TRIKE WINGS

More documents

Recommendations

Info

Fig.31 Fig.31A Check that no reflex wire is looped underneath a more inboard batten (Fig.32). 21 Fig.32
3.9. Check that the top rear wire, the keel mount webbing, and bottom rear wires are safely secured to the keel tube using the nut and the safety ring (Fig.33). Fig.33 3.10. Check all bolts, nuts and the safety rings which secure the downtubes to the channel. Make sure that the channel to the keel and hang detail are secured (Fig.34, 35). 22
Page 1 and 2: TRIKE WINGS “Stranger” & “Str
Page 3 and 4: 2
Page 5 and 6: Section 2. SET UP PROCEDURE 2.1. SE
Page 7 and 8: Fig.6 If the marking is erased plac
Page 9 and 10: 2.2.5A. For Stream and Stranger 2:
Page 11 and 12: NOTE: Two longest battens are not r
Page 13 and 14: Fig.17 Fig.18 Remove the rope from
Page 15 and 16: For Stranger Fig.21 2.2.14. Put the
Page 17 and 18: Antares hang units Fig.24 2.2.16. I
Page 19 and 20: 3.2. Look through the nose hole and
Page 21: Fig.30 Fig. 30A Check that the wash
Page 25 and 26: Fig.36 3.13. Fit the nose cone over
Page 27 and 28: 4.1.2. Checking the sail surface an
Page 29 and 30: Section 6. TURNING 6.1. FINE TUNING
Page 31 and 32: Section 7. LOG BOOK TABLE OF FLIGHT
Page 43: 13 6,5 0 0 STG.B.134.000 WASHOUT ST
Page 48 and 49: 2 1 3 Parts List Item Qty Name Mate
Page 50 and 51: 2 2 1 Parts List Item Qty Name Mate

TRIKE WINGS

Create successful ePaper yourself

Delete template?

Save as template?