SONANCE PRODUCTS

OPTILINQ ® CONNECTOR BLOCKS
PART# ................ 91353
QUANTITY ......... EACH
CB1 ONE-ZONE CONNECTING BLOCK
One-Zone Connecting Block mounts in SnapTrack ® and provides jacks for receiver,
4 emitters, and a power supply. Boating and RV compatible. Does not require a
power supply when used as an emitter expander.
SPECIFICATIONS
Inputs:
Outputs:
Series Resistors:
Power Requirements:
Power Jack:
Dimensions (W x H x D):
Shipping Weight:
1 x screw type 4-terminal plug, 1 x IR Receiver
(3.5mm stereo mini jack)
4 parallel-driven emitter ports (3.5mm mono
mini jacks)
470-ohm resistor in series with each emitter
12 V DC, uses PS1or PS2 power supply
2.1mm
2 3 ⁄8" x 3 ⁄4" x 3" (60mm x 19mm x 76mm)
4.5 oz (0.127kg)
PART# ................ 91354
QUANTITY ......... EACH
ACB1 ONE-ZONE AMPLIFIED CONNECTING BLOCK
Designed for installations requiring multiple IR emitters. Provides strong IR signals.
Mounts in SnapTrack ® . Feedback/status LED. Boating and RV compatible.
SPECIFICATIONS
Inputs:
Outputs:
Power Requirements:
Power Jack:
Series Resistors:
Dimensions (W x H x D):
Shipping Weight:
1 x screw-type 4-terminal plug;
1 x IR receiver 3.5mm stereo mini jack
10 x parallel-driven emitter ports (3.5mm mini jacks);
1 high-level IR signal output port (3.5mm mini jack)
12VDC, uses PS1 or PS2 Power Supply
2.1mm
100 ohms or 470 ohms on each emitter output
(selectable with included jumpers), for high and low
power operation
5 7 ⁄16" x 7 ⁄ 8" x 3" (138mm x 22mm x 76mm)
10.2 oz (0.29 kg)
PART# ................ 91355
QUANTITY ......... EACH
CB2Z TWO-ZONE CONNECTING BLOCK
Budget two-zone system routes IR from each zone to a dedicated receiver or preamp.
Compatible with both the CB1 and ACB1 connecting blocks for common emitter
expansion for source equipment. Mounts in SnapTrack ® . Boating and RV compatible.
SPECIFICATIONS
Inputs:
Outputs:
Power Requirements:
Power Jack:
Dimensions (W x H x D):
Shipping Weight:
2 x 4-screw removable connectors to interface with
all 3 lead IR receivers
2 x zone emitter ports (3.5mm mini jacks);
1 common emitter port (3.5mm mini jack)
12VDC, uses PS1 or PS2 Power Supply
2.1mm
2 3 ⁄8" x 3 ⁄4" x 3" (60mm x 19mm x 76mm)
4.5 oz (0.128 kg)
148