TRIKE WINGS

Fig.3
Remove the 6-mm bolts from the leading edge tube and put them through the grommets on the
sail. Put these bolts through the holes in the channel inside the leading edge tube. Replace the
plastic sadles and metal washers on the bolts from the other side of the tube. Manually secure
bolts d=6 mm with selflocking nuts (Fig.4, 5).
Fig.4
Fig.5
2.1.6. Rotate the bolt which is on the axle of the leading edge tube until the plastic sadles align
according to the markings on the tube. (Fig.6).
5