Humboldt Catalog - Soil-Field Section - Comlibris

More documents

Recommendations

Info

<strong>Soil</strong>— Lab 36 Compactors All Molds on facing page can be used with H-4169 compactors, except H-4142 H-4170A H-4160A H-4169 Standard Compaction Hammer— H-4160A Manual, Moisture/Density Hammer meets ASTM and AASHTO Specs. It incorporates a 5.5 lb (2.54kg) weight and a drop of 12" (305mm) with a 2" (50.8) face. Guide sleeve has four vent holes in each end of sleeve to release built-up air pressure. Machined Steel, plated for rust resistance. Features resilient rubber ball handle. ASTM D558, D698, AASHTO T99. Shipping wt. 12 lbs. (5.4kg) Modified Compaction Hammer— H-4170A Manual, Moisture/Density Hammer meets AASHTO Specs. It incorporates a 10 lb (4.5kg) weight and a drop of 18" (457mm) with a 2" (50.8) face. Guide sleeve has four vent holes in each end of sleeve to release built-up air pressure. Machined steel, plated for rust resistance. Features resilient rubber ball handle. AASHTO T180. Shipping wt. 18 lbs. (8.3kg) H-4173 1.800.544.7220 • www.humboldtmfg.com Automatic Mechanical Compactor— H-4169 Automatic Mechanical Compactor, 230V, 50/60 Hz— H-4169.4F The Mechanical Compactor automatically compacts and rotates mold after each blow while keeping track of the number of hammer blows and shutting off once a preset number of blows is reached. The start/stop function of the compactor is independent of the counter. The unit can be used to perform standard or modified compaction tests using a 5.5 lb. (2.5kg) hammer with 12" (305mm) height of drop or a 10 lb. ((4.5kg) hammer with 18" (457mm) drop. Hammer lift compensates the height of the drop for soil thickness in the mold during compaction. Hammer weight is concentrated at the foot, allowing free fall of the hammer. Hammer changes are made from in front of the compactor. Included with the compactor are: (1) 5.5 lb (2.5kg) hammer; (1) 10 lb. (4.5kg) pie-shaped hammer; (1) hammer surcharge weight to convert hammers to 10lb (4.5kg); (1) hammer safety device; (1) 4" (102mm) mold, and (1) 6" (152mm) mold. Overall dimensions: 56"H x 16-1/2"W x 30"D (1422 x 419 x 762mm). Max. height in operation: 66" (1677mm). Meets ASTM D558, D559, D560, D698, D1557; AASHTO T99, T134, T135, T180. Shipping wt. 432 lbs. (196.0kg) California Modified Automatic Compactor,— H-4169.CA Model complies with California Method 216 and is supplied with a 2" round 10 lb hammer and corresponding piston and rod. Required Split Mold is available upon request. Calibration Kit— H-4169CK For use with H-4169 Automatic Mechanical Compactor. Calibration kit includes lead deformation apparatus, micrometer and 50 lead calibration cylinders. Meets ASTM D2168. Lead Calibration Cylinders, pkg. 100— H-4169LC Replacement Hammers (do not include weights) 4" Round Hammer (New Style)— H-4169.2415 6" Pie-Shape Hammer (New Style)— H-4169.2416 (New Style Hammers are only threaded in the middle of the shaft) 4" Round Hammer (Old Style)— H-4169.415 6" Pie-Shape Hammer (Old Style)— H-4169.416 (Old Style Hammers are threaded almost to the end of the shaft) Manual Compaction Hammers Weight Drop Model 5.5 lb (2.54kg) 12" (305mm) H-4160A 10 lb (4.5kg) 18" (457mm) H-4170A 5.5 lb (2.54kg) 12" (305mm) H-4173 10 lb (5.08kg) 12" (305mm) H-4171 Army Corps of Engineers Hammer— H-4173 Manual, Moisture/Density Hammer meets EM1110-1-1804 Spec. It incorporates a 5.5 lb (2.54kg) weight and a drop of 12" (305mm) with a 2" (50.8) face. Hammer is guided on shaft. Length of drop is slightly adjustable. Foot assembly has recoil mechanism to reduce impact fatigue on parts. Tamping face is removable and replaceable. Shipping wt. 15 lbs. (6.8kg) Army COE 10 lb. Hammer— H-4171 Same as above, but 10 lb (5.08kg)
www.humboldtmfg.com • 1.800.544.7220 Compaction, 2.8" Split Mold 2.8" ID x 4" H with 2" detachable collar Standard Proctor Density/Moisture, 4" 4" ID x 4.584" H with 2" detachable collar Standard Proctor Density/Moisture 4" Split Mold 4" ID x 4.584" H 2" detachable collar CBR w/Perf. Base 6" ID x 7" H with 2" detachable collar Solid Base 6" ID x 7" H with 2" detachable collar Compaction 6" ID x 6.1" H with 2" detachable collar LBR 6" ID x 6" H with 2" detachable collar Modified Proctor, 6" Split Mold 6" ID x 4.584" H with 2" detachable collar H-4142— Mold volume of .0214 cu. ft., cold-rolled steel tubing, plated for rust resistance. Mold has vertical split in body with 2 quick-acting clamps for easy removal of specimen. Used for permeability testing of remolded samples. Shipping wt. 10 lbs. (5.5kg) H-4141— Mold volume of 1/30 cu. ft., cold-rolled steel tubing, plated for rust resistance. Includes detachable base plate, studs and wing nuts. ASTM D558, D698, D1557 AASHTO T99, T134, T180 Shipping wt. 16 lbs. (7.3kg) H-4225— Mold volume of 1/30 cu. ft., cold-rolled steel tubing, plated for rust resistance. Includes detachable base plate, studs and wing nuts. Mold has vertical split in body with 2 quick-acting clamps for easy removal of specimen. ASTM D558, D698, D1557, AASHTO T99, T134, T180 Shipping wt. 17 lbs. (7.7kg) H-4151— Mold volume of .1145 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. ASTM D1883, AASHTO T193, Shipping wt. 22 lbs. (10kg) H-4149— Same as H-4151, but with solid base. Shipping wt. 22 lbs. (10kg) H-4159— Mold volume of 1/10 cu. ft., cold-rolled steel tubing, plated for rust resistance. Steel base plate is 8" x 8" x 1/2" thick. Shipping wt. 22 lbs. (10kg) H-4163— Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Collar extension and perforated base plate can be clamped on either end of cylinder. LBR requires H-4147 spacer, sold separately. See page 41. Shipping wt. 22 lbs. (10kg) H-4161— Mold volume of 1/13.33 cu. ft., cold-rolled steel tubing, plated for rust resistance. Mold has vertical split in body with 2 quick-acting clamps for easy removal of specimen. Steel base plate is 8" x 8" x 1/2" thick. ASTM D698, D1557, AASHTO T99, T180, Shipping wt. 16 lbs. (7.3kg) H-4151 H-4159 Modified Proctor, 6" H-4162— Mold volume of 1/13.33 cu. ft., cold-rolled steel 6" ID x 4.584" H tubing, plated for rust resistance. Steel base plate is 8" x 8" x 1/2" with 2" detachable collar thick. ASTM D698, D1557, AASHTO T99, T180, Shipping wt. 15 lbs. (6.8kg) H-4162 Compaction Molds H-4141 H-4225 H-4149 H-4142 H-4163 H-4161 <strong>Soil</strong>— Lab 37
Page 1 and 2: www.humboldtmfg.com • 1.800.544.7
Page 33: www.humboldtmfg.com • 1.800.544.7
Page 75: www.humboldtmfg.com • 1.800.544.7

Humboldt Catalog - Soil-Field Section - Comlibris

Create successful ePaper yourself

Delete template?

Save as template?