PLATINUM DDL

Application Sizing Worksheet
Kollmorgen
PLATINUM ® DDL
Customer:
Contact:
Telephone:
fax:
Project Name:
Axis Name:
Prepared by:
E-Mail:
Move
Axis Orientation Horizontal Vertical
Typical Move mm in
Total Travel Length mm in
Typical Move Time
seconds
Maximum Speed meters/sec inches/sec
Minimum Speed meters/sec inches/sec
Max. Acceleration meters/sec 2 inches/sec 2 g
or Accel/Decel Time
seconds
Dwell Time
seconds
Move Profile trapezoidal triangular S-curve
Loads
Friction Coefficient
Max Load Mass kg lb
Thrust force N lbf
Is this thrust force present during Accel/Decel? Yes No
Precision
Repeatability µm inch
Absolute Accuracy µm inch
Resolution µm inch
Encoder Feedback
Signal period µm
Resolution lines/mm lines/in
Electronic Interpolation Yes No If Yes, Multiplication Factor:
Environment
Ambient Temperature °C ° F
Max Permissible Temperature Rise °C ° F
Clean Room Environment Yes No If yes Class:
Is Water or Air cooling permissible? Yes No
Vacuum? Yes No Pressure:
Amplifier & Power Supply
Max Voltage
VDC
Max Current
Amps
Power Supply Single Phase Three phase
Voltage V 50 Hz 60 Hz
Also see MOTIONEERING ® , Danaher Motion’s Application Sizing Program.
DANAHER MOTION is a registered trademark of Danaher Corporation. Danaher Motion makes every attempt to ensure accuracy and reliability of the specifications in this publication. Specifications are subject to change without notice. Danaher Motion provides this information "AS IS" and
disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. It is the responsibility of the product user to determine the suitability of this product for a specific application. ©2004 Danaher Motion.
64
Tel
: 540 633•3400 Web site : www.DanaherMotion.com