PLATINUM DDL

ICD Magnet Ways
Kollmorgen
PLATINUM ® DDL
Magnet assemblies are modular and can be installed in multiples of same or alternate lengths (see page 24). Standard assembly lengths are shown below.
MCDxx-0064
50.0 ±.05
(1.968 ±.002)
63.3 ±.15
(2.492 ±.006)
25.0
(.984)
6.65
(.262)
A
A
5.0
(.197)
Ø5.110-5.135 (.201-.202)
THRU 2 PL. MARKED "A"
FOR RECOMMENDED 5mm M6
LOCATING PINS
STAINLESS STEEL MAGNET COVER
Ø4.7 (.185) THRU
+0.25
C'BORE 8.3 (.327) X 1.6 -0.00 (.063) DP.
2 PL. LOCATED AS SHOWN
RECOMMENDED MOUNTING HARDWARE:
M4 SOCKET CAP DIN 912
8-32 SOCKET CAP SCREW
"W2"
±.08 "W"
(.003) ±.25(0.010)
"J"
"H"
±.25(0.010)
Type “W” “W2” “J” “H”
MCD030-0064-001 55.0 (2.165) 45.0 (1.772) 4.0 (.157) 8.25 (.325)
MCD050-0064-001 75.0 (2.953) 65.0 (2.559) 4.0 (.157) 8.25 (.325)
MCD075-0064-001 100.0 (3.937) 90.0 (3.543) 4.0 (.157) 8.25 (.325)
MCD100-0064-001 125.0 (4.921) 115.0 (4.528) 4.0 (.157) 8.25 (.325)
Dimensions in mm(in)
MCDxx-0128
6.65
(.262)
25.0
(.984)
A
127.3 ±.15
(5.012 ±.006)
114.0 ±.05
(4.488 ±.002)
A
5.0
(.197)
Ø5.110-5.135 (.201-.202)
THRU 2 PL. MARKED "A"
FOR RECOMMENDED 5mm M6
LOCATING PINS
Ø4.7 (.185) THRU +0.25
C'BORE 8.3 (.327) X 1.6 -0.00 (.063) DP.
4 PL. LOCATED AS SHOWN
RECOMMENDED MOUNTING HARDWARE:
M4 SOCKET CAP DIN 912
8-32 SOCKET CAP SCREW
"W2"
±.08
(.003)
"W"
±.25
(0.010)
STAINLESS STEEL MAGNET COVER
64.0
(2.520)
2 PL.
"J" "H" ±.25 (0.010)
Type “W” “W2” “J” “H”
MCD030-0128-001 55.0 (2.165) 45.0 (1.772) 4.0 (.157) 8.25 (.325)
MCD050-0128-001 75.0 (2.953) 65.0 (2.559) 4.0 (.157) 8.25 (.325)
MCD075-0128-001 100.0 (3.937) 90.0 (3.543) 4.0 (.157) 8.25 (.325)
MCD100-0128-001 125.0 (4.921) 115.0 (4.528) 4.0 (.157) 8.25 (.325)
Dimensions in mm(in)
DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and
disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.
22
Tel
: 540 633•3400 Web site : www.DanaherMotion.com