 -13W3G 650-CK07 -14W3G 650-CK02 -03W3G 650-CK02 -04S3G 650-BK07 -13—S3G 650-BK02 -03—————With guard grillefor full nozzle—S3G 650-CK07 -14—S3G 650-CK02 -04AC axialA seriesEC axial fansEC axialS seriesCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]36032028024020016012080400,2 0,4 0,6 0,8 1,0 1,2 1,44831272116109 5 10 4000 8000120004000 8000 12000 16000 20000B[CFM][m 3 /h]B 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 121500150015001500135013501350135012001200120012001.862.372.652.871.351.731.932.090.951.211.351.472.803.604.004.402.102.602.903.201.501.802.102.20828284878080828578777982—827059—827059—827059Technology Accessories EC-SYSTEMS ESMDrawingsp. 262 ff.Electr. connectionp. 428261Contacts

EC axial fans mains-poweredS series, Ø 650, drawings for direction of air flow "V"Without attachments70 179±3133±2Ø235-2Ø252±0,3TypeA3G 650-AJ12 -13A3G 650-AJ08 -03A3G 650-AK07 -13A3G 650-AK02 -03Mass[kg]23.523.526.526.5Ø652±2Cable gland249,5±18xM10Depth of screw20-25 mm8x45˚❮ "V"With full square nozzle244±5TypeW3G 650-CJ12 -13W3G 650-CJ08 -03W3G 650-CK07 -13W3G 650-CK02 -03Mass[kg]40.040.043.043.0Ø14,5Ø72220150810±1863-3❮ "V"With guard grille for full nozzleView X7,692156810TypeS3G 650-BJ12 -13S3G 650-BJ08 -03S3G 650-BK07 -13S3G 650-BK02 -03Mass[kg]28.528.531.531.5Ø679 +2-1Ø72325146,5±3103±3146±4❮ "V"262

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation263Contacts

EC axial fans mains-poweredS series, Ø 650, drawings for direction of air flow "A"Without attachments70 207±3133±2Ø235-2Ø252±0,3TypeA3G 650-AJ12 -14A3G 650-AJ08 -04A3G 650-AK07 -14A3G 650-AK02 -04Mass[kg]23.523.526.526.5Ø652±28x45˚Cable gland249,5±1"A" ❯8xM10Depth of screw20-25 mmWith full square nozzle300±5TypeW3G 650-CJ12 -14W3G 650-CJ08 -04W3G 650-CK07 -14W3G 650-CK02 -04Mass[kg]41.041.044.044.0Ø14,5Ø72220150810±1863-3"A" ❯With guard grille for full nozzle127±4TypeS3G 650-CJ12 -14S3G 650-CJ08 -04S3G 650-CK07 -14S3G 650-CK02 -04Mass[kg]29.529.532.532.5Ø760Ø790150±3599,5±3"A" ❯10264

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation265Contacts

EC axial fans mains-poweredS series, Ø 710– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencyTypeMotorVAC Hz rpm kW A Pa °C*3G 710 M3G 150-FFA3~ 200-240 50/60 1050 1.68 5.20 160 -25 to +60*3G 710 M3G 150-FFB3~ 380-480 50/60 1050 1.68 2.60 160 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurves160140120100800,4 0,6124871110632600,2Speed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionp. 4280°M)0°n[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 1210501050105010509509509509508508508508501.261.571.631.680.941.171.221.250.670.840.870.903.804.805.005.202.803.603.803.802.002.602.602.80767677797474757772727374—736863—736863—73686340209 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]266

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 710-AG09 -13A3G 710-AG09 -14A3G 710-AG01 -03A3G 710-AG01 -04W3G 710-CG09 -13W3G 710-CG09 -14W3G 710-CG01 -03W3G 710-CG01 -04S3G 710-BG09 -13—S3G 710-BG01 -03—S3G 710-AG09 -13—S3G 710-AG01 -03—With guard grillefor full nozzle—S3G 710-CG09 -14—S3G 710-CG01 -04AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]1601401201008060400,4 0,60,2124871110632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 1210501050105010509509509509508508508508501.261.571.631.680.941.171.221.250.670.840.870.901.902.402.502.601.401.801.901.901.001.301.301.40767677797474757772727374—736863—736863—736863Accessories EC-SYSTEMS ESM209 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]TechnologyDrawingsp. 270 ff.Electr. connectionp. 428267Contacts

EC axial fans mains-poweredS series, Ø 710– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 710 M3G 150-IF0°A3~ 200-240 50/60 1240 2.75 8.50 255 -25 to +60M)*3G 710 M3G 150-IF0°B3~ 380-480 50/60 1240 2.75 4.20 255 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]24020016012080400,2 0,4 0,6 0,8 1,0128111047632AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 12124012401240124011001100110011009609609609601.992.472.592.701.391.721.811.890.921.151.201.256.007.507.808.404.205.205.405.602.803.403.603.80808081847777798274747679—746761—746761—7467610 4000 80005120005000 10000 15000 20000 250009116000 [CFM][m 3 /h]268

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 710-AH10 -13A3G 710-AH10 -14A3G 710-AH06 -03A3G 710-AH06 -04W3G 710-CH10 -13W3G 710-CH10 -14W3G 710-CH06 -03W3G 710-CH06 -04S3G 710-BH10 -13—S3G 710-BH06 -03—S3G 710-AH10 -13—S3G 710-AH06 -03—With guard grillefor full nozzle—S3G 710-CH10 -14—S3G 710-CH06 -04EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa]2402001601208040[in H 2O]0,2 0,4 0,6 0,8 1,0128111047632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 12124012401240124011001100110011009609609609601.992.472.592.701.391.721.811.890.921.151.201.253.003.703.904.202.102.602.702.801.401.701.801.90808081847777798274747679—746761—746761—746761Accessories EC-SYSTEMS ESM0 4000 80005120005000 10000 15000 20000 250009116000 [CFM][m 3 /h]TechnologyDrawingsp. 270 ff.Electr. connectionp. 428269Contacts

EC axial fans mains-poweredS series, Ø 710, drawings for direction of air flow "V"Without attachments70 184±3147±2Ø235-2Ø252±0,3TypeA3G 710-AG09 -13A3G 710-AG01 -03A3G 710-AH10 -13A3G 710-AH06 -03Mass[kg]24.024.027.027.0Ø703±2Cable gland249,5±18xM10Depth of screw20-25 mm8x45˚❮ "V"With full square nozzle270±5TypeW3G 710-CG09 -13W3G 710-CG01 -03W3G 710-CH10 -13W3G 710-CH06 -03Mass[kg]43.543.546.546.5Ø14,5Ø77220170810±1850-3❮ "V"With guard grille for full nozzleView X7,692156810TypeS3G 710-BG09 -13S3G 710-BG01 -03S3G 710-BH10 -13S3G 710-BH06 -03Mass[kg]29.529.532.532.5Ø733 +2-1Ø77925140±3109,5±3 144,5±4❮ "V"270

With guard grille for short nozzle41±4TypeS3G 710-AG09 -13S3G 710-AG01 -03S3G 710-AH10 -13S3G 710-AH06 -03Mass[kg]28.028.031.031.0AC axial fansAC axialK seriesAC axialS seriesØ823Ø853Generalinformation5Ø10213±3❮ "V"36,5±3TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans271Contacts

EC axial fans mains-poweredS series, Ø 710, drawings for direction of air flow "A"Without attachments70 217±3147±2Ø235-2Ø252±0,3TypeA3G 710-AG09 -14A3G 710-AG01 -04A3G 710-AH10 -14A3G 710-AH06 -04Mass[kg]24.024.027.027.0Ø703±28x45˚Cable gland249,5±1"A" ❯8xM10Depth of screw20-25 mmWith full square nozzle294±5TypeW3G 710-CG09 -14W3G 710-CG01 -04W3G 710-CH10 -14W3G 710-CH06 -04Mass[kg]44.544.547.547.5Ø14,5Ø77220170810±1850-3"A" ❯With guard grille for full nozzle163±4TypeS3G 710-CG09 -14S3G 710-CG01 -04S3G 710-CH10 -14S3G 710-CH06 -04Mass[kg]30.530.533.533.5Ø823Ø853510124±3125,5±3"A" ❯272

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation273Contacts

EC axial fans mains-poweredS series, Ø 800– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 800 M3G 150-FF0°A3~ 200-240 50/60 830 1.35 4.40 155 -25 to +60M)*3G 800 M3G 150-FF0°B3~ 380-480 50/60 830 1.35 2.20 155 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]16014012010080600,4 0,61281147362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 128308308308307507507507506706706706700.881.131.241.350.650.830.910.990.460.600.650.712.803.403.804.402.002.602.803.001.401.802.002.20727072776968707567666872—756757—756757—7567570,21040209 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]274

AC axial fansAC axialS seriesEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 800-AG10 -13A3G 800-AG10 -14A3G 800-AG02 -03A3G 800-AG02 -04W3G 800-CG10 -13W3G 800-CG10 -14W3G 800-CG02 -03W3G 800-CG02 -04S3G 800-BG10 -13—S3G 800-BG02 -03—S3G 800-AG10 -13—S3G 800-AG02 -03—With guard grillefor full nozzle—S3G 800-CG10 -14—S3G 800-CG02 -04AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]1601401201008060400,4 0,60,2128114710362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 128308308308307507507507506706706706700.881.131.241.350.650.830.910.990.460.600.650.711.401.701.902.201.001.301.401.500.700.901.001.10727072776968707567666872—756757—756757—756757Accessories EC-SYSTEMS ESM209 5 10 4000 8000120004000 8000 12000 16000 20000[CFM][m 3 /h]TechnologyDrawingsp. 278 ff.Electr. connectionp. 428275Contacts

EC axial fans mains-poweredS series, Ø 800– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 800 M3G 150-IF0°A3~ 200-240 50/60 980 2.20 6.80 230 -25 to +60M)*3G 800 M3G 150-IF0°B3~ 380-480 50/60 980 2.20 3.40 230 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]20016012080400,2 0,4 0,6 0,8128411731062AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 129809809809809009009009008208208208201.371.761.932.201.061.361.501.710.801.031.131.304.205.405.806.803.204.204.305.202.403.203.404.00747376827372738071707378—786752—786752—7867520 4000 80009120005000 10000 15000 20000 250005116000 [CFM][m 3 /h]276

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 800-AH12 -13A3G 800-AH12 -14A3G 800-AH03 -03A3G 800-AH03 -04W3G 800-CH12 -13W3G 800-CH12 -14W3G 800-CH03 -03W3G 800-CH03 -04S3G 800-BH12 -13—S3G 800-BH03 -03—S3G 800-AH12 -13—S3G 800-AH03 -03—With guard grillefor full nozzle—S3G 800-CH12 -14—S3G 800-CH03 -04AC axialA seriesEC axialS seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]20016012080400,2 0,4 0,6 0,8128411731062BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 129809809809809009009009008208208208201.371.761.932.201.061.361.501.710.801.031.131.302.102.702.903.401.602.102.302.601.201.601.702.00747376827372738071707378—786752—786752—786752Accessories EC-SYSTEMS ESM0 4000 80009120005000 10000 15000 20000 250005116000 [CFM][m 3 /h]TechnologyDrawingsp. 278 ff.Electr. connectionp. 428277Contacts

EC axial fans mains-poweredS series, Ø 800, drawings for direction of air flow "V"Without attachments70 184±3147±2Ø235-2Ø252±0,3TypeA3G 800-AG10 -13A3G 800-AG02 -03A3G 800-AH12 -13A3G 800-AH03 -03Mass[kg]25.025.028.028.0Ø788±2Cable gland249,5±18xM10Depth of screw20-25 mm8x45˚❮ "V"With full square nozzle287±5TypeW3G 800-CG10 -13W3G 800-CG02 -03W3G 800-CH12 -13W3G 800-CH03 -03Mass[kg]46.546.549.549.5Ø14,5Ø85717190910±1970-3❮ "V"With guard grille for full nozzleView X7,692156815TypeS3G 800-BG10 -13S3G 800-BG02 -03S3G 800-BH12 -13S3G 800-BH03 -03Mass[kg]31.531.534.534.5Ø817 +2-1Ø86125137±3112,5±3 141,5±4❮ "V"278

With guard grille for short nozzle27±4TypeS3G 800-AG10 -13S3G 800-AG02 -03S3G 800-AH12 -13S3G 800-AH03 -03Mass[kg]30.030.033.033.0AC axial fansAC axialK seriesAC axialS seriesØ930Ø960Generalinformation5Ø10227±3❮ "V"22,5±3TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans279Contacts

EC axial fans mains-poweredS series, Ø 800, drawings for direction of air flow "A"Without attachments70 217±3147±2Ø235-2Ø252±0,3TypeA3G 800-AG10 -14A3G 800-AG02 -04A3G 800-AH12 -14A3G 800-AH03 -04Mass[kg]25.025.028.028.0Ø788±28x45˚Cable gland249,5±1"A" ❯8xM10Depth of screw20-25 mmWith full square nozzle297±5TypeW3G 800-CG10 -14W3G 800-CG02 -04W3G 800-CH12 -14W3G 800-CH03 -04Mass[kg]47.547.550.550.5Ø14,5Ø85717190910±1970-3"A" ❯With guard grille for full nozzle180±4TypeS3G 800-CG10 -14S3G 800-CG02 -04S3G 800-CH12 -14S3G 800-CH03 -04Mass[kg]32.532.535.535.5Ø930Ø960510107±3142,5±3"A" ❯280

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation281Contacts

EC axial fans mains-poweredS series, Ø 910– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 910 M3G 150-FF0°A3~ 200-240 50/60 720 1.15 3.60 100 -25 to +60M)*3G 910 M3G 150-FF0°B3~ 380-480 50/60 720 1.15 1.80 100 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]100806040200,1 0,2 0,3 0,4128114710362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 127207207207206506506506505805805805800.770.991.081.150.560.720.780.840.400.510.550.602.403.003.403.601.802.202.402.601.201.601.801.80727171727068687067666668—757064—757064—7570640 4000 80009120005000 10000 15000 20000 250005116000 [CFM][m 3 /h]282

AC axial fansEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 910-AG10 -13A3G 910-AG10 -14A3G 910-AG02 -03A3G 910-AG02 -04W3G 910-CG10 -13W3G 910-CG10 -14W3G 910-CG02 -03W3G 910-CG02 -04S3G 910-BG10 -13—S3G 910-BG02 -03—S3G 910-AG10 -13—S3G 910-AG02 -03—With guard grillefor full nozzleAC axialA series—S3G 910-CG10 -14—S3G 910-CG02 -04EC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]100806040200,1 0,2 0,3 0,4128114710362BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 127207207207206506506506505805805805800.770.991.081.150.560.720.780.840.400.510.550.601.201.501.701.800.901.101.201.300.600.800.900.90727171727068687067666668—757064—757064—757064Accessories EC-SYSTEMS ESM0 4000 80009120005000 10000 15000 20000 250005116000 [CFM][m 3 /h]TechnologyDrawingsp. 288 ff.Electr. connectionp. 428283Contacts

EC axial fans mains-poweredS series, Ø 910– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 910 M3G 150-IF0°A3~ 200-240 50/60 870 1.90 5.80 140 -25 to +60M)*3G 910 M3G 150-IF0°B3~ 380-480 50/60 870 1.90 2.90 140 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]1404AA 1A 2A 3A 48708708708701.301.621.761.904.005.005.405.8076757577—7471661201000,4 0,51283A 5A 6A 7A 88008008008001.011.261.351.463.203.804.204.4074737375—74716680600,2 0,31171062A 9A 10A 11A 127307307307300.770.761.031.112.403.003.203.4072717173—74716640200,19 5 10 4000 800012000160005000 10000 15000 20000 25000 30000[CFM][m 3 /h]284

Generalinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow"V""A""V""A"❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachmentsA3G 910-AH09 -13A3G 910-AH09 -14A3G 910-AH04 -03A3G 910-AH04 -04W3G 910-CH09 -13W3G 910-CH09 -14W3G 910-CH04 -03W3G 910-CH04 -04S3G 910-BH09 -13—S3G 910-BH04 -03—S3G 910-AH09 -13—S3G 910-AH04 -03—With guard grillefor full nozzle—S3G 910-CH09 -14—S3G 910-CH04 -04EC axialS seriesAC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%]Q-motor[Pa][in H 2O]1404BB 1B 2B 3B 48708708708701.301.621.761.902.002.502.702.9076757577—747166ESM1201008060400,4 0,50,2 0,312811710362B 5B 6B 7B 8B 9B 10B 11B 128008008008007307307307301.011.261.351.460.770.761.031.111.601.902.102.201.201.501.601.707473737572717173—747166—747166Accessories EC-SYSTEMS200,19 5 10 4000 800012000160005000 10000 15000 20000 25000 30000[CFM][m 3 /h]TechnologyDrawingsp. 288 ff.Electr. connectionp. 428285Contacts

EC axial fans mains-poweredS series, Ø 910– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 5– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataBlade angleCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 910 M3G 150-NA0°A3~ 380-480 50/60 980 2.80 4.30 220 -25 to +60M)subject to alterations(1) Nominal data in operating point with maximum load and 400 VACCurvesn[rpm]P 1[kW]I[A]Lw A[dB(A)] tL[%][Pa][in H 2O]2202001801601401201008060400,2 0,4 0,6 0,8128411731062AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 129809809809809009009009008208208208201.822.242.552.801.411.761.972.151.071.311.491.632.803.403.904.302.202.603.003.301.602.002.302.50808083867878828476768082—736556—736556—736556209 50 4000 800012000160005000 10000 15000 20000 25000 300001[CFM][m 3 /h]286

TechnologyAccessoriesAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansEC-SYSTEMSESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOSTDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachments"V" A3G 910-AI02 -03"A" A3G 910-AI02 -04W3G 910-CI02 -03W3G 910-CI02 -04S3G 910-BI02 -03—S3G 910-AI02 -03—With guard grillefor full nozzle—S3G 910-CI02 -04Drawingsp. 288 ff.Electr. connectionp. 428287Contacts

EC axial fans mains-poweredS series, Ø 910, drawings for direction of air flow "V"Without attachments70 188±3123±2Ø235-2Ø252±0,3TypeA3G 910-AG10 -13A3G 910-AG02 -03A3G 910-AH09 -13A3G 910-AH04 -03A3G 910-AI02 -03Mass[kg]25.525.528.528.533.0g249.5249.5249.5249.5284.5Ø905±2Cable glandg±18xM10Depth of screw20-25 mm8x45˚❮ "V"With full square nozzle305±5TypeW3G 910-CG10 -13W3G 910-CG02 -03W3G 910-CH09 -13W3G 910-CH04 -03W3G 910-CI02 -03Mass[kg]51.051.054.054.058.5Ø14,5Ø976202051010±11070-3❮ "V"With guard grille for full nozzleView X10116207615TypeS3G 910-BG10 -13S3G 910-BG02 -03S3G 910-BH09 -13S3G 910-BH04 -03S3G 910-BI02 -03Mass[kg]34.034.037.037.041.5t134.5134.5134.5134.5169.5Ø931 +2-1Ø97629t±3115±3143±4❮ "V"288

With guard grille for short nozzle26±4TypeS3G 910-AG10 -13S3G 910-AG02 -03S3G 910-AH09 -13S3G 910-AH04 -03S3G 910-AI02 -03Mass[kg]36.036.039.039.043.5v19.519.519.519.554.5AC axialK seriesØ1045Ø1075GeneralinformationAC axial fansAC axialS series5230±3❮ "V"vØ10TechnologyAccessoriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fans289Contacts

EC axial fans mains-poweredS series, Ø 910, drawings for direction of air flow "A"Without attachments70 189±3123±2Ø235-2Ø252±0,3TypeA3G 910-AG10 -14A3G 910-AG02 -04A3G 910-AH09 -14A3G 910-AH04 -04A3G 910-AI02 -04Mass[kg]25.525.528.528.533.0g249.5249.5249.5249.5284.5Ø905±28x45˚Cable glandg±18xM10Depth of screw20-25 mm"A" ❯With full square nozzle294±5TypeW3G 910-CG10 -14W3G 910-CG02 -04W3G 910-CH09 -14W3G 910-CH04 -04W3G 910-CI02 -04Mass[kg]52.052.055.055.059.5Ø14,5Ø976202051010±11070-3"A" ❯With guard grille for full nozzle170±4TypeS3G 910-CG10 -14S3G 910-CG02 -04S3G 910-CH09 -14S3G 910-CH04 -04S3G 910-CI02 -04Mass[kg]35.035.038.038.042.5t160.5160.5160.5160.5195.5Ø1045Ø107589±35t±310"A" ❯290

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation291Contacts

EC axial fans mains-poweredS series, Ø 990– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 7– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 990 M3G 150-FFA3~ 200-240 50/60 545 0.90 3.80 90 -25 to +60M)*3G 990 M3G 150-FFB3~ 380-480 50/60 545 0.90 1.90 90 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lp A[dB(A)] tL[%][Pa]120100806040200,1 0,20,3 0,4 [in H 2O]1284117632AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 125455455455454504504504503803803803800.630.740.810.880.360.420.460.500.220.260.280.312.402.602.803.001.401.601.801.800.801.001.201.20707171706566666561616161—727057—727057—727057109 5 10 3000 6000 9000 12000 15000 180005000 15000 25000[CFM][m 3 /h]292

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, CCC, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachments"V" A3G 990-AC04 -13"A" A3G 990-AC04 -14"V""A"A3G 990-AC03 -03A3G 990-AC03 -04W3G 990-CC04 -13W3G 990-CC04 -14W3G 990-CC03 -03W3G 990-CC03 -04S3G 990-BC04 -13—S3G 990-BC03 -03—————With guard grillefor full nozzle—S3G 990-CC04 -14—S3G 990-CC03 -04AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]120100806040200,1 0,20,3 0,4 [in H 2O]1281147632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 125455455455454504504504503803803803800.630.740.810.880.360.420.460.500.220.260.280.311.201.301.401.500.700.800.900.900.400.500.600.60707171706566666561616161—727057—727057—727057Accessories EC-SYSTEMS ESM0 3000 6000 90005 112000 15000 180005000 15000 25000109[CFM][m 3 /h]TechnologyDrawingsp. 298 f.Electr. connectionp. 428293Contacts

EC axial fans mains-poweredS series, Ø 990– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 7– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 990 M3G 150-IFA3~ 200-240 50/60 650 1.50 4.80 120 -25 to +60M)*3G 990 M3G 150-IFB3~ 380-480 50/60 650 1.50 2.60 120 -25 to +60 M)subject to alterations(1) Nominal data in operating point with maximum load and 200 or 400 VACCurvesn[rpm]P 1[kW]I[A]Lp A[dB(A)] tL[%][Pa]120100806040200,1 0,20,3 0,4 [in H 2O]128114107632AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 126506506506505405405405404504504504501.021.211.321.440.600.710.780.840.360.420.460.503.604.004.404.602.202.602.803.001.401.601.801.80757676757071717065666665—727057—727057—72705795 10 3000 6000 9000 12000 15000 180005000 15000 25000[CFM][m 3 /h]294

EC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: UL, CSA, GOST; B also VDEAC axial fansAC axialS seriesAC axialK seriesDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachments"V" A3G 990-AD11 -13"A" A3G 990-AD11 -14"V""A"A3G 990-AD05 -03A3G 990-AD05 -04W3G 990-CD11 -13W3G 990-CD11 -14W3G 990-CD05 -03W3G 990-CD05 -04S3G 990-BD11 -13—S3G 990-BD05 -03—————With guard grillefor full nozzle—S3G 990-CD11 -14—S3G 990-CD05 -04AC axialA seriesEC axial fansCurvesn[rpm]P 1[kW]I[A]Lp A[dB(A)] tL[%]Q-motor[Pa]120100806040200,1 0,20,3 0,4 [in H 2O]128114107632BB 1B 2B 3B 4B 5B 6B 7B 8B 9B 10B 11B 126506506506505405405405404504504504501.021.211.321.440.600.710.780.840.360.420.460.501.802.002.202.301.101.301.401.500.700.800.900.90757676757071717065666665—727057—727057—727057Accessories EC-SYSTEMS ESM0 3000 6000 900095 112000 15000 180005000 15000 25000[CFM][m 3 /h]TechnologyDrawingsp. 298 f.Electr. connectionp. 428295Contacts

EC axial fans mains-poweredS series, Ø 990– Material: Guard grille: Steel, phosphated and coated in black plasticWall ring: Sheet steel, pre-galvanised and coated in black plasticBlades: Die-cast aluminiumRotor: Cast-in with PA plasticElectronics enclosure: Die-cast aluminium, coated in black– Number of blades: 7– Direction of rotation: Dir. of air flow "V" clockwise, "A" counter-clockwise, seen on rotor– Type of protection: IP 54 (acc. to EN 60529)– Insulation class: "F"– Mounting position: Shaft horizontal or rotor on bottom; rotor on top on request– Condensate discharges: Rotor-side– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominalvoltage rangeFrequencySpeed/rpmMax. powerinput (1)Max. currentdraw (1)Max. operative rangePerm. amb. temp.Electr. connectionTypeMotorVAC Hz rpm kW A Pa °Cp. 428*3G 990 M3G 150-NAA3~ 380-480 50/60 720 2.00 3.00 150 -25 to +60M)subject to alterations(1) Nominal data in operating point with maximum load and 400 VACCurvesn[rpm]P 1[kW]I[A]Lp A[dB(A)] tL[%][Pa]140120100806040200,1 0,2 0,3 0,4 0,5[in H 2O]128411710362AA 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 127207207207206556556556555805805805801.471.721.891.991.101.291.401.510.770.900.971.052.202.602.903.001.702.002.102.301.201.401.501.60747577787273747673747577—797360—757360—7573609 5 10 3000 6000 9000 12000 15000 18000 [CFM]5000 15000 25000[m 3 /h]296

TechnologyAccessoriesAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansEC-SYSTEMSESMQ-motorEC axialS seriesGeneralinformation– Technical features: • Slave output 0-10 V max. 3 mA • Line undervoltage / phase failure detection• PFC (active) • Output 20 VDC (±20 %) max. 50 mA • Motor current limitation• Integrated PID controller • Output 10 VDC (+10 %) max. 10 mA • Over-temperature protected electronics / motor• Control input 0-10 VDC / PWM • RS485 ebmBUS • Locked rotor protection• Input for sensor 0-10 V or 4-20 mA • Alarm relay • Soft start– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-2Harmonics acc. to EN 61000-3-2/3– Leakage current: < 3.5 mA acc. to EN 61800-5-1– Connection leads: Via terminal strip– Protection class: I (acc. to EN 61800-5-1)– Product conforming to standard: CE– Approvals: VDE, UL, CSA, GOSTDirection of air flow❮ "V"/ "A" ❯ ❮ "V"/ "A" ❯ ❮ "V" ❮ "V" "A" ❯With fullWith guard grille With guard grillesquare nozzle for full nozzle for short nozzleWithoutattachments"V" A3G 990-AE03 -03"A" A3G 990-AE03 -04W3G 990-CE03 -03W3G 990-CE03 -04S3G 990-BE03 -03———With guard grillefor full nozzle—S3G 990-CE03 -04Drawingsp. 298 f.Electr. connectionp. 428297Contacts

EC axial fans mains-poweredS series, Ø 990, drawings for direction of air flow "V"Without attachmentsTypeMass[kg]g70 152 ±3130,5 ±2Ø235 -2Ø252±0,3A3G 990-AC04 -13A3G 990-AC03 -03A3G 990-AD11 -13A3G 990-AD05 -03A3G 990-AE03 -0326.526.530.530.535.0219.5219.5249.5249.5284.5990±2Øg ±18xM108x45˚Cable gland❮ "V"Depth of screw20-25 mmWith full square nozzle287,5 ±5TypeW3G 990-CC04 -13W3G 990-CC03 -03W3G 990-CD11 -13W3G 990-CD05 -03W3G 990-CE03 -03Mass[kg]55.055.059.059.063.5Ø14,5Ø101720 ±120511101170-3❮ "V"With guard grille for full nozzleTypeMass[kg]t124,5 ±4View X15107620116S3G 990-BC04 -13S3G 990-BC03 -03S3G 990-BD11 -13S3G 990-BD05 -03S3G 990-BE03 -0336.536.540.540.545.0122.0122.0152.0152.0187.01018 +2-11064ØØ29t ±397,5±3❮ "V"298

EC axial fans mains-poweredS series, Ø 990, drawings for direction of air flow "A"GeneralinformationWithout attachments70170 ±3130,5 ±2Ø235 -2Ø252±0,3TypeA3G 990-AC04 -14A3G 990-AC03 -04A3G 990-AD11 -14A3G 990-AD05 -04A3G 990-AE03 -04Mass[kg]26.526.530.530.535.0g219.5219.5249.5249.5284.5AC axial fansAC axialS seriesg ±1AccessoriesEC axialS seriesØ 990 ±28xM108x45˚AC axialK seriesCable gland"A" ❯Depth of screw20-25 mmAC axialA seriesWith full square nozzle255±5TypeW3G 990-CC04 -14W3G 990-CC03 -04W3G 990-CD11 -14W3G 990-CD05 -04W3G 990-CE03 -04Mass[kg]56.056.060.060.064.5Ø1017EC axial fansQ-motorESMEC-SYSTEMS202051110±11170-3Ø14,5"A" ❯With guard grille for full nozzle5 150±4TypeS3G 990-CC04 -14S3G 990-CC03 -04S3G 990-CD11 -14S3G 990-CD05 -04S3G 990-CE03 -04Mass[kg]37.537.541.541.546.0t169.5169.5199.5199.5234.5Ø1095Ø114050±3 t±310Technology"A" ❯299Contacts

Table of optionsStandardMulti-functionFrigoPlug terminalUL and CSA= available ex stockPage 302 Page 304 Page 305 Page 306 Page 307Foot measure18 mm (height 48 mm)26 mm (height 51 mm)A side (3 x M4, Ø 71.4 mm)●●● ● ● ●●MountB side (3 x M4, Ø 71.4 mm)●●Electr. terminalsThread ends, A side (4 x M4)Jacketed cable (3 x 0.5 mm 2 )Plug terminal (3 x 0.5 mm 2 )UL jacketed cable (3 x AWG20)● ● ● ● ●450 mm 1500 mm 1500 mm●450 mm300

Square shaded-pole motors (Q-motors)GeneralinformationStandard design 302Multi-function design 304Frigo design 305Plug terminal design 306UL and CSA design 307Air performance curves 308TechnologyAC axial fansAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA series301Contacts

Square shaded-pole motorsStandard design– Foot mounting: Track dimension 26 mm (height 51 mm)– Type of protection: IP 42– Electrical connection: Jacketed cable 3 x 0.5 mm 2 with brass lead tips– Product conforming to standard: CE– Approvals: VDE– Curves: Page 308Nominal dataCombination:Motor axial impellerCurveNominal voltageFrequencySpeed/rpmPower outputPower inputCurrent drawPerm. amb. temp.MassDimensionsTypeVAC Hz rpm W W A °C kg B E KM4Q045-BD01 -01AAB1~ 230 50 1300 5 29 0.19 -30 to +401~ 230 60 1550 5 26 0.17 -30 to +400.976 42 15M4Q045-CA01 -01BCD1~ 230 50 1300 7 31 0.20 -30 to +401~ 230 60 1550 8 30 0.20 -30 to +401.182 42 15M4Q045-CA03 -51CEF1~ 230 50 1300 10 36 0.25 -30 to +401~ 230 60 1550 9 34 0.22 -30 to +401.282 42 15M4Q045-CF01 -01DGH1~ 230 50 1300 16 60 0.42 -30 to +401~ 230 60 1550 16 58 0.36 -30 to +401.387 42 15M4Q045-DA01 -01 (1)EIJ1~ 230 50 1300 18 70 0.48 -30 to +401~ 230 60 1550 18 62 0.42 -30 to +401.693 54 15M4Q045-DA05 -01 (1)FKL1~ 230 50 1300 23 86 0.62 -30 to +401~ 230 60 1550 25 80 0.55 -30 to +401.693 54 15M4Q045-EA01 -01 (1)GMN1~ 230 50 1300 25 90 0.62 -30 to +401~ 230 60 1550 26 80 0.55 -30 to +402.0103 59 16M4Q045-EF01 -01 (1)HOP1~ 230 50 1300 34 110 0.75 -30 to +401~ 230 60 1550 34 100 0.65 -30 to +402.2125 79 33subject to alterations(1) Foot mounting possible on A or B side8367BF ±258Ø415171,4KØ3,6Ø25,4ØD❮ Direction of rotationH450B side1,5M4E ±2A side26Foot measureG±2C❮ "V" "A" ❯302Axial impellerp. 377Guard grillep. 378Basket guard grillep. 378Wall ringp. 379Mounting bracketp. 380

TechnologyAccessoriesAC axial fansEC-SYSTEMSGeneralinformationValid for all designs:– Material: Housing made of die-cast aluminiumStator pack: Coated in black– Direction of air flow: "V" or "A" (depending on axial impeller used)– Direction of rotation: Counter-clockwise, seen on shaft end– Insulation class: "B"– Mounting position: Any, preferrably horizontal– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearing: Self-adjusting calotte sleeve bearing (mean service life of30,000 hours in horizontal installation position)– Motor protection: Impedance protection (combination A-C) or thermaloverload protector internally switched (combination D-H)– Protection class: I– Mounting: Guard grille and wall ring are mounted onto the protrudingthread ends of the A side. The Q-motor can also be screwed on via themounting flanges (integrated in the bearing shields).– Axial impeller mounting: Mounted to the motor shaft using a plasticadapter with pulling peg and an M4 screw (combination A-D) or M5(combination E-H) screw.– Power specifications: At 60 Hz, the blade angle of the axial impellersmust be reduced by 6° each.AC axialS seriesAC axialK seriesAxial impellersBlade angle 22° ± 1°30´ Blade angle 28° ± 1°30´ Blade angle 34° ± 1°30´AC axialA seriesØ D H154 90172 103200 123F G C m 3 /h (2)61 56 27.5 6058 57 31.0 12058 58 32.0 190F G C m 3 /h (2)56 59 32.0 10055 59 36.0 18055 60 37.5 300F G C m 3 /h (2)54 62 37.0 14053 63 42.0 230— — — —EC axial fans200 12365 58 32.0 19062 60 37.5 30059 64 45.0 400230 123230 123254 13564 62 35.0 50064 62 35.0 50064 62 37.0 580— — — —60 65 43.0 630— — — —— — — —52 68 50.0 820— — — —EC axialS series254 13570 62 37.0 58065 66 45.0 840— — — —254 135300 160300 16076 74 37.0 58075 79 43.0 100075 79 43.0 1000Q-motorESM72 78 45.0 840— — — —67 81 53.5 140067 80 52.0 1070— — — —— — — —300 16086 84 43.0 100077 86 53.5 1400— — — —300 160108 104 43.0 1000104 106 53.5 140095 112 61.0 1700(2) established at counterpressure of 20 Pa303Contacts

Square shaded-pole motorsMulti-function design– Foot mounting: Track dimension 26 mm (height 51 mm) or 18 mm (height 48 mm)possible– Bearing shields: A and B-sides, tapped holes 3x M4, diameter of pitch circle 71.4 mm;mounting of guard grille and wall ring on A-side bearing shield;opposite M4 are securely installed in the feet(knurled hex nuts are not included in delivery scope)– Type of protection: IP 42– Electrical connection: Jacketed cable 3 x 0.5 mm 2 with brass lead tips– Product conforming to standard: CE– Approvals: VDE– Curves: Page 308Nominal dataCombination:Motor axial impellerCurveNominal voltageFrequencySpeed/rpmPower outputPower inputCurrent drawPerm. amb. temp.MassDimensionsType p.302VAC Hz rpm W W A °C kg A B E F KM4Q045-BD01 -75M4Q045-CA01 -75M4Q045-CA03 -75M4Q045-CF01 -75M4Q045-DA01 -75M4Q045-DA05 -75M4Q045-EA01 -75M4Q045-EF01 -75ABCDEFGHABCDEFGHIJKLMNOP1~ 230 50 1300 5 29 0.19 -30 to +401~ 230 60 1550 5 26 0.17 -30 to +401~ 230 50 1300 7 31 0.20 -30 to +401~ 230 60 1550 8 30 0.20 -30 to +401~ 230 50 1300 10 36 0.25 -30 to +401~ 230 60 1550 9 34 0.22 -30 to +401~ 230 50 1300 16 60 0.42 -30 to +401~ 230 60 1550 16 58 0.36 -30 to +401~ 230 50 1300 18 70 0.48 -30 to +401~ 230 60 1550 18 62 0.42 -30 to +401~ 230 50 1300 23 86 0.62 -30 to +401~ 230 60 1550 25 80 0.55 -30 to +401~ 230 50 1300 25 90 0.62 -30 to +401~ 230 60 1550 26 80 0.55 -30 to +401~ 230 50 1300 34 110 0.75 -30 to +401~ 230 60 1550 34 100 0.65 -30 to +400.91.11.21.31.61.62.02.243 76 43.5 12 15.049 82 43.5 10 15.049 82 43.5 10 15.054 87 43.5 10 15.059 93 43.5 10 15.059 93 43.5 10 15.069 103 44.0 10 15.592 125 61.0 10 33.0subject to alterations3x120°B sideE ±2KA sideM426M411,5Foot measureM471,4M448 51Ø25,4Ø3,671,413Foot measureM4186783M4150085BFAM4 (4x)M43x120°M4304Axial impellerp. 377Guard grillep. 378Basket guard grillep. 378Wall ringp. 379Mounting bracketp. 380

M4Square shaded-pole motorsFrigo design (specially for spare parts requirements)– Foot mounting: Track dimension 18 mm (height 48 mm)– Bearing shields: B-side, tapped holes 3 x M4, diameter of pitch circle 71.4 mm;mounting of guard grille and wall ring on A-side bearing shield;M4 knurled hex nuts (2x) are enclosed in loose form– Type of protection: IP 42– Electrical connection: Jacketed cable 3 x 0.5 mm 2 with brass lead tips– Product conforming to standard: CE– Approvals: VDE– Curves: Page 308GeneralinformationTechnologyAC axial fansAC axialK seriesAC axialS seriesNominal dataCombination:Motor axial impellerCurveNominal voltageFrequencySpeed/rpmPower outputPower inputCurrent drawPerm. amb. temp.MassDimensionsAC axialA seriesType p.302M4Q045-BD01 -A4 AM4Q045-CA01 -N4 BM4Q045-CA03 -A4 CM4Q045-CF01 -A4 DM4Q045-DA01 -A4 EM4Q045-DA05 -A4 FM4Q045-EA01 -A4 GM4Q045-EF01 -A4 Hsubject to alterationsABCDEFGHIJKLMNOPVAC Hz rpm W W A °C kg A B F K1~ 230 50 1300 5 29 0.19 -30 to +401~ 230 60 1550 5 26 0.17 -30 to +401~ 230 50 1300 7 31 0.20 -30 to +401~ 230 60 1550 8 30 0.20 -30 to +401~ 230 50 1300 10 36 0.25 -30 to +401~ 230 60 1550 9 34 0.22 -30 to +401~ 230 50 1300 16 60 0.42 -30 to +401~ 230 60 1550 16 58 0.36 -30 to +401~ 230 50 1300 18 70 0.48 -30 to +401~ 230 60 1550 18 62 0.42 -30 to +401~ 230 50 1300 23 86 0.62 -30 to +401~ 230 60 1550 25 80 0.55 -30 to +401~ 230 50 1300 25 90 0.62 -30 to +401~ 230 60 1550 26 80 0.55 -30 to +401~ 230 50 1300 34 110 0.75 -30 to +401~ 230 60 1550 34 100 0.65 -30 to +400.91.11.21.31.61.62.02.248.5 76 12 1548.5 82 10 1548.5 82 10 1548.5 87 10 1548.5 93 10 1548.5 93 10 1549.0 103 10 1666.0 125 10 33EC axial fansEC axialS seriesQ-motorB side48KØ3,6Ø25,4A side3x120°M471,4M4150085ESMEC-SYSTEMS13BFAM4(4x)Foot measure186783M4AccessoriesAxial impellerp. 377Guard grillep. 378Basket guard grillep. 378Wall ringp. 379Mounting bracketp. 380305Contacts

Square shaded-pole motorsPlug terminal design– Foot mounting: Track dimension 26 mm (height 51 mm)– Type of protection: IP 42– Electrical connection: Rast 5.6 mm terminal connector, 2.8 x 0.5 mm blade terminal;connection lines available in 420 mm to 4970 mm lengths– Product conforming to standard: CE– Approvals: VDE (put into operation with ebm-papst connection line only!)– Curves: Page 308Nominal dataCombination:Motor axial impellerCurveNominal voltageFrequencySpeed/rpmPower outputPower inputCurrent drawPerm. amb. temp.MassDimensionsType p.302VAC Hz rpm W W A °C kg B E F KM4Q045-BD01 -08M4Q045-CA01 -08M4Q045-CA03 -08M4Q045-CF01 -08M4Q045-DA01 -52 (1)M4Q045-DA05 -52 (1)M4Q045-EA01 -52 (1)M4Q045-EF01 -52 (1)ABCDEFGHABCDEFGHIJKLMNOP1~ 230 50 1300 5 29 0.19 -30 to +401~ 230 60 1550 5 26 0.17 -30 to +401~ 230 50 1300 7 31 0.20 -30 to +401~ 230 60 1550 8 30 0.20 -30 to +401~ 230 50 1300 10 36 0.25 -30 to +401~ 230 60 1550 9 34 0.22 -30 to +401~ 230 50 1300 16 60 0.42 -30 to +401~ 230 60 1550 16 58 0.36 -30 to +401~ 230 50 1300 18 70 0.48 -30 to +401~ 230 60 1550 18 62 0.42 -30 to +401~ 230 50 1300 23 86 0.62 -30 to +401~ 230 60 1550 25 80 0.55 -30 to +401~ 230 50 1300 25 90 0.62 -30 to +401~ 230 60 1550 26 80 0.55 -30 to +401~ 230 50 1300 34 110 0.75 -30 to +401~ 230 60 1550 34 100 0.65 -30 to +400.91.11.21.31.61.62.02.276 43.5 12 1582 43.5 10 1582 43.5 10 1587 43.5 10 1593 43.5 10 1593 43.5 10 15103 44.0 10 16125 61.0 10 33subject to alterations(1) Foot mounting possible on A or B side14,59Blade terminal2.8 x 0.5 mmRast 5.6 mmB sideKØ3,6Ø25,4A side512018According to VDE, motormust be put into operationwith ebm-papst connectionline only!Foot measure266783M411,5PE59BFEM4(4x)306Connection leadp. 376Axial impellerp. 377Guard grillep. 378Basket guard grillep. 378Wall ringp. 379Mounting bracketp. 380

Square shaded-pole motorsUL and CSA design– Description: Designs with UL/CSA approvals; connection lines, temperature monitor anddynamo wire are UL/CSA-approved components– Foot mounting: Track dimension 26 mm (height 51 mm)– Type of protection: IP 42– Electrical connection: Jacketed cable 3 x AWG20 with brass lead tips– Product conforming to standard: UL547, UL1004, CSA C22.2 No. 100,CSA C22.2 No. 77, CE– Approvals: UL, CSA– Curves: Page 308– Drawing: See standard design on page 302GeneralinformationAC axial fansTechnologyAC axialK seriesAC axialS seriesNominal dataCombination:Motor axial impellerCurveNominal voltageFrequencySpeed/rpmPower outputPower inputCurrent drawPerm. amb. temp.MassDimensionsAC axialA seriesType p.302M4Q045-BD03 -04 (2)M4Q045-BD01 -04 (2)M4Q045-CA17 -04 (2)M4Q045-CA01 -04 (2)M4Q045-CA27 -04 (2)M4Q045-CA25 -04 (2)M4Q045-CF07 -04 (2)M4Q045-CF01 -04 (2)M4Q045-DA11 -04 (1)(3)M4Q045-DA01 -04 (1)(3)M4Q045-DA13 -04 (1)(3)M4Q045-DA05 -04 (1)(3)M4Q045-EA03 -04 (1)(3)M4Q045-EA01 -04 (1)(3)M4Q045-EF03 -04 (1)(3)M4Q045-EF01 -04 (1)(3)subject to alterationsAABBCCDDEEFFGGHHABABCDCDEFEFGHGHIJIJKLKLMNMNOPOPVAC Hz rpm W W A °C kg B E K1~ 115 50 1300 5 29 0.38 -30 to +401~ 115 60 1550 5 26 0.35 -30 to +401~ 230 50 1300 5 29 0.19 -30 to +401~ 230 60 1550 5 26 0.17 -30 to +401~ 115 50 1300 7 31 0.40 -30 to +401~ 115 60 1550 8 30 0.40 -30 to +401~ 230 50 1300 7 31 0.20 -30 to +401~ 230 60 1550 8 30 0.20 -30 to +401~ 115 50 1300 10 36 0.50 -30 to +401~ 115 60 1550 9 34 0.45 -30 to +401~ 230 50 1300 10 36 0.25 -30 to +401~ 230 60 1550 9 34 0.22 -30 to +401~ 115 50 1300 16 60 0.80 -30 to +401~ 115 60 1550 16 58 0.74 -30 to +401~ 230 50 1300 16 60 0.42 -30 to +401~ 230 60 1550 16 58 0.36 -30 to +401~ 115 50 1300 18 70 0.98 -30 to +401~ 115 60 1550 18 62 0.87 -30 to +401~ 230 50 1300 18 70 0.48 -30 to +401~ 230 60 1550 18 62 0.42 -30 to +401~ 115 50 1300 23 86 1.25 -30 to +401~ 115 60 1550 25 80 1.10 -30 to +401~ 230 50 1300 23 86 0.62 -30 to +401~ 230 60 1550 25 80 0.55 -30 to +401~ 115 50 1300 25 90 1.25 -30 to +401~ 115 60 1550 26 80 1.10 -30 to +401~ 230 50 1300 25 90 0.62 -30 to +401~ 230 60 1550 26 80 0.55 -30 to +401~ 115 50 1300 34 110 1.50 -30 to +401~ 115 60 1550 34 100 1.35 -30 to +401~ 230 50 1300 34 110 0.75 -30 to +401~ 230 60 1550 34 100 0.65 -30 to +40(1) A and B-side foot mounting possible (2) File No. E 171165 (3) File No. E 762260.90.91.11.11.21.21.31.31.61.61.61.62.02.02.22.276 42 1576 42 1582 42 1582 42 1582 42 1582 42 1587 42 1587 42 1593 54 1593 54 1593 54 1593 54 15103 59 16103 59 16125 79 33125 79 33EC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesAxial impellerp. 377Guard grillep. 378Basket guard grillep. 378Wall ringp. 379Mounting bracketp. 380307Contacts

Square shaded-pole motorsAir performance curves (measured in wall ring)M4Q045-BD01-**, Ø 154, 50 HzM4Q045-BD01-**, Ø 154, 60 Hz[Pa]A[Pa]B90908080707060605050404030302020101050 100 150 200 250[m 3 /h]50 100 150 200 250[m 3 /h]22° 28° 34°22° 28° 34°M4Q045-BD01-**, Ø 172, 50 HzM4Q045-BD01-**, Ø 172, 60 Hz[Pa]A[Pa]B50706040503040203020101050 100 150 200 250 300[m 3 /h]50 100 150 200 250 300 350[m 3 /h]22° 28° 34°22° 28° 34°308

GeneralinformationM4Q045-BD01-**, Ø 200, 50 HzM4Q045-BD01-**, Ø 200, 60 HzAC axial fans[Pa]A[Pa]B5050AC axialS series40304030AC axialK series20102010AC axialA series50 100 150 200 250 300 35022° 28°[m 3 /h]50 100 150 200 250 300 350 40022° 28°[m 3 /h]EC axial fansM4Q045-CA01-**, Ø 200, 50 HzM4Q045-CA01-**, Ø 200, 60 HzEC axialS series[Pa]C[Pa]D70706060Q-motor50504040ESM303020102010EC-SYSTEMS100 200 300 40022° 28° 34°AccessoriesTechnology[m 3 /h]100 200 300 40022° 28° 34°[m 3 /h]309Contacts

Square shaded-pole motorsAir performance curves (measured in wall ring)M4Q045-CA01-**, Ø 230, 50 HzM4Q045-CA01-**, Ø 230, 60 Hz[Pa]C[Pa]D40605030402030201010100 200 300 400[m 3 /h]100 200 300 400 500[m 3 /h]22°22°M4Q045-CA03-**, Ø 230, 50 HzM4Q045-CA03-**, Ø 230, 60 Hz[Pa]80E[Pa]60F705060405040303020201010100 200 300 400 500 600 700[m 3 /h]100 200 300 400 500 600 700[m 3 /h]22° 28° 34°22° 28° 34°310

AC axial fansTechnology[Pa]AC axialS seriesAC axialK seriesAC axialA seriesEC axial fansGeneralinformationM4Q045-CA03-**, Ø 254, 50 HzM4Q045-CA03-**, Ø 254, 60 HzE[Pa]F605040353025203015201010522°100 200 300 400 500 600[m 3 /h]22°100 200 300 400 500 600 700[m 3 /h]M4Q045-CF01-**, Ø 254, 50 HzM4Q045-CF01-**, Ø 254, 60 HzEC axialS series[Pa]G[Pa]H1008080Q-motor606040ESM402020EC-SYSTEMS22° 28°200 400 600 800[m 3 /h]Accessories22° 28°200 400 600 800[m 3 /h]311Contacts

Square shaded-pole motorsAir performance curves (measured in wall ring)M4Q045-DA01-**, Ø 254, 50 HzM4Q045-DA01-**, Ø 254, 60 Hz[Pa]I[Pa]J1001008080606040402020200 400 600 800[m 3 /h]200 400 600 800 1000[m 3 /h]22° 28° 34°22° 28° 34°I M4Q045-DA01-** / K -DA05-**, Ø 300, 50 HzJ M4Q045-DA01-** / L -DA05-**, Ø 300, 60 Hz[Pa][Pa]1004080L60K30I4020J2010200 400 600 800 10001200[m 3 /h]200 400 600 800 1000 1200[m 3 /h]22°22°312

GeneralinformationM4Q045-EA01-**, Ø 300, 50 HzM4Q045-EA01-**, Ø 300, 60 HzAC axial fans[Pa]M[Pa]N10050AC axialS series80406030AC axialK series40202010AC axialA series22°200 400 600 800 1000 1200[m 3 /h]22°200 400 600 800 1000 1200 1400[m 3 /h]EC axial fansM4Q045-EF01-**, Ø 300, 50 HzM4Q045-EF01-**, Ø 300, 60 HzEC axialS series[Pa]O[Pa]P80100Q-motor80606040ESM402020EC-SYSTEMS400 8001200 160022° 28° 34°AccessoriesTechnology[m 3 /h]400 800 1200 160022° 28° 34°[m 3 /h]313Contacts

314

Energy-saving motors (ESM)TechnologyAccessoriesEC-SYSTEMSESMQ-motorGeneralinformationAC axialS seriesAC axialK seriesEC axialS seriesEC axial fansAC axialA seriesAC axial fansEnergy-saving motors (ESM) 316Air performance curves 320Energy-saving axial fans 326315Contacts

Energy-saving motors (ESM)– Material: Housing made of die-cast aluminiumRotor: Coated in black– Direction of air flow: "V" or "A" (depending on axial impeller used)– Direction of rotation: Counter-clockwise, seen on shaft end– Type of protection: IP 44– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyUpper speed (1)Lower speed (1)Power inputPower outputPerm. amb. temp.MassTypeVAC Hz rpm rpm W W °C kgM1G055-BD95 -12M1G055-BD91 -12AA1~ 1151~ 23050/60 2200 1500 22.0 15.0 -30 to +50 0.9M1G055-BD95 -16M1G055-BD91 -16BB1~ 1151~ 23050/60 1750 1300 22.0 12.5 -30 to +50 0.9M1G055-BD95 -21C1~ 11550/60 1550 1100 21.0 10.4 -30 to +50 0.9M1G055-BD91 -21C1~ 230subject to alterations(1) preprogrammed speedsIncluding line cord withplug (450 mm long)67M44x90˚Ø9387,2Ø72F±2Ø3,6Ø25,4ØD❮ Direction of rotation67B sideFastening thread M413,744,7A sideC❮ "V" "A" ❯316Connection leadp. 374Programmingdevice p. 375Axial impellerp. 377(Basket) guard grillep. 378Wall ringp. 379Mounting anglep. 381

Generalinformation– Motor protection: Via electronics– Electrical connection: Line cord with plug– Protection class: II– Product conforming to standard: CE– Approvals: VDE, UL– Curves: Page 320– Speed settings: The pre-programmed upper speed is reachedwith the speed relay open; lower speed is reached when the speedrelay is closed.Speeds from 10% to 100% of the maximum speed can be presetusing the programming unit (see page 375). However, we recommendnot allowing it to fall below 1000 rpm ( A B C ).– Mounting: Guard grille and wall ring are mounted onto the protrudingthread ends of the A side.– Axial impeller mounting: Mounted to the motor shaft using a plasticadapter with pulling peg and an M4 screw.AC axial fansAC axialS seriesAC axialK seriesAxial impellersBlade angle 22° ± 1°30´ Blade angle 28° ± 1°30´ Blade angle 34° ± 1°30´AC axialA seriesØ D rpm m 3 /h (2) W (3) F C m 3 /h (2) W (3) F C m 3 /h (2) W (3) F C1542200 250 4.0310 5.3350 6.774.0 27.571.5 32.01500 170 1.3210 1.7240 2.169.0 37.01722200 380 7.0440 10.0500 13.672.0 31.069.5 36.01500 260 2.2300 3.2340 4.366.5 42.02002200 560 13.4640 (4)19.571.5 32.01500 380 4.3435 6.269.0 37.51541750 200 2.0250 2.7280 3.474.0 27.571.5 32.01300 150 1.3215 1.7240 2.169.0 37.01721750 300 3.5350 5.0400 6.872.0 31.069.5 36.01300 225 2.2300 3.2345 4.366.5 42.02001750 450 6.7510 9.9620 (4)16.871.5 32.069.0 37.51300 335 4.2440 6.2530 10.665.0 45.01541550 180 1.4220 1.9240 2.374.0 27.571.5 32.01100 130 0.5155 0.7170 0.869.0 37.01721550 270 2.5310 3.5350 4.872.0 31.069.5 36.01100 190 0.9220 1.3250 1.766.5 42.02001550 400 4.7450 6.9550 (4)12.771.5 32.069.0 37.51100 285 1.7320 2.5390 4.565.0 45.02301550 710 (4)15.41100 505 6.070.0 35.0(2) Running at free air flow (3) Power requirement of impeller (4) Permitted with corresponding cooling of the motor (shaft power > output power)EC axial fansEC axialS seriesQ-motorESMEC-SYSTEMS– Electr.connection:Power system: 115 or 230 VAC,50/60 HzSpeed selection115 or 230 VACL or NblackbluebrownL1N125Energysavingmotor(ESM)AccessoriesTechnology317Contacts

Energy-saving motors (ESM)– Material: Housing made of die-cast aluminiumRotor: Coated in black– Direction of air flow: "V" or "A" (depending on axial impeller used)– Direction of rotation: Counter-clockwise, seen on shaft end– Type of protection: IP 44– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearingsNominal dataCurveNominal voltageFrequencyUpper speed (1)Lower speed (1)Power inputPower outputPerm. amb. temp.MassTypeVAC Hz rpm rpm W W °C kgM1G055-BD91 -45M1G055-BD87 -25DD1~ 1151~ 23050/60 1400 1000 9.0 5.9 -30 to +50 0.9M1G055-BD95 -26E1~ 11550/60 1400 1000 27.0 12.0 -30 to +50 0.9M1G055-BD91 -26E1~ 230M1G055-BD91 -17F1~ 11550/60 1200 800 12.0 7.5 -30 to +50 0.9M1G055-BD87 -17F1~ 230M1G055-BD95 -30G1~ 11550/60 1200 800 15.4 6.3 -30 to +50 0.9M1G055-BD91 -30G1~ 230subject to alterations(1) preprogrammed speedsIncluding line cord with plug(450 mm long)67M44x90˚Ø9387,2Ø72F±2Ø3,6Ø25,4ØD❮ Direction of rotation67B sideFastening thread M413,744,7A sideC❮ "V" "A" ❯318Connection leadp. 374Programmingdevice p. 375Axial impellerp. 377(Basket) guard grillep. 378Wall ringp. 379Mounting anglep. 381

Generalinformation– Motor protection: Via electronics– Electrical connection: Line cord with plug– Protection class: II– Product conforming to standard: CE– Approvals: VDE, UL– Curves: Page 320– Speed settings: The pre-programmed upper speed is reachedwith the speed relay open; lower speed is reached when the speedrelay is closed.Speeds from 10% to 100% of the maximum speed can be presetusing the programming unit (see page 375). However, we recommendnot allowing it to fall below 600 rpm ( D F ) or 1000 rpm ( E G ).– Mounting: Guard grille and wall ring are mounted onto the protrudingthread ends of the A side.– Axial impeller mounting: Mounted to the motor shaft using a plasticadapter with pulling peg and an M4 screw.AC axial fansAC axialS seriesAC axialK seriesAxial impellersBlade angle 22° ± 1°30´ Blade angle 28° ± 1°30´ Blade angle 34° ± 1°30´AC axialA seriesØ D rpm m 3 /h (2) W (3) F C m 3 /h (2) W (3) F C m 3 /h (2) W (3) F C1541400 160 1.0200 1.3220 1.774.0 27.571.5 32.01000 115 0.4145 0.5160 0.669.0 37.01721400 240 1.8280 2.5320 3.572.0 31.069.5 36.01000 170 0.6200 1.0230 1.366.5 42.02001400 360 3.4410 5.071.5 32.01000 260 1.3295 1.869.0 37.52001400500 8.61000360 3.165.0 45.02301400 640 11.0700 (4)12.5860 (4)14.770.0 35.066.0 43.01000 460 4.0500 4.6615 5.362.5 50.01541200 140 0.6170 0.8190 1.174.0 27.571.5 32.0800 95 0.2110 0.2130 0.369.0 37.01721200 210 1.1240 1.6270 2.272.0 31.069.5 36.0800 140 0.3160 0.5180 0.766.5 42.02001200 310 2.1350 3.2420 5.471.5 32.069.0 37.5800 210 0.6235 1.0290 1.665.0 45.02301200 550 (4) 6.9600 (4) 7.9740 (4) 9.370.0 35.066.0 43.0800 365 2.0400 2.3495 2.762.5 50.02541200 610 (4)10.3800 405 3.069.0 37.0(2) Running at free air flow (3) Power requirement of impeller (4) Permitted with corresponding cooling of the motor (shaft power > output power)EC axial fansEC axialS seriesQ-motorESMEC-SYSTEMS– Electr.connection:Power system: 115 or 230 VAC,50/60 HzSpeed selection115 or 230 VACL or NblackbluebrownL1N125Energysavingmotor(ESM)AccessoriesTechnology319Contacts

Energy-saving motors (ESM)Air performance curvesØ 154, 2200 rpm / 1500 rpmØ 172, 2200 rpm / 1500 rpm[Pa]A[Pa]A35503040253020152010105100 200 300 40050 100 150 200 250 300 350 [m 3 /h][m 3 /h]1500 min -1: 22˚28˚ 34˚ 1500 min-1: 22˚28˚ 34˚2200 min -1: 22˚28˚ 34˚2200 min -1: 22˚28˚ 34˚Ø 200, 2200 rpm / 1500 rpm[Pa]A40302010100 200 300 400 500[m 3 /h]2200 min -1: 22˚28˚ 34˚1500 min-1: 22˚28˚ 34˚320

TechnologyAC axial fansGeneralinformationØ 154, 1750 rpm / 1300 rpm[Pa]242016128AC axialS seriesAC axialK seriesAC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessories4Ø 200, 1750 rpm / 1300 rpm[Pa]50403020101300 min 28˚ 34˚ 22˚Ø 172, 1750 rpm / 1300 rpmB30252015105[m 3 /h]1750 min -1: 22˚28˚ 34˚1300 min-1: 22˚28˚ 34˚B[m 3 /h]1750 min -1: 22˚28˚ 34˚50 100 150 200 250100 200 300 400 500[Pa]50 100 150 200 250 300 350[m 3 /h]1750 min -1: 22˚28˚ 34˚1300 min-1: 22˚28˚ 34˚B321Contacts

Energy-saving motors (ESM)Air performance curvesØ 154, 1550 rpm / 1100 rpmØ 172, 1550 rpm / 1100 rpm[Pa]C[Pa]C16252012158104515040 80 120 160 200[m 3 /h]50 100 200 250 300 350 [m 3 /h]1100 min -1: 22˚28˚ 34˚ 1100 min-1: 22˚28˚ 34˚1550 min -1: 22˚28˚ 34˚1550 min -1: 22˚28˚ 34˚Ø 200, 1550 rpm / 1100 rpmØ 230, 1550 rpm / 1100 rpm[Pa]C[Pa]C403530302520201510105100 200 300 400 500 600 700100 200 300 400 500 [m 3 /h][m 3 /h]1100 min -1: 22˚28˚ 34˚ 1100 min-1: 22˚28˚ 34˚1550 min -1: 22˚28˚ 34˚1550 min -1: 22˚28˚ 34˚322

TechnologyGeneralinformationØ 154, 1400 rpm / 1000 rpmØ 172, 1400 rpm / 1000 rpmAC axial fans[Pa]D[Pa]24D141220AC axialS series1016812AC axialK series648AC axialA series2450 100 150 200 250 30040 80 120 160 200[m 3 /h][m 3 /h]1000 min -1: 22˚28˚ 34˚ 1000 min-1: 22˚28˚ 34˚1400 min -1: 22˚28˚ 34˚1400 min -1: 22˚28˚ 34˚EC axial fansØ 200, 1400 rpm / 1000 rpmØ 230, 1400 rpm / 1000 rpmEC axialS series[Pa]E[Pa]Q-motorESMEC-SYSTEMSAccessoriesE30352530252015EDD2015105DD105600100 200 300400[m 3 /h]200 400 800 [m 3 /h]1000 min -1: 22˚28˚ 34˚ 1000 min-1: 22˚28˚ 34˚1400 min -1: 22˚28˚ 34˚1400 min -1: 22˚28˚ 34˚323Contacts

Energy-saving motors (ESM)Air performance curvesØ 154, 1200 rpm / 800 rpmØ 172, 1200 rpm / 800 rpm[Pa]F[Pa]F16101481210684642250 100 150 200 25040 80 120 160[m 3 /h][m 3 /h]800 min -1: 22˚28˚ 34˚ 800 min -1: 22˚28˚ 34˚1200 min -1: 22˚28˚ 34˚1200 min -1: 22˚28˚ 34˚Ø 200, 1200 rpm / 800 rpmØ 230, 1200 rpm / 800 rpm[Pa]24F[Pa]28G202420161612128844100 200 300 400 500 600 700100 200 300 400 [m 3 /h][m 3 /h]800 min -1: 22˚28˚ 34˚ 800 min -1: 22˚28˚ 34˚1200 min -1: 22˚28˚ 34˚1200 min -1: 22˚28˚ 34˚324

AC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesGeneralinformationØ 254, 1200 rpm / 800 rpm[Pa]G2015105100 200 300 400 500[m 3 /h]1200 min -1: 22˚28˚ 34˚800 min -1: 22˚28˚ 34˚325Contacts

Energy-saving axial fans– Material: Wall ring: Plastic PP20TVBlade: Sheet steel, coated inblackRotor: Coated in black– Number of blades: 5– Direction of air flow: "V", exhaust overstruts– Direction of rotation: Counter-clockwise,seen on rotor– Type of protection: IP 44– Insulation class: "B"– Mounting position: Any– Condensate discharges: None– Mode of operation: Continuous operation (S1)– Bearings: Maintenance-free ball bearings– Motor protection: Via electronics– Electrical connection: Line cord with plug– Protection class: II– Product conforming to standard: CE– Approvals: VDE, UL, CSA– Speed: Using the programming unit(see page 375), 2 speedsbetween n min and n max can be programmed.Nominal dataCurveNominal voltageFrequencyAir flowSpeed/rpmPower inputCurrent drawSound pressure levelMax. operative rangePerm. amb. temp.MassTypeMotorVAC Hz m 3 /h rpm W A dB(A) Pa °C kgW1G200-EA91 -27M1G 055-BDA115 50/60 500 1400 7 0.12 42 — -30 to +50 1.0W1G200-EA95 -47 M1G 055-BD B 115 50/60 800 2200 27 0.42 56 — -30 to +50 1.0W1G200-EA87 -25 M1G 055-BD A 230 50/60 500 1400 7 0.06 42 — -30 to +50 1.0W1G200-EA91 -45 M1G 055-BD B 230 50/60 800 2200 27 0.21 56 — -30 to +50 1.0subject to alterationsCurves (programmable)Curves (programmable)[Pa]504030200,05 0,10 0,15 0,20 [in H 2O]A[Pa]1008060400,1 0,2 0,3 0,4 [in H 2O]B10200 50 100 150 200 250 300 [CFM]100 200 300 400 500n max. = 1400 min -1 n min. = 500 min -1[m 3 /h]0 100 200 300 400[CFM]100 300 500700n max. = 2200 min -1 n min. = 800 min -1[m 3 /h]326

Generalinformation– Electr.connection:blackL11AC axial fansPower system: 115 or 230 VAC,50/60 HzSpeed selectionbluebrownN25Energysavingmotor(ESM)AC axialS series115 or 230 VACL or NQ-motorEC-SYSTEMSESMEC axialS seriesEC axial fansAC axialA seriesAC axialK series76,44,330Ø200Ø236Ø250❮ "V"AccessoriesTechnology4x90°Including line cord with plug(450 mm long)Connection leadp. 374Programmingdevice p. 375Mounting anglep. 381327Contacts

328

EC-SYSTEMSGeneralinformationOptions 330Switch power supplies 334AC axial fansExternal commutation electronics for rail technology 338Accessories: Temperature sensor / control module, pressure control, selection module, interface converter, ... 340HMS controller 358TechnologyAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA series329Contacts

EC-SYSTEMSOptionsEC fanPWM and Lin 0-10 VDCEC fans 24 / 48 VDCwith integrated commutation electronics24 / 48 VDCControl input Lin 0-10 VDCPWMTach outputredblueyellowwhiteLinear input:< 1 VDC -> n=01 VDC -> n min10 VDC -> n maxPWM input:< 10% PWM -> n=010% PWM -> n min100% PWM -> n maxPower supply 230 VAC / 48 VDCEC fan 48 VDCPWM and Lin 0-10 VDCEC fans 48 VDCwith integrated commutation electronics230 VAC, 50 / 60 HzredblueyellowLinear input:< 1 VDC -> n=01 VDC -> n min10 VDC -> n maxSelector switchOptional board (built-in):3 speed stepswhitePWM input:< 10% PWM -> n=010% PWM -> n min100% PWM -> n maxControl inputselector switchLin 0-10 VDC orConstant air flowPC with interfaceconverter (RS485)RS485 / ebmBUSCommutation electronics 650 WEC fanEC fanswith external commutation electronics650 W, 110 VDC (rail technology)110 VDCPC with interfaceconverter (RS485)Actual value 0-10 VDC(e.g. pressure, temperature, air flow,air speed, moisture, CO 2 )Control input Lin 0-10 VDCPotentiometer for set valuesTach outputAlarmController enabling 10-100 VDC10-253 VAC330

GeneralinformationEC fan with integrated electronicsEC fans (motor size 055)with integrated commutation electronics1~ 115 VAC or 230 VAC50/60 Hz mains operationAC axial fansMains operation, 50 / 60 HzEC fans (motor size 074)with integrated commutation electronics1~ 100 -130 VAC or 200 -277 VAC50/60 Hz mains operationAC axialS seriesPC with interfaceconverter (RS485)AC axialK seriesControl input 0-10 VDC / PWMActual value input 0-10 VDCSupply for potentiometer 10 VAC axialA seriesTach outputSlave outputEC fan with integrated electronicsEC fans (motor size 084)with integrated commutation electronics1~ 100 -130 VAC or 200 -277 VAC50/60 Hz mains operationEC axial fansEC axialS seriesMains operation, 50 / 60 HzPC with interfaceconverter (RS485)Q-motorControl input 0-10 VDC / PWMActual value input 0-10 VDCESMSupply for potentiometer 10 VAlarmSlave outputEC-SYSTEMSTechnologyAccessories331Contacts

EC-SYSTEMSOptionsEC fan with integrated electronicsEC fans (motor size 084, ebmBUS)with integrated commutation electronics1~ 200-277 VAC,50/60 Hz mains operationMains operation, 50 / 60 HzPC with interfaceconverter (RS485)On/off and alarmoutput 15 VEC fan with integrated electronicsEC fans (motor size 112/150)with integrated commutation electronics1~ 200-277 VAC or3~ 200-240 / 380-480 VAC50/60 Hz mains operationMains operation, 50 / 60 HzPC with interfaceconverter (RS485)Control input 0-10 VDC / PWMActual value input 0-10 VDCActual value input 4-20 mASupply for external sensor 20 VSupply for potentiometer 10 VAlarmSlave output332

TechnologyAC axial fansAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMGeneralinformationCustomer PC with LISA5.1 control softwareControl softwarepart no.25711-2-0199Interface converterand repeaterInterface converterpart no. 21487-1-0174Electronicsintegrated electronicsEC fanEC-SYSTEMS:Networked EC fans with interfaceconverter and repeaterFeatures of controlsoftware LISA 5.1– Individual controland monitoring ofmax. 7,905 fans– Group-orientedarrangement of the fans– Level 1: Overviewdisplay for 10 floors– Level 2: Overviewdisplay for 255 groups– Level 3: Overviewdisplay for 31 fanswithin a group– Broadcast command fora group or all fansmax. 31addressesmax. 31addressesRepeaterpart no.25708-1-0174Power supply 150 Wintegrated electronicsAC axialA seriesEC axial fans– Speed, temperature orpressure control– Alarm signalEC axialS seriesintegrated electronicsmax. 31addressesRepeaterQ-motor333Contacts

Switch power supply with PFC, basic version48 VDC, 150 W / 300 W– General remarks: Switch power supply with an output power of 150 W / 300 W to supply48 VDC EC motors from the 115 / 230 VAC mains. It is also possible to run several motorsup to an overall power of 150 W / 300 W. Data on the 60 W switching power supply isavailable on request.– Function: Supply of an electrically insulated direct voltage of 48 VDC at the output whenconnected to the 115 / 230 V mains. The power supply is sustainably short-circuit proof,open-circuit proof and protected against overheating. An integrated EMC filter guaranteesRFI suppression of the unit according to EN 61000-3-2.– Material: Housing made of stainless steel– Protection class: I– Type of protection: IP 20 (acc. to EN 60529)Nominal dataNominal voltageFrequencyOutput voltageOutputP 1 max.TypeCNW015-AB06 -01CNW015-AB02 -01CNW030-AC06 -01CNW030-AC02 -01subject to alterationsVAC Hz VDC W A kg1~ 115 50/60 48 150 3.10 0.71~ 230 50/60 48 150 3.10 0.71~ 100-120 50/60 48 300 6.25 1.31~ 200-277 50/60 48 300 6.25 1.3e– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-1– Product conforming to standards: EN 50178, CE– Approvals: UL/CSA (File No. E 181381)5cbaRated output currentMassDimensionsa b c d e f187 176 167 50 110 1187 176 167 50 110 1272 260 251 66 112 2272 260 251 66 112 2fd8010810334

TechnologyAccessoriesAC axial fansAC axialK seriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialS seriesGeneralinformationBlower 1exhaust airBlower 2exhaust airLine sideMotor sideL N PE+48VGND +48Vred blue redGNDblue335Contacts

Switch power supply with PFC, RS485 and ebmBUS48 VDC, 150 W / 300 W– General remarks: Switch power supply with an output power of 150 W / 300 W to supply48 VDC EC motors from the 115 / 230 VAC mains. It is also possible to run several motorsup to an overall power of 150 W / 300 W. Data on the 60 W switching power supply isavailable on request.– Function: Supply of an electrically insulated direct voltage of 48 VDC at the output whenconnected to the 115 / 230 V mains. The power supply is sustainably short-circuit proof,open-circuit proof and protected against overheating. An integrated EMC filter guaranteesRFI suppression of the unit according to EN 61000-3-2.– Material: Housing made of stainless steel– Protection class: I– Type of protection: IP 20 (acc. to EN 60529)Nominal dataNominal voltageFrequencyOutput voltageOutputP 1 max.TypeCNW015-AB06 -05CNW015-AB02 -05CNW030-AC06 -05CNW030-AC02 -05subject to alterationsVAC Hz VDC W A kg1~ 115 50/60 48 150 3.10 0.71~ 230 50/60 48 150 3.10 0.71~ 100-120 50/60 48 300 6.25 1.31~ 200-277 50/60 48 300 6.25 1.3e– EMC: Interference emission acc. to EN 61000-6-3Interference immunity acc. to EN 61000-6-1– Product conforming to standards: EN 50178, CE– Approvals: UL/CSA (File No. E 181381)– Technical features: Control board for RS485, ebmBUS and LISA functions5cbaRated output currentMassDimensionsa b c d e f187 176 167 50 110 1187 176 167 50 110 1272 260 251 66 112 2272 260 251 66 112 2fd8010810336

TechnologyAccessoriesAC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansGeneralinformationTo next switchpower supplyRS232RS485Interface converter~BlowerwhiteyellowLine sideL N PEMotor side+48VGND +48Vred blueGNDTach PWMRS4852 x RJ45:PIN 5 - RS BPIN 6 - RS ARS485337Contacts

External commutation electronicsfor rail technology, 110 VDC, 650 W– General remarks: For EC motors and fans with 3 cores and without integratedcommutation electronics– Function: Commutation unit for three-core EC motors up to a power input of 650 W.Various basic functions are integrated: open loop speed control, closed loop speed control,RS485 interface. In combination with sensors, all control tasks as required in air technologycan be executed.– Protection class: I– Type of protection: IP 20 (acc. to DIN EN 60529)– NB: Connected fans have to be designed for a rated voltage of 127 VDC!Nominal dataNominal voltagePower inputP 1 max.Current drawPerm. amb. temp.MassTypeCEG 485-HB50 -01VDC W A °C kg110 650 5.9 -25 to +40 2.0subject to alterations40169190179,5146,55,51,5 2,2681,5 63 64 63193– EMC / EMI: Acc. to EN 50155 and EN 50121– Legislation: Low voltage directive 73/23/EEC, VDE 0160/EN 50178– Design:• Motor output protected against short circuit phase to phase and conditionallyphase to earth• 0-10 V input (Ri: 100 k)• 0-10 V input (Ri: 100 k) for connection of external actual value input• RS485 interface (ebmBUS)• Floating alarm contact 250 VAC / 5A, during alarm, relay is released (low-active)• Wide voltage input for external controller enabling via RESET function• Tach output• LED for operation and alarm modegreen: unit onred: alarm• Setting of minimum and maximum values via potentiometer• Operational modes (to be set via DIP switch):Open loop speed controlClosed loop speed controlControlling external parameters• Direction of motor rotation reversible– Connectors for external electronics:KL1 2-pole connector; centreline 7.5; Co. Wago part no.: 231-202/026-000KL2A 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000KL2B 6-pole connector; centreline 5; Co. Wago part no.: 231-106/026-000KL3A 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000KL3B 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000KL4 2-pole connector; centreline 5; Co. Wago part no.: 231-102/026-000KL5A 5-pole connector; centreline 5; Co. Wago part no.: 231-105/026-000KL5B 5-pole connector; centreline 5; Co. Wago part no.: 231-105/026-000KL6 3-pole connector; centreline 7.5; Co. Wago part no.: 731-603338

AC axialK seriesAC axialA seriesEC axialS seriesTechnologyQ-motorAccessoriesEC axial fansAC axialS seriesAC axial fansGeneralinformationPE1+18V+10 0-10GNDGND NC COM1 V VH+ H+ TWSensorKL2BKL3BKL5BPE2+ -KL1ESMEC-SYSTEMSRSARSBRSAKL2ARSBAnTachoGND NO COM EN EṈ+KL3A KL4H1 H2 H3PTC H- H- U V WKL5AKL6Connector Connection Assignment / function Connector Connection Assignment / functionPE1Ground connectionKL3A NORelay contact for alarm, make for failurePE2Ground connectionCOM Relay contact for alarmKL1 + 110 VDCKL3B NCRelay contact for alarm, break for failure-110 VDCCOM Relay contact for alarmKL2A RS A Interface connection RS AKL4 EN + Enable input via RESET functionRS B Interface connection RS BEN - Enable input via RESET functionRS A Interface connection RS AKL5A H1 Hall-sensor 1RS B Interface connection RS B H2 Hall-sensor 2An, Tacho Tach output, open collector H3 Hall-sensor 3GND Reference KL2 (for KL2 only) Shielding connectionKL2B +18 V +18 V (non-stabilised, +20%, 20 mA) for supplyingShielding connectionexternal sensorsKL5B H+ Power supply for hall-sensors (+)Sensor 1 Input for external sensor, Ri = 100 k H+ Power supply for hall-sensors (+)GND Reference KL2 (for KL2 only) TW / PTC Thermal switch or PTC connection+10 V +10 V (stabilised +/- 3 %, 25 mA) H- Power supply for hall-sensors (-)0-10 V Input for set value 0 - 10 V, Ri = 100 k H- Power supply for hall-sensors (-)GND Reference KL2 (for KL2 only) KL6 U Motor winding UVMotor winding VWMotor winding W339Contacts

Temperature sensorNominal dataNominal voltageCurrent drawOutput voltageOutput currentOutput impedancePart no.50005-1-0174subject to alterations83,33 +0,21 ±0,12,5Ø7 +0,5Ø3,5Ø4,9– Electr. connection:4537,56,584,713Temperaturemeasuring range5MassVDC mA VDC mA k °C kg15-30 10 0-10 1.0 1.1 -20 to +80 0.02red15-30 VDCyellow0-10 VDCoutput38,56,9+20Output (yellow)+ (red)– (blue)Core-end sleeve450blue685Temperature sensor– Output voltage depending on temperature:U/V100-20 80 Temp. °CTolerance ±3 K340

Temperature control moduleAC axialK seriesAC axialS seriesAC axial fansGeneralinformationNominal dataNominal voltageCurrent drawOutput voltageOutput currentOutput impedanceTemperaturecontrol rangeMassAC axialA seriesPart no.50002-1-017450003-1-0174subject to alterationsVDC mA VDC mA k °C kg18-60 10 2-10 0.1 6.8 +30 to +55 0.0218-60 10 0-10 0.1 6.8 +10 to +45 0.02EC axial fans83,33 +0,21 ±0,12,5Ø7 +0,5Ø3,5Ø4,9– Electr. connection:red18-60 VDCMaximum ripple± 3.5 %redEC axialS series1354537,56,584,7yellow2-10 VDCor 0-10 VDCoutputCounterControllerAlarmControl input0 - 10 VDCTach output,pulses per revolutionyellowwhite47 K680 I sink max.10 mA47 KQ-motor38,56,9+20Speed displayOutput (yellow)+ (red)– (blue)Core-end sleeve450blueGNDblue47 VESM685Temperature control moduleConnection– Control function: Both designs have "cooling" as control functionU/VU/V1010FansEC-SYSTEMS21Accessories0 30 55 Temp. °C50002-1-0174Tolerance ±3 K0 6 1045 Temp. °C50003-1-0174Technology341Contacts

Pressure control with integrated pressure sensor– Functions: Integrated PID controller, day/night/linear set point preset, integrated set pointpotentiometer for day and night, external set point preset via potentiometer– Pressure sensor: 0-500 Pa, bursting strength 200 mbar, for non-aggressivegaseous media– Type of protection: IP 55Nominal dataNominalvoltage rangeFrequencyNominal voltage,alternativePressure controlrangePerm. amb. temp.TypeCCC 000-AC04 -01VAC Hz VDC Pa °C1~ 100-277 50/60 20 @ 50 mA 50-500 -25 to +60subject to alterations167195180±0,41035,589,51621,510,512543pressure controller IP55100-277 VAC 50/60 Hzpressure range 0-500 Pa95±0,2115Ø5,57,5342

TechnologyAC axial fansAccessoriesAC axialS seriesEC-SYSTEMSAC axialA seriesEC axial fansAC axialK seriesGeneralinformationFanSet valuepotentiometerSelector switchMainsAlarmDayLinearNightPELNPELNNCCOMNCCOM20 V INGNDTachOUTGND+10 V0-10 VPWMGNDDayGNDNightEC axialS seriesQ-motorESMGNDST1Control terminalsST2ST7ST8ST3Line terminalsST4ConnectorConnectionAssignment / functionConnectorConnectionAssignment / functionST1ST2ST7ST8PELNPELNNCCOMNCCOMProtective earthMains 50/60 Hz, phaseMains 50/60 Hz, neutralProtective earthMains 50/60 Hz, phaseMains 50/60 Hz, neutralRelay contact for alarm, break for failureRelay contact for alarmRelay contact for alarm, break for failureRelay contact for alarmST3ST420 V INGNDTachOUTGND+10 V0-10 V PWMGNDDayGNDNightGNDDC voltage supply (optional),with reverse polarity protectionGNDTach output from fanControl voltage for fan, 0-10 VGNDSet value potentiometer,supply 10 V (-10 %), 10 mASet value potentiometerSet value potentiometerSelector switch terminalSelector switch terminalSelector switch terminalSelector switch terminal343Contacts

Selection module for 3 speeds– General remarks: Using an external selector switch, one of three preset speedscan be chosen. Presetting is done via one integrated potentiometer each.– Material: Plastics– Type of protection: IP 20TypeCBC 000-AE04 -01subject to alterations509024344

TechnologyAccessoriesEC-SYSTEMSESMAC axial fansAC axialS seriesAC axialK seriesQ-motorEC axialS seriesEC axial fansAC axialA seriesGeneralinformation– Electr.connection:Connectionfanred+10 Vyellowblue0-10 V outputGNDFanSelector switch+10 VConnectionselector switchDayNightParty345Contacts

Interface converter RS232 - RS485– General remarks: This interface converter permits bi-directional connection ofRS232 devices (laptop or PC) with ebmBUS devices (electronic commutation units withRS485 interface)– Safety: Electrical insulation between the RS232 and RS485 side is provided– Material: Plastic housing for standard rail mounting according to DIN EN 50022-35– Status display: Via LEDsgreen: supply voltage OKred: data exchangeNominal dataNominal voltagepower supplySupply voltageCurrent draw atno-load operationPart no.21487-1-0174VAC VAC / VDC mA kg1~ 230 12-24 150 0.4subject to alterationsRS232RS48522– Mode of operation: RS485 2-wire mode with echo and automatic control– Galvanic insulation: Min. 1kV insulation voltage between RS232 and RS485 interfaces andbetween power supply and interfaces– ESD immunity: Up to 15 kV (acc. to IEC 801-2, Stage 4)– Delivery scope: • Interface converter• Supply plug unit (230 VAC / 12 VDC, 500 mA)• Adaptor leads with 2 x 9-pole SUB-D sockets• Adaptor leads with 9-pole SUB-D socket• Screw terminal RS485ML+105Mass (incl. PS)75346

Interface converter RS232 - RS485Generalinformation– General remarks: This interface converter permits bi-directional connection ofRS232 devices (laptop / PDA) with ebmBUS devices (electronic commutation units withRS485 interface). Power supplied by RS232 of the laptop / PDA.– Material: Plastic housing– Status display: Via LEDsPWR: Power supplyTXD: Data transfer (send)RXD: Data transfer (receive)TechnologyAccessoriesEC-SYSTEMSAC axial fansQ-motorAC axialS seriesAC axialK seriesNominal dataPart no.21495-2-0174subject to alterationsMasskg0.1AC axialA seriesEC axial fansTX+ TX- GND RX+ RX-TRX+TRX-19– Mode of operation: RS485 2-wire mode with echo and automatic control– Delivery scope: Interface converter, English-language operating manual– Electrical terminals: Screw terminal, TRX+ = RSA, TRX– = RSBEC axialS seriesRS485RS42274RXDTXDPWR37ESM347Contacts

RS485 repeater– General remarks: The physical RS485 repeater is used for the connection of two segmentson an RS485 basis. It can split a segment with network bus wires that are too long, or withtoo many nodes into two smaller, standardised units. A maximum of 31 nodes can beconnected to the repeater.– Installation: The repeater housing is mounted on the wall or in the cable duct with twoscrews (Ø 4 mm) or with cable ties.– Material: Housing made of galvanised sheet steel– Type of protection: IP 20 according to DIN EN 60529Nominal dataPart no.25708-1-0174VAC Hz VA °C °C kg1~ 200-277 50/60 < 3 0 to +50 -20 to +70 0.3subject to alterations38Bus1 Bus2Bus1 Bus2– Type of transceiver: 2 x ANSI standard RS485 transceiver– Galvanic insulation: Operating insulation 500 V between both channels– Network connection: Screw terminals– Mains connection: Wieland connector GST 18/3 (part of delivery)– Pin configuration of network:319050200Supply voltageFrequencyPower inputPerm. operating temp.Perm. storage temp.MassPin No.Assignment / functionMating connectorGST 18/3Wieland Bambergscrew terminal8765432 1BUS1ABABBUS28 7 6 5 4 3 2 11 - 4 not assigned5 Connection RS485, line B6 Connection RS485, line B7, 8 not assigned(each looped through within BUS1 and BUS2)12345678 12 3 4 5 6 7 8LED30Ø4.3Supply connection348

RS485 terminal box with lead connectionsfor centrifugal fans with EC motor size 084 (ebmBUS, RS485)– General remarks: RS485 terminal box with• 2x RJ45 sockets for ebmBUS• ebmBUS line with Molex Mini-Fit female connector for connection to the motor• 3-pole 4-pin unit connector with AMP Mate-N-Lock female connector toconnect to motor• Mode of operation display (LED2 green) and alarm display (LED 1 red)– Delivery scope:• Terminal Box• Supply line (800 mm)• ebmBUS line (800 mm)– Material: ABS (fire rating V0 according to UL)GeneralinformationAccessoriesAC axialA seriesAC axial fansAC axialS seriesAC axialK seriesPart no.54002-4-1040subject to alterationsEC axial fans– Pin configuration of supply lead:5761.6 7345.4618711199Colour Assignment / functiongreen/yellow PEblack 2 Nblack 1 L– Pin configuration of ebmBUS lead:Colour Assignment / functionyellow RS Awhite RS Bred Operation: +15 V Alarm: 0 Vblue Operation: 0 V Alarm: +15 V– Pin configuration of RJ45 sockets:EC axialS seriesQ-motorESMMounting dimensions58Pin No.56Assignment / functionRS BRS A4EC-SYSTEMS8899Technology61349Contacts

Hand-held control terminal– General remarks: Terminal to control networked fans and to set their parameters;RS485 (ebmBUS)– Type of protection: IP 20 (acc. to DIN EN 60529)– Protection class: III– Display: Plain text LCD, 2x8 characters– Accumulator and charging electronics: 2 x round cell R6 DIN 40863 NiMH 1,500 mAh,operating time approx. 40 hrs, standby time approx. 100 days, charging time max. 4 hrs.– Parts included in delivery: Hand-held control terminal, power supply and accumulatorunit, BUS cable, 2 x round cell R6 NiMH 1,500 mAhNominal dataNominal voltagerange powersupplyFrequencySupply voltagePerm. amb. temp.TypeCBC 000-AB06 -01VAC Hz VDC °C °C kg1~ 100-240 50/60 12 0 to +45 -20 to +65 0.4subject to alterations684495Perm. storage temp.Mass350

TechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformation351Contacts

Speed setting devicewith housing– Material: Housing made of plastic– Type of protection: IP 54– Design: The speed setting device can be operated with the entire range of ebm-papstEC fans. It is supplied with current via the fan's DC output and supplies a 0-10 V signalthat allows infinitely variable open loop speed control. The control also permits fan speedmeasurement using a multimeter equipped with a frequency meter (for which a tach outputis given from the fan).– Cable inputs: 4 x M16 or M20– Mounting holes: Suitable for 4 mm mountsNominal dataSupply voltageMax. current drawResistancePerm. amb. temp.TypeCLC 000-AE04 -01VDC mA k °C kg10 1.1 0-10 Lin 50 0.10subject to alterations58 266565– Speed measurement: Connect a frequency meter to the connection points(labelled + and -) on the PCB board. The fan has an output of 1 pulse perrevolution, so that the measured frequency can be converted into rpm usingthe following equation:rpm = frequency (Hz) x 60– Comment:• A single controller can be used to control multiple fans with the same speed setting.• The connection to the controller is made using four screw connections or one Molexconnection (adaptor lead available).• If the tach cable is required, this device can only be connected to one fan. Note that inrare operating cases, it is possible that permanent connection of the tach cable cancause a slight decrease in the maximum speed.502550Mass+ meter connection– meter connection352

TechnologyAC axial fansAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesGeneralinformation– Electr.connection:red+10 VyellowControlblueGNDwhiteTacho+10 VControlGNDTachoredyellowbluewhiteredyellowbluewhiteFan 2Fan 1353Contacts

Speed setting devicewithout housing– Design: The speed setting device can be operated with the entire range of ebm-papstEC fans. It is supplied with current via the fan's DC output and supplies a 0-10 V signalthat allows infinitely variable open loop speed control. The control also permits fan speedmeasurement using a multimeter equipped with a frequency meter (for which a tach outputis given from the fan).– Mounting hole: 10 mmNominal dataSupply voltageMax. current drawResistancePerm. amb. temp.MassTypeCLC 000-AD04 -01VDC mA k °C kg10 1.1 0-10 Lin 50 0.05subject to alterations50 3628223628124 x Ø3,5– Speed measurement: Connect a frequency meter to the connection points(labelled + and -) on the PCB board. The fan has an output of 1 pulse perrevolution, so that the measured frequency can be converted into rpm usingthe following equation:rpm = frequency (Hz) x 60– Comment:• A single controller can be used to control multiple fans with the same speed setting.• The connection to the controller is made using four screw connections or one Molexconnection (adaptor lead available).• If the tach cable is required, this device can only be connected to one fan. Note that inrare operating cases, it is possible that permanent connection of the tach cable cancause a slight decrease in the maximum speed.+ meter connection– meter connection354

TechnologyAC axial fansAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA seriesGeneralinformation– Electr.connection:red+10 VyellowControlblueGNDwhiteTacho+10 VControlGNDTachoredyellowbluewhiteredyellowbluewhiteFan 2Fan 1355Contacts

LISAControl software for EC-SYSTEMS– Version: LISA 5.1– Features:• Individual control and monitoring of 7,905 fans• Group-oriented arrangement of the fans• Level 1: Overview display for 10 floors• Level 2: Overview display for 255 groups within a floor• Level 3: Overview display for 31 fans within a group• Broadcast command for one group or all fans• Speed, temperature or pressure control• Error messagePart no.25711-2-0199subject to alterations– Suitable for: EC motors and electronics with ebmBUS– System requirements: Windows 2000 / XP356

Fan ControlControl software & accessories for Pocket PCs / PDAs– Version: Fan Control 1.00– Features:• Managing up to 31 fans• Setting pre-set values and indicating actual values• Setting parameters for PID control• Setting fan address• Setting mode of operation (heating/cooling)• Alarm diagnosis• Language selection for user interfaceGeneralinformationTechnologyAC axial fansAccessoriesESMAC axialA seriesAC axialS seriesAC axialK seriesPart no.21500-1-0174subject to alterationsEC axial fansSet and actual valuesMode of operation– Delivery scope: Installation-CD, interface converter (RS232-RS485), BUS cable,installation instruction and detailed manual (PDF). The Pocket PC / PDA and compatibleserial communication cables are not included in the scope of delivery.– Suitable for: EC motors and electronics with ebmBUS– System requirements: Pocket PC / PDA with Windows Mobile 5.0, RS232 interface,and serial communication cable.– Compatible Pocket PCs / PDAs: (as of 2006-09-14)• Hewlett-Packard rx1950• Hewlett-Packard hx2190• Fujitsu-Siemens Pocket Loox C550• Dell Axim x51v (624 MHz)Refer to our website at www.ebmpapst.com/downloads for a continuously updated list ofapproved Pocket PCs / PDAs along with the suitable serial communication cables.EC axialS seriesQ-motorFan addressGraphic settingEC-SYSTEMS357Contacts

HMS controller– General remarks: The HMS controller is governed by a microprocessor and is specificallydesigned for Heat Management Systems (= HMS). This controller allows for an almostlimitless programming variety as regards customer-specific fan speed / temperatureprofiles. Moreover, this controller offers a multitude of the most diverse alarmconfigurations.Our HMS controller has been specially designed and adjusted to the product range ofebm-papst in Mulfingen. Thus, any size of our fans or blowers can be used.The most diverse of applications needing temperature-dependent control are possible.Among these are applications in telecommunication and the IT industry, in refrigerationand air-conditioning as well as in specific industrial plants and systems.Nominal dataSupply voltagePower input (1) ,max.Power input (2) ,max.Current draw (1)max.Perm. amb. temp.MassTypeCCC 000-AA05 -03subject to alterationsVDC W W A °C kg16-57 10 130 0.175 -40 to +70 0.15(1) without fans (2) per fan at nominal voltage1607075.57.2510081– Features:• 4 fan speed / temperature characteristics that can be programmed independentlyof each other• 2 programmable no-frost relays for connecting 115 / 230 VAC heating devices• 5 programmable alarm relays (with time lag):- Temperature alarm (over / under-temperature)- Fan good / bad alarm programming- Temperature sensor alarm- Programmable depending on signal inputs• 4 programmable status outputs (with time lag):- With "open collector" design to connect optical or acoustic displays / alarms- Each fan speed can be set individually• 4 signal inputs for external switches / limit switches• Connection of two independent temperature sensors (NTCs) possible• RS232 interface galvanic insulated• Selective protection of each fan• Programming via Windows software(terminal program version 15 ff.: part no. 25710-2-0199)– Requirements:• Supply voltage of HMS controller: 16-57 VDC• Fans with standard interface- 24 / 48 VDC fan voltage- PWM / linear control input (0-10 V)- Open collector tach output• NTC with R 25 = 33 k (EPCOS type M 891/33k/J)• System requirements: Windows 2000 / XP– Safety: According to EN 50178– EMC / EMI: Interference immunity EN 61000, interference emission EN 50081-1358

AC axial fansAC axialS seriesAC axialK seriesAC axialA seriesTechnologyAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansGeneralinformationL1H1H2NNNF6 10 A * / 250 VF7 10 A * / 250 VAlarm 1 Alarm 3 Alarm 5Alarm 2 Alarm 4K3 K4 K5 K6 K7K1K2Heater 1Heater 2AlarmStatus contact NTC 11 2 3 4 1 2 3 4 116 - 57 VDCFan 1Fan 2Fan 3Fan 4NTC 21F1 3,15 A * / 250 V+PWM Hall-F2 3,15 A * / 250 V+PWM Hall-F3 3,15 A * / 250 V+PWM Hall-+-F4 3,15 A * / 250 VPWM+Hall-F5 3,15 A * / 250 V1* time lag fuse10-57 V / 10 mAêêRD DTR TDGND RTS RS-2321electrically insulated2 4 3 5 7designation 9-pole Sub-D359Contacts

360

AccessoriesGeneralinformationGuard grilles, streamers 362Wall rings 372AC axial fansConnection lines 374Accessories for Q-motors and energy-saving motors (ESM) 374Terminal boxes, capacitors, speed setting devices, motor protection switches, star-delta switches, repair switches 381TechnologyAC axialS seriesAC axialK seriesAccessoriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA series361Contacts

Guard grilleb – Material: Steel, phosphated and coatedin black plasticcØeØfØdghaBasket guard grille for S series axial fansPart no.SizeAC motorEC motora b c d e f g h19110-2-4039 20019111-2-4039 25019112-2-4039 25074251-2-4039 25064555-2-403930064556-2-403930064557-2-403930074301-2-403930064558-2-403931574316-2-403931564559-2-403933074331-2-403933064562-2-403935074351-2-403935064379-2-403940074370-2-403940064536-2-403942064570-2-403942064378-2-403945074372-2-403945025943-2-403945025938-2-4039450068 074 (1) 3.9 6.5 4.3 260.0 25.0 229.0 — 39.0— 074 (2) 5.0 6.2 4.2 300.0 125.0 265.0 — 38.0068 074 (1) 3.9 6.5 4.5 300.0 25.0 271.0 — 38.0068 074 (1) 3.9 6.5 4.5 300.0 25.0 271.0 — 53.0068 074 (1) 4.5 4.3 4.3 360.0 58.0 329.5 — 50.0068 — 4.5 4.3 4.3 360.0 58.0 329.5 26.0 50.0074 — 5.0 6.5 6.5 360.0 90.0 324.0 — 50.0— 074 (2) 5.0 4.2 4.2 360.0 125.0 331.0 10.0 60.0068 — 4.5 6.5 4.5 375.0 58.0 336.5 30.0 80.0— 074 (2) 5.0 6.4 4.2 375.0 125.0 344.0 35.0 85.0068 — 4.5 6.5 4.5 410.0 58.0 354.5 30.0 80.0— 074 (2) 5.0 6.4 4.2 410.0 125.0 370.0 35.0 85.0068 — 5.0 6.5 4.5 422.0 58.0 374.0 30.0 80.0— 074 (2) 5.0 6.4 4.2 422.0 125.0 378.0 35.0 85.0074 — 5.0 9.0 6.5 470.0 90.0 414.0 30.0 80.0— 084 (2) 5.0 9.0 6.5 470.0 164.0 420.0 30.0 80.0074 — 5.0 9.0 6.5 502.0 90.0 452.0 30.0 80.0094 — 5.0 9.0 6.5 502.0 115.0 452.0 30.0 60.0074 — 5.0 9.0 6.5 522.0 90.0 476.0 30.0 80.0— 084 (2) 5.0 9.0 6.5 522.0 164.0 482.0 30.0 80.0094 (3) — 6.0 9.0 6.5 522.0 115.0 472.0 17.5 67.5094 (4) — 7.0 9.0 7.0 515.0 115.0 472.0 16.5 80.0subject to alterations(1) DC-fed (2) Mains-powered (3) Blades made of plastic (4) Blades made of sheet steel362

Guard grilleGeneralinformationhb – Material: Steel, phosphated and coatedin black plasticAC axial fansgØecAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansEC axialS seriesQ-motorESMTechnologyAccessoriesEC-SYSTEMSØfØdaGuard grille for S-series axial fansPart no.Size AC motor EC motor a b c d e f g h18656-2-4039200068 — 3.9 4.6 4.6 245.0 58.0 — — —62622-2-403909414-2-403962623-2-4039200250250—068—074 (1)—074 (1) 3.93.93.94.64.64.64.64.64.6245.0290.0290.058.058.058.0—————————74250-2-403909415-2-403962624-2-403972320-2-403964052-2-403974300-2-403964491-2-403974315-2-403964490-2-403974330-2-403964563-2-403974350-2-403964538-2-403974373-2-403964539-2-403974374-2-403925950-2-4039250300300300300300315315330330350350400 / 420400450450450—068—068074—068—068—068—074—074—094074 (2)—074 (1)——074 (2)—074 (2)—074 (2)—074 (2)—084 (2)—084 (2)—5.03.93.94.55.05.04.55.04.55.05.05.05.05.05.05.07.04.24.64.64.36.54.26.46.46.46.46.56.49.09.09.09.09.04.24.64.64.36.54.24.34.24.34.24.54.26.56.56.56.57.0290.0360.0360.0360.0360.0360.0375.0375.0410.0410.0422.0422.0502.0502.0522.0522.0560.0125.058.058.058.090.0125.058.0125.058.0125.058.0125.090.0164.090.0164.0115.0———329.0——336.0344.0371.0370.0374.0378.0452.0458.0476.0482.0517.0———26.0——33.035.030.035.030.035.030.030.030.030.016.5———26.0——30.035.030.035.030.035.030.038.030.038.038.0subject to alterations(1) DC-powered (2) Mains-powered363Contacts

Guard grillehØeØd6,4 – Material: Steel, phosphated and coatedin black plastic– Wall rings: See p. 373– Comment: Contact us for article numbersfor complete fans.cgaTypical installationGuard grille for S series fans (for nozzle-side mounting to square wall ring with long nozzle)Part no. Size AC motor EC motor a c d e g h35803-2-4039 40035804-2-4039 40074377-2-4039 40035805-2-4039 45035806-2-403974376-2-403926510-2-4039450450450074 (4 poles) —074 (6 poles) —— 084 (2)074 (4 poles) —074 (6 poles) —— 084 (2)094 —5.0 6.5 413.0 90.0 — 16.05.0 6.5 413.0 90.0 30.0 28.05.0 6.5 413.0 164.0 30.0 48.05.0 6.5 466.0 90.0 — 25.05.0 6.5 466.0 90.0 20.0 30.05.0 6.5 467.0 164.0 30.0 48.07.0 7.0 466.0 115.0 16.5 41.0subject to alterations(2) mains-poweredh9 – Material: Steel, phosphated and coatedin black plasticgØeØfØdcaBasket guard grille for S series fans (for mounting to square wall ring with long nozzle)Part no. Size AC motor EC motor a c d e f g h63978-2-4039 420 / 45074375-2-4039 45025950-2-4039 450074 —— 084 (2)094 —5.0 6.5 562.0 90.0 526.0 30.0 30.05.0 6.5 562.0 164.0 526.0 30.0 38.07.0 7.0 560.0 115.0 523.0 16.5 38.0subject to alterations(2) mains-powered364

Guard grilleGeneralinformationØ87 max. 8Ø58 2,8max. gØcØbde– Material: Steel, phosphated and coatedin black plasticAC axial fansAC axialS seriesfaAC axialK seriesBasket guard grille for A series axial fansPart no.Size a b c d e f g19110-2-4039200 3.9 260.0 229.0 6.5 4.3 39.0 6.019111-2-403919112-2-403919113-2-403919114-2-403919115-2-403963406-2-40392502503003503504003.93.93.94.54.54.5300.0300.0360.0422.0422.0470.0271.0271.0327.0375.0380.0428.06.56.56.56.56.59.04.54.54.54.54.54.538.053.035.072.054.067.06.06.06.06.06.08.0AC axialA seriesEC axial fansEC axialS seriesQ-motorESMsubject to alterationshb– Material: Steel, phosphated and coatedin black plasticgefdcaGuard grille for A series axial fansPart no.Size a b c d e f g h18656-2-4039200 3.9 4.6 4.6 245.0 58.0 195.0 — —09414-2-403909415-2-403919699-2-403969667-2-403919117-2-40392503003153504003.93.94.54.54.54.64.66.36.56.34.64.64.34.54.3290.0360.0375.0422.0500.058.058.058.058.058.0247.0300.0327.0387.0467.5————7.0——3.56.514.0subject to alterationsEC-SYSTEMSAccessoriesTechnology365Contacts

Guard grilleb – Material: Steel, phosphated and coatedin black plasticcØeØfØdghaBasket guard grille for K series axial fansPart no. Size a b c d e f g h66024-2-4039 250 4.5 4.3 4.3 300.0 58.0 271.0 26.0 60.077709-2-4039 3003.9 4.5 4.5 360.0 58.0 340.0 26.0 26.019115-2-4039 3504.5 6.5 4.5 422.0 58.0 380.0 — 54.062229-2-4039 3604.5 6.3 4.3 400.0 58.0 357.0 12.0 16.064378-2-40394505.0 9.0 6.5 522.0 90.0 476.0 30.0 80.064539-2-40394505.0 9.0 6.5 522.0 90.0 476.0 30.0 30.0subject to alterations74 – Material: Steel, galvanized and bluechromated (alternative: nickel-plated)Ø182Ø19141,55,8208Guard grille for diagonal fanPart no.Size26388-2-4039 180subject to alterations366

Guard grilleGeneralinformation2,4– Material: Steel, plastic-coated(silver-metallic gloss)AC axial fansAC axialK seriesTechnologyAC axialA seriesEC axialS seriesESMEC-SYSTEMSAccessoriesQ-motorEC axial fans5,5 +0.3Ø240 +2Ø217,6 ±1Ø219,4AC axialS series22,3Guard grille for diagonal fan (inlet side mounting)Part no.Size35139-2-4039208subject to alterations2,4– Material: Steel, plastic-coated(silver-metallic gloss)5,5 +0.3Ø240 +2Ø231-1Ø2258,8Guard grille for diagonal fan (outlet side mounting)Part no.Size35138-2-4039208subject to alterations367Contacts

Guard grille167,5 ±0,5A - B – Material: Steel, galvanized and blue5+1passivated6511,53±0,25152 ±11375,5±0,2A6562,5BGuard grille for diagonal fanPart no.Size51019-2-4039 130subject to alterations– Material: Steel, galvanized and bluechromated (alternative: nickel-plated)1594,3Ø142162261,5Guard grille for axial fan (according to EN 294)Part no.Size50952-2-4039 130 / 142 / 143subject to alterations368

Guard grilleGeneralinformation2– Material: Steel, plastic-coated(silver-metallic gloss)AC axial fansTechnologyAccessoriesAC axialK seriesAC axialA seriesEC axialS seriesØ162Ø139Ø154±1AC axialS series4.3±0.3 4Guard grille for diagonal fanPart no.Size03749-2-403914204013-2-4039 143subject to alterationsEC axial fansQ-motorESMEC-SYSTEMS– Material: Steel, plastic-coated(silver-metallic gloss)aØcØd6,42,4 bGuard grille for diagonal fanPart no.Size78128-2-403920009418-2-4039 250subject to alterationsa b c d240.0 5.4 221.5 208.0295.0 6.4 278.5 270.0369Contacts

Guard grille6x60˚– Material: Steel, phosphated and coatedin black plasticamax. 8bcGuard grilles (e.g. for axial fans)Part no.Sizea b c09513-2-4039 200250.0 227.0 6.009518-2-4039 250 295.0 265.0 7.009532-2-4039 300 380.0 323.0 9.0subject to alterations370

StreamersGeneralinformation– Material: Plastic PA6, 30GV, black(in accordance with UL 94 HB)AC axial fansØb103ØcAC axialS seriesTypical installationa1053103AC axialK seriesStreamers for axial fansPart no.Sizea b c Standard types (1)S4D 315-AP10 -3029550-2-295531510.0 321.0 333.0 S4E 315-AP18 -30S6E 315-AP02 -30S4D 350-BR06 -3029551-2-2955 350 10.0 361.0 373.0 S4D 350-AR06 -30S4E 350-BR06 -30S4D 400-AP12 -0329552-2-2955 400 10.0 401.0 413.0 S4E 400-AP02 -03S6E 400-AP10 -30S4E 450-GA09 -0129553-2-2955 450 12.0 466.0 478.0S4E 350-AR06 -30S6E 350-BR08 -30S6E 350-AR08 -30AC axialA seriesEC axial fansEC axialS seriesS4E 500-CY09 -0129554-2-2955 500 13.0 496.0 508.0 S4E 500-AY09 -01S6E 500-CS05 -01subject to alterations(1) Mounting options for other axial fans respectively basket guard grilles upon request.S6E 500-AS05 -01S6E 500-CT05 -01S6E 500-AT05 -01Q-motorThrust ranges (measured in a typical heat exchanger)Comparison[m/s]1,6ESM1,41,21,00,8With streamerEC-SYSTEMS0,60,40,2Accessoriesvs 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34[m]Without streamerS4E315 (1670 m 3 /h @ 35 Pa)S4E350 (2140 m 3 /h @ 60 Pa)S4E400 (3230 m 3 /h @ 45 Pa)S4E450 (5430 m 3 /h @ 65 Pa)S4E500 (5060 m 3 /h @ 180 Pa)Technology371Contacts

Wall rings6x60˚feØh15˚Øcib – Material: Sheet steel, pre-galvanised anddcoated in black plasticØgØaWall rings with long nozzle for axial fansPart no. Size a b c d e f g h i18912-2-4037 200 280.0 80.0 202.5 5.0 7.0 4.5 245.0 250.0 1.2564009-2-4037 250 (S series) 320.0 86.5 259.5 6.0 7.0 4.5 290.0 295.0 1.2518910-2-4037 250 (A series) 320.0 85.0 256.5 6.0 7.0 4.5 290.0 295.0 1.2518908-2-4037 300397.0 80.0 326.0 11.0 9.0 M4 360.0 380.0 1.5018902-2-4037315397.0 74.0 347.0 11.0 9.0 M6 374.0 380.0 1.5018892-2-4037330440.0 80.0 369.0 11.0 9.0 M6 408.0 404.0 1.5018900-2-4037350460.0 80.0 390.0 12.0 9.0 M6 422.0 442.0 1.5018930-2-4037 400528.0 96.0 419.0 12.0 9.0 M8 500.0 504.0 1.5018929-2-4037 420544.0 96.0 447.0 12.0 9.0 M8 500.0 520.0 1.5064000-2-4037 450 (1)607.0 100.0 465.0 14.0 11.0 M8 560.0 578.0 1.50subject to alterations(1) For mounting the axial fan, use guard grille 63978-2-40391,5– Material: Sheet steel, pre-galvanisedR15Ø bdØac±1±0,545Square wall rings with short nozzle for S series axial fansPart no. Size a b c d35222-2-4037 350 358.0 422.0 795.0 M635223-2-4037 400 400.0 468.0 840.0 M835224-2-4037 420 426.0 500.0 850.0 M835225-2-4037 450 452.0 515.0 850.0 M8subject to alterations372

Wall ringsGeneralinformationdb1,5f– Material: Sheet steel, pre-galvanised andcoated in black plasticTechnologyESMØcAC axial fansAC axialS seriesgehaAC axialK seriesSquare wall rings with long nozzle for axial fansPart no.18918-2-4037Size200a312.0b52.0c203.0d6.0e7.0f4.5g245.0h260.037701-2-4037 250 (S series) 370.0 56.0 260.0 6.0 7.0 4.5 290.0 320.018933-2-4037 250 (A series) 370.0 55.0 257.0 6.0 7.0 4.5 290.0 320.018924-2-4037 300 430.0 80.0 326.0 11.0 9.0 4.5 360.0 380.018903-2-4037 315 430.0 72.5 345.0 11.0 9.0 M6 375.0 380.018901-2-4037 350 485.0 80.0 388.0 12.0 9.0 M6 422.0 435.064005-2-4037 400 540.0 98.0 417.0 12.0 9.0 M8 500.0 490.064006-2-4037 420 (1) 576.0 94.0 439.0 14.0 11.0 M8 560.0 535.064007-2-4037 450 (1) 576.0 100.0 465.0 14.0 11.0 M8 560.0 535.0AC axialA seriesEC axial fansEC axialS seriesQ-motorEC-SYSTEMSAccessoriessubject to alterations(1) For mounting the axial fan, use guard grille 63978-2-4039bd4x90˚– Material: Sheet steel, pre-galvanised andcoated in black plastic– Guard grilles: See p. 364– Comment: Contact us for article numbersfor complete fans.ØeØcf45˚4xM6haTypical installationSquare wall rings with long nozzle for S series axial fans (for nozzle-side mounting)Part no.Size a b c d e f h64020-2-4037400 540.0 98.0 409.0 12.0 9.0 10.0 490.064001-2-4037450576.0 100.0 463.0 14.0 11.0 10.0 535.0subject to alterations373Contacts

Connection leads– Plug terminal: 2.8 x 0.5 mm7,5157,510a23Connection lines for axial compact fan (with plug terminal)Part no. Size a01434-4-6711 142 / 143 61001477-4-6711 142 / 143 100001505-4-6711 142 / 143 2000subject to alterations31,5a40710– Design: Cable conforms to UL standards,sealed plug27,522,59,3Jacketed cable, internal line(UL Style 2464/1061)3 x AWG20 (approx. 0.5 mm 2 )Brass lead tipsConnection lines for energy-saving motors (ESM)Part no.10637-4-1040a45010640-4-1040 60010638-4-1040 150010639-4-1040 32000subject to alterations374

Programming devicefor energy-saving motors (ESM)– Description: Programming unit for setting 2 possible speeds via the USB port of a PC.– System requirements: Windows 2000 / XP– Delivery scope: Programming unitSupply plug unitUSB connection lineMotor connecting cableProgramming software– Type of protection: IP 20– Protection class: IIITechnologyAccessoriesEC-SYSTEMSGeneralinformationAC axial fansAC axialS seriesAC axialA seriesEC axial fansESMQ-motorEC axialS seriesAC axialK seriesNominal dataPerm. amb. temp.Perm. storage temp.TypeCBC 000-AC02 -02subject to alterations°C °C0 to +45 -20 to +655090 24375Contacts

Connection leadsBrass lead tips12,924841a85Cable cross-section (3 x 0.75 mm 2 )Connection lines for Q-motors (plug terminal design)Part no.a79572-4-6711 42079573-4-671179574-4-6711970147079575-4-6711 197079576-4-6711 247079577-4-6711 297079578-4-6711 347079579-4-6711 397079580-4-6711 447062402-4-6711 4970subject to alterations376

Axial impellersGeneralinformationbcb – Material: Sheet aluminiumacTechnologyAC axial fansAC axialK seriesAC axialA seriesAccessoriesEC-SYSTEMS❮ Direction of rotation6,6AC axialS series❮ "V" "A" ❯4 x Ø 4.0 with pitch circle for holes Ø 25.4 mmAxial impeller for Q-motors and energy-saving motors (ESM)Part no. for direction of air flow "V"73801-2-3634 73761-2-3634subject to alterationsPart no. for direction of air flow "A"Blade angle a b c22° ± 1°30’154.0 27.5 14.073802-2-3634 73762-2-3634 28° ± 1°30’ 154.0 32.0 16.0EC axial fansEC axialS seriesQ-motorESM73803-2-3634 73763-2-3634 34° ± 1°30’ 154.0 37.0 18.073804-2-3634 73764-2-3634 22° ± 1°30’ 172.0 31.0 14.573805-2-3634 73765-2-3634 28° ± 1°30’ 172.0 36.0 17.073806-2-3634 73766-2-3634 34° ± 1°30’ 172.0 42.0 21.073807-2-3634 73767-2-3634 22° ± 1°30’ 200.0 32.0 15.573808-2-3634 73768-2-3634 28° ± 1°30’ 200.0 37.5 18.073809-2-3634 73769-2-3634 34° ± 1°30’ 200.0 45.0 22.073810-2-3634 73770-2-3634 22° ± 1°30’ 230.0 35.0 17.573811-2-3634 73771-2-3634 28° ± 1°30’ 230.0 43.0 21.573812-2-3634 73772-2-3634 34° ± 1°30’ 230.0 50.0 24.073813-2-3634 73773-2-3634 22° ± 1°30’ 254.0 37.0 19.073814-2-3634 73774-2-3634 28° ± 1°30’ 254.0 45.0 23.573815-2-3634 73775-2-3634 34° ± 1°30’ 254.0 52.0 26.073816-2-3634 73776-2-3634 22° ± 1°30’ 300.0 43.0 21.573817-2-3634 73777-2-3634 28° ± 1°30’ 300.0 53.5 26.573818-2-3634 73778-2-3634 34° ± 1°30’ 300.0 61.0 30.0377Contacts

Guard grille– Material: Steel, galvanized and bluechromated94,5Øa2,7c5Guard grille for Q-motors and energy-saving motors (ESM)Part no. SizeMax. blade angle at "V" Max. blade angle at "A"a b c50967-2-4039 15434°34°170.0 190.0 11.550968-2-4039 17234° 34°188.0 208.0 11.550969-2-4039 20034° 28°214.0 236.0 11.550970-2-4039 23028° 28°246.0 266.0 17.550971-2-4039 25428° 28°270.0 290.0 17.550972-2-4039 (1) 300— 22°324.0 344.0 17.5subject to alterations(1) When used with M4Q045-EF, blade angles up to 34° are possible2,7– Material: Steel, galvanized and bluechromated94,592ØaØbc5Basket guard grille for Q-motors and energy-saving motors (ESM)Part no. SizeMax. blade angle at "V" Max. blade angle at "A"a b c66309-2-403966310-2-403966311-2-403966312-2-403917220023025434° 34°34° 28°28° 28°28° 28°188.0 208.0 37.5212.0 236.0 37.5246.0 266.0 40.0270.0 290.0 40.066313-2-4039 (1) 300— 22°324.0 344.0 46.8subject to alterations(1) When used with M4Q045-EF, blade angles up to 34° are possible378

Wall ringsGeneralinformation67– Material: Sheet steel, coated in grey plasticAC axial fans67b4,3dØa❮ "V"AC axialS seriesc4,32R3,5481TechnologyESMAC axialK seriesWall rings for Q-motors and energy-saving motors (ESM), direction of air flow "V"Part no. SizeMax. blade angle a b c d52542-2-4037 15434°164.0 190.0 200.0 24.052543-2-4037 17234°182.0 208.0 223.0 24.052544-2-4037 20034°210.0 236.0 246.0 24.052545-2-4037 23028°240.0 266.0 276.0 24.052546-2-4037 25428°264.0 290.0 300.0 24.052547-2-4037 (1) 30022°308.0 344.0 356.0 24.0subject to alterations(1) When used with M4Q045-EF, blade angles up to 34° are possibleAC axialA seriesEC axial fans136R4,5– Material: Sheet steel, coated in grey plasticEC axialS series6767b4,32dØa"A" ❯Q-motorcEC-SYSTEMS4,3AccessoriesWall rings for Q-motors and energy-saving motors (ESM), direction of air flow "A"Part no. SizeMax. blade angle a b c d52550-2-4037 15434°162.0 190.0 200.0 24.052551-2-4037 17234°180.0 208.0 223.0 24.052552-2-4037 20028°208.0 236.0 246.0 24.052553-2-4037 23028°238.0 266.0 276.0 24.052554-2-4037 25428°262.0 290.0 300.0 24.052555-2-4037 (1) 30022°308.0 344.0 356.0 24.0subject to alterations(1) When used with M4Q045-EF, blade angles up to 34° are possible379Contacts

109°Mounting bracketVers. 1 Vers. 2 Vers. 3bb– Material: Sheet steel, galvanized and bluechromated8,22,5cd1825a8,22,5acd186,226184,224162540144,38144,316,2518Mounting bracket for Q-motors (foot measure 18 mm)Part no. Size Vers. a b c d51025-2-4053 1721 56.0 51.0 78.0 100.051028-2-4053 2001 67.0 51.0 78.0 100.051026-2-4053 2301 74.5 51.0 78.0 100.051027-2-4053 2542 85.5 51.0 78.0 100.051014-2-4053 3003 112.0 — 150.0 172.0Suitable Q-motorM4Q045-BD01-**M4Q045-BD01-**, M4Q045-CA01-**M4Q045-CA01-**, M4Q045-CA03-**M4Q045-CA03-**, M4Q045-CF01-**, M4Q045-DA01-**M4Q045-DA01-**, M4Q045-DA05-**, M4Q045-EA01-**, M4Q045-EF01-**subject to alterationsVers. 1 Vers. 2 Vers. 3515151– Material: Sheet steel, galvanized and bluechromated2,5a8,27810026248,22,5a781002688,221402,5a7810026731,850,3144,31,5144,3144,313Mounting bracket for Q-motors (foot measure 26 mm)Part no.SizeVers. a71881-2-4053 1541 39.071882-2-4053 1721 52.071883-2-40532001 72.02301 72.071884-2-4053 2541 84.071885-2-4053 2542 84.071886-2-4053 3002 109.071887-2-4053 3003 109.0Suitable Q-motorM4Q045-BD01-**M4Q045-BD01-**M4Q045-BD01-**, M4Q045-CA01-**M4Q045-CA01-**, M4Q045-CA03-**M4Q045-CA03-**, M4Q045-CF01-**M4Q045-DA01-**M4Q045-DA01-**, M4Q045-DA05-**M4Q045-EA01-**, M4Q045-EF01-**subject to alterations380

Mounting angles, terminal boxesGeneralinformation6722x45˚15,57515,52– Material: Sheet steel, hot-galvanisedAC axial fans4,367AC axialS series25AC axialK seriesMounting angle for energy-saving motors (ESM)Part no. SizeMax. blade angle at "V" Max. blade angle at "A"a b63500-2-4060 154 / 172 34°34°103.0 152.0AC axialA seriesEC axial fans91,5= = – Material: ABS3– Description: Two-piece terminal box forAC motors of size 068 or 074, terminal stripwith 4- or 7-pole.Suitable for installation of capacitor with10 µF max.– Type of protection: IP 54EC axialS seriesQ-motor1827,5TechnologyESMba988,2EC-SYSTEMS10Accessories785x45˚63501-2-4060 20034° 28°123.0 172.063502-2-4060 230 / 254 28° 28°135.0 184.0subject to alterations94Øa29b 5612c58Terminal boxPart no.AC motor a b c64442-1-7612 068 (4 poles) 22.0 5.0 4.364444-1-7612 068 (7 poles) 22.0 5.0 4.364443-1-7612 074 (4 poles) 12x14.5 10.5 5.564445-1-7612 074 (7 poles) 12x14.5 10.5 5.5subject to alterations381Contacts

CapacitorsØ aM810 bc±107 ±1– Material: Housing made of thermoplastic resin– Connection line: Multi-leadPVC cable 0.5 mm 2 with brass lead tips– Approval: VDE according to DIN EN 60252(VDE 0560/8)– Calculated life time:400 V; -25 to +85°C; 30,000 hrs; class A450 V; -25 to +85°C; 10,000 hrs; class BMKP motor capacitors (without fuse)Part no.Capacitya b (max.) c02100-4-7320 1.0 µF 25-28 58.0 235.099282-4-7320 1.5 µF 25-28 58.0 235.099283-4-7320 2.0 µF 25-28 58.0 235.002103-4-7320 2.5 µF 25-28 70.0 235.068462-4-7320 3.0 µF 25-28 70.0 235.099284-4-7320 4.0 µF 28-32 58.0 235.002101-4-7320 5.0 µF 30-36 70.0 235.099285-4-7320 6.0 µF 30-36 70.0 235.066788-4-7320 7.0 µF 30-36 72.0 100.099286-4-7320 8.0 µF 35-40 72.0 235.099287-4-7320 10.0 µF 35-40 72.0 200.066786-4-7320 12.0 µF 40.0 72.0 100.030457-4-7320 14.0 µF 40-45 92.0 150.050090-4-7320 16.0 µF 35-40 95.0 100.090034-4-7320 20.0 µF 40.0 95.0 235.090025-4-7320 25.0 µF 40.0 120.0 235.0subject to alterations382

CapacitorsGeneralinformation7±1+535235AC axial fansAC axialS seriesAC axialK seriesAC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesTechnologyØ aM810 b+10-5cØ a + 3,5– Material: Plastic cap, aluminium cup– Designation: FPU or P2 according toIEC 252 (non-flammable, non-explosive,circuit-breaking)– Approval: VDE according to DIN EN 60252(VDE 0560/8)– Calculated life time:420 V; -25 to +85°C; 30,000 hrs; class A470 V; -25 to +85°C; 10,000 hrs; class B500 V; -25 to +85°C; 3,000 hrs; class CMKP motor capacitors FPU or P2 (with fuse)Part no.Capacity a b (max.) c (max.)02151-4-73201.0 µF 25-30 77.0 92.002155-4-7320 1.5 µF 25.0 77.0 92.002156-4-7320 2.0 µF 25.0 77.0 92.002159-4-7320 2.5 µF 30.0 71.0 92.002160-4-7320 3.0 µF 30.0 71.0 92.002161-4-7320 4.0 µF 25-30 104.0 135.002162-4-7320 5.0 µF 25-30 104.0 113.002163-4-7320 6.0 µF 30.0 101.0 110.002164-4-7320 7.0 µF 30-35 101.0 110.002165-4-7320 8.0 µF 30-35 102.0 111.002166-4-7320 10.0 µF 35.0 96.0 110.002167-4-7320 12.0 µF 35.0 96.0 110.090026-4-7320 14.0 µF 40.0 130.0 139.002168-4-7320 16.0 µF 40.0 96.0 130.002169-4-7320 20.0 µF 40.0 116.0 130.002170-4-7320 25.0 µF 40-45 116.0 130.0subject to alterationsmax. 9 mm– Pull-off protector: The housing expandsby max. 9 mm. The protector responds tooverload by the generated excess pressuresnapping off the internal lead in a predeterminedbreaking point.– Mounting: c is the overall dimension of thecapacitor which has to be taken into accountwhen mounting the part. The capacitordesign, however, depends on the manufacturer.The expansion (9 mm) is either addedto dimension b, or it is already integrated inthe capacitor.383Contacts

Speed setting device, 3-phase (with 5 steps)for wall assembly– Technical features: Input for TOP– Voltage steps: 3~ 400 / 280 / 230 / 180 / 140 VAC– Type of protection: IP 20 (with vertical installation)Nominal dataNominal voltageFrequencyCurrent drawMassTypeVAC Hz A kgTCD 020-AA01 -05 3~ 400 50/60 2.0 9.5TCD 040-AA01 -05 3~ 400 50/60 4.0 13.9TCD 070-AA01 -05 3~ 400 50/60 7.0 19.7subject to alterations266185224 166309189 4xØ5,5189304384

Speed setting device, single-phase (with 5 steps)for wall assembly– Technical features: Input for TOP– Voltage steps: 1~ 230 / 160 / 145 / 130 / 105 VAC– Type of protection: IP 40AccessoriesGeneralinformationAC axial fansESMQ-motorAC axialK seriesAC axialS seriesNominal dataNominal voltageFrequencyAC axialA seriesTypeTCE 021-AA01 -05TCE 040-AA01 -051~1~VAC230230Hz50/6050/60A2.14.0kg3.64.8TCE 075-AA01 -05 1~ 230 50/60 7.5 6.5EC axial fanssubject to alterations144EC axialS series204154167147864xØ7Current drawEC-SYSTEMSMassTechnology200385Contacts

Motor protection switch, 3-phasefor assembly inside a cabinet– Technical features: Input for TOPNominal dataNominal voltageFrequencyCurrent drawMassTypeTPD 250-AB01 -01TPD 250-AB01 -02TPD 250-AB01 -03subject to alterationsVAC Hz A kg3~ 400 50/60 25.0 0.33~ 400 50/60 25.0 0.33~ 400 50/60 25.0 0.3Auxiliary contactorWithout auxiliary contactorWith break contactWith make contact– Electr. connection:68754,566,5386

Motor protection switch, single-phasefor assembly inside a cabinet– Technical features: Input for TOPTechnologyAccessoriesEC-SYSTEMSQ-motorAC axialK seriesGeneralinformationAC axial fansAC axialS seriesNominal dataNominal voltageFrequencyCurrent drawMassAC axialA seriesTypeTPE 100-AB01 -01TPE 100-AB01 -02TPE 100-AB01 -03VAC Hz A kg3~ 230 50/60 10.0 0.33~ 230 50/60 10.0 0.33~ 230 50/60 10.0 0.3Auxiliary contactorWithout auxiliary contactorWith break contactWith make contactEC axial fanssubject to alterations52,5– Electr. connection:1034546EC axialS series7078ESM387Contacts

Motor-protection switch, single phase and three-phasefor wall assembly– Technical features: Input for TOP– Type of protection: IP 55Nominal dataNominal voltageFrequencyCurrent drawMassTypeTPD 250-AA01 -01TPD 250-AA01 -02TPD 250-AA01 -03TPE 100-AA01 -01TPE 100-AA01 -02TPE 100-AA01 -03subject to alterationsVAC Hz A kg3~ 400 50/60 25.0 0.63~ 400 50/60 25.0 0.63~ 400 50/60 25.0 0.61~ 230 50/60 10.0 0.61~ 230 50/60 10.0 0.61~ 230 50/60 10.0 0.6Auxiliary contactorWithout auxiliary contactorWith break contactWith make contactWithout auxiliary contactorWith break contactWith make contact799280– Electr. connection, three-phase:141– Electr. connection, single-phase:3820388

Star-delta switch / repair switchThird-party accessories from Möller Electric GmbHGeneralinformationFor more information: www.moeller.netTechnologyAccessoriesEC axialS seriesAC axialS seriesAC axial fansfor wall installationAC axialK seriesStar-delta switch (available from Möller Electric GmbH)DesignationInstallationT0-4-8410/I1Wall installationT0-4-8410/ECabinet installationsubject to alterationsFor more information: www.moeller.netAC axialA seriesEC axial fansfor wall installationQ-motorRepair switch, lockable (available from Möller Electric GmbH)DesignationInstallationESMT0-2-8900/I1/SVB-SWT0-2-8900/EA/SVB-SWsubject to alterationsWall installationCabinet installationEC-SYSTEMS389Contacts

390

TechnologyGeneralinformationTechnical parameters & scope 392AC axial fansImpellers 396Motors 410Control technology 414TechnologyAccessoriesAC axialS seriesAC axialK seriesEC-SYSTEMSESMQ-motorEC axialS seriesEC axial fansAC axialA series391Contacts

Technical parameters & scopeHigh standards for all ebm-papst productsHere at ebm-papst, we constantly strive to further improve our products in order to be able to offer you the bestpossible product for your application. Careful monitoring of the market ensures that technical innovations arereflected in the improvements of our products.Based on the technical parameters listed below and the ambience you want our product to operate in,we here at ebm-papst can always work out the best solution for your specific application.General performance parametersAny deviations from the technical data and parameters described hereare listed on the product-specific data sheet.Type of protectionThe type of protection is specified in the product-specific data sheets.Insulation classThe insulation class is specified in the product-specific data sheets.Mounting positionThe mounting position is specified in the product-specific data sheets.Condensate discharge holesInformation on the condensate discharge holes is provided in theproduct-specific data sheets.Mode of operationThe mode of operation is specified in the product-specific data sheets.Protection classThe protection class is specified in the product-specific data sheets.Service lifeThe service life of ebm-papst products depends on two major factors:– The service life of the insulation system– The service life of the bearing systemThe service life of the insulation system mainly depends on voltage level,temperature and ambient conditions, such as humidity and condensation.The service life of the bearing system depends mainly on the thermal loadon the bearing.The majority of our products use maintenance-free ball bearings forany mounting position possible. As an option, sleeve bearings can beused, which is indicated on the product-specific data sheet whereverapplicable.The service life L10 of the ball bearings can be taken as approx. 40,000operating hours at an ambient temperature of 40 °C, yet this estimatecan vary according to the actual ambient conditions.We will gladly provide you with a lifetime calculation taking into accountyour specific operating conditions.Motor protection / thermal protectionInformation on motor protection and thermal protection is provided in theproduct-specific data sheets.Depending on motor type and field of application, the following protectivefeatures are realised:– Thermal overload protection (TOP), either in-circuit or external– PTC with electronic diagnostics– Impedance protection– Thermal overload protection (TOP) with electronic diagnostics– Current limitation via electronicsIf an external TOP is connected, the customer has to make sure toconnect a conventional trigger device for switching it off.All fans with 1~ AC voltage are equipped with a TOP that is connectedin the winding circuit.Products without fitted TOP and without protection against improper use,a motor protection complying with the valid standards has to be installed.392

AC axialS seriesAC axial fansGeneralinformationLeft: Endurance test roomMiddle: Shock testRight: Chamber test rigAC axialK seriesMechanical strain / performance parametersAll ebm-papst products are subjected to comprehensive tests complyingwith the normative specifications. In addition to this, the tests also reflectthe vast experience and expertise of ebm-papst.Legal and normative directivesThe products described in this catalogue are designed, developed andproduced in keeping with the standards in place for the relevant productand, if known, the conditions governing the relevant fields of application.AC axialA seriesVibration testVibration tests are carried out in compliance with– Vibration test in operation according to DIN IEC 68, parts 2-4– Vibration test at standstill according to DIN IEC 68, parts 2-4Shock loadShock load tests are carried out in compliance with– Shock load according to DIN IEC 68, parts 2-27Balancing qualityTesting the balancing quality is carried out in compliance with– Residual imbalance according to DIN ISO 1940– Standard balancing quality level G 6.3Should you require a higher balancing quality level for your specificapplication, please let us know and specify this when ordering yourproduct.Chemo-physical strain / performance parametersShould you have questions about chemo-physical strain, please directthem to your ebm-papst contact.Fields of application, industries and applicationsOur products are used in various industries and applications:Ventilation, air-conditioning and refrigeration technology, clean roomtechnology, automotive and rail technology, medical and laboratory technology,electronics, computer and office technology, telecommunications,household appliances, heating, machines and plants, drive engineering.Our products are not designed for use in the aviation and aerospaceindustry!StandardsInformation on standards is provided in the product-specific data sheets.EMCInformation on EMC standards is provided in the product-specific datasheets.Complying with the EMC standards has to be established on the finalappliance, as different mounting situations can result in changed EMCproperties.Leakage currentInformation on the leakage current is provided in the product-specificdata sheets.The measurement takes place according to Fig. D.1 according toIEC 60990, Fig. 4.ApprovalsIn case you require a specific approval for your ebm-papst product(VDE, UL, GOST, CCC, CSA, etc.) please let us know.Most of our products can be supplied with the relevant approval.Information on existing approvals is provided in the product-specificdata sheets.Air performance measurementsAll air performance measurements are carried out on inlet-side chambertest rigs in conformity with the requirements of DIN 24163 and ISO 5801.The fans being tested are installed on the measuring chamber at free airintake and discharge (installation type A according to DIN 24163 Part 1)and are operated at nominal voltage (for AC, also at nominal frequency)without additional attachments such as the guard grille.As required by the standard, the air performance curves correspond toan air density of 1.2 kg/m 3 .EC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesTechnology393Contacts

Room for precision noise measuringMeasurement conditions for air and noise measurementebm-papst products are measured under the following conditions:– Axial and centrifugal fans with direction of air flow "V", without guardgrille and in the wall ring– Backward curved centrifugal fans, free-running and with inlet nozzle– Forward curved single and dual inlet centrifugal fans with housingNoise measurementsAll noise measurements are carried out in low-reflective test rooms withreverberant floor. Thus the ebm-papst acoustic test chambers meet therequirements of precision class 1 according to DIN EN ISO 3745. For noisemeasurement, the fans being tested are placed in a reverberant wall andoperated at nominal voltage (for AC, also at nominal frequency) withoutadditional attachments such as the guard grille.Sound pressure level and sound levelAll noise levels are measured in conformity to DIN 45635 andISO 3744/3745 according to precision class 2 and specified A-weighted.When the sound pressure level (L p ) is measured, the microphone is onthe intake side of the fan being tested, usually at a distance of 1 m onthe fan axis.To measure the sound level (L w ), 10 microphones are distributed overan enveloping surface on the intake side of the fan being tested(see graphic). The sound level measured can be roughly calculatedfrom the sound pressure level by adding 7 dB.Measurement configuration according to DIN 45635 T38:10 measuring pointsd ≥ Dh = 1.5d to 4.5dMeasurement area S = 6d 2 + 7d (h + 1.5d)1,5dD3dh2d394

AC axialK seriesAC axialS seriesAC axial fansGeneralinformationCurvesAdding multiple noise sources with the same levelAdding 2 noise sources with the same volume results in a level increaseof approx. 3 dB. The noise characteristics of multiple identical fans canbe determined in advance based on the noise values specified in the datasheet. This is shown in the diagram opposite.Example: 8 A3G800 axial fans are on a condenser. According to the datasheet, the sound pressure level of a fan is approximately 75 dB(A).The level increase measured from the diagram is 9 dB. Thus the overallsound level of the installation can be expected to be 84 dB(A).Increase in sound pressure / sound power level [dB]05 9 1015125 810 15 20 25AC axialA seriesEC axial fansEC axialS seriesNumber of sources of sound with identical levelAdding two noise sources with different levels[dB]3The acoustic performance of two different fans can be predeterminedbased on the sound levels given in the data sheet. This is shown in thediagram opposite.Example: There is an axial fan A3G800 with a sound pressure level of75 dB(A) at the operating point and an axial fan A3G710 with 71 dB(A) ina ventilation unit. The level difference is 4 dB. The level increase can nowbe read in the diagram as approx. 1.5 dB. This means that the overallsound level of the unit can be expected to be 76.5 dB(A).Inverse square lawsThe sound level is independent of the distance from the noise source.Conversely, the sound pressure level decreases as distance from thenoise source increases. The diagram to the right shows the level decreaseexpressed in terms of an output measurement at a distance of 1 m fromthe noise source under far-field conditions.Example: An axial fan A3G800 has a sound pressure level of 75 db(A) atthe operating point. Now, you want to measure the noise characteristics ata distance of 20 m. In the diagram to the right, you can now read areduction of 26 dB for the 20 m distance.Decrease in sound pressure level[dB] Increase in sound pressure / sound power level01 1,5 20 4 8 12 16 20 24Difference in level with two sources of sound[dB]-40-30 -26 -20-100Q-motorESMEC-SYSTEMSAccessoriesTechnology1 2 5 10 20 50 100Distance[m]395Contacts

ImpellersImpellers made by ebm-papstLike pumps and compressors, fans and blowers belong to the category of aerodynamic and fluid work machines.A fan consists of an impeller, a drive motor and a housing for suspension and for guiding the air flow. The blades spacedalong the circumference of the impeller are designed in such a way as to cause the flowing work medium to changedirection, thus passing on pressure and speed energy.ebm-papst construction designsDepending on the geometrical shape of the impeller, there are differentconstruction designs, with their names taken from the main flowdirection in the impeller.The most important designs are:– Axial fans– Centrifugal fans with backward curved blades– Single or dual inlet centrifugal blowers with forward curved blades– Diagonal (mixed flow) fans (a cross between axial and centrifugal fans)Application-specific selection parametersWhen selecting an application-specific fan or blower, the main parametersto be taken into account are these:– Air flow at given back pressure– Constructional design– Speed/rpm– Impeller diameter– Ambient conditions governing suction and exhaust sideRelevant fields of application of the various construction designsThe different ebm-papst fan and blower designs correspond to thedifferent fields of application:– Small back pressures: Axial fans– High back pressures: Centrifugal fans with backward curved bladesand single or dual inlet centrifugal blowers– Threshold between axial and centrifugal fans: Diagonal fansCharacteristic curves of the various designs[Pa]12001000axial fanscentrifugal fans, backward curvedcentrifugal blowers, single inletcentrifugal blowers, dual inletdiagonal fans800600400200200 500 10002000 5000 10000 20000 50000[m³/h]396

TechnologyAC axialK seriesEC-SYSTEMSAC axialS seriesAC axial fansGeneralinformationAxial fansOperating rangeTo the right of the "saddle" (right part of the air performance curve):– Maximum efficiency– Minimal noiseTo the left of the "saddle" (left part of the air performance curve):– Stall area– Drop in efficiency– Soaring noiseThe optimum operating range of the fan is shaded in green in thecurve given here.Noise / efficiency curve[Pa][%][dB(A)]AC axialA seriesEC axial fansstall areaoptimum operating rangeEC axialS series00[m³/h]Direction of air flowThe direction of air flow is given as follows:Q-motorDirection of air flow "V"Direction of air flow "A"ESM❮ "V" "A" ❯Accessories397Contacts

Effects when mounted in wall ring or in the apertureMounting the fan in a wall ring can significantly increase the airperformance in the operating range.Curve[Pa][%]11Wall ring2Aperture22 100[m³/h]Effects with axial position in the wall ringAxial position in the wall ring influences air performance and efficiency.Curve[Pa][%]1Projecting on 2 Flush on 3 Immersed oninlet side inlet side inlet sidex / D = 7 % x / D = 0 % x / D = -7 %xxx21 31DDD3 200[m³/h]398

AC axialA seriesAccessories EC-SYSTEMS ESM Q-motorTechnologyEC axialS seriesEC axial fansAC axialK seriesAC axialS seriesAC axial fansGeneralinformationEffects with guard grillesMounting a guard grille reduces the air performance of the axial fan.1Without guard grilleCurve[Pa]1[%]2With guard grille22 100[m³/h]The pressure drop in Pa can be roughly calculated according to thefollowing equation:∆p GG = .GG 10 -8 . V 2 V in [m 3 /h]For the guard grilles used at ebm-papst, the correction factor GG can beused depending on the impeller diameter D from the table to the right.Diameter D130143180200250300315350400450500560630710800910990Correction factor100006600255016506503002401509055352011631.50.9 GG399Contacts

Effects of obstructions on the suction or exhaust sideDisturbances or obstructions on the suction or pressure side reducethe air performance of the axial fan.Curve[Pa]Obstructions on the inlet sideXD12345x / D = x / D = 35 %x / D = 18 %x / D = 9 %x / D = 5 %1234500[m³/h]Obstructions on the exhaust sideDX12345x / D = x / D = 35 %x / D = 18 %x / D = 9 %x / D = 5 %[Pa]2543100[m³/h]400

TechnologyAC axialS seriesAC axial fansGeneralinformationCentrifugal fans with backward curved bladesAC axialK seriesOperating rangeMiddle part of air performance curve:– Maximum efficiency– Minimal noiseTo the right and the left of the middle part of the air performance curve:– Reduced efficiency– Increasing noiseThe optimum operating range of the fan is shaded in green in the curvegiven here.Noise / efficiency curve0[Pa][%][dB(A)]AC axialA seriesEC axial fansoptimum operating rangeEC axialS series0[m³/h]Effects of nozzle gap dimensionThe centrifugal air gap between the inlet nozzle and impeller cover plateinfluences the air performance and efficiency of the centrifugal fan.Curve[Pa][%]Q-motor1s / D = 0.4 %ESM2s / D = 1.0 %S3s / D = 1.4 %3 2 1EC-SYSTEMSD003 2 1[m³/h]Accessories401Contacts

Effects of overlapping dimensionThe axial overlap between the inlet nozzle and impeller cover plateinfluences the air performance and efficiency of a centrifugal fan.Curve[Pa]1[%]X123x / D = 0.6 %x / D = 0 %x / D = -0.8 %3312200[m³/h]Effects of installation spaceWhen mounting our product in a rectangular box, air performancemight be reduced.0,960,971,00DCurveB0,990,98d hBH0,5xDDH= Hydraulic diameterFormula: d h = 2 x B x H / (B + H)= Width of box= Height of boxD = Outer diameter of the fanDCorrection factor for air flow0,92 0,93 0,94 0,951,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8Hydraulic diameter d h/D402

AC axialA seriesQ-motorESMEC-SYSTEMSTechnologyAccessoriesEC axialS seriesEC axial fansAC axialK seriesAC axialS seriesAC axial fansGeneralinformationAir flow measurement for inlet nozzleswith pressure-measuring pointThe differential pressure approach compares the static pressure beforethe inlet nozzle with the static pressure inside the inlet nozzle.D0,5xDAir flow can be calculated on the basis of the differential pressure(difference in pressure of the static pressures) in keeping with thefollowing equation:V = k . ∆p W V in [m 3 /h] and ∆p W in [Pa]If constant air flow control is used, then the nozzle pressure has to bekept constant: ∆p W = V 2 :k 2k takes into account the specific nozzle characteristics.One or four pressure measuring points are spaced along thecircumference of the inlet nozzle. Connection on the customer sideis accomplished via a premounted T tube connector. This tube connectoris suited for pneumatic hoses with an internal diameter of 4 mm.403Contacts

Single and dual inlet centrifugal blowerswith forward curved bladesThe forward curved centrifugal impeller must always be operated insidea scroll housing.A dual inlet centrifugal blower shows the same behaviour as two singleinlet blowers operated in parallel: with size, speed and pressure beingidentical, double the air flow is achieved.Operating rangeMiddle part of air performance curve:– Maximum efficiency– Minimal noise– Higher performance density than with the backward curvedcentrifugal fanTo the right and the left of the middle part of the air performance curve:– Reduced efficiency– Increasing noiseThe optimum operating range of the fan is shaded in green in the curvegiven here.Noise / efficiency curve[Pa][%][dB(A)]optimum operating range00[m³/h]Dimensioning of the scrollThe dimensions of a typical scroll can be calculated with the followingformulae, subject to the impeller diameter D:CDB45˚45˚45˚JAK45˚E45˚26˚45˚FHGA = 1.062 · DB = 0.992 · DC = 0.922 · DD = 0.853 · DE = 0.784 · DF = 0.715 · DG = 0.646 · DH = 0.612 · DJ = 0.720 · DK = 0.689 · DR = 0.073 · DAdjusting the dimensions to diminished mounting spaces is possible.R404

TechnologyAC axialA seriesEC axial fansEC axialS seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformationEffects of step diffusersA diffuser mounted on the exhaust side with connected exhaust tunnelincreases air performance and efficiency of the centrifugal blower.Curve[Pa][%]1without step diffuser2with step diffuser121200[m³/h]Effects of obstructions on the intake sideObstructions on the air intake side reduce the air performance of thecentrifugal blower.Curve[Pa]Q-motor1x / D = ESM2x / D = 30 %3x / D = 23 %D45x / D = 15 %x / D = 7.5 %EC-SYSTEMSXX0054321[m³/h]Accessories405Contacts

Effects caused by obstructions on the inlet side for constant air flowEC centrifugal blowersConstant air flow is attained with unimpaired inflow only.An obstructed (e. g. asymmetrical or partially blocked) air flow can have asignificant effect on the curve behaviour and cause large deviations froma constant air flow curve.Examples of obstructed inflowsXInstructions for designing a sufficiently unobstructed inflow:– The distance x between the blower intake and neighbouring walls orobstructions should be at least 25 % of the impeller diameter.– Inflows with angular momentum or asymmetrical rotation should beavoided.– The inflow can be made more uniform using resistances such as thosefrom filters or grilles.On request, we offer calibrated blower designs that incorporate a specificinstallation situation.406

AC axialK seriesTechnologyAC axialA seriesAccessoriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAC axialS seriesAC axial fansGeneralinformationDiagonal fans (axial design)Operating rangeDirectly to the right of the "saddle" (right part of the airperformance curve):– Maximum efficiency– Minimal noiseTo the left of the "saddle" (left part of the air performance curve):– Stall area– Drop in efficiency– Soaring noiseNoise / efficiency curve[Pa][%][dB(A)]The saddle of the diagonal/mixed flow fan is slightly higher than thatof the axial fan. This means that the technical ratings in the optimaloperating range are better than those of the axial fan.The optimum operating range of the fan is shaded in green in thecurve given here.00stall areaoptimum operating range[m³/h]Mounting informationThe conical housing (part of delivery) makes sure the necessary gapdimension is kept.EffectsThe effects of the diagonal/mixed flow fan are similar to those listedfor the axial fan (p. 397-400).407Contacts

Dimensioning / change in speedCurveInfluence of speed n[%]160A change in speed influences:– Air flow VV ~ n100 120 1401.1n1.2n1.4n1.3n– Static pressure increase p fa∆p fa ~ n 2800.9nn– Requirement of energy P 1600.8nP 1 ~ n 3 140400.7n0.6n020020 40 60 80 100 120[%]CurveInfluence of the speed n on the sound level Lw[dB]When the speed changes, the approximate sound level can bedetermined using the diagram to the right and the following formula:Lw 2 - Lw 1 = 50 dB . log (n 2 :n 1 )Lw 1 = Sound level after speed changeLw 2 = Sound level before speed changen 1n 2= Changed speed= Starting speedmodification in sound pressure level-20 -10 0 10 200,511,52 2,5 3factor of speed change408

TechnologyAC axialK seriesAC axialS seriesAC axial fansGeneralinformationCurveInfluence of impeller diameter DA change in impeller diameter influences:– Air flow VV ~ D 3– Static pressure increase ∆p fa∆p fa ~ D 2– Requirement of energy P 1[%]60 80 100 120 140 1600.8D0.9DD1.1D1.2D1.3DAC axialA seriesEC axial fansP 1 ~ D 5400.7D0.6D200020 40 60 80 100 120140EC axialS series[%]Q-motorESMEC-SYSTEMSAccessoriesCurveInfluence of width of air discharge b (only for centrifugal impellers)[%]160A change in width of the air discharge influences, in approximation:– Air flow VV ~ b100 120 140– Static pressure increase ∆p fa∆p fa = const– Requirement of energy P 1P 1 ~ b2040 60 800.7b 0.9b 1.1b 1.3b0.6b 0.8b b 1.2b 1.4b0020 40 60 80 100 120140[%]409Contacts

MotorsMotors made by ebm-papstIn AC and EC technology, ebm-papst relies on the proven external-rotor motor principle, with the rotor turningaround the stator within. Advantages of the ebm-papst external-rotor principle are:– Space saving design due to integrated bearings and direct installation inside the impeller– Lower load and more precise balancing of the bearing due to the fixed connection of all rotating elements– Prolonged service life due to the motor-impeller unit placed right within the air flowThe ebm-papst motors achieve very good results in efficiency and acoustic behaviour when used in EC technology.FeaturesAC motorsEC motorsShaded-pole motorSingle-phasecapacitor motor3-phase motorSingle-core motor3-core motor1 ~ AC voltageconnectorLimited useYes Yes Yes Yes(Steinmetz circuit)3 ~ AC voltageconnectorNoNoYesNoYesDC voltageconnectorNoNoNoYesYesElectronics(see p. 418)Electronics(see p. 418)Design ofcircuit diagram- Stator -Steinmetz circuitRotor principleEfficiencyContinuous speedsetting integratedNoise behaviourSquirrel cage Squirrel cage Squirrel cage Magnetic rotor Magnetic rotorLow Medium GoodExcellent ExcellentNo No NoYes YesMedium Good ExcellentMedium Excellent410

AC axialK seriesAC axialA seriesTechnologyEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesAC axialS seriesAC axial fansGeneralinformationAC motorsAC motors (induction motors) are based in their function on the principleof the asynchronous rotation of the stator rotating field and rotor.Torque curves of the motor types[Ncm]213Shaded-pole motorEach pole of the motor is divided electro-magnetically into a mainand auxiliary pole (split) via a cage winding in order to generate astarting torque.At ebm-papst, shaded-pole motors are available as 2 or 4-polesymmetrical external or internal rotor designs.M SaM St5M K4Key:1 - EC motor5 - System characteristic2 - 3-phase motor M St - Starting torque3 - Single-phase motor M Sa - Saddle torque4 - Shaded-pole motor M K - Breakdown torqueAdvantages:– Extremely robust motor design due to cast squirrel cage rotorand stable bearing system– Cost-efficient motor– Extremely easy to connect– Long service lifeStart-up currentThe start-up current of our AC motors is maximally 4x higher than thenominal current given.411Contacts

Single-phase capacitor motorTwo cores (main winding MW and auxiliary winding AW) generatethe rotating field of the single-phase capacitor motor via a capacitorconnected in series to form an auxiliary winding.3-phase motorThe three motor cores are offset by 120° and generate a circular rotatingfield when connected to the 3-phase mains.c≈70µF/kW(230 VAC ∆)StarDeltaSteinmetz circuitAdvantages:– Extremely robust motor design due to cast squirrel cage rotorand stable bearing system– Diverse options for setting speed– Efficiency between 30 % and 75 % (depending on motor size)– Long service life– Good vibration and noise behaviourAdvantages:– Extremely robust motor design due to cast squirrel cage rotorand stable bearing system– Very good vibration and noise behaviour– Efficiency between 40 % and 80 % (depending on the motor size)– Long service lifeTorque curves of 3-phase motors[Ncm]132Key:1 - Delta2 - Star3 - Steinmetz circuit412

TechnologyAC axialK seriesAC axialA seriesEC axial fansAC axialS seriesAC axial fansGeneralinformationEC motorsEC motors are based in their function on the principle of thesynchronous rotation of stator rotating field and rotor.Torque curves of the motor typesSingle-core motorElectronics[Ncm]321EC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesAdvantages:M K4M SaM St5– Integrated speed setting– Efficiency between 50 % and 80 % (depending on the motor size)– Long service lifeKey:1 - EC motor2 - 3-phase motor3 - Single-phase motor4 - Shaded-pole motor5 - System characteristicM St - Starting torqueM Sa - Saddle torqueM K - Breakdown torque3-core motorElectronicsAdvantages:– Integrated speed setting– Good efficiency between 60 % and 90 %(depending on the motor size)– Long service life– Very good vibration and noise behaviour even incontrolled operation– Can be used as drive motor413Contacts

Control technologyOpen and closed loop control using ebm-papst technologyDepending on the field of application, fan speed has to be adjusted. In AC technology, the speed setting option canresult in an increase in installation expenditure and, typically, a less favourable noise performance and an increase inpower input.Here, ebm-papst EC technology is a more eco-friendly and cost-efficient alternative. The EC motor with integratedcommutation electronics offers high efficiency across the entire speed range and optimal acoustic performanceat minimal installation expenditure.FeaturesACEC commutating electronicsSeries resistanceTransformerSpeed steppingPhase-angle controlPhase-angle controlwith sine filterFrequency inverterFrequency inverterwith sine filterIntegratedIntegrated withswitch powersupplyExternalInstallation + – + – – – – ++ – –Noise behaviour+++–––––+++++Power input––––––++++++Service life++––+–+++++ = positive + + = very positive – = negative – – = very negativeAcoustic performance of controlled motorsPower input of controlled motors[dBA][W]701500605010004050030010002000 3000 4000 5000 6000[CFM]010002000 3000 4000 5000 6000[CFM]20004000 6000 8000 10000 [m³/h]20004000 6000 8000 10000 [m³/h]Key:ebm-papst EC controlsFrequency inverter with sine filterPhase-angle control without sine filterPhase-angle control with sine filterTransformerKey:ebm-papst EC controlsFrequency inverter with sine filterPhase-angle control without sine filterPhase-angle control with sine filterTransformer414

AC axialS seriesAC axial fansGeneralinformationSpeed setting with AC motorsAC axialK seriesSpeed setting helps to optimise power inputand the flow noise as requested.When selecting a voltage controller, note that the nominal current in thepartial load range can be up to 20 % (depending on the controller) abovethe specified maximum current.AC axialA seriesSeries resistanceL1N0123R1R2CAWASM1~MW– Fixed speed steps– Speed setting via change in motor voltage– Cost-efficient– Small capacitiesNote: Capacitors or chokes reduce the loss capacity.EC axial fansPEL1Tr432CAWASM1~Transformer– Fixed speed steps– Speed setting via change in motor voltageEC axialS series1NMWQ-motorPEPhase-angle controlL1NPETrCAWASM1~MW– Continuous speed setting– Speed setting via change in motor voltage– Cost-efficient– Acoustic performance and warming has to be reviewedin the applicationEC-SYSTEMS ESMFrequency inverter with sine filterL1L2L3T1 T3 T5U+VWT2 T4 T6VASM3~UWAccessoriesTechnology– Continuous speed setting– Speed setting via change in frequency of rotating field– High efficiencyNote: An all-pole sine filter (phase-phase and phase-earth)has to be used.PE415Contacts

Electrical connections ACFans (1~ 230 VAC power line)Fans, 1 speed (3~ 230 VAC power line)A1) Single-phase capacitor motorwith TOP wired internallyB) Shaded pole motorwith TOP wired internallyC1) Delta connection (3~ 230 VAC power system)without TOPLTOPPENCU 1 U 2 ZU 1U 2Z= blue= black= brown= green/yellowLTOPPENLN= blue= brown= green/yellowPE L1 L2 L3 U 1 = blackU 2 = greenU 1 V 1 W 1V 1 = blueV 2 = whiteW 1 = brownU 2 V 2 W 2 W 2 = yellow= green/yellowA2a) Single-phase capacitor motorwith connection for external TOPD1) Delta connection (3~ 230 VAC power line)with TOPLPENCU 1 U 2 ZTOPU 1U 2Z= blue= black= brown= green/yellowPE L1 L2 L3 TOP U 1 = blackU 2 = greenU 1 V 1 W 1V 1 = blueV 2 = whiteU 2 V 2 W 2= green/yellowW 1 = brownW 2 = yellowA2b) Single-phase capacitor motorwith connection for external TOPDirection of rotation is reversed by swappingtwo line phases.CU1 Z U2L NPETOP TOPU 1U 2Z= blue= black= brown= green/yellowFanswith terminal box416

AC axialK seriesAC axialS seriesAC axial fansGeneralinformationFans, 1 speed (3~ 400 VAC power line)Fans, 2 speeds via ∆/Y-switch (3~ 400 VAC power line)C2) Star connection (3~ 400 VAC power system)without TOPE1) Delta connection (high speed)without TOPE2) Star connection (low speed)without TOPAC axialA seriesU 1PE L1 L2 L3 U 1 = blackU 2 = greenV 1 W 1V 1 = blueV 2 = whiteW 1 = brownU2V2W2W 2 = yellow= green/yellowD2) Star connection (3~ 400 VAC power line)with TOPPEU 2L1V 2L2U 1 V 1 W 1L3W 2F1a) Delta connection (high speed)with TOPU 1 = blackU 2 = greenV 1 = blueV 2 = whiteW 1 = brownW 2 = yellow= green/yellowPEL1U 1 V 1U2V2L2W 1W2L3U 1U 2V 1V 2W 1W 2F2a) Star connection (low speed)with TOP= black= green= blue= white= brown= yellow= green/yellowEC axial fansEC axialS seriesU 1PE L1 L2 L3 TOP U 1 = blackU 2 = greenV 1 WV11 = blueV 2 = whiteW 1 = brownU2V2W2W 2 = yellow= green/yellowPEU 2L1V 2L2U 1 V 1 W 1L3W 2TOPU 1U 2V 1V 2W 1W 2= black= green= blue= white= brown= yellow= green/yellowPEL1U 1 V 1U2V2L2W 1W2L3TOPU 1U 2V 1V 2W 1W 2= black= green= blue= white= brown= yellow= green/yellowQ-motorESMDirection of rotation is reversed by swappingtwo line phases.F1b) Delta connection (high speed)with TOPU1 V1 W1 W2 U2L1 L2 L3Fanswith terminal boxV2 TOP TOPPEU 1 = blackU 2 = greenV 1 = blueV 2 = whiteW 1 = brownW 2 = yellow= green/yellowF2b) Star connection (low speed)with TOPEC-SYSTEMSAccessoriesTechnologyU 1U 2V 1U1 V1 W1 W2 U2 V2 TOP TOPL1 L2 L3PEV 2W 1W 2Fanswith terminal box= black= green= blue= white= brown= yellow= green/yellowDirection of rotation is reversed by swapping two line phases.417Contacts

Speed setting with EC motorsThe speed of EC motors is set via commutation electronics. Via electroniccircuits and depending on the rotor position, this commutation switchesthe motor currents on and off.Principle of AC-fed commutation electronicsPrinciple of DC-fed commutation electronicsInterfaceControl unitPower unitInterfaceControl unitPower unit0-10 VDCPWMDC/DC transformerEMC filterRectifier0-10 VDCPWMCommutations unitEMC filterFeedbackCommutations unitLink electrolytic capacitorFeedbackCANLONDriveInverter stageCANLONDriveInverter stageRS485RS485(with electrically isolated interface)Integrated commutation electronics– Compact unit– Easy to install– Low installation expenditure– Can be operated all over the worldNote: Motors with 12-72 VDC supply voltage have to be fed viaelectrically isolated supply unit.ACDCIntegrated commutation electronics with switch power supply– Protective extra-low voltage 24 / 48 VDCNote: Switch power supply is not included but has to be orderedas accessory.ACDC418

AC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSTechnologyAccessoriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformationTypical features of the ebm-papst commutation electronics:– Input for analogue and digital signals– Open and closed loop control as well as monitoring of the motor– Integrated EMC filter– High efficiency throughout the entire speed range– Speed setting via linear set value (0-10 VDC) or PWM signal– Low-noise operation across the entire speed range– Minimal extra costs for additional functions(open/closed loop control)– Optional BUS interfaceTypes of alarms and reactions with EC motorsWith DC-fed EC motors, certain faults in modes of operation arerecognised by the electronics, and the motor is automatically restarted.With AC-fed EC motors, certain faults in modes of operation arerecognised by the electronics, and the motor is switched off.The motor restarts automatically after the following failures have beendiagnosed:– Line failure– Phase failure– Line under-voltage– DC link voltage too high or too low– Locked rotorWith the following types of failures, there is no automatic restart.Here, hardware or software reset is required:– Motor temperature too high– Temperature of cooling element or ambient temperature ofelectronics too high– Hall failureHardware resetSwitching off the fan and restarting it after one minute results inhardware reset.Software resetSoftware reset is via ebmBUS and LISA software, hand-held controlterminal, or PDA with Fan Control Software.419Contacts

Electrical connections ECG) EC motors (nominal voltage 24 / 48 VDC)Notes on various control possibilities and their applicationsMaximum ripple± 3.5%red33 K 4.7 KLin/PWM control input0-10 VDC / PWMCounteryellowPWM10 KUControllerAlarmTach outputpulses per revolutionwhiteI sink max. 10 mA680 12 V 12 VSpeed display47 VGNDTemperaturecontrol module50002-1-017450003-1-0174Speed settingPWM 1 - 10 kHz100% PWM -> n=maxapprox. 10% PWM -> n=min< 10% PWM -> n=0Speed settingwithpotentiometerFull speedSpeed setting1 V - 10 V10 V -> n=maxapprox. 1 V -> n=min< 1 V -> n=0bluestart up at > 1.4 Vstart up at > 1.4 VCustomer circuitConnectionFanLine 1+GNDTach0-10 VPWMredbluewhiteyellowLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 + red Maximum ripple ± 3.5 % 1Tach white Tach output:GND blue GND2 pulses / revolution (M1G045 /M1G055)3 pulses / revolution (M1G074/M3G084)0-10 V / PWM yellow Control input (Impedance 100 k)420

TechnologyAC axialA seriesEC axial fansEC axialS seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformationH1) EC motors (size 055, line-fed)I max =10 mAPWMNotes on various control possibilities and their applicationsU min = 15 V12 V10 K+-UMains50/60 HzLbrownNbluePEgreen/yellowVoltage output+10 V max. 1.1 mAredLin/PWM control input0-10 VDC / PWMyellow+-Speed settingPWM 1 - 10 kHz100% PWM -> n=maxapprox. 10% PWM -> n=min< 10% PWM -> n=0Speed settingwith variableresistanceFull speedSpeed setting1 V - 10 V10 V -> n=maxapprox. 1 V -> n=min< 1 V -> n=0CounterControllerAlarmGNDblueTach output1 pulse per revolutionwhiteI sink max. 10 mA680 47 V1 FQ-motorstart up at > 1.4 Vstart up at > 1.4 VSpeed displayCustomer circuitConnectionFanESMLine 1Line 2LbrownNbluePEgreen/yellowEC-SYSTEMSAccessoriesLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 L brown Mains 50/60 Hz, phase 2+10 V red Voltage output +10 V max. 1.1 mAN blue Mains 50/60 Hz, neutral0-10 V / PWM yellow Control input (Impedance 100 k)PE green/yel Protective earthGND blue GND+10 Vred0-10 VPWMyellowGNDblueTachwhiteTach white Tach output: 1 pulse per revolution421Contacts

H2) EC motors (size 055, line-fed and constant air flow)Notes on various control possibilities and their applicationsU min = 15 VI max =10 mAMains50/60 HzLbrownNblue+-PEgreen/yellowPWM12 V10 K+-UVoltage output+10 V max. 1.1 mAredLin/PWM inputfor set value0-10 VDC / PWMyellowAir flow settingPWM 1 - 10 kHz100% PWM -> Vmax17% PWM -> Vmin< 15% PWM -> V= 0m 3 /hAir flow settingwith variableresistanceMax.air flowAir flow setting1 V - 10 V10 V -> Vmax1.7 V -> Vmin< 1.5 V -> V= 0m 3 /hCounterControllerAlarmGNDblueTach output1 pulse per revolutionwhiteI sink max. 10 mA680 47 V1 Fstart up at > 1.4 Vstart up at > 1.4 VSpeed displayCustomer circuitConnectionFanLine 1Line 2LNPE+10 V0-10 VPWMGNDTachbrownbluegreen/yellowredyellowbluewhiteLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 L brown Mains 50/60 Hz, phase 2+10 V redN blue Mains 50/60 Hz, neutralPE green/yel Protective earthVoltage output +10 V max. 1.1 mA0-10 V / PWM yellow Input for set value (impedance 100 k)GNDblueGNDTach white Tach output: 1 pulse per revolution422

TechnologyAC axialA seriesEC axial fansEC axialS seriesAC axialK seriesAC axialS seriesAC axial fansGeneralinformationJ1) EC motors (size 074, line-fed)I max =10 mAPWMNotes on various control possibilities and their applicationsU min = 15 V12 V10 K+-UMains50/60 HzLblackNbluePEgreen/yellowVoltage output+10 V max. 1.1 mAredLin/PWM control input0-10 VDC / PWMyellow+-Speed settingPWM 1 - 10 kHz100% PWM -> n=maxapprox. 10% PWM -> n=min< 10% PWM -> n=0Speed settingwith variableresistanceFull speedSpeed setting1 V - 10 V10 V -> n=maxapprox. 1 V -> n=min< 1 V -> n=0CounterControllerAlarmGNDblueTach output1 pulse per revolutionwhiteI sink max. 10 mA680 47 V1 FQ-motorstart up at > 1.4 Vstart up at > 1.4 VSpeed displayCustomer circuitConnectionFanESMLine 1Line 2LblackNbluePEgreen/yellowEC-SYSTEMSAccessoriesLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 L black Mains 50/60 Hz, phase 2+10 V red Voltage output +10 V max. 1.1 mAN blue Mains 50/60 Hz, neutral0-10 V / PWM yellow Control input (Impedance 100 k)PE green/yel Protective earthGND blue GND+10 Vred0-10 VPWMyellowGNDblueTachwhiteTach white Tach output: 1 pulse per revolution423Contacts

J2) EC motors (size 074, line-fed and constant air flow)Notes on various control possibilities and their applications10 KMains50/60 HzLblackNblue+-PEgreen/yellowPWM12 V10 K+-UVoltage output+10 V max. 1.1 mAredLin/PWM inputfor set value0-10 VDC / PWMyellowSpeed settingPWM 1 - 10 kHz100% PWM -> V=maxapprox. 17% PWM -> V=min< 15% PWM -> V=0Air flow settingwith variableresistanceMax.air flowAir flow setting1 V - 10 V10 V -> V=maxapprox. 1.7 V -> V=min< 1.5 V -> V=0CounterControllerAlarmGNDblueTach output1 pulse per revolutionwhiteI sink max. 10 mA680 47 V1 Fstart up at > 1.4 Vstart up at > 1.4 VSpeed displayCustomer circuitConnectionFanLine 1Line 2LNPE+10 V0-10 VPWMGNDTachblackbluegreen/yellowredyellowbluewhiteLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 L black Mains 50/60 Hz, phase 2+10 V redN blue Mains 50/60 Hz, neutralPE green/yel Protective earthVoltage output +10 V max. 1.1 mA0-10 V / PWM yellow Input for set value (impedance 100 k)GNDblueGNDTach white Tach output: 1 pulse per revolution424

TechnologyAC axialA seriesEC axial fansAC axialK seriesAC axialS seriesAC axial fansGeneralinformationK1) EC motors (size 084, line-fed)I max =10 mAPWMNotes on various control possibilities and their applicationsU min = 15 V12 V10 K+-UMains50/60 HzLblackNbluePEgreen/yellowNCwhite1COMwhite2Voltage outputred +10 Vmax. 1.1 mALin/PWM control inputyellow 0-10 VDC /PWM+-Alarm relay:Break for failure(2 A, 250 VAC, AC1)EC axialS seriesSpeed settingPWM 1 - 10 kHzSpeed settingwith variableresistanceFull speedSpeed setting1 V - 10 VGNDblue1 FQ-motor100% PWM -> n=maxapprox. 10% PWM -> n=min< 10% PWM -> n=010 V -> n=maxapprox. 1 V -> n=min< 1 V -> n=0start up at > 1.4 Vstart up at > 1.4 VCustomer circuitConnectionFanESMLine 1Line 2LblackNbluePEgreen/yellowLine Connection Colour Assignment / function Line Connection Colour Assignment / function1 L black Mains 50/60 Hz, phase 2+10 V red Voltage output +10 V max. 1.1 mAN blue Mains 50/60 Hz, neutral0-10 V / PWM yellow Control input (Impedance 100 k)PE green/yel Protective earthGND blue GNDEC-SYSTEMSNC white1 Alarm relay, break for failureAccessoriesCOM white2 Alarm relay, COMMONNCwhite1COMwhite2+10 Vred0-10 VPWMyellowGNDblue425Contacts

K2) EC motors (size 084/112 with ebmBUS, mains-powered)KL1KL2PENLRS BRS A+15 V0 VConnector Connection Assignment / function Connector Connection Assignment / functionKL1 PEProtective earthKL2 RS B RS485 interface for ebmBUS; RS BN Mains 50/60 Hz, neutralRS A RS485 interface for ebmBUS; RS ALMains 50/60 Hz, phase+15 V Operation: +15 V (50 mA); Alarm: 0 V0 V Operation: 0 V; Alarm: +15 V (50 mA)426

RS ARS BRS ARS BGND0-10 VPWM4-20 mAESMAC axialA seriesEC axial fansAC axialK seriesAC axialS seriesAC axial fansGeneralinformationL1) EC motors (size 112, single-phase mains-powered)KL3 KL2 KL1+20 V+10 V0-10 VPWMGNDOUTNOCOMNCLNPEConnector Connection Assignment / function Connector Connection Assignment / functionPEPE Protective earth KL3 OUTKL1 N Mains 50/60 Hz, neutralKL2LNCCOMNOMains 50/60 Hz, phaseAlarm relay, break for failureAlarm relay, COMMON (2A, 250 VAC, AC1)Alarm relay, make for failureGND GND0-10 V / PWM Control / Actual value input (Impedance 100 k)+10 V+20 V4-20 mA Control / Actual value input0-10 V / PWM Control / Actual value inputGNDRSBRSARSBRSAMaster output 0-10 V max. 3 mASupply for external potentiometer,10 VDC (+10 %) @ 10 mASupply for external sensor,20 VDC (±20 %) @ 50 mAGNDRS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS ARS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS AEC axialS seriesQ-motorL2) EC motors (size 112, three-phase mains-powered)KL3 KL2 KL1RS ARS BRS ARS BGND0-10 VPWM4-20 mA+20 V+10 V0-10 VPWMGNDOUTNOCOMNCL1L2L3PEConnector Connection Assignment / function Connector Connection Assignment / functionPEPE Protective earth KL3 OUTKL1 L3 Mains; L3KL2L2L1NCCOMNOMains; L2Mains; L1Alarm relay, break for failureAlarm relay, COMMON (2A, 250 VAC, AC1)Alarm relay, make for failureGND GND0-10 V / PWM Control / Actual value input (Impedance 100 k)+10 V+20 V4-20 mA Control / Actual value input0-10 V / PWM Control / Actual value inputGNDRSBRSARSBRSAMaster output 0-10 V max. 3 mASupply for external potentiometer,10 VDC (+10 %) @ 10 mASupply for external sensor,20 VDC (±20 %) @ 50 mAGNDEC-SYSTEMSAccessoriesTechnologyRS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS ARS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS A427Contacts

M) EC motors (size 150, three-phase mains-powered)KL3 KL2 KL1RS ARS BRS ARS BGND0-10 VPWM4-20 mA+20 V+10 V0-10 VPWMGNDOUTNOCOMNCL1L2L3PEConnector Connection Assignment / function Connector Connection Assignment / functionPEPE Protective earth KL3 OUTKL1 L3 Mains; L3KL2L2L1NCCOMNOMains; L2Mains; L1Alarm relay, break for failureAlarm relay, COMMON (2A, 250 VAC, AC1)Alarm relay, make for failureGND GND0-10 V / PWM Control / Actual value input (Impedance 100 k)+10 V+20 V4-20 mA Control / Actual value input0-10 V / PWM Control / Actual value inputGNDRSBRSARSBRSAMaster output 0-10 V max. 3 mASupply for external potentiometer,10 VDC (+10 %) @ 10 mASupply for external sensor,20 VDC (±20 %) @ 50 mAGNDRS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS ARS485 interface for ebmBUS; RS BRS485 interface for ebmBUS; RS A428

AC axialK seriesAC axialS seriesAC axial fansGeneralinformationConnection diagram: Condensing pressure control with master-slave fansPC with interfaceconverter (RS485)PressuresensorAlarm relayAC axialA seriesRS ARS BRS ARS BGND0-10 VPWM4-20 mA+20 V+10 V0-10 VPWMGNDOUTNOCOMNCL1L2L3PEMasterMains50/60 HzEC axial fansMains50/60 HzEC axialS seriesRS AQ-motorTechnologyAccessoriesEC-SYSTEMSESMRS BRS ARS BGND0-10 VPWM4-20 mA+20 V+10 V0-10 VPWMGNDOUTNOCOMNCL1L2L3PESlaveMains50/60 HzRS ARS BRS ARS BGND0-10 VPWM4-20 mA+20 V+10 V0-10 VPWMGNDOUTNOCOMNCL1L2L3PESlave429Contacts

fan agentcompact fan agentDistributors, agencies and subsidiariesmotor specialistmotor agentGermanyebm-papstMulfingen GmbH & Co. KGBachmühle 2D-74673 MulfingenPhone +49 (0) 79 38 / 81-0Fax +49 (0) 79 38 / 81-110info1@de.ebmpapst.comebm-papstSt. Georgen GmbH & Co. KGHermann-Papst-Straße 1D-78112 St. GeorgenPhone +49 (0) 77 24 / 81-0Fax +49 (0) 77 24 / 81-13 09info2@de.ebmpapst.comebm-papstLandshut GmbHHofmark-Aich-Straße 25D-84030 LandshutPhone +49 (0) 8 71 / 707-0Fax +49 (0) 8 71 / 707-465info3@de.ebmpapst.comwww.ebmpapst.comwww.ebmpapst.comwww.ebmpapst.comContactsBerlinDipl.-Ing. (TH) Jens DuchowHändelstraße 7D-16341 PanketalPhone +49 (0) 30 / 94 41 49 62Fax +49 (0) 30 / 94 41 49 63Jens.Duchow@de.ebmpapst.comDortmundDipl.-Ing. (FH) Hans-Joachim PundtAuf den Steinern 3D-59519 Möhnesee-VöllinghausenPhone +49 (0) 29 25 / 80 04 07Fax +49 (0) 29 25 / 80 04 08Hans-Joachim.Pundt@de.ebmpapst.comFrankfurtDipl.-Ing. Christian KleffmannDr. Hermann-Krause Straße 23D-63452 HanauPhone +49 (0) 61 81 / 18 98 12Fax +49 (0) 61 81 / 18 98 13Christian.Kleffmann@de.ebmpapst.comHalleDipl.-Ing. (TU) Michael HanningLerchenweg 4D-06120 LieskauPhone +49 (0) 3 45 / 5 51 24 56Fax +49 (0) 3 45 / 5 51 24 57Michael.Hanning@de.ebmpapst.comHamburgIngenieurbüro Breuell GmbHDirk KahlElektroingenieurGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 10Fax +49 (0) 40 / 53 80 92 84Dirk.Kahl@de.ebmpapst.comKasselDipl.-Ing. (FH) Ralph BrückHoherainstraße 38D-35075 GladenbachPhone +49 (0) 64 62 / 40 71 10Fax +49 (0) 64 62 / 40 71 11Ralph.Brueck@de.ebmpapst.comKoblenzWinfried SchaeferHinter der Kirch 10D-56767 UersfeldPhone +49 (0) 26 57 / 16 96Fax +49 (0) 26 57 / 16 76Winfried.Schaefer@de.ebmpapst.comMunichDipl.-Wirt.-Ing. (FH) Jens PeterSteinbergweg 6D-82285 HattenhofenPhone +49 (0) 81 45 / 80 92 25Fax +49 (0) 81 45 / 80 92 26Jens.Peter@de.ebmpapst.comNurembergFriedrich KleinAdlerstraße 49/1D-73540 HeubachPhone +49 (0) 71 73 / 49 83Fax +49 (0) 71 73 / 80 53Friedrich.Klein@de.ebmpapst.comOffenburgDipl.-Ing (FH) Ralf BraunHubeneck 21D-77704 OberkirchPhone +49 (0) 78 02 / 98 22 52Fax +49 (0) 78 02 / 98 22 53Ralf.Braun@de.ebmpapst.comStuttgartDipl.-Ing. (FH) Rudi WeinmannMühlhaldenweg 13D-73207 PlochingenPhone +49 (0) 71 53 / 92 89 80Fax +49 (0) 71 53 / 92 89 81Rudi.Weinmann@de.ebmpapst.comUlmGünter WilhelmAllgäuer Straße 7D-89269 VöhringenPhone +49 (0) 73 06 / 92 46 08Fax +49 (0) 73 06 / 92 46 48Guenter.Wilhelm@de.ebmpapst.comDistributorsFrankfurtR.E.D. Handelsgesellschaft mbHGutenbergstraße 3D-63110 Rodgau - JügesheimPhone +49 (0) 61 06 / 84 10Fax +49 (0) 61 06 / 84 11 11info@red-elektromechanik.dewww.red-elektromechanik.deHamburgBreuell + Hilgenfeldt GmbHGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 20Fax +49 (0) 40 / 53 80 92 84info@breuell.deMunichA. Schweiger GmbHOhmstraße 1D-82054 SauerlachPhone +49 (0) 81 04 / 8 97 0Fax +49 (0) 81 04 / 8 97 90info@schweiger-gmbh.dewww.schweiger-gmbh.com(1 to 5 pieces)NorthBreuell + Hilgenfeldt GmbHGrützmühlenweg 40D-22339 HamburgPhone +49 (0) 40 / 53 80 92 20Fax +49 (0) 40 / 53 80 92 84ebm@breuell.deSouthHDS Ventilatoren Vertriebs GmbHGlaswiesenstraße 1D-74677 DörzbachPhone +49 (0) 79 37 / 80 29 68Fax +49 (0) 79 37 / 80 25 78info@hds-gmbh.net430

AC axialK seriesAC axialS seriesAC axial fansGeneralinformationEuropeAustriaebm-papst Motoren & Ventilatoren GmbHWestbahnstraße 5A-4490 St. FlorianPhone +43 / 72 24 / 66 01 10Fax +43 / 72 24 / 66 01 120info@at.ebmpapst.comwww.ebmpapst.atBelarusebm-papst Bel AgmbHProspekt Nesavisimosti 11/2 Zimmer 325, 512BY-220050 MinskPhone +375 / 17 / 209 95 61Fax +375 / 17 / 209 95 61info@by.ebmpapst.comBelgiumVIBO Benelux B. V.Sales office Belgium-LuxembourgRomeinsestraat 6/0101Research Park HaasrodeB-3001 Heverlee-LeuvenPhone +32 / 16 / 39 62 00Fax +32 / 16 / 39 62 20info@vibobenelux.comwww.vibobenelux.comBulgariaebm-papst Romania S.R.L.Str. Tirnavei Nr. 20RO-500327 BrasovPhone +40 / 268 / 312 805Fax +40 / 268 / 312 805dudasludovic@xnet.roCroatiaebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 94office@hu.ebmpapst.comwww.ebmpapst.huCyprusMATERO LTD37, St. Kyriakides AvenueP.O. Box 51744CY-3080 LimassolPhone +357 / 25 / 87 00 30Fax +357 / 25 / 38 13 66matero@cytanet.com.cywww.matero.com.cyAC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAccessoriesTechnologyCzech Republic / Slovakiaebm-papst CZ s.r.o.Krátká 379CZ-66461 Rajhradice u BrnaPhone +420 / 5 / 47 23 26 16Fax +420 / 5 / 47 23 26 22info@ebmpapst.czwww.ebmpapst.czDenmarkJenk A/SVallensbækvej 21DK-2605 BrøndbyPhone +45 / 43 / 63 11 11Fax +45 / 43 / 63 05 05jenk@jenk.dkwww.jenk.dkEstoniaebm-papst OyEesti FiliaalKadaka tee 3EST-10621 TallinnPhone +372 / 655 / 6978Fax +372 / 655 / 6979Finlandebm-papst OyPuistotie 1FIN-02760 EspooPhone +358 / 9 / 88 70 22 0Fax +358 / 9 / 88 70 22 13mailbox@ebmpapst.fiwww.ebmpapst.fiFranceebm-papst SARLZI Nord - rue A. MohlerBP 62F-67212 Obernai-CedexPhone +33 / 820 326 266Fax +33 / 3 / 88 67 38 83info@ebmpapst.frwww.ebmpapst.frGreeceHelcomaTh. Rotas & Co OEDavaki 65GR-17672 Kallithea-AttikiPhone +30 / 210 / 951 37 05Fax +30 / 210 / 951 34 90contact@helcoma.grwww.helcoma.grHungaryebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 94office@hu.ebmpapst.comwww.ebmpapst.huIcelandRJ EngineersStangarhyl 1AIS-110 ReykjavikPhone +354 / 567 80 30Fax +354 / 567 80 15rj@rj.iswww.rj.isIrelandebm-papst LimitedPortlaoise Business & Technology ParkMountrath RoadIRL-Portlaoise, Co. LaoisPhone +353 / 57 86 / 643 43Fax +353 / 57 86 / 643 46sales@ie.ebmpapst.comwww.ebmpapst.ieItalyebm-papst SrlVia Cornaggia 108I-22076 Mozzate (Co)Phone +39 / 03 31 / 83 62 01Fax +39 / 03 31 / 82 15 10info@it.ebmpapst.comwww.ebmpapst.itMacedoniaebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 94office@hu.ebmpapst.comwww.ebmpapst.huNetherlandsVIBO Benelux B. V.Engelseweg 127Postbus 230NL-5705 AC HelmondPhone +31 / 4 92 / 50 29 00Fax +31 / 4 92 / 50 29 50verkoop@vibobenelux.comwww.vibobenelux.com431Contacts

fan agentcompact fan agentDistributors, agencies and subsidiariesmotor specialistmotor agentNorwayebm-papst ASP.B. 173 HolmliaN-1203 OsloPhone +47 / 22 / 76 33 40Fax +47 / 22 / 61 91 73mailbox@ziehl-ebm.nowww.ziehl-ebm.noPolandebm-papst Polska Sp. z o.o.ul. Annopol 4APL-03236WarszawaPhone +48 / 22 / 675 78 19Fax +48 / 22 / 676 95 87office@ebmpapst.plwww.ebmpapst.plPortugalebm-papst (Portugal), LdaAv. Marechal Gomes da Costa, 35 eRua Conselheiro Emidio NavarroP-1800-255 LisboaPhone +351 / 21 / 839 48 80Fax +351 / 21 / 839 47 59info@pt.ebmpapst.comRomaniaebm-papst Romania S.R.L.Str. Tirnavei Nr. 20RO-500327 BrasovPhone +40 / 268 / 312 805Fax +40 / 268 / 312 805dudasludovic@xnet.roRussiaebm-papst Ural GmbHRosa Luxembourg Strasse 59RU-620026 JekaterinburgPhone +7 / 343 / 378 31 75Fax +7 / 343 / 378 31 89Konstantin.Molokov@ru.ebmpapst.comwww.ebmpapst.ur.ruebm-papst Rus GmbHNizhegorodskaya 32, str. 15 office 420RU-109029 MoskauPhone +7 / 495 / 671 53 93Fax +7 / 495 / 671 53 95info@ebmpapst.ruwww.ebmpapst.ruebm-papst RusSaint-Petersburg´s FilialZastavskaya 7RU-196084 Sankt-PetersburgPhone +7 / 812 / 449 96 07Fax +7 / 812 / 449 96 07spb@ru.ebmpapst.comSerbia & Montenegroebm-papst Industries Kft.Mátyás u. 1/AH-2220 VecsésPhone +36 / 29 / 55 01 90Fax +36 / 29 / 55 01 94office@hu.ebmpapst.comwww.ebmpapst.huSpainebm-papst Ibérica S.L.Avda. del Sistema Solar, 29E-28830 San Fernando de Henares (Madrid)Phone +34 / 91 / 678 08 94Fax +34 / 91 / 678 15 30ventas@ebmpapst.esSwedenZiehl-ebm ABÄggelundavägen 2S-17562 JärfällaPhone +46 / 8 / 761 94 00Fax +46 / 8 / 36 23 06info@ebmpapst.sewww.ebmpapst.seSwitzerlandebm-papst AGRütisbergstraße 1CH-8156 OberhasliPhone +41 / 44 / 732 20 70Fax +41 / 44 / 732 20 77verkauf@ebmpapst.chwww.ebmpapst.chTurkeyAkantel Elektronik San. Tic. LTD. Sti.Atatürk Organize SanayiBölgesi 10007 SK. No.:6TR-35620 Cigli-IzmirPhone +90 / 2 32 / 32 82 090 -91Fax +90 / 2 32 / 32 80 270akantel@akantel.com.trwww.akantel.com.trUkraineebm-papst Ukraine LLCLepse Boulevard, 4, Building 47UA-03067 KievPhone +38 / 044 / 206 30 91Fax +38 / 044 / 206 30 91mail@ebmpapst.uawww.ebmpapst.uaUnited Kingdomebm-papst UK Ltd.Chelmsford Business ParkGB-Chelmsford Essex CM2 5EZPhone +44 / 12 45 / 46 85 55Fax +44 / 12 45 / 46 63 36sales@uk.ebmpapst.comwww.ebmpapst.co.ukebm-papst Automotive & Drives (UK) Ltd.The SmithyFidlers Lane, East IlsleyGB-Berkshire RG20 7LGPhone +44 / 87 07 / 66 51 70Fax +44 / 87 07 / 66 51 80A&Dsales@uk.ebmpapst.comwww.ebmpapst-ad.com432

AmericaArgentiniaebm-papst de Argentina S.A.Hernandarias 148 Lomas del MiradorPcia. de Buenos Aires (1752)Phone +54 / 11 46 57 61 35Fax +54 / 11 46 57 20 92ventas@ar.ebmpapst.comBrasilebm-papst Motores Ventiladores Ltda.Rua Francisco D´Amico, 155Bairro PirajussaraBR-06785-290 Taboão da Serra-SPPhone +55 /11 / 41 38 50 90Fax +55 /11 / 41 38 50 86vendas@br.ebmpapst.comwww.ebmpapst.com.brCanadaebm-papst Canada Inc.1800 Ironstone Manor, Unit 2CDN-Pickering, Ontario, L1W3J9Phone +1 / 905 / 420 / 35 33Fax +1 / 905 / 420 / 37 72sales@ca.ebmpapst.comwww.ebmpapst.caMexicoebm Industrial S.de R.L. de C.V.Paseo de Tamarindos 400-A-5 to PisoCol. Bosques de las LomasMEX-Mexico 05120, D.F.Phone +52 / 55 / 50 91 44 44Fax +52 / 55 / 50 91 44 43sales@mx.ebmpapst.comwww.ebmpapst.com.mxUSAebm-papst Inc.P.O. Box 4009100 Hyde RoadUSA-Farmington, CT 06034Phone +1 / 860 / 674 15 15Fax +1 / 860 / 674 85 36sales@us.ebmpapst.comwww.ebmpapst.usebm-papst Automotive & Drives, Inc.3200 Greenfield, Suite 255USA-Dearborn, MI 48120Phone +1 / 313 / 406 80 80Fax +1 / 313 / 406 80 81automotive@us.ebmpapst.comwww.ebmpapst-automotive.usAfricaSouth Africaebm-papst South Africa (Pty) Ltd.P.O. Box 31241119 Yacht AvenueZA-2040 HoneydewPhone +27 / 11 / 794 34 34Fax +27 / 11 / 794 50 20info@za.ebmpapst.comwww.ebmpapst.co.zaTechnologyAccessoriesAC axialK seriesAC axialA seriesEC axial fansEC axialS seriesQ-motorESMEC-SYSTEMSAC axialS seriesAC axial fansGeneralinformation433Contacts

fan agentcompact fan agentDistributors, agencies and subsidiariesmotor specialistmotor agentAsiaChinaebm-papst Ventilator (Shanghai) Co., Ltd.No. 418, Huajing RoadWaiGaoQiao Free Trade ZoneNo. 2001, Yang Gao (N) RoadVRC-200131 Shanghai, P.R. of ChinaPhone +86 / 21 / 50 46 01 83Fax +86 / 21 / 50 46 11 19sales@cn.ebmpapst.comHong Kongebm-papst Ventilator (Shanghai) Co., Ltd.Hong Kong Representative OfficeUnit Nos. 13, 9/F, Technology Park18 On Lai Street, Sha Tin, N.T.HK-Hong Kong P.R. of ChinaPhone +852 / 21 45 / 86 78Fax +852 / 21 45 / 76 78chenghong@cn.ebmpapst.comIndiaebm NADI International Pvt Ltd.26/3, G.N.T. Road, ErukkencherryIND-Chennai-600118Phone +91 / 44 / 25 37 25 56Fax +91 / 44 / 25 37 11 49ebmnadi@md2.vsnl.net.inwww.ebmnadi.comIndonesiaebm-papst IndonesiaRepresentative OfficeJalan Puri Kencana, Blok K7/3TRI-Jakarta 11610Phone +62 / 21 / 582 / 31 18Fax +62 / 21 / 582 / 31 17sonny.sanjaya@id.ebmpapst.comIsraelPolak Bros. Import Agencies Ltd.9 Hamefalsim StreetIL-Kiryat Arie, Petach-Tikva 49514Phone +972 / 3 / 910 03 00Fax +972 / 3 / 579 66 79polak@polak.co.ilJapanebm-papst Industries Japan K.K.12 Floor, Benex S-3 Bldg.3-20-8 Shinyokohama, Kohoku-kuJ-222-0033 YokohamaPhone +81 / 45 / 470 / 57 51Fax +81 / 45 / 470 / 57 52info@jp.ebmpapst.comwww.ebmpapst.jpKoreaebm-papst Korea Co. Ltd.6F, Trutec Bldg.B 6-2, Digital Media City (DMC)Sangam-Dong, Mapo-GuROK-Seoul 121-270Phone +82 / 2 / 36 62 / 13 24Fax +82 / 2 / 36 62 / 13 26info@kr.ebmpapst.comwww.ebmpapst.co.krMalaysiaebm-papst MalaysiaRepresentative OfficeBlock F1, 9A-4, Jalan PJU 1/42Dataran PrimaMAL-47301 Petaling JayaPhone +60 / 3 / 78 06 54 40Fax +60 / 3 / 78 06 54 41john.bulder@my.ebmpapst.comSingaporeebm-papst SEA Pte. Ltd.23 Ubi Road 4, #05-00Olympia Industrial BuildingSGP-Singapore 408620Phone +65 / 68 42 84 38Fax +65 / 68 42 84 39salesdept@sg.ebmpapst.comTaiwanETECO Engineering & Trading Corp.10F-I, No. 92, Teh-Wei Str.RC-Tsow-Inn District, KaohsiungPhone +886 / 7 / 557 42 68Fax +886 / 7 / 557 27 88eteco@ms22.hinet.netThailandebm-papst Thailand Co. Ltd.Representative Office99/349 Chaeng Wattana Road, LaksiBangkok 10210, ThailandPhone +66 / 2 / 576 / 15 24-5Fax +66 / 2 / 576 / 15 42salesdept@th.ebmpapst.comUnited Arab Emiratesebm-papst Middle East FZEPO Box 17755Jebel Ali Free Zone / FZS1 / AP05UAE-DubaiPhone +971 / 4 / 886 08 26Fax +971 / 4 / 886 08 27info@ae.ebmpapst.com434

AustraliaAustraliaebm-papst Australia Pty Ltd.2 Silverton CloseAUS-Laverton North, Victoria, 3026Phone +61 / 3 / 83 25 64 00Fax +61 / 3 / 83 25 64 64sales@ebmpapst.com.auwww.ebmpapst.com.auNew Zealandebm-papst Australia Pty Ltd.102 Henderson Valley RoadNZ-Henderson, Auckland 1230Phone +64 / 9 / 837 18 84Fax +64 / 9 / 837 18 99sales@ebmpapst.com.auwww.ebmpapst.com.au435

37779-7-8811 • KO-08/07-10,8’Printed in Germanyebm-papstMulfingen GmbH & Co. KGebm-papstSt.Georgen GmbH & Co. KGebm-papstLandshut GmbHBachmühle 2D-74673 MulfingenPhone +49 (0)7938 / 81-0Fax +49 (0)7938 / 81-110info1@de.ebmpapst.comHermann-Papst-Straße 1D-78112 St.GeorgenPhone +49 (0)7724 / 81-0Fax +49 (0)7724 / 81-1309info2@de.ebmpapst.comHofmark-Aich-Straße 25D-84030 LandshutPhone +49 (0)871/ 707-0Fax +49 (0)871/ 707-465info3@de.ebmpapst.comwww.ebmpapst.com