Circular Saw Blades

Sizing Saw Blades
102678
Sizing Saw Blades HW „TR-F“ - hook angle 10°
Product
Drawing
tungsten carbide [HW]
Machine / Application Design Advantages Notes
Ι table saws
Ι vertical panel sizing saws
Ι for sizing cuts in plasticlaminated
panels
Ι tooth configuration: triple chip
/ flat "TR-F"
Ι cutting material: HW HL Board
06
Ι noise-reduction thanks to laser
ornaments
Ι larger bore (max. Ø 50 mm)
available for a surcharge
Ø D B b Ø d Z NL Ident-No.
250 3,2 2.2 30 80 2/7/42 + 2/9,5/46,5 + 2/10/60 189984 $
300 3,2 2.2 30 72 2/7/42 + 2/9,5/46,5 + 2/10/60 189985 $
300 3,2 2.2 30 96 2/7/42 + 2/9,5/46,5 + 2/10/60 189986 $
350 3,5 2.5 30 96 2/7/42 + 2/9,5/46,5 + 2/10/60 189987
[mm] [mm] [mm] [mm]
102678
Sizing Saw Blades HW „TR-F“ - hook angle 5°
Product
Drawing
tungsten carbide [HW]
Machine / Application Design Advantages Notes
Ι table saws
Ι vertical panel sizing saws
Ι for sizing cuts in plasticlaminated
panels
Ι tooth configuration: triple chip
/ flat "TR-F"
Ι cutting material: HW HL Board
06
Ι improved bottom edge (without
scoring sawblade) thanks to 5
degree hook angle
Ι noise-reduction thanks to laser
ornaments
Ι larger bore (max. Ø 50 mm)
available for a surcharge
Ø D B b Ø d Z NL Ident-No.
250 3,2 2.2 30 80 2/7/42 + 2/9,5/46,5 + 2/10/60 189988
300 3,2 2.2 30 96 2/7/42 + 2/9,5/46,5 + 2/10/60 189989 $
[mm] [mm] [mm] [mm]
1–13