Publications

Pickup V-Box Features:
• 4-bolt relubeable bearing
Options:
• Inverted V
• Hold down kit
• Vertical hopper extensions
• 7’ and 10’ lengths
• Electric throttle control
• Battery
• Center high-mount stop light
• Hydraulic drive auger in lieu of chain
MSV and MV V-Box Spreaders
The Monroe V-Box Spreader is designed
and built for long lasting, heavy duty,
reliable service. Both models, MSV and
MV, are available in mild steel, and 304
stainless steel with 100% continuouslywelded
construction. A choice of slidein
or chassis-mount is offered, in sizes
ranging from 8’ to 17’.
MSV Features :
• Tip-up spinner assembly
• 4-bolt flange bearings
• 2” idler shaft
• Spring-loaded chain take-up bearing
• Front and rear wipers
• Rear diverter chute
• Replaceable chain shields, 10 gauge
• 3/8” x 1-1/2” bar flights
• 50:1 or 25:1 gearbox with 2” drive shaft
• Top screens
MV Features :
• Bolt-on spinner assembly
• 4-Bolt flange bearings
• 1-1/2” idler shaft
• Spring-loaded chain take-up bearing
• Front and rear wipers
• Rear diverter chute
• Formed chain shields, 10 gauge
• 1/4” x 1-1/2” bar flights
• 50:1 or 25:1 gearbox with 1-1/2” drive
shaft
• Top screens
Pre-wetting Systems
Pre-wetting is increasing in popularity
with up to 40% savings in granular
materials being reported when pre-wetting
with liquids deicing chemicals.
Pre-wetting Systems Features:
• Hydraulic and electric systems available
• 15 to 400 gallon tank capacities
• Simple on/off systems to closed-loop
system
• Mounting hardware available in powdercoated
mild steel or stainless steel
For more information contact your local
branch of Commercial Truck Equipment,
or visit: www.comtruck.ca
24 EQUIPMENT REVIEW
ALL NEW www.equipmentreview.ca
Fall 2013 EQUIPMENT REVIEW 25