selos
fasis - Wieland
fasis - Wieland
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>selos</strong> BIT<br />
Busbar<br />
Accumulating and isolating the neutral potential<br />
• Combining the neutral conductors of the individual circuits<br />
through the neutral busbar up to a current load of 140 A.<br />
• Connection of the busbar’s neutral potential to the<br />
ground-fault circuit interrupter or supply for the distribution<br />
unit with connector clamp WAK in 16 or 35 mm 2 .<br />
• Safe and stable 3D positioning of the<br />
neutral busbar through busbar support with end clamping<br />
function.<br />
Cross connectors<br />
Jumpering the terminal blocks<br />
• Choice between insulated and uninsulated cross connectors.<br />
• Touch-proof insulated cross connectors according to IP 20<br />
without additional actions.<br />
• Uninsulated cross connectors require covers to make them<br />
touch-proof.<br />
• Jumper bars as additional jumpering option are inserted into<br />
the clamping body together with the conductor.<br />
Cover<br />
Partition plates<br />
Marking live potentials<br />
• Marking of live components for greater safety.<br />
• For terminal blocks that remain live when the main switch is<br />
disconnected (DIN VDE 0113).<br />
• The snap-on cover can only be removed with a tool.<br />
Potential isolation<br />
• Rated voltage can be applied to adjacent uninsulated cross<br />
connectors.<br />
• Can be mounted later on without loss due to separation<br />
• The snap-on partition plate can only be removed with a tool.<br />
Marking system<br />
Clearly mark all clamping points<br />
• Marking tags easily readable even with the wires connected.<br />
• Clear assignment of wire to termination point on wiring.<br />
• Simplified troubleshooting for maintenance.<br />
• Individual marking with the wiemarc and wieplot<br />
marking system.<br />
Material<br />
Selection of high-quality materials<br />
• Special alloys en able low contact resistance and provide<br />
a gas-tight contact area:<br />
– Clamping spring: steel, zinc-plated and dichromated<br />
– Busbar: tin-plated copper<br />
• Polyamide has excellent electrical, chemical and<br />
mechanical characteristics:<br />
– Temperature resistance: up to 120 °C<br />
– Creepage resistance: CTI 600<br />
– Flammability class: self-extinguishing, UL94-V0<br />
33