EQUIPMENT

1 Please observe the following1.1 Emphasized Sections☞WARNING!Refers to safety regulations and required safety measures that protect the operator or otherpersons from injury or danger to life.Caution!Emphasizes what must be done or avoided so that the unit or other property is not damaged.Notice:Gives recommendations for better handling of the unit during operation or adjustment as well asfor service activities.1.2 For Your SafetyIMPORTANT! DO NOT OPERATE THE UNIT BEFORE READING THIS SECTION.The Loctite ® ZETA ® 7401 UV cure system is a source of long wavelength ultraviolet light used tocure light sensitive products. The system incorporates UV shielding and a non-reflective worksurface. It is safe when installed and used properly. The following guidelines should be followedat all times to ensure protection from the ultraviolet light.1. UV protective glasses with side shields should be worn when working with and around thelamp system. Glasses should meet ANSI Z87.1 certification.2. Potentially exposed skin should be covered. Long sleeves and protective gloves should beworn when placing and removing parts from under the lamp.3. Never look directly at the output from the lamp or directly into the lamp/reflector.4. Do not operate the ZETA ® 7401 without cover in place and secured properly.UV safety is the responsibility of the user, especially when operating the model ZETA ® 7401 in anon-standard configuration. When in doubt about UV safety, consult a Loctite technical specialistat 1-800-LOCTITE (562-8483).1.3 List of Parts Supplied• UV Chamber• Power Cord• UV Protective Eye wear• Cotton Gloves• Operators Manual• Reusable Shipping Box and Foam Packaging1