25.08.2015 Views

EQUIPMENT

Operating Manual - Loctite® Equipment

Operating Manual - Loctite® Equipment

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

3Operation, cont.Low Level Indicator:The Low Level Indicator is operated by a limit valve (LV3) which is in turn operated by theCartridge Pusher air cylinder as it nears the forward end of its stroke. The indicator changescolor from “Green” to “Red” when activated. Immediately after color change, there is about30cc of product remaining in the cartridge.NOTE:This is an indicator only.It does not shut down the Pump-A-Bead II or provide a low level signal.The Low Level indicator will also display “Red” when the main air supply is “Off”.Shutdown Procedure:Idle Time (weekends, holidays, etc.)With an uncontaminated pumping system and dispense valve, the system can remain idle forup to (60) days at 68°F while filled with Loctite ® Gasket Eliminator ® Products.System shutdown for these intervals is as follows;Move the “Dispense Valve” selector to the “Open” position. This opens the Dispense Valve,moving its poppet off its seat. This reduces the chances of product curing in the valve.Move the “Cartridge” selector to the “Retract” position. This removes pressure from theproduct in the cartridge.Move the “Air/Pilot” selector to the “Off” position. This removes the compressed airsupply from the Pump-A-Bead II. The Low Level Indicator will show “Red” with nocompressed air supply.13

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!